From patchwork Wed Dec 11 16:27:17 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Thomas Richard X-Patchwork-Id: 850633 Received: from relay1-d.mail.gandi.net (relay1-d.mail.gandi.net [217.70.183.193]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 492811DCB09; Wed, 11 Dec 2024 16:27:58 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=217.70.183.193 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1733934482; cv=none; b=HKjMxyQ8ag8+rtSXW5s6Dt8l+R/093MSfxq/SzozC3WQIvCm5aS/eFdXKcdSWjrCMPOMhy2XOn/17V43LTQ1cWcb5vlBECRF4EjST77537TRYgr4+dYVTGVrI73pKOP2hTP1C0fv1JbKTxVx6PWIw3Sa9Nd9aei3aH89OaIpKes= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1733934482; c=relaxed/simple; bh=A72m0aIUimExktaT990umlPxE578madL+BQI1rpCTdk=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=sJVyvwLLE09S2AdSruQUFcl+2BI8zXCHe4Upzg5XxXu/FvMQdyjyDIhsZ2iefm9ySMFvxSElj3v2EFNYb1jxCUIXyyDmy+9PDpET6TBO2+nUAN5c/iufAXsg2epgv/wjUXKYdOJXMB7rUFSJokgq1f6qdD9my1D2hENM1ubyU1Q= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com; spf=pass smtp.mailfrom=bootlin.com; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b=kaAV0jIe; arc=none smtp.client-ip=217.70.183.193 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=bootlin.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b="kaAV0jIe" Received: by mail.gandi.net (Postfix) with ESMTPSA id 8650C24000D; Wed, 11 Dec 2024 16:27:51 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1733934472; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version:content-type:content-type: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=ZQayVAe1OKxHfTylerB8TQVBruMZzFhLn/t/stczNho=; b=kaAV0jIeXmltH5Iy+ZBRkyzAcTGDb2+z5aAzX/Xgmj7amkdiym+9dJDhjaMOSQKHPcUZA8 5jJri6Gu6/+0tX+S5Of22E9vX+vLCTI1OYq8Nzj0CYP5DzQj0rxlEifvrfClCWUbMcXxkk l2ZRb4VEq/BcTw26HN2wXhiQEHbIT5FMl8PuSXejg03Bb080T/3Y1U0K/9qhIYOMPRFdbc FMCCeC3ct8t5kwRxDr8sLZie4Ajul8TRahjUtX9T+HB21aX1i80I8EgGdOr57LHIxgPriM 6Dd2mSrTigMONqtBn9uO1Tb2jVUcFqk4/dQ2B175LZMQoN+zkzIIPpuD21mp7Q== From: Thomas Richard Date: Wed, 11 Dec 2024 17:27:17 +0100 Subject: [PATCH 2/5] leds: Add AAEON UP board LED driver Precedence: bulk X-Mailing-List: linux-leds@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20241211-aaeon-up-board-pinctrl-support-v1-2-24719be27631@bootlin.com> References: <20241211-aaeon-up-board-pinctrl-support-v1-0-24719be27631@bootlin.com> In-Reply-To: <20241211-aaeon-up-board-pinctrl-support-v1-0-24719be27631@bootlin.com> To: Linus Walleij , Bartosz Golaszewski , Lee Jones , Pavel Machek Cc: linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org, linux-leds@vger.kernel.org, thomas.petazzoni@bootlin.com, DanieleCleri@aaeon.eu, GaryWang@aaeon.com.tw, Thomas Richard X-Mailer: b4 0.14.1 X-GND-Sasl: thomas.richard@bootlin.com Add support for LEDs on AAEON UP boards. These leds are managed by the onboard FPGA: - UP boards: yellow, green, red - UP Squared boards: blue, yellow, green, red Based on the work done by Gary Wang , largely rewritten. Signed-off-by: Thomas Richard --- drivers/leds/Kconfig | 9 ++++ drivers/leds/Makefile | 1 + drivers/leds/leds-upboard.c | 126 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 136 insertions(+) diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index b784bb74a837..984ef5cfa9fa 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -815,6 +815,15 @@ config LEDS_SC27XX_BLTC This driver can also be built as a module. If so the module will be called leds-sc27xx-bltc. +config LEDS_UPBOARD + tristate "LED support for the UP board" + depends on LEDS_CLASS && MFD_UPBOARD_FPGA + help + This option enables support for the UP board LEDs. + + This driver can also be built as a module. If so the module will be + called leds-upboard. + comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)" config LEDS_BLINKM diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 18afbb5a23ee..e7982938ddc1 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -89,6 +89,7 @@ obj-$(CONFIG_LEDS_TI_LMU_COMMON) += leds-ti-lmu-common.o obj-$(CONFIG_LEDS_TLC591XX) += leds-tlc591xx.o obj-$(CONFIG_LEDS_TPS6105X) += leds-tps6105x.o obj-$(CONFIG_LEDS_TURRIS_OMNIA) += leds-turris-omnia.o +obj-$(CONFIG_LEDS_UPBOARD) += leds-upboard.o obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o diff --git a/drivers/leds/leds-upboard.c b/drivers/leds/leds-upboard.c new file mode 100644 index 000000000000..b350eb294280 --- /dev/null +++ b/drivers/leds/leds-upboard.c @@ -0,0 +1,126 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * UP board LED driver. + * + * Copyright (c) AAEON. All rights reserved. + * Copyright (C) 2024 Bootlin + * + * Author: Gary Wang + * Author: Thomas Richard + */ + +#include +#include +#include +#include +#include +#include +#include + +#define led_cdev_to_led_upboard(c) container_of(c, struct upboard_led, cdev) + +struct upboard_led { + struct regmap_field *field; + struct led_classdev cdev; +}; + +struct upboard_led_profile { + const char *name; + unsigned int bit; +}; + +static struct upboard_led_profile upboard_up_led_profile[] = { + { "upboard:yellow:" LED_FUNCTION_STATUS, 0 }, + { "upboard:green:" LED_FUNCTION_STATUS, 1 }, + { "upboard:red:" LED_FUNCTION_STATUS, 2 }, +}; + +static struct upboard_led_profile upboard_up2_led_profile[] = { + { "upboard:blue:" LED_FUNCTION_STATUS, 0 }, + { "upboard:yellow:" LED_FUNCTION_STATUS, 1 }, + { "upboard:green:" LED_FUNCTION_STATUS, 2 }, + { "upboard:red:" LED_FUNCTION_STATUS, 3 }, +}; + +static enum led_brightness upboard_led_brightness_get(struct led_classdev *cdev) +{ + struct upboard_led *led = led_cdev_to_led_upboard(cdev); + int brightness, ret; + + ret = regmap_field_read(led->field, &brightness); + + return ret ? LED_OFF : brightness; +}; + +static int upboard_led_brightness_set(struct led_classdev *cdev, enum led_brightness brightness) +{ + struct upboard_led *led = led_cdev_to_led_upboard(cdev); + + return regmap_field_write(led->field, brightness != LED_OFF); +}; + +static int upboard_led_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct upboard_fpga *fpga = dev_get_drvdata(dev->parent); + struct upboard_led_profile *led_profile; + struct upboard_led *led; + int led_instances, ret, i; + + switch (fpga->fpga_data->type) { + case UPBOARD_UP_FPGA: + led_profile = upboard_up_led_profile; + led_instances = ARRAY_SIZE(upboard_up_led_profile); + break; + case UPBOARD_UP2_FPGA: + led_profile = upboard_up2_led_profile; + led_instances = ARRAY_SIZE(upboard_up2_led_profile); + break; + default: + return dev_err_probe(dev, -EINVAL, "Unknown device type %d\n", + fpga->fpga_data->type); + } + + for (i = 0; i < led_instances; i++) { + const struct reg_field fldconf = { + .reg = UPBOARD_REG_FUNC_EN0, + .lsb = led_profile[i].bit, + .msb = led_profile[i].bit, + }; + + led = devm_kzalloc(dev, sizeof(*led), GFP_KERNEL); + if (!led) + return -ENOMEM; + + led->field = devm_regmap_field_alloc(&pdev->dev, fpga->regmap, fldconf); + if (IS_ERR(led->field)) + return PTR_ERR(led->field); + + led->cdev.brightness_get = upboard_led_brightness_get; + led->cdev.brightness_set_blocking = upboard_led_brightness_set; + led->cdev.max_brightness = LED_ON; + + led->cdev.name = led_profile[i].name; + + ret = devm_led_classdev_register(dev, &led->cdev); + if (ret) + return ret; + } + + return 0; +} + +static struct platform_driver upboard_led_driver = { + .driver = { + .name = "upboard-leds", + }, + .probe = upboard_led_probe, +}; + +module_platform_driver(upboard_led_driver); + +MODULE_AUTHOR("Gary Wang "); +MODULE_AUTHOR("Thomas Richard "); +MODULE_DESCRIPTION("UP Board LED driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:upboard-led");