@@ -306,18 +306,13 @@ static void perf_close_imc_mem_bw(void)
}
/*
- * get_mem_bw_imc: Memory band width as reported by iMC counters
- * @cpu_no: CPU number that the benchmark PID is binded to
- * @bw_report: Bandwidth report type (reads, writes)
- *
- * Memory B/W utilized by a process on a socket can be calculated using
- * iMC counters. Perf events are used to read these counters.
+ * perf_open_imc_mem_bw - Open perf fds for IMCs
+ * @cpu_no: CPU number that the benchmark PID is binded to
*
* Return: = 0 on success. < 0 on failure.
*/
-static int get_mem_bw_imc(int cpu_no, char *bw_report, float *bw_imc)
+static int perf_open_imc_mem_bw(int cpu_no)
{
- float reads, writes, of_mul_read, of_mul_write;
int imc, ret;
for (imc = 0; imc < imcs; imc++) {
@@ -325,8 +320,6 @@ static int get_mem_bw_imc(int cpu_no, char *bw_report, float *bw_imc)
imc_counters_config[imc][WRITE].fd = -1;
}
- /* Start all iMC counters to log values (both read and write) */
- reads = 0, writes = 0, of_mul_read = 1, of_mul_write = 1;
for (imc = 0; imc < imcs; imc++) {
ret = open_perf_event(imc, cpu_no, READ);
if (ret)
@@ -334,7 +327,26 @@ static int get_mem_bw_imc(int cpu_no, char *bw_report, float *bw_imc)
ret = open_perf_event(imc, cpu_no, WRITE);
if (ret)
goto close_fds;
+ }
+
+ return 0;
+
+close_fds:
+ perf_close_imc_mem_bw();
+ return -1;
+}
+/*
+ * do_mem_bw_test - Perform memory bandwidth test
+ *
+ * Runs memory bandwidth test over one second period. Also, handles starting
+ * and stopping of the IMC perf counters around the test.
+ */
+static void do_imc_mem_bw_test(void)
+{
+ int imc;
+
+ for (imc = 0; imc < imcs; imc++) {
membw_ioctl_perf_event_ioc_reset_enable(imc, READ);
membw_ioctl_perf_event_ioc_reset_enable(imc, WRITE);
}
@@ -346,6 +358,24 @@ static int get_mem_bw_imc(int cpu_no, char *bw_report, float *bw_imc)
membw_ioctl_perf_event_ioc_disable(imc, READ);
membw_ioctl_perf_event_ioc_disable(imc, WRITE);
}
+}
+
+/*
+ * get_mem_bw_imc - Memory band width as reported by iMC counters
+ * @bw_report: Bandwidth report type (reads, writes)
+ *
+ * Memory B/W utilized by a process on a socket can be calculated using
+ * iMC counters. Perf events are used to read these counters.
+ *
+ * Return: = 0 on success. < 0 on failure.
+ */
+static int get_mem_bw_imc(char *bw_report, float *bw_imc)
+{
+ float reads, writes, of_mul_read, of_mul_write;
+ int imc;
+
+ /* Start all iMC counters to log values (both read and write) */
+ reads = 0, writes = 0, of_mul_read = 1, of_mul_write = 1;
/*
* Get results which are stored in struct type imc_counter_config
@@ -462,24 +492,23 @@ static void initialize_mem_bw_resctrl(const char *ctrlgrp, const char *mongrp,
* 1. If con_mon grp is given, then read from it
* 2. If con_mon grp is not given, then read from root con_mon grp
*/
-static int get_mem_bw_resctrl(unsigned long *mbm_total)
+static FILE *open_mem_bw_resctrl(const char *mbm_bw_file)
{
FILE *fp;
- fp = fopen(mbm_total_path, "r");
- if (!fp) {
+ fp = fopen(mbm_bw_file, "r");
+ if (!fp)
ksft_perror("Failed to open total bw file");
- return -1;
- }
- if (fscanf(fp, "%lu", mbm_total) <= 0) {
- ksft_perror("Could not get mbm local bytes");
- fclose(fp);
+ return fp;
+}
+static int get_mem_bw_resctrl(FILE *fp, unsigned long *mbm_total)
+{
+ if (fscanf(fp, "%lu\n", mbm_total) <= 0) {
+ ksft_perror("Could not get mbm local bytes");
return -1;
}
- fclose(fp);
-
return 0;
}
@@ -616,13 +645,17 @@ static void initialize_llc_occu_resctrl(const char *ctrlgrp, const char *mongrp,
}
static int measure_vals(const struct user_params *uparams,
- struct resctrl_val_param *param,
- unsigned long *bw_resc_start)
+ struct resctrl_val_param *param)
{
- unsigned long bw_resc, bw_resc_end;
+ unsigned long bw_resc, bw_resc_start, bw_resc_end;
+ FILE *mem_bw_fp;
float bw_imc;
int ret;
+ mem_bw_fp = open_mem_bw_resctrl(mbm_total_path);
+ if (!mem_bw_fp)
+ return -1;
+
/*
* Measure memory bandwidth from resctrl and from
* another source which is perf imc value or could
@@ -630,22 +663,35 @@ static int measure_vals(const struct user_params *uparams,
* Compare the two values to validate resctrl value.
* It takes 1sec to measure the data.
*/
- ret = get_mem_bw_imc(uparams->cpu, param->bw_report, &bw_imc);
+ ret = perf_open_imc_mem_bw(uparams->cpu);
if (ret < 0)
- return ret;
+ goto close_fp;
- ret = get_mem_bw_resctrl(&bw_resc_end);
+ ret = get_mem_bw_resctrl(mem_bw_fp, &bw_resc_start);
if (ret < 0)
- return ret;
+ goto close_fp;
- bw_resc = (bw_resc_end - *bw_resc_start) / MB;
- ret = print_results_bw(param->filename, bm_pid, bw_imc, bw_resc);
- if (ret)
- return ret;
+ rewind(mem_bw_fp);
- *bw_resc_start = bw_resc_end;
+ do_imc_mem_bw_test();
- return 0;
+ ret = get_mem_bw_resctrl(mem_bw_fp, &bw_resc_end);
+ if (ret < 0)
+ goto close_fp;
+
+ ret = get_mem_bw_imc(param->bw_report, &bw_imc);
+ if (ret < 0)
+ goto close_fp;
+
+ fclose(mem_bw_fp);
+
+ bw_resc = (bw_resc_end - bw_resc_start) / MB;
+
+ return print_results_bw(param->filename, bm_pid, bw_imc, bw_resc);
+
+close_fp:
+ fclose(mem_bw_fp);
+ return ret;
}
/*
@@ -719,7 +765,6 @@ int resctrl_val(const struct resctrl_test *test,
struct resctrl_val_param *param)
{
char *resctrl_val = param->resctrl_val;
- unsigned long bw_resc_start = 0;
struct sigaction sigact;
int ret = 0, pipefd[2];
char pipe_message = 0;
@@ -861,7 +906,7 @@ int resctrl_val(const struct resctrl_test *test,
if (!strncmp(resctrl_val, MBM_STR, sizeof(MBM_STR)) ||
!strncmp(resctrl_val, MBA_STR, sizeof(MBA_STR))) {
- ret = measure_vals(uparams, param, &bw_resc_start);
+ ret = measure_vals(uparams, param);
if (ret)
break;
} else if (!strncmp(resctrl_val, CMT_STR, sizeof(CMT_STR))) {
For MBM/MBA tests, measure_vals() calls get_mem_bw_imc() that performs the measurement over a duration of sleep(1) call. The memory bandwidth numbers from IMC are derived over this duration. The resctrl FS derived memory bandwidth, however, is calculated inside measure_vals() and only takes delta between the previous value and the current one which besides the actual test, also samples inter-test noise. Rework the logic in measure_vals() and get_mem_bw_imc() such that the resctrl FS memory bandwidth section covers much shorter duration closely matching that of the IMC perf counters to improve measurement accuracy. For the second read after rewind() to return a fresh value, also newline has to be consumed by the fscanf(). Suggested-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> --- v5: - Open mem bw file once and use rewind() - Read \n from the mem bw file to allow rewind to return a new value. v4: - Open resctrl mem bw file (twice) beforehand to avoid opening it during the test v3: - Don't drop Return: entry from perf_open_imc_mem_bw() func comment --- tools/testing/selftests/resctrl/resctrl_val.c | 115 ++++++++++++------ 1 file changed, 80 insertions(+), 35 deletions(-)