mbox series

[0/5] Add sc8280xp CCI and CAMSS core dtsi

Message ID 20231006120159.3413789-1-bryan.odonoghue@linaro.org
Headers show
Series Add sc8280xp CCI and CAMSS core dtsi | expand

Message

Bryan O'Donoghue Oct. 6, 2023, 12:01 p.m. UTC 
The sc8280xp provides a standard Camera Control Interface and Camera
SubSystem hardware interface similar to antecedent parts sdm845 and
sm8250.

Per the target segments for this part, sc8280xp has more of everything.
More CCI, VFE, CSIPHY and therefore more interrupt lines and clocks to
declare.

CCI x 4
CSIPHY x 4
VFE x 4
VFE Lite x 4
CSID x 4

Bootable 6.5.y x13s:
https://git.codelinaro.org/bryan.odonoghue/kernel/-/tree/lenovo-x13s-linux-6.5.y

Linux next:
https://git.codelinaro.org/bryan.odonoghue/kernel/-/tree/linux-next-23-10-06-sc8280xp-camss

This patch depends-on:
https://lore.kernel.org/lkml/20231004161853.86382-2-bryan.odonoghue@linaro.org/T/

Bryan O'Donoghue (5):
  dt-bindings: i2c: qcom-cci: Document sc8280xp compatible
  i2c: qcom-cci: Add sc8280xp compatible
  arm64: dts: qcom: sc8280xp: camss: Add CCI definitions
  media: dt-bindings: media: camss: Add qcom,sc8280xp-camss binding
  arm64: dts: qcom: sc8280xp: camss: Add CAMSS block definition

 .../devicetree/bindings/i2c/qcom,i2c-cci.yaml |   2 +
 .../bindings/media/qcom,sc8280xp-camss.yaml   | 598 +++++++++++++++++
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi        | 608 ++++++++++++++++++
 drivers/i2c/busses/i2c-qcom-cci.c             |   1 +
 4 files changed, 1209 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml

Comments

Krzysztof Kozlowski Oct. 6, 2023, 12:29 p.m. UTC | #1 
On 06/10/2023 14:01, Bryan O'Donoghue wrote:
> Add sc8280xp compatible consistent with recent CAMSS CCI interfaces.
> 
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof