diff --git a/drivers/input/misc/iqs269a.c b/drivers/input/misc/iqs269a.c
index eca680bf8c20..4e7b46d30052 100644
--- a/drivers/input/misc/iqs269a.c
+++ b/drivers/input/misc/iqs269a.c
@@ -9,6 +9,7 @@
  * axial sliders presented by the device.
  */
 
+#include <linux/completion.h>
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/err.h>
@@ -144,10 +145,6 @@
 #define IQS269_NUM_CH				8
 #define IQS269_NUM_SL				2
 
-#define IQS269_ATI_POLL_SLEEP_US		(iqs269->delay_mult * 10000)
-#define IQS269_ATI_POLL_TIMEOUT_US		(iqs269->delay_mult * 500000)
-#define IQS269_ATI_STABLE_DELAY_MS		(iqs269->delay_mult * 150)
-
 #define iqs269_irq_wait()			usleep_range(200, 250)
 
 enum iqs269_local_cap_size {
@@ -289,10 +286,10 @@ struct iqs269_private {
 	struct mutex lock;
 	struct iqs269_switch_desc switches[ARRAY_SIZE(iqs269_events)];
 	struct iqs269_sys_reg sys_reg;
+	struct completion ati_done;
 	struct input_dev *keypad;
 	struct input_dev *slider[IQS269_NUM_SL];
 	unsigned int keycode[ARRAY_SIZE(iqs269_events) * IQS269_NUM_CH];
-	unsigned int delay_mult;
 	unsigned int ch_num;
 	bool hall_enable;
 	bool ati_current;
@@ -979,13 +976,8 @@ static int iqs269_parse_prop(struct iqs269_private *iqs269)
 
 	general = be16_to_cpu(sys_reg->general);
 
-	if (device_property_present(&client->dev, "azoteq,clk-div")) {
+	if (device_property_present(&client->dev, "azoteq,clk-div"))
 		general |= IQS269_SYS_SETTINGS_CLK_DIV;
-		iqs269->delay_mult = 4;
-	} else {
-		general &= ~IQS269_SYS_SETTINGS_CLK_DIV;
-		iqs269->delay_mult = 1;
-	}
 
 	/*
 	 * Configure the device to automatically switch between normal and low-
@@ -1042,7 +1034,6 @@ static int iqs269_parse_prop(struct iqs269_private *iqs269)
 
 static int iqs269_dev_init(struct iqs269_private *iqs269)
 {
-	unsigned int val;
 	int error;
 
 	mutex_lock(&iqs269->lock);
@@ -1058,14 +1049,12 @@ static int iqs269_dev_init(struct iqs269_private *iqs269)
 	if (error)
 		goto err_mutex;
 
-	error = regmap_read_poll_timeout(iqs269->regmap, IQS269_SYS_FLAGS, val,
-					!(val & IQS269_SYS_FLAGS_IN_ATI),
-					 IQS269_ATI_POLL_SLEEP_US,
-					 IQS269_ATI_POLL_TIMEOUT_US);
-	if (error)
-		goto err_mutex;
+	/*
+	 * The following delay gives the device time to deassert its RDY output
+	 * so as to prevent an interrupt from being serviced prematurely.
+	 */
+	usleep_range(2000, 2100);
 
-	msleep(IQS269_ATI_STABLE_DELAY_MS);
 	iqs269->ati_current = true;
 
 err_mutex:
@@ -1077,10 +1066,8 @@ static int iqs269_dev_init(struct iqs269_private *iqs269)
 static int iqs269_input_init(struct iqs269_private *iqs269)
 {
 	struct i2c_client *client = iqs269->client;
-	struct iqs269_flags flags;
 	unsigned int sw_code, keycode;
 	int error, i, j;
-	u8 dir_mask, state;
 
 	iqs269->keypad = devm_input_allocate_device(&client->dev);
 	if (!iqs269->keypad)
@@ -1093,23 +1080,7 @@ static int iqs269_input_init(struct iqs269_private *iqs269)
 	iqs269->keypad->name = "iqs269a_keypad";
 	iqs269->keypad->id.bustype = BUS_I2C;
 
