| Message ID | 20211217015530.23720-1-yunfei.dong@mediatek.com |
|---|---|
| Headers | show |
| Series | Support multi hardware decode using of_platform_populate | expand |
Hi Yunfei, On 17/12/2021 02:55, Yunfei Dong wrote: > This series adds support for multi hardware decode into mtk-vcodec, by first adding use > of_platform_populate to manage each hardware information: interrupt, clock, register > bases and power. Secondly add core work queue to deal with core hardware message, > at the same time, add msg queue for different hardware share messages. Lastly, the > architecture of different specs are not the same, using specs type to separate them. > > This series has been tested with both MT8183 and MT8173. Decoding was working for both chips. > > Patches 1~3 rewrite get register bases and power on/off interface. > Patches 4 export decoder pm interfaces. > Patches 5 add to support 8192. > Patch 6 support multi hardware. > Patch 7 separate video encoder and decoder document > Patch 8-17 add interfaces to support core hardware. > Patch 18-19 remove mtk_vcodec_release_dec/enc_pm interfaces. I'm getting quite a few warnings from scripts/checkpatch.pl --strict when I run that over the patches. Please fix the reported issues where it makes sense to do so. I'm also getting a sparse warning: drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.c:22:27: warning: symbol 'mtk_vdec_hw_match' was not declared. Should it be static? And a smatch warning: drivers/media/platform/mtk-vcodec/vdec_msg_queue.c:273 vdec_msg_queue_init() warn: missing error code 'err' There are also a few kerneldoc errors/warnings: drivers/media/platform/mtk-vcodec/vdec_msg_queue.h:38: warning: Function parameter or member 'ready_to_use' not described in 'vdec_msg_queue_ctx' drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h:108: error: Cannot parse struct or union! drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h:118: error: Cannot parse struct or union! drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h:351: error: Cannot parse struct or union! drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.h:27: warning: Enum value 'VDEC_HW_SYS' not described in enum 'mtk_vdec_hw_reg_idx' drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.h:27: warning: Enum value 'VDEC_HW_MISC' not described in enum 'mtk_vdec_hw_reg_idx' drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.h:27: warning: Enum value 'VDEC_HW_MAX' not described in enum 'mtk_vdec_hw_reg_idx' Other than these issues this series looks about ready to be merged. Let me know when you post v18 whether it is indeed ready to be merged or if you need more reviews from people. Regards, Hans PS: I had to delete a bunch of CCs. For some reason my smtp server had problems with it. Sorry about that. > --- > changes compared with v16: > - fix build warning for patch 13. > > changes compared with v15: > - add Reviewed-by for patch 10. > > changes compared with v14: > - rebase to latest media stage. > > changes compared with v13: > - change some function position in case of ko dependency for patch 15. > - add reviewed-by for patch 06/13/15. > > changes compared with v12: > - fix comments from rob for patch 15. > - fix comments from steve for 06 and 13. > > changes compared with v11: > - fix comments from AngeloGioacchino for patch 09~11/19. > - fix comments from steve for patch 03/19. > > changes compared with v10: > - fix comments from tzung-bi for patch 06/19. > - add more detail information for hardware block diagram 15/19 > > changes compared with v9: > - need not to build ko, just export pm interfaces for patch 04/19. > - fix comments for patch 06/19 > > changes compared with v8: > - add new patch 18~19 to remove mtk_vcodec_release_de/enc_pm interfaces. > - fix spelling mistakes for patch 17/19 > - fix yaml comments for patch 15/19 > > Changes compared with v7: > - add new patch 4 to build decoder pm file as module > - add new patch 5 to support 8192 > - fix comments for patch 6/17 > - change some logic for using work queue instead of create thread for core hardware decode for patch 10/17 > - using work queue for hardware decode instead of create thread for patch 13/17 > - add returen value for patch 14/17 > - fix yaml check fail 15/17 > > Changes compared with v6: > - Use of_platform_populate to manage multi hardware, not component framework for patch 4/15 > - Re-write dtsi document for