mbox series

[v4,0/7] LMU Rework

Message ID 20190506191614.25051-1-dmurphy@ti.com
Headers show
Series LMU Rework | expand

Message

Dan Murphy May 6, 2019, 7:16 p.m. UTC 
Hello

With this series there was an offline discussion that the filename of the LED
portion of the driver did not adhere to the directory file naming convention so
the file name has been changed

ti-lmu-led-common.c->leds-ti-lmu-common.c
ti-lmu-led-common.h->leds-ti-lmu-common.h

Dan

Dan Murphy (7):
  dt-bindings: mfd: LMU: Fix lm3632 dt binding example
  dt-bindings: mfd: LMU: Add the ramp up/down property
  dt-bindings: mfd: LMU: Add ti,brightness-resolution
  leds: TI LMU: Add common code for TI LMU devices
  dt-bindings: ti-lmu: Modify dt bindings for the LM3697
  mfd: ti-lmu: Remove support for LM3697
  leds: lm3697: Introduce the lm3697 driver

 .../devicetree/bindings/leds/leds-lm3697.txt  |  73 ++++
 .../devicetree/bindings/mfd/ti-lmu.txt        |  58 ++-
 drivers/leds/Kconfig                          |  15 +
 drivers/leds/Makefile                         |   2 +
 drivers/leds/leds-lm3697.c                    | 395 ++++++++++++++++++
 drivers/leds/leds-ti-lmu-common.c             | 156 +++++++
 drivers/mfd/Kconfig                           |   2 +-
 drivers/mfd/ti-lmu.c                          |  17 -
 include/linux/leds-ti-lmu-common.h            |  47 +++
 include/linux/mfd/ti-lmu-register.h           |  44 --
 include/linux/mfd/ti-lmu.h                    |   1 -
 11 files changed, 714 insertions(+), 96 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/leds/leds-lm3697.txt
 create mode 100644 drivers/leds/leds-lm3697.c
 create mode 100644 drivers/leds/leds-ti-lmu-common.c
 create mode 100644 include/linux/leds-ti-lmu-common.h

-- 
2.21.0.5.gaeb582a983

Comments

Lee Jones May 8, 2019, 11:35 a.m. UTC | #1 
On Mon, 06 May 2019, Dan Murphy wrote:

> Fix the lm3632 dt binding examples as the LCM enable GPIOs

> are defined as enable GPIOs per the regulator/lm363x-regulator.txt

> bindings document.

> 

> Reviewed-by: Rob Herring <robh@kernel.org>

> Signed-off-by: Dan Murphy <dmurphy@ti.com>


For my own reference:
  Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
Lee Jones May 8, 2019, 11:36 a.m. UTC | #2 
On Mon, 06 May 2019, Dan Murphy wrote:

> Add ti,brightness-resolution to the TI LMU binding to define

> whether the device uses 8-bit brightness or 11-bit brightness.

> 

> Reviewed-by: Rob Herring <robh@kernel.org>

> Signed-off-by: Dan Murphy <dmurphy@ti.com>


For my own reference:
  Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog