| Message ID | 20231012114642.19040-1-benjamin.gaignard@collabora.com |
|---|---|
| Headers | show |
| Series | Add DELETE_BUF ioctl | expand |
Hi Benjamin, On 12/10/2023 13:45, Benjamin Gaignard wrote: > Unlike when resolution change on keyframes, dynamic resolution change > on inter frames doesn't allow to do a stream off/on sequence because > it is need to keep all previous references alive to decode inter frames. > This constraint have two main problems: > - more memory consumption. > - more buffers in use. > To solve these issue this series introduce DELETE_BUFS ioctl and remove > the 32 buffers limit per queue. > > VP9 conformance tests using fluster give a score of 210/305. > The 20 resize inter tests (vp90-2-21-resize_inter_* files) are ok > but require to use postprocessor. > > Kernel branch is available here: > https://gitlab.collabora.com/benjamin.gaignard/for-upstream/-/commits/remove_vb2_queue_limit_v11 > > GStreamer branch to use DELETE_BUF ioctl and testing dynamic resolution > change is here: > https://gitlab.freedesktop.org/benjamin.gaignard1/gstreamer/-/commits/VP9_drc I did another review. Mainly small stuff, but I realized in my review of 40/56 that the use of min_buffers_needed is a mess, and you will need to revisit any driver patches where you change that value, or where you drop the number of buffers check in queue_setup because you rely on min_buffers_needed. I think it is likely that we need to take another very good look at this before we implement VIDIOC_DELETE_BUFS. I have also posted a PR where I ask Mauro to merge patch 07/56 for 6.7 to get the vb2_get_num_buffers helper in. We'll see if that will happen since it is a bit late for that. Regards, Hans > > changes in version 11: > - Patches ordering: > 1 to 3: clean up > 3 to 42: use vb2_get_buffer() and vb2_get_num_buffers() > 43 to 46: allow to use more than 32 buffers per queue > 47 to 50: allow verisilicon driver to do VP9 dynamic resolution change > (which was the main purpose of this work) > 51 to 56: prepare and introduce delete buffers feature. > - Add a patch to rename 'off' to offset. > - Add maintainers CC to drivers patches > > changes in version 10: > - Make BUFFER_INDEX_MASK definition more readable > - Rebase on media_stage/master branch and add a patch for nuvoton > driver. > - Fix issue on patch 13 > > changes in version 9: > - BUFFER_INDEX_MASK now depends on PAGE_SHIFT value to match > architectures requirements. > - Correctly initialize max_num_buffers in vb2_core_queue_init() > - run 'test-media -kmemleak mc' on top of the series and on patches 1 to 47 without failures. > - fix compilation issue in patch 50 > > changes in version 8: > - Add V4L2_BUF_CAP_SUPPORTS_SET_MAX_BUFS and new 'max_buffers' field in v4l2_create_buffers > structure to report the maximum number of buffers that a queue could allocate. > - Add V4L2_BUF_CAP_SUPPORTS_DELETE_BUFS to indicate that a queue support > DELETE_BUFS ioctl. > - Make some test drivers use more than 32 buffers and DELETE_BUFS ioctl. > - Fix remarks done by Hans > - Move "media: core: Rework how create_buf index returned value is > computed" patch to the top of the serie. > > changes in version 7: > - Use a bitmap to know which entries are valid in queue bufs array. > The number of buffers in the queue could must calculated from the > bitmap so num_buffers becomes useless. This led to add quite few > patches to remove it from all the drivers. > Note: despiste my attention I may have miss some calls to > num_buffers... > - Split patches to make them more readable. > - Run v4l2-compliance with additional delete-bufs tests. > - Run ./test-media -kmemleak vivid and no more failures. > Note: I had to remove USERPTR streaming test because they to much > frequentely hit get_framevec bug. It is not related to my series > since this happens all the time on master branch. > - Fix Hans remarks on v6 > > changes in version 6: > - Get a patch per driver to use vb2_get_buffer() instead of directly access > to queue buffers array. > - Add lock in vb2_core_delete_buf() > - Use vb2_buffer instead of index > - Fix various comments > - Change buffer index name to BUFFER_INDEX_MASK > - Stop