hardware architecture changed for patch 13/15 -The dtsi will write like below in patch 13/15: > vcodec_dec: vcodec_dec@16000000 { > compatible = "mediatek,mt8192-vcodec-dec"; > #address-cells = <2>; > #size-cells = <2>; > ranges; > reg = <0 0x16000000 0 0x1000>; /* VDEC_SYS */ > mediatek,scp = <&scp>; > iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>; > dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>; > vcodec_lat { > compatible = "mediatek,mtk-vcodec-lat"; > reg = <0 0x16010000 0 0x800>; /* VDEC_MISC */ > reg-name = "reg-misc"; > interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH 0>; > iommus = <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD_EXT>, > <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD2_EXT>, > <&iommu0 M4U_PORT_L5_VDEC_LAT0_AVC_MV_EXT>, > <&iommu0 M4U_PORT_L5_VDEC_LAT0_PRED_RD_EXT>, > <&iommu0 M4U_PORT_L5_VDEC_LAT0_TILE_EXT>, > <&iommu0 M4U_PORT_L5_VDEC_LAT0_WDMA_EXT>, > <&iommu0 M4U_PORT_L5_VDEC_LAT0_RG_CTRL_DMA_EXT>, > <&iommu0 M4U_PORT_L5_VDEC_UFO_ENC_EXT>; > clocks = <&topckgen CLK_TOP_VDEC_SEL>, > <&vdecsys_soc CLK_VDEC_SOC_VDEC>, > <&vdecsys_soc CLK_VDEC_SOC_LAT>, > <&vdecsys_soc CLK_VDEC_SOC_LARB1>, > <&topckgen CLK_TOP_MAINPLL_D4>; > clock-names = "vdec-sel", "vdec-soc-vdec", "vdec-soc-lat", > "vdec-vdec", "vdec-top"; > assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>; > assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4>; > power-domains = <&spm MT8192_POWER_DOMAIN_VDEC>; > }; > > vcodec_core { > compatible = "mediatek,mtk-vcodec-core"; > reg = <0 0x16025000 0 0x1000>; /* VDEC_CORE_MISC */ > reg-names = "reg-misc"; > interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH 0>; > iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>, > <&iommu0 M4U_PORT_L4_VDEC_UFO_EXT>, > <&iommu0 M4U_PORT_L4_VDEC_PP_EXT>, > <&iommu0 M4U_PORT_L4_VDEC_PRED_RD_EXT>, > <&iommu0 M4U_PORT_L4_VDEC_PRED_WR_EXT>, > <&iommu0 M4U_PORT_L4_VDEC_PPWRAP_EXT>, > <&iommu0 M4U_PORT_L4_VDEC_TILE_EXT>, > <&iommu0 M4U_PORT_L4_VDEC_VLD_EXT>, > <&iommu0 M4U_PORT_L4_VDEC_VLD2_EXT>, > <&iommu0 M4U_PORT_L4_VDEC_AVC_MV_EXT>, > <&iommu0 M4U_PORT_L4_VDEC_RG_CTRL_DMA_EXT>; > clocks = <&topckgen CLK_TOP_VDEC_SEL>, > <&vdecsys CLK_VDEC_VDEC>, > <&vdecsys CLK_VDEC_LAT>, > <&vdecsys CLK_VDEC_LARB1>, > <&topckgen CLK_TOP_MAINPLL_D4>; > clock-names = "vdec-sel", "vdec-soc-vdec", "vdec-soc-lat", > "vdec-vdec", "vdec-top"; > assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>; > assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4>; > power-domains = <&spm MT8192_POWER_DOMAIN_VDEC2>; > }; > }; > > Changes compared with v5: > - Add decoder hardware block diagram for patch 13/15 > > Changes compared with v4: > - Fix comments for patch 4/15 > >> + if (dev->is_comp_supported) { > >> + ret = mtk_vcodec_init_master(dev); > >> + if (ret < 0) > >> + goto err_component_match; > >> + } else { > >> + platform_set_drvdata(pdev, dev); > >> + } > Fix platform_set_drvdata. > - Fix build error for patch 9/15 > - Add depend patch in case of error header file for patch 13/15 > > Changes compared with v3: > - Fix return value for patch 1/15 > - Fix comments for patch 4/15 > > Looking up "mediatek,mtk-vcodec-core" to determine if it uses component framwork sounds like... > Add prameter in pdata, for all platform will use compoent after mt8183 > > >> + if (dev->is_comp_supported) { > >> + ret = mtk_vcodec_init_master(dev); > >> + if (ret < 0) > >> + goto err_component_match; > >> + } else { > >> + platform_set_drvdata(pdev, dev); > >> + } > > + Has asked the same question in [1]. Why it removes the > > +platform_set_drvdata() above? mtk_vcodec_init_master() also calls platform_set_drvdata(). > Must call component_master_add_with_match after platform_set_drvdata for component architecture. > - Fix yaml files check fail for patch 5/15 > - Fix yaml file check fail for patch 14/15 > > Changes compared with v1: > - Fix many comments for patch 3/14 > - Remove unnecessary code for patch 4/14 > - Using enum mtk_vdec_hw_count instead of magic numbers for patch 6/14 > - Reconstructed get/put lat buffer for lat and core hardware for patch 7/14 > - Using yaml format to instead of txt file for patch 12/14 > > Yunfei Dong (19): > media: mtk-vcodec: Get numbers of register bases from DT > media: mtk-vcodec: Align vcodec wake up interrupt interface > media: mtk-vcodec: Refactor vcodec pm interface > media: mtk-vcodec: export