-	if (iqs269->hall_enable) {
-		error = regmap_raw_read(iqs269->regmap, IQS269_SYS_FLAGS,
-					&flags, sizeof(flags));
-		if (error) {
-			dev_err(&client->dev,
-				"Failed to read initial status: %d\n", error);
-			return error;
-		}
-	}
-
 	for (i = 0; i < ARRAY_SIZE(iqs269_events); i++) {
-		dir_mask = flags.states[IQS269_ST_OFFS_DIR];
-		if (!iqs269_events[i].dir_up)
-			dir_mask = ~dir_mask;
-
-		state = flags.states[iqs269_events[i].st_offs] & dir_mask;
-
 		sw_code = iqs269->switches[i].code;
 
 		for (j = 0; j < IQS269_NUM_CH; j++) {
@@ -1122,13 +1093,9 @@ static int iqs269_input_init(struct iqs269_private *iqs269)
 			switch (j) {
 			case IQS269_CHx_HALL_ACTIVE:
 				if (iqs269->hall_enable &&
-				    iqs269->switches[i].enabled) {
+				    iqs269->switches[i].enabled)
 					input_set_capability(iqs269->keypad,
 							     EV_SW, sw_code);
-					input_report_switch(iqs269->keypad,
-							    sw_code,
-							    state & BIT(j));
-				}
 				fallthrough;
 
 			case IQS269_CHx_HALL_INACTIVE:
@@ -1144,14 +1111,6 @@ static int iqs269_input_init(struct iqs269_private *iqs269)
 		}
 	}
 
-	input_sync(iqs269->keypad);
-
-	error = input_register_device(iqs269->keypad);
-	if (error) {
-		dev_err(&client->dev, "Failed to register keypad: %d\n", error);
-		return error;
-	}
-
 	for (i = 0; i < IQS269_NUM_SL; i++) {
 		if (!iqs269->sys_reg.slider_select[i])
 			continue;
@@ -1211,6 +1170,9 @@ static int iqs269_report(struct iqs269_private *iqs269)
 		return error;
 	}
 
+	if (be16_to_cpu(flags.system) & IQS269_SYS_FLAGS_IN_ATI)
+		return 0;
+
 	error = regmap_raw_read(iqs269->regmap, IQS269_SLIDER_X, slider_x,
 				sizeof(slider_x));
 	if (error) {
@@ -1273,6 +1235,12 @@ static int iqs269_report(struct iqs269_private *iqs269)
 
 	input_sync(iqs269->keypad);
 
+	/*
+	 * The following completion signals that ATI has finished, any initial
+	 * switch states have been reported and the keypad can be registered.
+	 */
+	complete_all(&iqs269->ati_done);
+
 	return 0;
 }
 
@@ -1304,6 +1272,9 @@ static ssize_t counts_show(struct device *dev,
 	if (!iqs269->ati_current || iqs269->hall_enable)
 		return -EPERM;
 
+	if (!completion_done(&iqs269->ati_done))
+		return -EBUSY;
+
 	/*
 	 * Unsolicited I2C communication prompts the device to assert its RDY
 	 * pin, so disable the interrupt line until the operation is finished
@@ -1560,7 +1531,9 @@ static ssize_t ati_trigger_show(struct device *dev,
 {
 	struct iqs269_private *iqs269 = dev_get_drvdata(dev);
 
-	return scnprintf(buf, PAGE_SIZE, "%u\n", iqs269->ati_current);
+	return scnprintf(buf, PAGE_SIZE, "%u\n",
+			 iqs269->ati_current &&
+			 completion_done(&iqs269->ati_done));
 }
 
 static ssize_t ati_trigger_store(struct device *dev,
@@ -1580,6 +1553,7 @@ static ssize_t ati_trigger_store(struct device *dev,
 		return count;
 
 	disable_irq(client->irq);
+	reinit_completion(&iqs269->ati_done);
 
 	error = iqs269_dev_init(iqs269);
 
@@ -1589,6 +1563,10 @@ static ssize_t ati_trigger_store(struct device *dev,
 	if (error)
 		return error;
 
+	if (!wait_for_completion_timeout(&iqs269->ati_done,
+					 msecs_to_jiffies(2000)))
+		return -ETIMEDOUT;
+
 	return count;
 }
 
@@ -1647,6 +1625,7 @@ static int iqs269_probe(struct i2c_client *client)
 	}
 
 	mutex_init(&iqs269->lock);
+	init_completion(&iqs269->ati_done);
 
 	error = regmap_raw_read(iqs269->regmap, IQS269_VER_INFO, &ver_info,
 				sizeof(ver_info));
@@ -1682,6 +1661,22 @@ static int iqs269_probe(struct i2c_client *client)
 		return error;
 	}
 
+	if (!wait_for_completion_timeout(&iqs269->ati_done,
+					 msecs_to_jiffies(2000))) {
+		dev_err(&client->dev, "Failed to complete ATI\n");
+		return -ETIMEDOUT;
+	}
+
+	/*
+	 * The keypad may include one or more switches and is not registered
+	 * until ATI is complete and the initial switch states are read.
+	 */
+	error = input_register_device(iqs269->keypad);
+	if (error) {
+		dev_err(&client->dev, "Failed to register keypad: %d\n", error);
+		return error;
+	}
+
 	error = devm_device_add_group(&client->dev, &iqs269_attr_group);
 	if (error)
 		dev_err(&client->dev, "Failed to add attributes: %d\n", error);
