diff --git a/Documentation/devicetree/bindings/connector/ge,sunh-addon-connector.yaml b/Documentation/devicetree/bindings/connector/ge,sunh-addon-connector.yaml
new file mode 100644
index 000000000000..68d7d7d7cf7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/connector/ge,sunh-addon-connector.yaml
@@ -0,0 +1,177 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/connector/ge,sunh-addon-connector.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GE SUNH hotplug add-on connector
+
+maintainers:
+  - Luca Ceresoli <luca.ceresoli@bootlin.com>
+
+description: |
+  Represent the physical connector present on GE SUNH devices that allows
+  to attach and detach at runtime an add-on adding peripherals on
+  non-discoverable busses. Peripherals on the add-on include I2C sensors
+  and a video bridge controlled via I2C.
+
+  The connector has status GPIOs to notify the connection status to the CPU
+  and a reset GPIO to allow the CPU to reset all the peripherals on the
+  add-on. It also has I2C busses and a 4-lane MIPI DSI bus.
+
+  Different add-on models can be connected, each having different
+  peripherals. For this reason each add-on has a model ID stored in a
+  non-volatile memory, which is accessed in the same way on all add-ons.
+
+  Add-on removal can happen at any moment under user control and without
+  prior notice to the CPU, making all of its components not usable
+  anymore. Later on, the same or a different add-on model can be connected.
+
+properties:
+  compatible:
+    const: ge,sunh-addon-connector
+
+  reset-gpios:
+    description: An output GPIO to reset the peripherals on the
+      add-on. Active low.
+    maxItems: 1
+
+  plugged-gpios:
+    description: An input GPIO that is asserted if and only if an add-on is
+      physically connected. Active low.
+    maxItems: 1
+
+  devices:
+    description: |
+      A container for devices not accessible via any data bus. Common use
+      cases include fixed and GPIO regulators, simple video panels and LED
+      or GPIO backlight devices. When not hot-pluggable, nodes such devices
+      are children of the root node.
+
+      This node should not be present in the connector description in the
+      base device tree. It should be added by overlays along with a subnode
+      per device.
+
+    type: object
+    additionalProperties: true
+
+  dsi:
+    type: object
+    additionalProperties: false
+
+    properties:
+      ports:
+        $ref: /schemas/graph.yaml#/properties/ports
+
+        description: |
+          OF graph bindings modeling the MIPI DSI bus across the connector. The
+          connector splits the video pipeline in a fixed part and a removable
+          part.
+
+          The fixed part of the video pipeline includes all components up to
+          the display controller and 0 or more bridges. The removable part
+          includes any bridges and any other components up to the panel.
+
+        properties:
+          port@0:
+            $ref: /schemas/graph.yaml#/properties/port
+            description:
+              The last point of the non-removable part of the MIPI DSI bus
+              line. The remote-endpoint sub-node must point to the last
+              non-removable video component of the video pipeline.
+
+          port@1:
+            $ref: /schemas/graph.yaml#/properties/port
+            description:
+              The first point of the removable part of the MIPI DSI bus
+              line.  The remote-endpoint sub-node must point to the first
+              video pipeline component on the add-on. As it describes the
+              hot-pluggable hardware, the endpoint node cannot be filled
+              until an add-on is detected, so this node needs to be added
+              by a device tree overlay at runtime.
+
+        required:
+          - port@0
+          # port@1 is added by the overlay for any add-on using the DSI lines
+
+    required:
+      - ports
+
+patternProperties:
+  '^i2c-(dbat|gp|btp)$':
+    description:
+      An I2C bus that goes through the connector. The adapter (and possibly
+      some clients) are on the fixed side. Add-ons that have any clients on
+      this bus have to be added by the add-on overlay, inside this node.
+
+    $ref: /schemas/i2c/i2c-controller.yaml#
+    unevaluatedProperties: false
+    type: object
+
+    properties:
+      i2c-parent:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description:
+          Phandle pointing to the I2C bus controller on the fixed side that
+          drives this bus
+
+required:
+  - compatible
+  - i2c-dbat
+  - i2c-gp
+  - i2c-btp
+  - dsi
+
+unevaluatedProperties: false
+
+examples:
+  # This is the description of the connector as it should appear in the
+  # main DTS describing the "main" board up to the connector. This is
+  # supposed to be used together with the overlays that describe the add-on
+  # components.
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    addon-connector {
+        compatible = "ge,sunh-addon-connector";
+        reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+        plugged-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+        powergood-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+
+        i2c-dbat {
+            i2c-parent = <&i2c5_ch2>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            // device subnodes to be added by overlays
+        };
+
+        i2c-gp {
+            i2c-parent = <&i2c4>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            // device subnodes to be added by overlays
+        };
+
+        i2c-btp {
+            i2c-parent = <&i2c3>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            // device subnodes to be added by overlays
+        };
+
+        dsi {
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    endpoint {
+                        remote-endpoint = <&previous_bridge_out>;
+                    };
+                };
+
+                // port@1 to be added by overlay
+            };
+        };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index cc40a9d9b8cd..b939284d1350 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10270,6 +10270,11 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml
 F:	drivers/iio/pressure/mprls0025pa*
 
+HOTPLUG CONNECTOR FOR GE SUNH ADDONS
+M:	Luca Ceresoli <luca.ceresoli@bootlin.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/connector/ge,sunh-addon-connector.yaml
+
 HP BIOSCFG DRIVER
 M:	Jorge Lopez <jorge.lopez2@hp.com>
 L:	platform-driver-x86@vger.kernel.org