decoder pm functions > media: mtk-vcodec: Support MT8192 > media: mtk-vcodec: Add to support multi hardware decode > dt-bindings: media: mtk-vcodec: Separate video encoder and decoder > dt-bindings > media: mtk-vcodec: Use pure single core for MT8183 > media: mtk-vcodec: Add irq interface for multi hardware > media: mtk-vcodec: Add msg queue feature for lat and core architecture > media: mtk-vcodec: Generalize power and clock on/off interfaces > media: mtk-vcodec: Add new interface to lock different hardware > media: mtk-vcodec: Add work queue for core hardware decode > media: mtk-vcodec: Support 34bits dma address for vdec > dt-bindings: media: mtk-vcodec: Adds decoder dt-bindings for mt8192 > media: mtk-vcodec: Add core dec and dec end ipi msg > media: mtk-vcodec: Use codec type to separate different hardware > media: mtk-vcodec: Remove mtk_vcodec_release_dec_pm > media: mtk-vcodec: Remove mtk_vcodec_release_enc_pm > > .../media/mediatek,vcodec-decoder.yaml | 176 +++++++++++ > .../media/mediatek,vcodec-encoder.yaml | 187 ++++++++++++ > .../media/mediatek,vcodec-subdev-decoder.yaml | 265 ++++++++++++++++ > .../bindings/media/mediatek-vcodec.txt | 131 -------- > drivers/media/platform/mtk-vcodec/Makefile | 6 +- > .../platform/mtk-vcodec/mtk_vcodec_dec.c | 4 +- > .../platform/mtk-vcodec/mtk_vcodec_dec.h | 1 + > .../platform/mtk-vcodec/mtk_vcodec_dec_drv.c | 177 ++++++++--- > .../platform/mtk-vcodec/mtk_vcodec_dec_hw.c | 201 ++++++++++++ > .../platform/mtk-vcodec/mtk_vcodec_dec_hw.h | 53 ++++ > .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c | 104 +++++-- > .../platform/mtk-vcodec/mtk_vcodec_dec_pm.h | 12 +- > .../mtk-vcodec/mtk_vcodec_dec_stateful.c | 2 + > .../mtk-vcodec/mtk_vcodec_dec_stateless.c | 21 ++ > .../platform/mtk-vcodec/mtk_vcodec_drv.h | 73 ++++- > .../platform/mtk-vcodec/mtk_vcodec_enc_drv.c | 21 +- > .../platform/mtk-vcodec/mtk_vcodec_enc_pm.c | 10 +- > .../platform/mtk-vcodec/mtk_vcodec_enc_pm.h | 3 +- > .../platform/mtk-vcodec/mtk_vcodec_intr.c | 27 +- > .../platform/mtk-vcodec/mtk_vcodec_intr.h | 4 +- > .../platform/mtk-vcodec/mtk_vcodec_util.c | 59 +++- > .../platform/mtk-vcodec/mtk_vcodec_util.h | 8 +- > .../platform/mtk-vcodec/vdec/vdec_h264_if.c | 2 +- > .../mtk-vcodec/vdec/vdec_h264_req_if.c | 2 +- > .../platform/mtk-vcodec/vdec/vdec_vp8_if.c | 2 +- > .../platform/mtk-vcodec/vdec/vdec_vp9_if.c | 2 +- > .../media/platform/mtk-vcodec/vdec_drv_if.c | 21 +- > .../media/platform/mtk-vcodec/vdec_ipi_msg.h | 16 +- > .../platform/mtk-vcodec/vdec_msg_queue.c | 289 ++++++++++++++++++ > .../platform/mtk-vcodec/vdec_msg_queue.h | 143 +++++++++ > .../media/platform/mtk-vcodec/vdec_vpu_if.c | 46 ++- > .../media/platform/mtk-vcodec/vdec_vpu_if.h | 22 ++ > .../platform/mtk-vcodec/venc/venc_h264_if.c | 2 +- > .../platform/mtk-vcodec/venc/venc_vp8_if.c | 2 +- > 34 files changed, 1800 insertions(+), 294 deletions(-) > create mode 100644 Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml > create mode 100644 Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml > create mode 100644 Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml > delete mode 100644 Documentation/devicetree/bindings/media/mediatek-vcodec.txt > create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.c > create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.h > create mode 100644 drivers/media/platform/mtk-vcodec/vdec_msg_queue.c > create mode 100644 drivers/media/platform/mtk-vcodec/vdec_msg_queue.h >
Hi Hans, Thanks for your suggestion. I already send v18 to review. Could you please help to review again? Best Regards, Yunfei Dong On Tue, 2022-01-11 at 12:54 +0100, Hans Verkuil wrote: > Hi Yunfei, > > On 17/12/2021 02:55, Yunfei Dong wrote: > > This series adds support for multi hardware decode into mtk-vcodec, > > by first adding use > > of_platform_populate to manage each hardware information: > > interrupt, clock, register > > bases and power. Secondly add core work queue to deal with core > > hardware message, > > at the same time, add msg queue for different hardware share > > messages. Lastly, the > > architecture of different specs are not the same, using specs type > > to separate them. > > > > This series has been tested with both MT8183 and MT8173. Decoding > > was working for both chips. > > > > Patches 1~3 rewrite get register bases and power on/off interface. > > Patches 4 export decoder pm interfaces. > > Patches 5 add