| Message ID | 20240122-ktd2801-v4-0-33c986a3eb68@skole.hr |
|---|---|
| Headers | show |
| Series | Kinetic ExpressWire library and KTD2801 backlight driver | expand |
On Mon, Jan 22, 2024 at 08:50:58PM +0100, Duje Mihanović wrote: > KTD2801 is a LED backlight driver IC found in samsung,coreprimevelte. > The brightness can be set using PWM or the ExpressWire protocol. Add > a DT binding for the KTD2801. > > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > Reviewed-by: Linus Walleij <linus.walleij@linaro.org> > Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Daniel.
Hello, This series adds support for the Kinetic KTD2801 LED backlight driver IC found in samsung,coreprimevelte. Support is already upstream for the somewhat similar KTD2692 flash driver, and this series since v3 also moves its ExpressWire code into a separate library and converts the KTD2692 driver to use that library. Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr> --- Changes in v4: - Drop 'extern' keywords in leds-expresswire.h - Add 'expresswire_write_u8' to leds-expresswire.c and use it in the two drivers - Move GPIOLIB dependency to LEDS_EXPRESSWIRE instead of letting clients handle it - Drop time constant macros - Drop delay.h include in ktd2692 - Drop bits.h and delay.h includes in ktd2801 - Link to v3: https://lore.kernel.org/r/20240120-ktd2801-v3-0-fe2cbafffb21@skole.hr Changes in v3: - Split ExpressWire code into library (and convert KTD2692 to use this library) - Rewrite commit messages - Add link to datasheet - Drop of.h include in ktd2801 - Use _cansleep and usleep_range when powering off - Clean up bitwise operation in update_status - Link to v2: https://lore.kernel.org/r/20240118-ktd2801-v2-0-425cf32e0769@skole.hr Changes in v2: - Address maintainer comments: - Drop MODULE_ALIAS - Rename enable-gpios to ctrl-gpios - Rename ktd2801_backlight->desc to ktd2801_backlight->gpiod - Give time constants more descriptive names and note their origins in Samsung driver - Convert to GPIO_ACTIVE_HIGH - Update trailers - Link to v1: https://lore.kernel.org/r/20231005-ktd2801-v1-0-43cd85b0629a@skole.hr --- Duje Mihanović (3): leds: ktd2692: move ExpressWire code to library dt-bindings: backlight: add Kinetic KTD2801 binding backlight: Add Kinetic KTD2801 backlight support .../bindings/leds/backlight/kinetic,ktd2801.yaml | 46 ++++++++ MAINTAINERS | 13 +++ drivers/leds/Kconfig | 4 + drivers/leds/Makefile | 3 + drivers/leds/flash/Kconfig | 2 +- drivers/leds/flash/leds-ktd2692.c | 116 +++++-------------- drivers/leds/leds-expresswire.c | 68 +++++++++++ drivers/video/backlight/Kconfig | 7 ++ drivers/video/backlight/Makefile | 1 + drivers/video/backlight/ktd2801-backlight.c | 128 +++++++++++++++++++++ include/linux/leds-expresswire.h | 36 ++++++ 11 files changed, 334 insertions(+), 90 deletions(-) --- base-commit: 0dd3ee31125508cd67f7e7172247f05b7fd1753a change-id: 20231004-ktd2801-0f3883cb59d0 Best regards,