spamming kernel log with unbalanced counters > > Benjamin Gaignard (56): > media: videobuf2: Rename offset parameter > media: videobuf2: Rework offset 'cookie' encoding pattern > media: videobuf2: Stop spamming kernel log with all queue counter > media: videobuf2: Use vb2_buffer instead of index > media: videobuf2: Access vb2_queue bufs array through helper functions > media: videobuf2: Remove duplicated index vs q->num_buffers check > media: videobuf2: Add helper to get queue number of buffers > media: videobuf2: Use vb2_get_num_buffers() helper > media: amphion: Use vb2_get_buffer() instead of directly access to > buffers array > media: amphion: Stop direct calls to queue num_buffers field > media: mediatek: jpeg: Use vb2_get_buffer() instead of directly access > to buffers array > media: mediatek: vdec: Remove useless loop > media: mediatek: vcodec: Stop direct calls to queue num_buffers field > media: sti: hva: Use vb2_get_buffer() instead of directly access to > buffers array > media: visl: Use vb2_get_buffer() instead of directly access to > buffers array > media: atomisp: Use vb2_get_buffer() instead of directly access to > buffers array > media: atomisp: Stop direct calls to queue num_buffers field > media: dvb-core: Use vb2_get_buffer() instead of directly access to > buffers array > media: dvb-core: Do not initialize twice queue num_buffer field > media: dvb-frontends: rtl2832_srd: Use queue min_buffers_needed field > media: video-i2c: Set min_buffers_needed to 2 > media: pci: cx18: Set correct value to min_buffers_needed field > media: pci: dt3155: Remove useless check > media: pci: netup_unidvb: Remove useless number of buffers check > media: pci: tw68: Stop direct calls to queue num_buffers field > media: pci: tw686x: Set min_buffers_needed to 3 > media: coda: Stop direct calls to queue num_buffers field > media: nxp: Stop direct calls to queue num_buffers field > media: renesas: Set min_buffers_needed to 16 > media: ti: Use queue min_buffers_needed field to set the min number of > buffers > media: verisilicon: Stop direct calls to queue num_buffers field > media: test-drivers: Stop direct calls to queue num_buffers field > media: usb: airspy: Set min_buffers_needed to 8 > media: usb: cx231xx: Set min_buffers_needed to CX231XX_MIN_BUF > media: usb: hackrf: Set min_buffers_needed to 8 > media: usb: usbtv: Set min_buffers_needed to 2 > media: imx: Stop direct calls to queue num_buffers field > media: meson: vdec: Stop direct calls to queue num_buffers field > touchscreen: sur40: Stop direct calls to queue num_buffers field > sample: v4l: Stop direct calls to queue num_buffers field > media: cedrus: Stop direct calls to queue num_buffers field > media: nuvoton: Stop direct calls to queue num_buffers field > media: videobuf2: Be more flexible on the number of queue stored > buffers > media: core: Report the maximum possible number of buffers for the > queue > media: test-drivers: vivid: Increase max supported buffers for capture > queues > media: test-drivers: vicodec: Increase max supported capture queue > buffers > media: verisilicon: Refactor postprocessor to store more buffers > media: verisilicon: Store chroma and motion vectors offset > media: verisilicon: g2: Use common helpers to compute chroma and mv > offsets > media: verisilicon: vp9: Allow to change resolution while streaming > media: core: Rework how create_buf index returned value is computed > media: core: Add bitmap manage bufs array entries > media: core: Free range of buffers > media: v4l2: Add DELETE_BUFS ioctl > media: v4l2: Add mem2mem helpers for DELETE_BUFS ioctl > media: test-drivers: Use helper for DELETE_BUFS ioctl > > .../userspace-api/media/v4l/user-func.rst | 1 + > .../media/v4l/vidioc-create-bufs.rst | 8 +- > .../media/v4l/vidioc-delete-bufs.rst | 80 +++ > .../media/v4l/vidioc-reqbufs.rst | 2 + > drivers/input/touchscreen/sur40.c | 5 +- > .../media/common/videobuf2/videobuf2-core.c | 567 +++++++++++------- > .../media/common/videobuf2/videobuf2-v4l2.c | 116 +++- > drivers/media/dvb-core/dvb_vb2.c | 17 +- > drivers/media/dvb-frontends/rtl2832_sdr.c | 9 +- > drivers/media/i2c/video-i2c.c | 5 +- > drivers/media/pci/cx18/cx18-streams.c | 13 +- > drivers/media/pci/dt3155/dt3155.c | 2 - > .../pci/netup_unidvb/netup_unidvb_core.c | 4 +- > drivers/media/pci/tw68/tw68-video.c | 6 +- > drivers/media/pci/tw686x/tw686x-video.c | 13 +- > drivers/media/platform/amphion/vpu_dbg.c | 30 +- > drivers/media/platform/amphion/vpu_v4l2.c | 4 +- > .../media/platform/chips-media/coda-common.c | 2 +- > .../platform/mediatek/jpeg/mtk_jpeg_core.c | 7 +- > .../vcodec/decoder/vdec/vdec_vp9_req_lat_if.c | 9 +- > .../mediatek/vcodec/encoder/mtk_vcodec_enc.c | 2 +- > drivers/media/platform/nuvoton/npcm-video.c | 2 +- > drivers/media/platform/nxp/imx7-media-csi.c | 7 +- > drivers/media/platform/renesas/rcar_drif.c | 8 +- > drivers/media/platform/st/sti/hva/hva-v4l2.c | 9 +- > .../media/platform/ti/am437x/am437x-vpfe.c | 7 +- > drivers/media/platform/ti/cal/cal-video.c | 5 +- > .../media/platform/ti/davinci/vpif_capture.c | 5 +- > .../media/platform/ti/davinci/vpif_display.c | 5 +- > drivers/media/platform/ti/omap/omap_vout.c | 5 +- > drivers/media/platform/verisilicon/hantro.h | 9 +- > .../media/platform/verisilicon/hantro_drv.c | 5 +- > .../media/platform/verisilicon/hantro_g2.c | 14 + > .../platform/verisilicon/hantro_g2_hevc_dec.c | 18 +- > .../platform/verisilicon/hantro_g2_vp9_dec.c | 28 +- > .../media/platform/verisilicon/hantro_hw.h | 7 +- > .../platform/verisilicon/hantro_postproc.c | 93 ++- > .../media/platform/verisilicon/hantro_v4l2.c | 27 +- > .../media/test-drivers/vicodec/vicodec-core.c | 3 + > drivers/media/test-drivers/vim2m.c | 2 + > .../media/test-drivers/vimc/vimc-capture.c | 2 + > drivers/media/test-drivers/visl/visl-dec.c | 32 +- > drivers/media/test-drivers/visl/visl-video.c | 2 + > drivers/media/test-drivers/vivid/vivid-core.c | 14 + > .../media/test-drivers/vivid/vivid-meta-cap.c | 3 - > .../media/test-drivers/vivid/vivid-meta-out.c | 5 +- > .../test-drivers/vivid/vivid-touch-cap.c | 5 +- > .../media/test-drivers/vivid/vivid-vbi-cap.c | 5 +- > .../media/test-drivers/vivid/vivid-vbi-out.c | 5 +- > .../media/test-drivers/vivid/vivid-vid-cap.c | 5 +- > .../media/test-drivers/vivid/vivid-vid-out.c | 5 +- > drivers/media/usb/airspy/airspy.c | 9 +- > drivers/media/usb/cx231xx/cx231xx-417.c | 4 +- > drivers/media/usb/cx231xx/cx231xx-video.c | 4 +- > drivers/media/usb/hackrf/hackrf.c | 9 +- > drivers/media/usb/usbtv/usbtv-video.c | 3 +- > drivers/media/v4l2-core/v4l2-dev.c | 1 + > drivers/media/v4l2-core/v4l2-ioctl.c | 21 +- > drivers/media/v4l2-core/v4l2-mem2mem.c | 20 + > .../staging/media/atomisp/pci/atomisp_ioctl.c | 4 +- > drivers/staging/media/imx/imx-media-capture.c | 7 +- > drivers/staging/media/meson/vdec/vdec.c | 13 +- > .../staging/media/sunxi/cedrus/cedrus_h264.c | 8 +- > .../staging/media/sunxi/cedrus/cedrus_h265.c | 9 +- > include/media/v4l2-ioctl.h | 4 + > include/media/v4l2-mem2mem.h | 12 + > include/media/videobuf2-core.h | 65 +- > include/media/videobuf2-v4l2.h | 13 + > include/uapi/linux/videodev2.h | 24 +- > samples/v4l/v4l2-pci-skeleton.c | 5 +- > 70 files changed, 972 insertions(+), 507 deletions(-) > create mode 100644 Documentation/userspace-api/media/v4l/vidioc-delete-bufs.rst >
Le 16/10/2023 à 12:39, Hans Verkuil a écrit : > Hi Benjamin, > > On 12/10/2023 13:45, Benjamin Gaignard wrote: >> Unlike when resolution change on keyframes, dynamic resolution change >> on inter frames doesn't allow to do a stream off/on sequence because >> it is need to keep all previous references alive to decode inter frames. >> This constraint have two main problems: >> - more memory consumption. >> - more buffers in use. >> To solve these issue this series introduce DELETE_BUFS ioctl and remove >> the 32 buffers limit per queue. >> >> VP9 conformance tests using fluster give a score of 210/305. >> The 20 resize inter tests (vp90-2-21-resize_inter_* files) are ok >> but require to use postprocessor. >> >> Kernel branch is available here: >> https://gitlab.collabora.com/benjamin.gaignard/for-upstream/-/commits/remove_vb2_queue_limit_v11 >> >> GStreamer branch to use DELETE_BUF ioctl and testing dynamic resolution >> change is here: >> https://gitlab.freedesktop.org/benjamin.gaignard1/gstreamer/-/commits/VP9_drc > I did another review. Mainly small