| Message ID | 20240410112418.6400-22-wsa+renesas@sang-engineering.com |
|---|---|
| State | New |
| Headers | show |
| Series | i2c: remove printout on handled timeouts | expand |
diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c index e905734c26a0..133d02899c6b 100644 --- a/drivers/i2c/busses/i2c-bcm-iproc.c +++ b/drivers/i2c/busses/i2c-bcm-iproc.c @@ -811,8 +811,6 @@ static int bcm_iproc_i2c_xfer_wait(struct bcm_iproc_i2c_dev *iproc_i2c, } if (!time_left && !iproc_i2c->xfer_is_done) { - dev_err(iproc_i2c->device, "transaction timed out\n"); - /* flush both TX/RX FIFOs */ val = BIT(M_FIFO_RX_FLUSH_SHIFT) | BIT(M_FIFO_TX_FLUSH_SHIFT); iproc_i2c_wr_reg(iproc_i2c, M_FIFO_CTRL_OFFSET, val);
I2C and SMBus timeouts are not something the user needs to be informed about on controller level. The client driver may know if that really is a problem and give more detailed information to the user. The controller should just pass this information upwards. Remove the printout. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> --- drivers/i2c/busses/i2c-bcm-iproc.c | 2 -- 1 file changed, 2 deletions(-)