| Message ID | 20240531080707.34568-1-jacopo.mondi@ideasonboard.com |
|---|---|
| Headers | show |
| Series | media: raspberrypi: Add support for PiSP Back End | expand |
Hi Sakari, I presume the series is now ready to be collected. Do you want me to send a pull request or will you handle it ? Thanks j On Fri, May 31, 2024 at 10:06:59AM GMT, Jacopo Mondi wrote: > v8->v9: > - Remove reference to multiple contexts from the admin guide as suggested by > Nick > - Fix the compressed RAW format description as suggested by Nick > > v7->v8: > - Remove multiple-contexts and remove `struct pispbe_node_group` > - Address Sakari's style comments > - Remove CONFIG_PM dependency > > v6->v7: > - Introduce uAPI headers earlier in the series to document them > - kernel-doc uAPI types in pisp_be_config.h > - Link pisp_be_config.h kernel documentation in metafmt documentation > > v5->v6: > - minor updates > If no further comments, I think the series is ready to be collected (for > v6.11) > > v5->v6: > - Rebase on recent media_stage master branch > - Remove Y12 and Y14 formats as they have upstreamed already > - Squash in patch from Naush from > https://github.com/raspberrypi/linux/pull/6140 > > v4->v5: > - Address Sakari's style comments on the driver > - Add Naush's tags > > v3->v4: > - Rename the compressed RAW formats and change the page title > - Minor fixes to the RGB48 documentation > - Remove the clock name from bindings and driver > > v2->v3: > - Expand documentation of RGB48 formats > - Add back to the bindings the 'aclk' clock-names property > - Explicitly get the clock by name in the driver > - minor fixes > > v1->v2: > - Add Y12P and Y14P formats to yuv-luma.rst instead of documenting them > separately > - Fix typos in formats and documentation > - Adjust bindings as suggested during review > - Fix admin-guide with an up-to-media media graph (remove the HOG node) > - Add a patch to the driver to safely clean-up the video devices buffer queues > in case of errors > https://github.com/raspberrypi/linux/commit/9fcfb8ee070ecc2ca9b4fcf4629c4545f9cf178e > > Add support for the Raspberry Pi PiSP Back End memory-2-memory ISP. > Documentation available at: > https://datasheets.raspberrypi.com/camera/raspberry-pi-image-signal-processor-specification.pdf > > The PiSP Back End is the memory-2-memory ISP found on Raspberry Pi 5. In > conjunction with the PiSP Front End, for which a driver is expected to > hit mainline in the next weeks, it implements the Raspberry Pi 5 camera > system. > > The ISP is fully supported in the Raspberry Pi libcamera version and once > patches for the PiSP Front End will hit mainline the support will land in > mainline libcamera as well. > > Patch based on media-stage master branch. > > A branch is available at > > git://git.kernel.org/pub/scm/linux/kernel/git/jmondi/linux.git > #pispbe/media-staging/be-upstream-v8 > > -------------------- Hans' build scripts build summary ------------------------ > date: Tue May 28 16:25:12 CEST 2024 > media-tree git repo: git://git.kernel.org/pub/scm/linux/kernel/git/jmondi/linux.git > media-tree git branch: jmondi/pispbe/media-staging/be-upstream-v8 > media-tree git hash: 009fac2170dd037c036a95787175562bf5186e13 > v4l-utils git hash: 4a6a3725dd192759c2998311b00440b84c60df57 > edid-decode git hash: 5f723267e04deb3aa9610483514a02bcee10d9c2 > gcc version: i686-linux-gcc (GCC) 13.1.0 > ccache version: ccache version 4.7.5 > smatch/sparse repo: git://repo.or.cz/smatch.git > smatch version: v0.5.0-8639-gff1cc4d4 > sparse version: v0.5.0-8639-gff1cc4d4 > build-scripts repo: https://git.linuxtv.org/hverkuil/build-scripts.git > build-scripts git hash: 745fc7cf5ba1a1a841374c61e8470852232584c1 > host hardware: x86_64 > host os: 6.1.0-18-amd64 > > linux-git-arm: OK > linux-git-powerpc64: OK > linux-git-arm64: OK > linux-git-i686: OK > linux-git-x86_64: OK > no-acpi.config: OK > no-of.config: OK > no-pm.config: OK > no-pm-sleep.config: OK > no-debug-fs.config: OK > sparse: OK > smatch: WARNINGS: > > drivers/media/pci/ivtv/ivtv-driver.c:1296 ivtv_probe() warn: 'itv->dec_mem' from ioremap() not released on lines: 1296. > drivers/media/pci/ivtv/ivtv-driver.c:1296 ivtv_probe() warn: 'itv->enc_mem' from ioremap() not released on lines: 1296. > > COMPILE_TEST: WARNINGS: VIDEO_INTEL_IPU6 > strcpy/strncpy/strlcpy: OK > abi-compliance: ABI OK > pahole: ABI OK > spec-git: OK > kerneldoc: OK > > date: Tue May 28 17:31:58 CEST 2024 > ------------------------------------------------------------------------------- > > --------------------------- V4L2 compliance ----------------------------------- > v4l2-compliance 1.27.0-5208, 64 bits, 64-bit time_t > v4l2-compliance SHA: b13cb2cdedb2 2024-05-28 08:52:30 > > Compliance test for pispbe device /dev/video0: > Total for pispbe device /dev/video4: 48, Succeeded: 48, Failed: 0, Warnings: 0 > > Compliance test for pispbe device /dev/video1: > Total for pispbe device /dev/video4: 48, Succeeded: 48, Failed: 0, Warnings: 0 > > Compliance test for pispbe device /dev/video2: > Total for pispbe device /dev/video4: 48, Succeeded: 48, Failed: 0, Warnings: 0 > > Compliance test for pispbe device /dev/video3: > Total for pispbe device /dev/video4: 48, Succeeded: 48, Failed: 0, Warnings: 0 > > Compliance test for pispbe device /dev/video4: > Total for pispbe device /dev/video4: 48, Succeeded: 48, Failed: 0, Warnings: 0 > > Compliance test for pispbe device /dev/video5: > Total for pispbe device /dev/video0: 48, Succeeded: 48, Failed: 0, Warnings: 0 > > Compliance test for pispbe device /dev/video6: > Total for pispbe device /dev/video0: 48, Succeeded: 48, Failed: 0, Warnings: 0 > > Compliance test for pispbe device /dev/video7: > Total for pispbe device /dev/video0: 48, Succeeded: 48, Failed: 0, Warnings: 0 > ------------------------------------------------------------------------------- > > > Jacopo Mondi (7): > media: uapi: pixfmt-luma: Document MIPI CSI-2 packing > media: uapi: Add a pixel format for BGR48 and RGB48 > media: uapi: Add Raspberry Pi PiSP Back End uAPI > media: uapi: Add meta pixel format for PiSP BE config > media: uapi: Add PiSP Compressed RAW Bayer formats > media: dt-bindings: Add bindings for Raspberry Pi PiSP Back End > media: admin-guide: Document the Raspberry Pi PiSP BE > > Naushir Patuck (1): > media: raspberrypi: Add support for PiSP BE > > .../admin-guide/media/raspberrypi-pisp-be.dot | 20 + > .../admin-guide/media/raspberrypi-pisp-be.rst | 109 + > .../admin-guide/media/v4l-drivers.rst | 1 + > .../bindings/media/raspberrypi,pispbe.yaml | 63 + > .../userspace-api/media/v4l/meta-formats.rst | 1 + > .../media/v4l/metafmt-pisp-be.rst | 56 + > .../userspace-api/media/v4l/pixfmt-bayer.rst | 1 + > .../userspace-api/media/v4l/pixfmt-rgb.rst | 54 + > .../media/v4l/pixfmt-srggb8-pisp-comp.rst | 74 + > .../media/v4l/pixfmt-yuv-luma.rst | 4 + > MAINTAINERS | 9 + > drivers/media/platform/Kconfig | 1 + > drivers/media/platform/Makefile | 1 + > drivers/media/platform/raspberrypi/Kconfig | 5 + > drivers/media/platform/raspberrypi/Makefile | 3 + > .../platform/raspberrypi/pisp_be/Kconfig | 12 + > .../platform/raspberrypi/pisp_be/Makefile | 6 + > .../platform/raspberrypi/pisp_be/pisp_be.c | 1809 +++++++++++++++++ > .../raspberrypi/pisp_be/pisp_be_formats.h | 519 +++++ > drivers/media/v4l2-core/v4l2-common.c | 2 + > drivers/media/v4l2-core/v4l2-ioctl.c | 13 + > .../linux/media/raspberrypi/pisp_be_config.h | 927 +++++++++ > .../linux/media/raspberrypi/pisp_common.h | 199 ++ > include/uapi/linux/videodev2.h | 17 + > 24 files changed, 3906 insertions(+) > create mode 100644 Documentation/admin-guide/media/raspberrypi-pisp-be.dot > create mode 100644 Documentation/admin-guide/media/raspberrypi-pisp-be.rst > create mode 100644 Documentation/devicetree/bindings/media/raspberrypi,pispbe.yaml > create mode 100644 Documentation/userspace-api/media/v4l/metafmt-pisp-be.rst > create mode 100644 Documentation/userspace-api/media/v4l/pixfmt-srggb8-pisp-comp.rst > create mode 100644 drivers/media/platform/raspberrypi/Kconfig > create mode 100644 drivers/media/platform/raspberrypi/Makefile > create mode 100644 drivers/media/platform/raspberrypi/pisp_be/Kconfig > create mode 100644 drivers/media/platform/raspberrypi/pisp_be/Makefile > create mode 100644 drivers/media/platform/raspberrypi/pisp_be/pisp_be.c > create mode 100644 drivers/media/platform/raspberrypi/pisp_be/pisp_be_formats.h > create mode 100644 include/uapi/linux/media/raspberrypi/pisp_be_config.h > create mode 100644 include/uapi/linux/media/raspberrypi/pisp_common.h > > -- > 2.45.1 > >