From patchwork Fri Sep 29 00:38:59 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Anjelique Melendez X-Patchwork-Id: 728312 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 3D3C8E743D3 for ; Fri, 29 Sep 2023 00:39:48 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232537AbjI2Ajr (ORCPT ); Thu, 28 Sep 2023 20:39:47 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:33378 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229799AbjI2Ajp (ORCPT ); Thu, 28 Sep 2023 20:39:45 -0400 Received: from mx0b-0031df01.pphosted.com (mx0b-0031df01.pphosted.com [205.220.180.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 1320F1A1; Thu, 28 Sep 2023 17:39:42 -0700 (PDT) Received: from pps.filterd (m0279873.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 38T0FRLg017690; Fri, 29 Sep 2023 00:39:33 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-transfer-encoding : content-type; s=qcppdkim1; bh=R67bAOBo6mh67TDuYXmIz7oxh7KAgh6pMeijRDLC+Vw=; b=YkI+lkEcTXxuv9mTYEczucIqW6GDDxlJvTDX0SkZ7Y+9wVjryYXaDEM5laXjsXJyEOLy 3kyp5fEHDJLbqtLAgmpkvRfbGoGyYfUp9rgSWQswHBdb2vR5T4cwrqU4xhO/Z/c+q+v1 H80H0Iyf/dKMwsI2rB7EHlFLkLYg3Ay+GQwjB5h1QvCLxaRWoI961nAhBTwirxSFUy6w u8ZyMLeaf0dmOeTRhzQz44BmlaW2H2JrNSYe6JCdemfBKmrPnXGF4gurrMbP4hVd9342 mkmzNYnVhXQWSklioVPn5upzj49Ki8PgrhMC6n65Y6PkpEXy4b1xmLQBfUlwgUFaeI9A KQ== Received: from nalasppmta03.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3td24ua9wq-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Fri, 29 Sep 2023 00:39:33 +0000 Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA03.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 38T0dW60029588 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Fri, 29 Sep 2023 00:39:32 GMT Received: from hu-amelende-lv.qualcomm.com (10.49.16.6) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1118.36; Thu, 28 Sep 2023 17:39:29 -0700 From: Anjelique Melendez To: , , , , , , , CC: , , , , , , , , , , , Anjelique Melendez Subject: [PATCH v5 6/7] leds: rgb: leds-qcom-lpg: Include support for PPG with dedicated LUT SDAM Date: Thu, 28 Sep 2023 17:38:59 -0700 Message-ID: <20230929003901.15086-7-quic_amelende@quicinc.com> X-Mailer: git-send-email 2.41.0 In-Reply-To: <20230929003901.15086-1-quic_amelende@quicinc.com> References: <20230929003901.15086-1-quic_amelende@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.49.16.6] X-ClientProxiedBy: nalasex01b.na.qualcomm.com (10.47.209.197) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: -ESc67DequERn5Sbhspo4nMYsGEJzyfN X-Proofpoint-ORIG-GUID: -ESc67DequERn5Sbhspo4nMYsGEJzyfN X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.267,Aquarius:18.0.980,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-09-28_23,2023-09-28_03,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 clxscore=1015 malwarescore=0 suspectscore=0 impostorscore=0 lowpriorityscore=0 spamscore=0 priorityscore=1501 mlxscore=0 mlxlogscore=999 adultscore=0 bulkscore=0 phishscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2309180000 definitions=main-2309290002 Precedence: bulk List-ID: X-Mailing-List: linux-leds@vger.kernel.org On PMICs such as PM8350C, the pattern lookup table (LUT) is stored in a separate SDAM from the one where the lpg per-channel data is stored. Add support for PPG with a dedicated LUT SDAM while maintaining backward compatibility for those targets that use only a single SDAM. Co-developed-by: Guru Das Srinagesh Signed-off-by: Guru Das Srinagesh Signed-off-by: Anjelique Melendez Reviewed-by: Lee Jones --- drivers/leds/rgb/leds-qcom-lpg.c | 95 ++++++++++++++++++++++++++------ 1 file changed, 78 insertions(+), 17 deletions(-) diff --git a/drivers/leds/rgb/leds-qcom-lpg.c b/drivers/leds/rgb/leds-qcom-lpg.c index a6cea6bd7167..910c7cf740cc 100644 --- a/drivers/leds/rgb/leds-qcom-lpg.c +++ b/drivers/leds/rgb/leds-qcom-lpg.c @@ -42,6 +42,8 @@ #define PWM_DTEST_REG(x) (0xe2 + (x) - 1) #define SDAM_REG_PBS_SEQ_EN 0x42 +#define SDAM_PBS_TRIG_SET 0xe5 +#define SDAM_PBS_TRIG_CLR 0xe6 #define TRI_LED_SRC_SEL 0x45 #define TRI_LED_EN_CTL 0x46 @@ -61,7 +63,10 @@ #define RAMP_STEP_DURATION(x) (((x) * 1000 / DEFAULT_TICK_DURATION_US) & 0xff) /* LPG common config settings for PPG */ +#define SDAM_START_BASE 0x40 #define SDAM_REG_RAMP_STEP_DURATION 0x47 + +#define SDAM_LUT_SDAM_LUT_PATTERN_OFFSET 0x45 #define SDAM_LPG_SDAM_LUT_PATTERN_OFFSET 0x80 /* LPG per channel config settings for PPG */ @@ -70,6 +75,8 @@ #define SDAM_END_INDEX_OFFSET 0x3 #define SDAM_START_INDEX_OFFSET 0x4 #define SDAM_PBS_SCRATCH_LUT_COUNTER_OFFSET 0x6 +#define SDAM_PAUSE_HI_MULTIPLIER_OFFSET 0x8 +#define SDAM_PAUSE_LO_MULTIPLIER_OFFSET 0x9 struct lpg_channel; struct lpg_data; @@ -86,6 +93,7 @@ struct lpg_data; * @lut_bitmap: allocation bitmap for LUT entries * @pbs_dev: PBS device * @lpg_chan_sdam: LPG SDAM peripheral device + * @lut_sdam: LUT SDAM peripheral device * @pbs_en_bitmap: bitmap for tracking PBS triggers * @triled_base: base address of the TRILED block (optional) * @triled_src: power-source for the TRILED @@ -110,6 +118,7 @@ struct lpg { struct pbs_dev *pbs_dev; struct nvmem_device *lpg_chan_sdam; + struct nvmem_device *lut_sdam; unsigned long pbs_en_bitmap; u32 triled_base; @@ -253,6 +262,13 @@ static int lpg_clear_pbs_trigger(struct lpg_channel *chan) rc = nvmem_device_write(chan->lpg->lpg_chan_sdam, SDAM_REG_PBS_SEQ_EN, 1, &val); if (rc < 0) return rc; + + if (chan->lpg->lut_sdam) { + val = PBS_SW_TRIG_BIT; + rc = nvmem_device_write(chan->lpg->lpg_chan_sdam, SDAM_PBS_TRIG_CLR, 1, &val); + if (rc < 0) + return rc; + } } return 0; @@ -268,9 +284,15 @@ static int lpg_set_pbs_trigger(struct lpg_channel *chan) if (rc < 0) return rc; - rc = qcom_pbs_trigger_event(chan->lpg->pbs_dev, val); - if (rc < 0) - return rc; + if (chan->lpg->lut_sdam) { + rc = nvmem_device_write(chan->lpg->lpg_chan_sdam, SDAM_PBS_TRIG_SET, 1, &val); + if (rc < 0) + return rc; + } else { + rc = qcom_pbs_trigger_event(chan->lpg->pbs_dev, val); + if (rc < 0) + return rc; + } } set_bit(chan->lpg_idx, &chan->lpg->pbs_en_bitmap); @@ -341,8 +363,15 @@ static int lpg_lut_store_sdam(struct lpg *lpg, struct led_pattern *pattern, for (i = 0; i < len; i++) { brightness = pattern[i].brightness; - addr = SDAM_LPG_SDAM_LUT_PATTERN_OFFSET + i + idx; - rc = nvmem_device_write(lpg->lpg_chan_sdam, addr, 1, &brightness); + + if (lpg->lut_sdam) { + addr = SDAM_LUT_SDAM_LUT_PATTERN_OFFSET + i + idx; + rc = nvmem_device_write(lpg->lut_sdam, addr, 1, &brightness); + } else { + addr = SDAM_LPG_SDAM_LUT_PATTERN_OFFSET + i + idx; + rc = nvmem_device_write(lpg->lpg_chan_sdam, addr, 1, &brightness); + } + if (rc < 0) return rc; } @@ -606,13 +635,28 @@ static void lpg_sdam_apply_lut_control(struct lpg_channel *chan) struct nvmem_device *lpg_chan_sdam = chan->lpg->lpg_chan_sdam; unsigned int lo_idx = chan->pattern_lo_idx; unsigned int hi_idx = chan->pattern_hi_idx; - u8 val = 0, conf = 0; + u8 val = 0, conf = 0, lut_offset = 0; + unsigned int hi_pause, lo_pause; + struct lpg *lpg = chan->lpg; if (!chan->ramp_enabled || chan->pattern_lo_idx == chan->pattern_hi_idx) return; + hi_pause = DIV_ROUND_UP(chan->ramp_hi_pause_ms, chan->ramp_tick_ms); + lo_pause = DIV_ROUND_UP(chan->ramp_lo_pause_ms, chan->ramp_tick_ms); + if (!chan->ramp_oneshot) conf |= LPG_PATTERN_CONFIG_REPEAT; + if (chan->ramp_hi_pause_ms && lpg->lut_sdam) + conf |= LPG_PATTERN_CONFIG_PAUSE_HI; + if (chan->ramp_lo_pause_ms && lpg->lut_sdam) + conf |= LPG_PATTERN_CONFIG_PAUSE_LO; + + if (lpg->lut_sdam) { + lut_offset = SDAM_LUT_SDAM_LUT_PATTERN_OFFSET - SDAM_START_BASE; + hi_idx += lut_offset; + lo_idx += lut_offset; + } nvmem_device_write(lpg_chan_sdam, SDAM_PBS_SCRATCH_LUT_COUNTER_OFFSET + chan->sdam_offset, 1, &val); nvmem_device_write(lpg_chan_sdam, SDAM_PATTERN_CONFIG_OFFSET + chan->sdam_offset, 1, &conf); @@ -621,6 +665,12 @@ static void lpg_sdam_apply_lut_control(struct lpg_channel *chan) val = RAMP_STEP_DURATION(chan->ramp_tick_ms); nvmem_device_write(lpg_chan_sdam, SDAM_REG_RAMP_STEP_DURATION, 1, &val); + + if (lpg->lut_sdam || lpg->lut_base) { + nvmem_device_write(lpg_chan_sdam, SDAM_PAUSE_HI_MULTIPLIER_OFFSET + chan->sdam_offset, 1, &hi_pause); + nvmem_device_write(lpg_chan_sdam, SDAM_PAUSE_LO_MULTIPLIER_OFFSET + chan->sdam_offset, 1, &lo_pause); + } + } static void lpg_apply_lut_control(struct lpg_channel *chan) @@ -1004,8 +1054,8 @@ static int lpg_pattern_set(struct lpg_led *led, struct led_pattern *led_pattern, * enabled. In this scenario the delta_t of the middle entry (i.e. the * last in the programmed pattern) determines the "high pause". * - * SDAM devices supporting LUT do not support "low pause", "high pause" - * or "ping pong" + * SDAM-based devices do not support "ping pong", and only supports + * "low pause" and "high pause" with a dedicated SDAM LUT. */ /* Detect palindromes and use "ping pong" to reduce LUT usage */ @@ -1050,9 +1100,9 @@ static int lpg_pattern_set(struct lpg_led *led, struct led_pattern *led_pattern, /* * Find "low pause" and "high pause" in the pattern in the LUT case. - * LPGs using SDAM for pattern require equal duration of all steps + * PPG LPGs without LUT SDAM require equal duration of all steps. */ - if (lpg->lut_base) { + if (lpg->lut_base || lpg->lut_sdam) { lo_pause = pattern[0].delta_t; hi_pause = pattern[actual_len - 1].delta_t; } else { @@ -1517,17 +1567,28 @@ static int lpg_init_sdam(struct lpg *lpg) sdam_count = of_property_count_strings(lpg->dev->of_node, "nvmem-names"); if (sdam_count <= 0) return 0; + if (sdam_count > 2) + return -EINVAL; - /* get the SDAM device for LPG/LUT config */ + /* get the 1st nvmem device for LPG/LUT config */ lpg->lpg_chan_sdam = devm_nvmem_device_get(lpg->dev, "lpg_chan_sdam"); if (IS_ERR(lpg->lpg_chan_sdam)) return dev_err_probe(lpg->dev, PTR_ERR(lpg->lpg_chan_sdam), - "Failed to get lpg sdam device\n"); - - lpg->pbs_dev = get_pbs_client_device(lpg->dev); - if (IS_ERR(lpg->pbs_dev)) - return dev_err_probe(lpg->dev, PTR_ERR(lpg->pbs_dev), - "Failed to get PBS client device\n"); + "Failed to get lpg_chan_sdam device\n"); + + if (sdam_count == 1) { + /* get PBS device node if single SDAM device */ + lpg->pbs_dev = get_pbs_client_device(lpg->dev); + if (IS_ERR(lpg->pbs_dev)) + return dev_err_probe(lpg->dev, PTR_ERR(lpg->pbs_dev), + "Failed to get PBS client device\n"); + } else if (sdam_count == 2) { + /* get the 2nd SDAM device for LUT pattern */ + lpg->lut_sdam = devm_nvmem_device_get(lpg->dev, "lut_sdam"); + if (IS_ERR(lpg->lut_sdam)) + return dev_err_probe(lpg->dev, PTR_ERR(lpg->lut_sdam), + "Failed to get lut_sdam device\n"); + } for (i = 0; i < lpg->num_channels; i++) { chan = &lpg->channels[i];