diff mbox series

[v2,1/4] Input: iqs7222 - configure power mode before triggering ATI

Message ID ZKrpHc2Ji9qR25r2@nixie71
State New
Headers show
Series Add support for Azoteq IQS7222D | expand

Commit Message

Jeff LaBundy July 9, 2023, 5:06 p.m. UTC 
If the device drops into ultra-low-power mode before being placed
into normal-power mode as part of ATI being triggered, the device
does not assert any interrupts until the ATI routine is restarted
two seconds later.

Solve this problem by adopting the vendor's recommendation, which
calls for the device to be placed into normal-power mode prior to
being configured and ATI being triggered.

The original implementation followed this sequence, but the order
was inadvertently changed as part of the resolution of a separate
erratum.

Fixes: 1e4189d8af27 ("Input: iqs7222 - protect volatile registers")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
---
 drivers/input/misc/iqs7222.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/input/misc/iqs7222.c b/drivers/input/misc/iqs7222.c
index 096b0925f41b..acb95048e823 100644
--- a/drivers/input/misc/iqs7222.c
+++ b/drivers/input/misc/iqs7222.c
@@ -1381,9 +1381,6 @@  static int iqs7222_ati_trigger(struct iqs7222_private *iqs7222)
 	if (error)
 		return error;
 
-	sys_setup &= ~IQS7222_SYS_SETUP_INTF_MODE_MASK;
-	sys_setup &= ~IQS7222_SYS_SETUP_PWR_MODE_MASK;
-
 	for (i = 0; i < IQS7222_NUM_RETRIES; i++) {
 		/*
 		 * Trigger ATI from streaming and normal-power modes so that
@@ -1561,8 +1558,11 @@  static int iqs7222_dev_init(struct iqs7222_private *iqs7222, int dir)
 			return error;
 	}
 
-	if (dir == READ)
+	if (dir == READ) {
+		iqs7222->sys_setup[0] &= ~IQS7222_SYS_SETUP_INTF_MODE_MASK;
+		iqs7222->sys_setup[0] &= ~IQS7222_SYS_SETUP_PWR_MODE_MASK;
 		return 0;
+	}
 
 	return iqs7222_ati_trigger(iqs7222);
 }