diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c
index 0152e4fa088c..60a7cb040af7 100644
--- a/drivers/input/keyboard/adp5588-keys.c
+++ b/drivers/input/keyboard/adp5588-keys.c
@@ -439,10 +439,9 @@ static int adp5588_gpio_add(struct adp5588_kpad *kpad)
 	kpad->gc.owner = THIS_MODULE;
 
 	if (device_property_present(dev, "interrupt-controller")) {
-		if (!kpad->client->irq) {
-			dev_err(dev, "Unable to serve as interrupt controller without interrupt");
-			return -EINVAL;
-		}
+		if (!kpad->client->irq)
+			return dev_err_probe(dev, -EINVAL,
+					     "Unable to serve as interrupt controller without interrupt");
 
 		girq = &kpad->gc.irq;
 		gpio_irq_chip_set_chip(girq, &adp5588_irq_chip);
@@ -453,10 +452,8 @@ static int adp5588_gpio_add(struct adp5588_kpad *kpad)
 	mutex_init(&kpad->gpio_lock);
 
 	error = devm_gpiochip_add_data(dev, &kpad->gc, kpad);
-	if (error) {
-		dev_err(dev, "gpiochip_add failed: %d\n", error);
-		return error;
-	}
+	if (error)
+		return dev_err_probe(dev, error, "gpiochip_add failed\n");
 
 	for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) {
 		error = adp5588_read(kpad->client,
@@ -680,21 +677,19 @@ static int adp5588_fw_parse(struct adp5588_kpad *kpad)
 		return 0;
 	}
 
-	if (!client->irq) {
-		dev_err(&client->dev, "Keypad configured but no IRQ present\n");
-		return -EINVAL;
-	}
+	if (!client->irq)
+		return dev_err_probe(&client->dev, -EINVAL,
+				     "Keypad configured but no IRQ present\n");
 
 	ret = matrix_keypad_parse_properties(&client->dev, &kpad->rows,
 					     &kpad->cols);
 	if (ret)
 		return ret;
 
-	if (kpad->rows > ADP5588_ROWS_MAX || kpad->cols > ADP5588_COLS_MAX) {
-		dev_err(&client->dev, "Invalid nr of rows(%u) or cols(%u)\n",
-			kpad->rows, kpad->cols);
-		return -EINVAL;
-	}
+	if (kpad->rows > ADP5588_ROWS_MAX || kpad->cols > ADP5588_COLS_MAX)
+		return dev_err_probe(&client->dev, -EINVAL,
+				     "Invalid nr of rows(%u) or cols(%u)\n",
+				     kpad->rows, kpad->cols);
 
 	ret = matrix_keypad_build_keymap(NULL, NULL, kpad->rows, kpad->cols,
 					 kpad->keycode, kpad->input);
@@ -714,11 +709,10 @@ static int adp5588_fw_parse(struct adp5588_kpad *kpad)
 		return 0;
 	}
 
-	if (kpad->nkeys_unlock > ARRAY_SIZE(kpad->unlock_keys)) {
-		dev_err(&client->dev, "number of unlock keys(%d) > (%zu)\n",
-			kpad->nkeys_unlock, ARRAY_SIZE(kpad->unlock_keys));
-		return -EINVAL;
-	}
+	if (kpad->nkeys_unlock > ARRAY_SIZE(kpad->unlock_keys))
+		return dev_err_probe(&client->dev, -EINVAL,
+				     "number of unlock keys(%d) > (%zu)\n",
+				     kpad->nkeys_unlock, ARRAY_SIZE(kpad->unlock_keys));
 
 	ret = device_property_read_u32_array(&client->dev, "adi,unlock-keys",
 					     kpad->unlock_keys,
@@ -735,11 +729,10 @@ static int adp5588_fw_parse(struct adp5588_kpad *kpad)
 		 * part of keypad matrix to be used and if a reliable way of
 		 * using GPIs is found, this condition can be removed/lightened.
 		 */
-		if (kpad->unlock_keys[i] >= kpad->cols * kpad->rows) {
-			dev_err(&client->dev, "Invalid unlock key(%d)\n",
-				kpad->unlock_keys[i]);
-			return -EINVAL;
-		}
+		if (kpad->unlock_keys[i] >= kpad->cols * kpad->rows)
+			return dev_err_probe(&client->dev, -EINVAL,
+					     "Invalid unlock key(%d)\n",
+					     kpad->unlock_keys[i]);
 
 		/*
 		 * Firmware properties keys start from 0 but on the device they
@@ -761,10 +754,9 @@ static int adp5588_probe(struct i2c_client *client)
 	u8 id;
 
 	if (!i2c_check_functionality(client->adapter,
-				     I2C_FUNC_SMBUS_BYTE_DATA)) {
-		dev_err(&client->dev, "SMBUS Byte Data not Supported\n");
-		return -EIO;
-	}
+				     I2C_FUNC_SMBUS_BYTE_DATA))
+		return dev_err_probe(&client->dev, -EIO,
+				     "SMBUS Byte Data not Supported\n");
 
 	kpad = devm_kzalloc(&client->dev, sizeof(*kpad), GFP_KERNEL);
 	if (!kpad)
@@ -814,11 +806,9 @@ static int adp5588_probe(struct i2c_client *client)
 	input->id.version = revid;
 
 	error = input_register_device(input);
-	if (error) {
-		dev_err(&client->dev, "unable to register input device: %d\n",
-			error);
-		return error;
-	}
+	if (error)
+		return dev_err_probe(&client->dev, error,
+				     "unable to register input device\n");
 
 	error = adp5588_setup(kpad);
 	if (error)
@@ -833,11 +823,9 @@ static int adp5588_probe(struct i2c_client *client)
 						  adp5588_hard_irq, adp5588_thread_irq,
 						  IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
 						  client->dev.driver->name, kpad);
-		if (error) {
-			dev_err(&client->dev, "failed to request irq %d: %d\n",
-				client->irq, error);
-			return error;
-		}
+		if (error)
+			return dev_err_probe(&client->dev, error,
+					     "failed to request irq %d\n", client->irq);
 	}
 
 	dev_info(&client->dev, "Rev.%d controller\n", revid);