stuff, but I realized in my review of 40/56 that > the use of min_buffers_needed is a mess, and you will need to revisit any driver > patches where you change that value, or where you drop the number of buffers check > in queue_setup because you rely on min_buffers_needed. Ok I will comeback to the version where I only use vb2_get_num_buffers() is these drivers. Regards, Benjamin > > I think it is likely that we need to take another very good look at this before we > implement VIDIOC_DELETE_BUFS. > > I have also posted a PR where I ask Mauro to merge patch 07/56 for 6.7 to get > the vb2_get_num_buffers helper in. We'll see if that will happen since it is a > bit late for that. > > Regards, > > Hans > >> changes in version 11: >> - Patches ordering: >> 1 to 3: clean up >> 3 to 42: use vb2_get_buffer() and vb2_get_num_buffers() >> 43 to 46: allow to use more than 32 buffers per queue >> 47 to 50: allow verisilicon driver to do VP9 dynamic resolution change >> (which was the main purpose of this work) >> 51 to 56: prepare and introduce delete buffers feature. >> - Add a patch to rename 'off' to offset. >> - Add maintainers CC to drivers patches >> >> changes in version 10: >> - Make BUFFER_INDEX_MASK definition more readable >> - Rebase on media_stage/master branch and add a patch for nuvoton >> driver. >> - Fix issue on patch 13 >> >> changes in version 9: >> - BUFFER_INDEX_MASK now depends on PAGE_SHIFT value to match >> architectures requirements. >> - Correctly initialize max_num_buffers in vb2_core_queue_init() >> - run 'test-media -kmemleak mc' on top of the series and on patches 1 to 47 without failures. >> - fix compilation issue in patch 50 >> >> changes in version 8: >> - Add V4L2_BUF_CAP_SUPPORTS_SET_MAX_BUFS and new 'max_buffers' field in v4l2_create_buffers >> structure to report the maximum number of buffers that a queue could allocate. >> - Add V4L2_BUF_CAP_SUPPORTS_DELETE_BUFS to indicate that a queue support >> DELETE_BUFS ioctl. >> - Make some test drivers use more than 32 buffers and DELETE_BUFS ioctl. >> - Fix remarks done by Hans >> - Move "media: core: Rework how create_buf index returned value is >> computed" patch to the top of the serie. >> >> changes in version 7: >> - Use a bitmap to know which entries are valid in queue bufs array. >> The number of buffers in the queue could must calculated from the >> bitmap so num_buffers becomes useless. This led to add quite few >> patches to remove it from all the drivers. >> Note: despiste my attention I may have miss some calls to >> num_buffers... >> - Split patches to make them more readable. >> - Run v4l2-compliance with additional delete-bufs tests. >> - Run ./test-media -kmemleak vivid and no more failures. >> Note: I had to remove USERPTR streaming test because they to much >> frequentely hit get_framevec bug. It is not related to my series >> since this happens all the time on master branch. >> - Fix Hans remarks on v6 >> >> changes in version 6: >> - Get a patch per driver to use vb2_get_buffer() instead of directly access >> to queue buffers array. >> - Add lock in vb2_core_delete_buf() >> - Use vb2_buffer instead of index >> - Fix various comments >> - Change buffer index name to BUFFER_INDEX_MASK >> - Stop spamming kernel log with unbalanced counters >> >> Benjamin Gaignard (56): >> media: videobuf2: Rename offset parameter >> media: videobuf2: Rework offset 'cookie' encoding pattern >> media: videobuf2: Stop spamming kernel log with all queue counter >> media: videobuf2: Use vb2_buffer instead of index >> media: videobuf2: Access vb2_queue bufs array through helper functions >> media: videobuf2: Remove duplicated index vs q->num_buffers check >> media: videobuf2: Add helper to get queue number of buffers >> media: videobuf2: Use vb2_get_num_buffers() helper >> media: amphion: Use vb2_get_buffer() instead of directly access to >> buffers array >> media: amphion: Stop direct calls to queue num_buffers field >> media: mediatek: jpeg: Use vb2_get_buffer() instead of directly access >> to buffers array >> media: mediatek: vdec: Remove useless loop >> media: mediatek: vcodec: Stop direct calls to queue num_buffers field >> media: sti: hva: Use vb2_get_buffer() instead of directly access to >> buffers array >> media: visl: Use vb2_get_buffer() instead of directly access to >> buffers array >> media: atomisp: Use vb2_get_buffer() instead of directly access to >> buffers array >> media: atomisp: Stop direct calls to queue num_buffers field >> media: dvb-core: Use vb2_get_buffer() instead of directly access to >> buffers array >> media: dvb-core: Do not initialize twice queue num_buffer field >> media: dvb-frontends: rtl2832_srd: Use queue min_buffers_needed field >> media: video-i2c: Set min_buffers_needed to 2 >> media: pci: cx18: Set correct value to min_buffers_needed field >> media: pci: dt3155: Remove useless check >> media: pci: netup_unidvb: Remove useless number of buffers check >> media: pci: tw68: Stop direct calls to queue num_buffers field >> media: pci: tw686x: Set min_buffers_needed to 3 >> media: coda: Stop direct calls to queue num_buffers field >> media: nxp: Stop direct calls to queue num_buffers field >> media: renesas: Set min_buffers_needed to 16 >> media: ti: Use queue min_buffers_needed field to set the min number of >> buffers >> media: verisilicon: Stop direct calls to queue num_buffers field >> media: test-drivers: Stop direct calls to queue num_buffers field >> media: usb: airspy: Set min_buffers_needed to 8 >> media: usb: cx231xx: Set min_buffers_needed to CX231XX_MIN_BUF >> media: usb: hackrf: Set min_buffers_needed to 8 >> media: usb: usbtv: Set min_buffers_needed to 2 >> media: imx: Stop direct calls to queue num_buffers field >> media: meson: vdec: Stop direct calls to queue num_buffers field >> touchscreen: sur40: Stop direct calls to queue num_buffers field >> sample: v4l: Stop direct calls to queue num_buffers field >> media: cedrus: Stop direct calls to queue num_buffers field >> media: nuvoton: Stop direct calls to queue num_buffers field >> media: videobuf2: Be more flexible on the number of queue stored >> buffers >> media: core: Report the maximum possible number of buffers for the >> queue >> media: test-drivers: vivid: Increase max supported buffers for capture >> queues >> media: test-drivers: vicodec: Increase max supported capture queue >> buffers >> media: verisilicon: Refactor postprocessor to store more buffers >> media: verisilicon: Store chroma and motion vectors offset >> media: verisilicon: g2: Use common helpers to compute chroma and mv >> offsets >> media: verisilicon: vp9: Allow to change resolution while streaming >> media: core: Rework how create_buf index returned value is computed >> media: core: Add bitmap manage bufs array entries >> media: core: Free range of buffers >> media: v4l2: Add DELETE_BUFS ioctl >> media: v4l2: Add mem2mem helpers for DELETE_BUFS ioctl >> media: test-drivers: Use helper for DELETE_BUFS ioctl >> >> .../userspace-api/media/v4l/user-func.rst | 1 + >> .../media/v4l/vidioc-create-bufs.rst | 8 +- >> .../media/v4l/vidioc-delete-bufs.rst | 80 +++ >> .../media/v4l/vidioc-reqbufs.rst | 2 + >> drivers/input/touchscreen/sur40.c | 5 +- >> .../media/common/videobuf2/videobuf2-core.c | 567 +++++++++++------- >> .../media/common/videobuf2/videobuf2-v4l2.c | 116 +++- >> drivers/media/dvb-core/dvb_vb2.c | 17 +- >> drivers/media/dvb-frontends/rtl2832_sdr.c | 9 +- >> drivers/media/i2c/video-i2c.c | 5 +- >> drivers/media/pci/cx18/cx18-streams.c | 13 +- >> drivers/media/pci/dt3155/dt3155.c | 2 - >> .../pci/netup_unidvb/netup_unidvb_core.c | 4 +- >> drivers/media/pci/tw68/tw68-video.c | 6 +- >> drivers/media/pci/tw686x/tw686x-video.c | 13 +- >> drivers/media/platform/amphion/vpu_dbg.c | 30 +- >> drivers/media/platform/amphion/vpu_v4l2.c | 4 +- >> .../media/platform/chips-media/coda-common.c | 2 +- >> .../platform/mediatek/jpeg/mtk_jpeg_core.c | 7 +- >> .../vcodec/decoder/vdec/vdec_vp9_req_lat_if.c | 9 +- >> .../mediatek/vcodec/encoder/mtk_vcodec_enc.c | 2 +- >> drivers/media/platform/nuvoton/npcm-video.c | 2 +- >> drivers/media/platform/nxp/imx7-media-csi.c | 7 +- >> drivers/media/platform/renesas/rcar_drif.c | 8 +- >> drivers/media/platform/st/sti/hva/hva-v4l2.c | 9 +- >> .../media/platform/ti/am437x/am437x-vpfe.c | 7 +- >> drivers/media/platform/ti/cal/cal-video.c | 5 +- >> .../media/platform/ti/davinci/vpif_capture.c | 5 +- >> .../media/platform/ti/davinci/vpif_display.c | 5 +- >> drivers/media/platform/ti/omap/omap_vout.c | 5 +- >> drivers/media/platform/verisilicon/hantro.h | 9 +- >> .../media/platform/verisilicon/hantro_drv.c | 5 +- >> .../media/platform/verisilicon/hantro_g2.c | 14 + >> .../platform/verisilicon/hantro_g2_hevc_dec.c | 18 +- >> .../platform/verisilicon/hantro_g2_vp9_dec.c | 28 +- >> .../media/platform/verisilicon/hantro_hw.h | 7 +- >> .../platform/verisilicon/hantro_postproc.c | 93 ++- >> .../media/platform/verisilicon/hantro_v4l2.c | 27 +- >> .../media/test-drivers/vicodec/vicodec-core.c | 3 + >> drivers/media/test-drivers/vim2m.c | 2 + >> .../media/test-drivers/vimc/vimc-capture.c | 2 + >> drivers/media/test-drivers/visl/visl-dec.c | 32 +- >> drivers/media/test-drivers/visl/visl-video.c | 2 + >> drivers/media/test-drivers/vivid/vivid-core.c | 14 + >> .../media/test-drivers/vivid/vivid-meta-cap.c | 3 - >> .../media/test-drivers/vivid/vivid-meta-out.c | 5 +- >> .../test-drivers/vivid/vivid-touch-cap.c | 5 +- >> .../media/test-drivers/vivid/vivid-vbi-cap.c | 5 +- >> .../media/test-drivers/vivid/vivid-vbi-out.c | 5 +- >> .../media/test-drivers/vivid/vivid-vid-cap.c | 5 +- >> .../media/test-drivers/vivid/vivid-vid-out.c | 5 +- >> drivers/media/usb/airspy/airspy.c | 9 +- >> drivers/media/usb/cx231xx/cx231xx-417.c | 4 +- >> drivers/media/usb/cx231xx/cx231xx-video.c | 4 +- >> drivers/media/usb/hackrf/hackrf.c | 9 +- >> drivers/media/usb/usbtv/usbtv-video.c | 3 +- >> drivers/media/v4l2-core/v4l2-dev.c | 1 + >> drivers/media/v4l2-core/v4l2-ioctl.c | 21 +- >> drivers/media/v4l2-core/v4l2-mem2mem.c | 20 + >> .../staging/media/atomisp/pci/atomisp_ioctl.c | 4 +- >> drivers/staging/media/imx/imx-media-capture.c | 7 +- >> drivers/staging/media/meson/vdec/vdec.c | 13 +- >> .../staging/media/sunxi/cedrus/cedrus_h264.c | 8 +- >> .../staging/media/sunxi/cedrus/cedrus_h265.c | 9 +- >> include/media/v4l2-ioctl.h | 4 + >> include/media/v4l2-mem2mem.h | 12 + >> include/media/videobuf2-core.h | 65 +- >> include/media/videobuf2-v4l2.h | 13 + >> include/uapi/linux/videodev2.h | 24 +- >> samples/v4l/v4l2-pci-skeleton.c | 5 +- >> 70 files changed, 972 insertions(+), 507 deletions(-) >> create mode 100644 Documentation/userspace-api/media/v4l/vidioc-delete-bufs.rst >> >
Unlike when resolution change on keyframes, dynamic resolution change on inter frames doesn't allow to do a stream off/on sequence because it is need to keep all previous references alive to decode inter frames. This constraint have two main problems: - more memory consumption. - more buffers in use. To solve these issue this series introduce DELETE_BUFS ioctl and remove the 32 buffers limit per queue. VP9 conformance tests using fluster give a score of 210/305. The 20 resize inter tests (vp90-2-21-resize_inter_* files) are ok but require to use postprocessor. Kernel branch is available here: https://gitlab.collabora.com/benjamin.gaignard/for-upstream/-/commits/remove_vb2_queue_limit_v11 GStreamer branch to use DELETE_BUF ioctl and testing dynamic resolution change is here: https://gitlab.freedesktop.org/benjamin.gaignard1/gstreamer/-/commits/VP9_drc changes in version 11: - Patches ordering: 1 to 3: clean up 3 to 42: use vb2_get_buffer() and vb2_get_num_buffers() 43 to 46: allow to use more than 32 buffers per queue 47 to 50: allow verisilicon driver to do VP9 dynamic resolution change (which was the main purpose of this work) 51 to 56: prepare and introduce delete buffers feature. - Add a patch to rename 'off' to offset. - Add maintainers CC to drivers patches changes in version 10: - Make BUFFER_INDEX_MASK definition more readable - Rebase on media_stage/master branch and add a patch for nuvoton driver. - Fix issue on patch 13 changes in version 9: - BUFFER_INDEX_MASK now depends on PAGE_SHIFT value to match architectures requirements. - Correctly initialize max_num_buffers in vb2_core_queue_init() - run 'test-media -kmemleak mc' on top of the series and on patches 1 to 47 without failures. - fix compilation issue in patch 50 changes in version 8: - Add V4L2_BUF_CAP_SUPPORTS_SET_MAX_BUFS and new 'max_buffers' field in v4l2_create_buffers