to support 8192. > > Patch 6 support multi hardware. > > Patch 7 separate video encoder and decoder document > > Patch 8-17 add interfaces to support core hardware. > > Patch 18-19 remove mtk_vcodec_release_dec/enc_pm interfaces. > > I'm getting quite a few warnings from scripts/checkpatch.pl --strict > when I > run that over the patches. Please fix the reported issues where it > makes sense > to do so. > > I'm also getting a sparse warning: > > drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.c:22:27: warning: > symbol 'mtk_vdec_hw_match' was not declared. Should it be static? > > And a smatch warning: > > drivers/media/platform/mtk-vcodec/vdec_msg_queue.c:273 > vdec_msg_queue_init() warn: missing error code 'err' > > There are also a few kerneldoc errors/warnings: > > drivers/media/platform/mtk-vcodec/vdec_msg_queue.h:38: warning: > Function parameter or member 'ready_to_use' not described in > 'vdec_msg_queue_ctx' > drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h:108: error: Cannot > parse struct or union! > drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h:118: error: Cannot > parse struct or union! > drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h:351: error: Cannot > parse struct or union! > drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.h:27: warning: > Enum value 'VDEC_HW_SYS' not described in enum 'mtk_vdec_hw_reg_idx' > drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.h:27: warning: > Enum value 'VDEC_HW_MISC' not described in enum 'mtk_vdec_hw_reg_idx' > drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.h:27: warning: > Enum value 'VDEC_HW_MAX' not described in enum 'mtk_vdec_hw_reg_idx' > > Other than these issues this series looks about ready to be merged. > Let me know when > you post v18 whether it is indeed ready to be merged or if you need > more reviews from > people. > > Regards, > > Hans > > PS: I had to delete a bunch of CCs. For some reason my smtp server > had problems with it. Sorry about that. > > > --- > > changes compared with v16: > > - fix build warning for patch 13. > > > > changes compared with v15: > > - add Reviewed-by for patch 10. > > > > changes compared with v14: > > - rebase to latest media stage. > > > > changes compared with v13: > > - change some function position in case of ko dependency for patch > > 15. > > - add reviewed-by for patch 06/13/15. > > > > changes compared with v12: > > - fix comments from rob for patch 15. > > - fix comments from steve for 06 and 13. > > > > changes compared with v11: > > - fix comments from AngeloGioacchino for patch 09~11/19. > > - fix comments from steve for patch 03/19. > > > > changes compared with v10: > > - fix comments from tzung-bi for patch 06/19. > > - add more detail information for hardware block diagram 15/19 > > > > changes compared with v9: > > - need not to build ko, just export pm interfaces for patch 04/19. > > - fix comments for patch 06/19 > > > > changes compared with v8: > > - add new patch 18~19 to remove mtk_vcodec_release_de/enc_pm > > interfaces. > > - fix spelling mistakes for patch 17/19 > > - fix yaml comments for patch 15/19 > > > > Changes compared with v7: > > - add new patch 4 to build decoder pm file as module > > - add new patch 5 to support 8192 > > - fix comments for patch 6/17 > > - change some logic for using work queue instead of create thread > > for core hardware decode for patch 10/17 > > - using work queue for hardware decode instead of create thread for > > patch 13/17 > > - add returen value for patch 14/17 > > - fix yaml check fail 15/17 > > > > Changes compared with v6: > > - Use of_platform_populate to manage multi hardware, not component > > framework for patch 4/15 > > - Re-write dtsi document for hardware architecture changed for > > patch 13/15 -The dtsi will write like below in patch 13/15: > > vcodec_dec: vcodec_dec@16000000 { > > compatible = "mediatek,mt8192-vcodec-dec"; > > #address-cells = <2>; > > #size-cells = <2>; > > ranges; > > reg = <0 0x16000000 0 0x1000>; /* VDEC_SYS */ > > mediatek,scp = <&scp>; > > iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>; > > dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>; > > vcodec_lat { > > compatible = "mediatek,mtk-vcodec-lat"; > > reg = <0 0x16010000 0 0x800>; /* VDEC_MISC */ > > reg-name = "reg-misc"; > > interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH 0>; > > iommus = <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD_EXT>, > > <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD2_EXT>, > > <&iommu0 M4U_PORT_L5_VDEC_LAT0_AVC_MV_EXT>, > > <&iommu0 M4U_PORT_L5_VDEC_LAT0_PRED_RD_EXT>, > > <&iommu0 M4U_PORT_L5_VDEC_LAT0_TILE_EXT>, > > <&iommu0 M4U_PORT_L5_VDEC_LAT0_WDMA_EXT>, > > <&iommu0 M4U_PORT_L5_VDEC_LAT0_RG_CTRL_DMA_EXT>, > > <&iommu0 M4U_PORT_L5_VDEC_UFO_ENC_EXT>; > > clocks = <&topckgen CLK_TOP_VDEC_SEL>, > > <&vdecsys_soc CLK_VDEC_SOC_VDEC>, > > <&vdecsys_soc CLK_VDEC_SOC_LAT>, > > <&vdecsys_soc CLK_VDEC_SOC_LARB1>, > > <&topckgen CLK_TOP_MAINPLL_D4>; > > clock-names = "vdec-sel", "vdec-soc-vdec", "vdec-soc- > > lat", > > "vdec-vdec", "vdec-top"; > > assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>; > > assigned-clock-parents = <&topckgen > > CLK_TOP_MAINPLL_D4>; > > power-domains = <&spm MT8192_POWER_DOMAIN_VDEC>; > > }; > > > > vcodec_core { > > compatible = "mediatek,mtk-vcodec-core"; > > reg = <0 0x16025000 0 0x1000>; /* > > VDEC_CORE_MISC */ > > reg-names = "reg-misc"; > > interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH 0>; > > iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>, > > <&iommu0 M4U_PORT_L4_VDEC_UFO_EXT>, > > <&iommu0 M4U_PORT_L4_VDEC_PP_EXT>, > > <&iommu0 M4U_PORT_L4_VDEC_PRED_RD_EXT>, > > <&iommu0 M4U_PORT_L4_VDEC_PRED_WR_EXT>, > > <&iommu0 M4U_PORT_L4_VDEC_PPWRAP_EXT>, > > <&iommu0 M4U_PORT_L4_VDEC_TILE_EXT>, > > <&iommu0 M4U_PORT_L4_VDEC_VLD_EXT>, > > <&iommu0 M4U_PORT_L4_VDEC_VLD2_EXT>, > > <&iommu0 M4U_PORT_L4_VDEC_AVC_MV_EXT>, > > <&iommu0 M4U_PORT_L4_VDEC_RG_CTRL_DMA_EXT>; > > clocks = <&topckgen CLK_TOP_VDEC_SEL>, > > <&vdecsys CLK_VDEC_VDEC>, > > <&vdecsys CLK_VDEC_LAT>, > > <&vdecsys CLK_VDEC_LARB1>, > > <&topckgen CLK_TOP_MAINPLL_D4>; > > clock-names = "vdec-sel", "vdec-soc-vdec", "vdec-soc- > > lat", > > "vdec-vdec", "vdec-top"; > > assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>; > > assigned-clock-parents = <&topckgen > > CLK_TOP_MAINPLL_D4>; > > power-domains = <&spm MT8192_POWER_DOMAIN_VDEC2>; > > }; > > }; > > > > Changes compared with v5: > > - Add decoder hardware block diagram for patch 13/15 > > > > Changes compared with v4: > > - Fix comments for patch 4/15 > > >> + if (dev->is_comp_supported) { > > >> + ret = mtk_vcodec_init_master(dev); > > >> + if (ret < 0) > > >> + goto err_component_match; > > >> + } else { > > >> + platform_set_drvdata(pdev, dev); > > >> + } > > Fix platform_set_drvdata. > > - Fix build error for patch 9/15 > > - Add depend patch in case of error header file for patch 13/15 > > > > Changes compared with v3: > > - Fix return value for patch 1/15 > > - Fix comments for patch 4/15 > > > Looking up "mediatek,mtk-vcodec-core" to determine if it uses > > component framwork sounds like... > > Add prameter in pdata, for all platform will use compoent after > > mt8183 > > > > >> + if (dev->is_comp_supported) { > > >> + ret = mtk_vcodec_init_master(dev); > > >> + if (ret < 0) > > >> + goto err_component_match; > > >> + } else { > > >> + platform_set_drvdata(pdev, dev); > > >> + } > > > + Has asked the same question in [1]. Why it removes the > > > +platform_set_drvdata() above? mtk_vcodec_init_master() also > > calls platform_set_drvdata(). > > Must call component_master_add_with_match after > > platform_set_drvdata for component architecture. > > - Fix yaml files check fail for patch 5/15 > > - Fix yaml file check fail for patch 14/15 > > > > Changes compared with v1: > > - Fix many comments for patch 3/14 > > - Remove unnecessary code for patch 4/14 > > - Using enum mtk_vdec_hw_count instead of magic numbers for patch > > 6/14 > > - Reconstructed get/put lat buffer for lat and core hardware for > > patch 7/14 > > - Using yaml format to instead of txt file for patch 12/14 > > > > Yunfei Dong (19): > > media: mtk-vcodec: Get numbers of register bases from DT > > media: mtk-vcodec: Align vcodec wake up interrupt interface > > media: mtk-vcodec: Refactor vcodec pm interface > > media: mtk-vcodec: export decoder pm functions > > media: mtk-vcodec: Support MT8192 > > media: mtk-vcodec: Add to support multi hardware decode > > dt-bindings: media: mtk-vcodec: Separate video encoder and > > decoder > > dt-bindings > > media: mtk-vcodec: Use pure single core for MT8183 > > media: mtk-vcodec: Add irq interface for multi hardware > > media: mtk-vcodec: Add msg queue feature for lat and core > > architecture > > media: mtk-vcodec: Generalize power and clock on/off interfaces > > media: mtk-vcodec: Add new interface to lock different hardware > > media: mtk-vcodec: Add work queue for core hardware decode > > media: mtk-vcodec: Support 34bits dma address for vdec > > dt-bindings: media: mtk-vcodec: Adds decoder dt-bindings for > > mt8192 > > media: mtk-vcodec: Add core dec and dec end ipi msg > > media: mtk-vcodec: Use codec type to separate different hardware > > media: mtk-vcodec: Remove mtk_vcodec_release_dec_pm > > media: mtk-vcodec: Remove mtk_vcodec_release_enc_pm > > > > .../media/mediatek,vcodec-decoder.yaml | 176 +++++++++++ > > .../media/mediatek,vcodec-encoder.yaml | 187 ++++++++++++ > > .../media/mediatek,vcodec-subdev-decoder.yaml | 265 > > ++++++++++++++++ > > .../bindings/media/mediatek-vcodec.txt | 131 -------- > > drivers/media/platform/mtk-vcodec/Makefile | 6 +- > > .../platform/mtk-vcodec/mtk_vcodec_dec.c | 4 +- > > .../platform/mtk-vcodec/mtk_vcodec_dec.h | 1 + > > .../platform/mtk-vcodec/mtk_vcodec_dec_drv.c | 177 ++++++++--- > > .../platform/mtk-vcodec/mtk_vcodec_dec_hw.c | 201 ++++++++++++ > > .../platform/mtk-vcodec/mtk_vcodec_dec_hw.h | 53 ++++ > > .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c | 104 +++++-- > > .../platform/mtk-vcodec/mtk_vcodec_dec_pm.h | 12 +- > > .../mtk-vcodec/mtk_vcodec_dec_stateful.c | 2 + > > .../mtk-vcodec/mtk_vcodec_dec_stateless.c | 21 ++ > > .../platform/mtk-vcodec/mtk_vcodec_drv.h | 73 ++++- > > .../platform/mtk-vcodec/mtk_vcodec_enc_drv.c | 21 +- > > .../platform/mtk-vcodec/mtk_vcodec_enc_pm.c | 10 +- > > .../platform/mtk-vcodec/mtk_vcodec_enc_pm.h | 3 +- > > .../platform/mtk-vcodec/mtk_vcodec_intr.c | 27 +- > > .../platform/mtk-vcodec/mtk_vcodec_intr.h | 4 +- > > .../platform/mtk-vcodec/mtk_vcodec_util.c | 59 +++- > > .../platform/mtk-vcodec/mtk_vcodec_util.h | 8 +- > > .../platform/mtk-vcodec/vdec/vdec_h264_if.c | 2 +- > > .../mtk-vcodec/vdec/vdec_h264_req_if.c | 2 +- > > .../platform/mtk-vcodec/vdec/vdec_vp8_if.c | 2 +- > > .../platform/mtk-vcodec/vdec/vdec_vp9_if.c | 2 +- > > .../media/platform/mtk-vcodec/vdec_drv_if.c | 21 +- > > .../media/platform/mtk-vcodec/vdec_ipi_msg.h | 16 +- > > .../platform/mtk-vcodec/vdec_msg_queue.c | 289 > > ++++++++++++++++++ > > .../platform/mtk-vcodec/vdec_msg_queue.h | 143 +++++++++ > > .../media/platform/mtk-vcodec/vdec_vpu_if.c | 46 ++- > > .../media/platform/mtk-vcodec/vdec_vpu_if.h | 22 ++ > > .../platform/mtk-vcodec/venc/venc_h264_if.c | 2 +- > > .../platform/mtk-vcodec/venc/venc_vp8_if.c | 2 +- > > 34 files changed, 1800 insertions(+), 294 deletions(-) > > create mode 100644 > > Documentation/devicetree/bindings/media/mediatek,vcodec- > > decoder.yaml > > create mode 100644 > > Documentation/devicetree/bindings/media/mediatek,vcodec- > > encoder.yaml > > create mode 100644 > > Documentation/devicetree/bindings/media/mediatek,vcodec-subdev- > > decoder.yaml > > delete mode 100644 > > Documentation/devicetree/bindings/media/mediatek-vcodec.txt > > create mode 100644 drivers/media/platform/mtk- > > vcodec/mtk_vcodec_dec_hw.c > > create mode 100644 drivers/media/platform/mtk- > > vcodec/mtk_vcodec_dec_hw.h > > create mode 100644 drivers/media/platform/mtk- > > vcodec/vdec_msg_queue.c > > create mode 100644 drivers/media/platform/mtk- > > vcodec/vdec_msg_queue.h > > > >
This series adds support for multi hardware decode into mtk-vcodec, by first adding use of_platform_populate to manage each hardware information: interrupt, clock, register bases and power. Secondly add core work queue to deal with core hardware message, at the same time, add msg queue for different hardware share messages. Lastly, the architecture of different specs are not the same, using specs type to separate them. This series has been tested with both MT8183 and MT8173. Decoding was working for both chips. Patches 1~3 rewrite get register bases and power on/off interface. Patches 4 export decoder pm interfaces. Patches 5 add to support 8192. Patch 6 support multi hardware. Patch 7 separate video encoder and decoder document Patch 8-17 add interfaces to support core hardware. Patch 18-19 remove mtk_vcodec_release_dec/enc_pm interfaces. --- changes compared with v16: - fix build warning for patch 13. changes compared with v15: - add Reviewed-by for patch 10. changes compared with v14: - rebase to latest media stage. changes compared with v13: - change some function