structure to report the maximum number of buffers that a queue could allocate. - Add V4L2_BUF_CAP_SUPPORTS_DELETE_BUFS to indicate that a queue support DELETE_BUFS ioctl. - Make some test drivers use more than 32 buffers and DELETE_BUFS ioctl. - Fix remarks done by Hans - Move "media: core: Rework how create_buf index returned value is computed" patch to the top of the serie. changes in version 7: - Use a bitmap to know which entries are valid in queue bufs array. The number of buffers in the queue could must calculated from the bitmap so num_buffers becomes useless. This led to add quite few patches to remove it from all the drivers. Note: despiste my attention I may have miss some calls to num_buffers... - Split patches to make them more readable. - Run v4l2-compliance with additional delete-bufs tests. - Run ./test-media -kmemleak vivid and no more failures. Note: I had to remove USERPTR streaming test because they to much frequentely hit get_framevec bug. It is not related to my series since this happens all the time on master branch. - Fix Hans remarks on v6 changes in version 6: - Get a patch per driver to use vb2_get_buffer() instead of directly access to queue buffers array. - Add lock in vb2_core_delete_buf() - Use vb2_buffer instead of index - Fix various comments - Change buffer index name to BUFFER_INDEX_MASK - Stop spamming kernel log with unbalanced counters Benjamin Gaignard (56): media: videobuf2: Rename offset parameter media: videobuf2: Rework offset 'cookie' encoding pattern media: videobuf2: Stop spamming kernel log with all queue counter media: videobuf2: Use vb2_buffer instead of index media: videobuf2: Access vb2_queue bufs array through helper functions media: videobuf2: Remove duplicated index vs q->num_buffers check media: videobuf2: Add helper to get queue number of buffers media: videobuf2: Use vb2_get_num_buffers() helper media: amphion: Use vb2_get_buffer() instead of directly access to buffers array media: amphion: Stop direct calls to queue num_buffers field media: mediatek: jpeg: Use vb2_get_buffer() instead of directly access to buffers array media: mediatek: vdec: Remove useless loop media: mediatek: vcodec: Stop direct calls to queue num_buffers field media: sti: hva: Use vb2_get_buffer() instead of directly access to buffers array media: visl: Use vb2_get_buffer() instead of directly access to buffers array media: atomisp: Use vb2_get_buffer() instead of directly access to buffers array media: atomisp: Stop direct calls to queue num_buffers field media: dvb-core: Use vb2_get_buffer() instead of directly access to buffers array media: dvb-core: Do not initialize twice queue num_buffer field media: dvb-frontends: rtl2832_srd: Use queue min_buffers_needed field media: video-i2c: Set min_buffers_needed to 2 media: pci: cx18: Set correct value to min_buffers_needed field media: pci: dt3155: Remove useless check media: pci: netup_unidvb: Remove useless number of buffers check media: pci: tw68: Stop direct calls to queue num_buffers field media: pci: tw686x: Set min_buffers_needed to 3 media: coda: Stop direct calls to queue num_buffers field media: nxp: Stop direct calls to queue num_buffers field media: renesas: Set min_buffers_needed to 16 media: ti: Use queue min_buffers_needed field to set the min number of buffers media: verisilicon: Stop direct calls to queue num_buffers field media: test-drivers: Stop direct calls to queue num_buffers field media: usb: airspy: Set min_buffers_needed to 8 media: usb: cx231xx: Set min_buffers_needed to CX231XX_MIN_BUF media: usb: hackrf: Set min_buffers_needed to 8 media: usb: usbtv: Set min_buffers_needed to 2 media: imx: Stop direct calls to queue num_buffers field media: meson: vdec: Stop direct calls to queue num_buffers field touchscreen: sur40: Stop direct calls to queue num_buffers field sample: v4l: Stop direct calls to queue num_buffers field media: cedrus: Stop direct calls to queue num_buffers field media: nuvoton: Stop direct calls to queue num_buffers field media: videobuf2: Be more flexible on the number of queue stored buffers media: core: Report the maximum possible number of buffers for the queue media: test-drivers: vivid: Increase max supported buffers for capture queues media: test-drivers: vicodec: Increase max supported capture queue buffers media: verisilicon: Refactor postprocessor to store more buffers media: verisilicon: Store chroma and motion vectors offset media: verisilicon: g2: Use common helpers to compute chroma and mv offsets media: verisilicon: vp9: Allow to change resolution while streaming media: core: Rework how create_buf index returned value is computed media: core: Add bitmap manage bufs array entries media: core: Free range of buffers media: v4l2: Add DELETE_BUFS ioctl media: v4l2: Add mem2mem helpers for DELETE_BUFS ioctl media: test-drivers: Use helper for DELETE_BUFS ioctl .../userspace-api/media/v4l/user-func.rst | 1 + .../media/v4l/vidioc-create-bufs.rst | 8 +- .../media/v4l/vidioc-delete-bufs.rst | 80 +++ .../media/v4l/vidioc-reqbufs.rst | 2 + drivers/input/touchscreen/sur40.c | 5 +- .../media/common/videobuf2/videobuf2-core.c | 567 +++++++++++------- .../media/common/videobuf2/videobuf2-v4l2.c | 116 +++- drivers/media/dvb-core/dvb_vb2.c | 17 +- drivers/media/dvb-frontends/rtl2832_sdr.c | 9 +- drivers/media/i2c/video-i2c.c | 5 +- drivers/media/pci/cx18/cx18-streams.c | 13 +- drivers/media/pci/dt3155/dt3155.c | 2 - .../pci/netup_unidvb/netup_unidvb_core.c | 4 +- drivers/media/pci/tw68/tw68-video.c | 6 +- drivers/media/pci/tw686x/tw686x-video.c | 13 +- drivers/media/platform/amphion/vpu_dbg.c | 30 +- drivers/media/platform/amphion/vpu_v4l2.c | 4 +- .../media/platform/chips-media/coda-common.c | 2 +- .../platform/mediatek/jpeg/mtk_jpeg_core.c | 7 +- .../vcodec/decoder/vdec/vdec_vp9_req_lat_if.c | 9 +- .../mediatek/vcodec/encoder/mtk_vcodec_enc.c | 2 +- drivers/media/platform/nuvoton/npcm-video.c | 2 +- drivers/media/platform/nxp/imx7-media-csi.c | 7 +- drivers/media/platform/renesas/rcar_drif.c | 8 +- drivers/media/platform/st/sti/hva/hva-v4l2.c | 9 +- .../media/platform/ti/am437x/am437x-vpfe.c | 7 +- drivers/media/platform/ti/cal/cal-video.c | 5 +- .../media/platform/ti/davinci/vpif_capture.c | 5 +- .../media/platform/ti/davinci/vpif_display.c | 5 +- drivers/media/platform/ti/omap/omap_vout.c | 5 +- drivers/media/platform/verisilicon/hantro.h | 9 +- .../media/platform/verisilicon/hantro_drv.c | 5 +- .../media/platform/verisilicon/hantro_g2.c | 14 + .../platform/verisilicon/hantro_g2_hevc_dec.c | 18 +- .../platform/verisilicon/hantro_g2_vp9_dec.c | 28 +- .../media/platform/verisilicon/hantro_hw.h | 7 +- .../platform/verisilicon/hantro_postproc.c | 93 ++- .../media/platform/verisilicon/hantro_v4l2.c | 27 +- .../media/test-drivers/vicodec/vicodec-core.c | 3 + drivers/media/test-drivers/vim2m.c | 2 + .../media/test-drivers/vimc/vimc-capture.c | 2 + drivers/media/test-drivers/visl/visl-dec.c | 32 +- drivers/media/test-drivers/visl/visl-video.c | 2 + drivers/media/test-drivers/vivid/vivid-core.c | 14 + .../media/test-drivers/vivid/vivid-meta-cap.c | 3 - .../media/test-drivers/vivid/vivid-meta-out.c | 5 +- .../test-drivers/vivid/vivid-touch-cap.c | 5 +- .../media/test-drivers/vivid/vivid-vbi-cap.c | 5 +- .../media/test-drivers/vivid/vivid-vbi-out.c | 5 +- .../media/test-drivers/vivid/vivid-vid-cap.c | 5 +- .../media/test-drivers/vivid/vivid-vid-out.c | 5 +- drivers/media/usb/airspy/airspy.c | 9 +- drivers/media/usb/cx231xx/cx231xx-417.c | 4 +- drivers/media/usb/cx231xx/cx231xx-video.c | 4 +- drivers/media/usb/hackrf/hackrf.c | 9 +- drivers/media/usb/usbtv/usbtv-video.c | 3 +- drivers/media/v4l2-core/v4l2-dev.c | 1 + drivers/media/v4l2-core/v4l2-ioctl.c | 21 +- drivers/media/v4l2-core/v4l2-mem2mem.c | 20 + .../staging/media/atomisp/pci/atomisp_ioctl.c | 4 +- drivers/staging/media/imx/imx-media-capture.c | 7 +- drivers/staging/media/meson/vdec/vdec.c | 13 +- .../staging/media/sunxi/cedrus/cedrus_h264.c | 8 +- .../staging/media/sunxi/cedrus/cedrus_h265.c | 9 +- include/media/v4l2-ioctl.h | 4 + include/media/v4l2-mem2mem.h | 12 + include/media/videobuf2-core.h | 65 +- include/media/videobuf2-v4l2.h | 13 + include/uapi/linux/videodev2.h | 24 +- samples/v4l/v4l2-pci-skeleton.c | 5 +- 70 files changed, 972 insertions(+), 507 deletions(-) create mode 100644 Documentation/userspace-api/media/v4l/vidioc-delete-bufs.rst