position in case of ko dependency for patch 15. - add reviewed-by for patch 06/13/15. changes compared with v12: - fix comments from rob for patch 15. - fix comments from steve for 06 and 13. changes compared with v11: - fix comments from AngeloGioacchino for patch 09~11/19. - fix comments from steve for patch 03/19. changes compared with v10: - fix comments from tzung-bi for patch 06/19. - add more detail information for hardware block diagram 15/19 changes compared with v9: - need not to build ko, just export pm interfaces for patch 04/19. - fix comments for patch 06/19 changes compared with v8: - add new patch 18~19 to remove mtk_vcodec_release_de/enc_pm interfaces. - fix spelling mistakes for patch 17/19 - fix yaml comments for patch 15/19 Changes compared with v7: - add new patch 4 to build decoder pm file as module - add new patch 5 to support 8192 - fix comments for patch 6/17 - change some logic for using work queue instead of create thread for core hardware decode for patch 10/17 - using work queue for hardware decode instead of create thread for patch 13/17 - add returen value for patch 14/17 - fix yaml check fail 15/17 Changes compared with v6: - Use of_platform_populate to manage multi hardware, not component framework for patch 4/15 - Re-write dtsi document for hardware architecture changed for patch 13/15 -The dtsi will write like below in patch 13/15: vcodec_dec: vcodec_dec@16000000 { compatible = "mediatek,mt8192-vcodec-dec"; #address-cells = <2>; #size-cells = <2>; ranges; reg = <0 0x16000000 0 0x1000>; /* VDEC_SYS */ mediatek,scp = <&scp>; iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>; dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>; vcodec_lat { compatible = "mediatek,mtk-vcodec-lat"; reg = <0 0x16010000 0 0x800>; /* VDEC_MISC */ reg-name = "reg-misc"; interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH 0>; iommus = <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD_EXT>, <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD2_EXT>, <&iommu0 M4U_PORT_L5_VDEC_LAT0_AVC_MV_EXT>, <&iommu0 M4U_PORT_L5_VDEC_LAT0_PRED_RD_EXT>, <&iommu0 M4U_PORT_L5_VDEC_LAT0_TILE_EXT>, <&iommu0 M4U_PORT_L5_VDEC_LAT0_WDMA_EXT>, <&iommu0 M4U_PORT_L5_VDEC_LAT0_RG_CTRL_DMA_EXT>, <&iommu0 M4U_PORT_L5_VDEC_UFO_ENC_EXT>; clocks = <&topckgen CLK_TOP_VDEC_SEL>, <&vdecsys_soc CLK_VDEC_SOC_VDEC>, <&vdecsys_soc CLK_VDEC_SOC_LAT>, <&vdecsys_soc CLK_VDEC_SOC_LARB1>, <&topckgen CLK_TOP_MAINPLL_D4>; clock-names = "vdec-sel", "vdec-soc-vdec", "vdec-soc-lat", "vdec-vdec", "vdec-top"; assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>; assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4>; power-domains = <&spm MT8192_POWER_DOMAIN_VDEC>; }; vcodec_core { compatible = "mediatek,mtk-vcodec-core"; reg = <0 0x16025000 0 0x1000>; /* VDEC_CORE_MISC */ reg-names = "reg-misc"; interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH 0>; iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>, <&iommu0 M4U_PORT_L4_VDEC_UFO_EXT>, <&iommu0 M4U_PORT_L4_VDEC_PP_EXT>, <&iommu0 M4U_PORT_L4_VDEC_PRED_RD_EXT>, <&iommu0 M4U_PORT_L4_VDEC_PRED_WR_EXT>, <&iommu0 M4U_PORT_L4_VDEC_PPWRAP_EXT>, <&iommu0 M4U_PORT_L4_VDEC_TILE_EXT>, <&iommu0 M4U_PORT_L4_VDEC_VLD_EXT>, <&iommu0 M4U_PORT_L4_VDEC_VLD2_EXT>, <&iommu0 M4U_PORT_L4_VDEC_AVC_MV_EXT>, <&iommu0 M4U_PORT_L4_VDEC_RG_CTRL_DMA_EXT>; clocks = <&topckgen CLK_TOP_VDEC_SEL>, <&vdecsys CLK_VDEC_VDEC>, <&vdecsys CLK_VDEC_LAT>, <&vdecsys CLK_VDEC_LARB1>, <&topckgen CLK_TOP_MAINPLL_D4>; clock-names = "vdec-sel", "vdec-soc-vdec", "vdec-soc-lat", "vdec-vdec", "vdec-top"; assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>; assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4>; power-domains = <&spm MT8192_POWER_DOMAIN_VDEC2>; }; }; Changes compared with v5: - Add decoder hardware block diagram for patch 13/15 Changes compared with v4: - Fix comments for patch 4/15 >> + if (dev->is_comp_supported) { >> + ret = mtk_vcodec_init_master(dev); >> + if (ret < 0) >> + goto err_component_match; >> + } else { >> + platform_set_drvdata(pdev, dev); >> + } Fix platform_set_drvdata. - Fix build error for patch 9/15 - Add depend patch in case of error header file for patch 13/15 Changes compared with v3: - Fix return value for patch 1/15 - Fix comments for patch 4/15 > Looking up "mediatek,mtk-vcodec-core" to determine if it uses component framwork sounds like... Add prameter in pdata, for all platform will use compoent after mt8183 >> + if (dev->is_comp_supported) { >> + ret = mtk_vcodec_init_master(dev); >> + if (ret < 0) >> + goto err_component_match; >> + } else { >> + platform_set_drvdata(pdev, dev); >> + } > + Has asked the same question in [1]. Why it removes the > +platform_set_drvdata() above? mtk_vcodec_init_master() also calls platform_set_drvdata(). Must call component_master_add_with_match after platform_set_drvdata for component architecture. - Fix yaml files check fail for patch 5/15 - Fix yaml file check fail for patch 14/15 Changes compared with v1: - Fix many comments for patch 3/14 - Remove unnecessary code for patch 4/14 - Using enum mtk_vdec_hw_count instead of magic numbers for patch 6/14 - Reconstructed get/put lat buffer for lat and core hardware for patch 7/14 - Using yaml format to instead of txt file for patch 12/14 Yunfei Dong (19): media: mtk-vcodec: Get numbers of register bases from DT media: mtk-vcodec: Align vcodec wake up interrupt interface media: mtk-vcodec: Refactor vcodec pm interface media: mtk-vcodec: export decoder pm functions media: mtk-vcodec: Support MT8192 media: mtk-vcodec: Add to support multi hardware decode dt-bindings: media: mtk-vcodec: Separate video encoder and decoder dt-bindings media: mtk-vcodec: Use pure single core for MT8183 media: mtk-vcodec: Add irq interface for multi hardware media: mtk-vcodec: Add msg queue feature for lat and core architecture media: mtk-vcodec: Generalize power and clock on/off interfaces media: mtk-vcodec: Add new interface to lock different hardware media: mtk-vcodec: Add work queue for core hardware decode media: mtk-vcodec: Support 34bits dma address for vdec dt-bindings: media: mtk-vcodec: Adds decoder dt-bindings for mt8192 media: mtk-vcodec: Add core dec and dec end ipi msg media: mtk-vcodec: Use codec type to separate different hardware media: mtk-vcodec: Remove mtk_vcodec_release_dec_pm media: mtk-vcodec: Remove mtk_vcodec_release_enc_pm .../media/mediatek,vcodec-decoder.yaml | 176 +++++++++++ .../media/mediatek,vcodec-encoder.yaml | 187 ++++++++++++ .../media/mediatek,vcodec-subdev-decoder.yaml | 265 ++++++++++++++++ .../bindings/media/mediatek-vcodec.txt | 131 -------- drivers/media/platform/mtk-vcodec/Makefile | 6 +- .../platform/mtk-vcodec/mtk_vcodec_dec.c | 4 +- .../platform/mtk-vcodec/mtk_vcodec_dec.h | 1 + .../platform/mtk-vcodec/mtk_vcodec_dec_drv.c | 177 ++++++++--- .../platform/mtk-vcodec/mtk_vcodec_dec_hw.c | 201 ++++++++++++ .../platform/mtk-vcodec/mtk_vcodec_dec_hw.h | 53 ++++ .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c | 104 +++++-- .../platform/mtk-vcodec/mtk_vcodec_dec_pm.h | 12 +- .../mtk-vcodec/mtk_vcodec_dec_stateful.c | 2 + .../mtk-vcodec/mtk_vcodec_dec_stateless.c | 21 ++ .../platform/mtk-vcodec/mtk_vcodec_drv.h | 73 ++++- .../platform/mtk-vcodec/mtk_vcodec_enc_drv.c | 21 +- .../platform/mtk-vcodec/mtk_vcodec_enc_pm.c | 10 +- .../platform/mtk-vcodec/mtk_vcodec_enc_pm.h | 3 +- .../platform/mtk-vcodec/mtk_vcodec_intr.c | 27 +- .../platform/mtk-vcodec/mtk_vcodec_intr.h | 4 +- .../platform/mtk-vcodec/mtk_vcodec_util.c | 59 +++- .../platform/mtk-vcodec/mtk_vcodec_util.h | 8 +- .../platform/mtk-vcodec/vdec/vdec_h264_if.c | 2 +- .../mtk-vcodec/vdec/vdec_h264_req_if.c | 2 +- .../platform/mtk-vcodec/vdec/vdec_vp8_if.c | 2 +- .../platform/mtk-vcodec/vdec/vdec_vp9_if.c | 2 +- .../media/platform/mtk-vcodec/vdec_drv_if.c | 21 +- .../media/platform/mtk-vcodec/vdec_ipi_msg.h | 16 +- .../platform/mtk-vcodec/vdec_msg_queue.c | 289 ++++++++++++++++++ .../platform/mtk-vcodec/vdec_msg_queue.h | 143 +++++++++ .../media/platform/mtk-vcodec/vdec_vpu_if.c | 46 ++- .../media/platform/mtk-vcodec/vdec_vpu_if.h | 22 ++ .../platform/mtk-vcodec/venc/venc_h264_if.c | 2 +- .../platform/mtk-vcodec/venc/venc_vp8_if.c | 2 +- 34 files changed, 1800 insertions(+), 294 deletions(-) create mode 100644 Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml create mode 100644 Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml create mode 100644 Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml delete mode 100644 Documentation/devicetree/bindings/media/mediatek-vcodec.txt create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.c create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.h create mode 100644 drivers/media/platform/mtk-vcodec/vdec_msg_queue.c create mode 100644 drivers/media/platform/mtk-vcodec/vdec_msg_queue.h