mbox series

[v3,00/10] media: ov5645: Add support for streams

Message ID 20241018153230.235647-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Headers show
Series media: ov5645: Add support for streams | expand

Message

Lad, Prabhakar Oct. 18, 2024, 3:32 p.m. UTC
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Hi All,

This patch series aims to add the below features,
- Support subdev active state
- Support for streams
- Support for virtual channel
- Code cleanup

Note, these patches are dependent on below:
1] https://patchwork.kernel.org/project/linux-media/patch/20240416193319.778192-27-sakari.ailus@linux.intel.com/
2] https://patchwork.kernel.org/project/linux-media/patch/20240416193319.778192-26-sakari.ailus@linux.intel.com/

v2->v3
- Fixed review commments from Laurent
- Included RB tags from Laurent
- Dropped patch "media: i2c: ov5645: Enable runtime PM after v4l2_async_register_subdev()"
- Fixed checkpatch issues (ie used --max-line-length=80)

RFC->v2
- Dropped setting of VC using routes
- Defaulted the native format to MEDIA_BUS_FMT_SBGGR8_1X8
- Fixed ov5645_enum_frame_size and ov5645_enum_mbus_code
  for internal image pad

RFC patch,
Link: https://lore.kernel.org/all/20240904210719.52466-1-prabhakar.mahadev-lad.rj@bp.renesas.com/

Test logs:
====================================
root@smarc-rzg2l:~# media-ctl -p
......
- entity 4: ov5645 0-003c (2 pads, 1 link, 1 route)
      type V4L2 subdev subtype Sensor flags 0
      device node name /dev/v4l-subdev1
    routes:
        1/0 -> 0/0 [ACTIVE]
    pad0: SOURCE
        [stream:0 fmt:UYVY8_1X16/1280x960 field:none colorspace:srgb xfer:srgb ycbcr:601 quantization:lim-range
        crop:(0,0)/1280x960]
        -> "csi-10830400.csi2":0 [ENABLED,IMMUTABLE]
    pad1: SINK,0x8
        [stream:0 fmt:SBGGR8_1X8/2592x1944 field:none colorspace:srgb xfer:srgb ycbcr:601 quantization:lim-range
        crop:(0,0)/1280x960]
......

root@smarc-rzg2l:~# v4l2-ctl --device /dev/v4l-subdev1 --list-subdev-mbus-codes pad=0
ioctl: VIDIOC_SUBDEV_ENUM_MBUS_CODE (pad=0,stream=0)
    0x200f: MEDIA_BUS_FMT_UYVY8_1X16
root@smarc-rzg2l:~# v4l2-ctl --device /dev/v4l-subdev1 --list-subdev-mbus-codes pad=1
ioctl: VIDIOC_SUBDEV_ENUM_MBUS_CODE (pad=1,stream=0)
    0x3001: MEDIA_BUS_FMT_SBGGR8_1X8
root@smarc-rzg2l:~# v4l2-ctl --device /dev/v4l-subdev1 --list-subdev-framesizes pad=1,code=0x3001
ioctl: VIDIOC_SUBDEV_ENUM_FRAME_SIZE (pad=1,stream=0)
    Size Range: 2592x1944 - 2592x1944
root@smarc-rzg2l:~# v4l2-ctl --device /dev/v4l-subdev1 --list-subdev-framesizes pad=0,code=0x200f
ioctl: VIDIOC_SUBDEV_ENUM_FRAME_SIZE (pad=0,stream=0)
    Size Range: 1280x960 - 1280x960
    Size Range: 1920x1080 - 1920x1080
    Size Range: 2592x1944 - 2592x1944
root@smarc-rzg2l:~# v4l2-compliance -u /dev/v4l-subdev1
v4l2-compliance 1.28.1-5233, 64 bits, 64-bit time_t
v4l2-compliance SHA: fc15e229d9d3 2024-07-23 19:22:15

Compliance test for device /dev/v4l-subdev1:

Driver Info:
    Driver version  : 6.12.0
    Capabilities   : 0x00000002
        Streams Support
    Client Capabilities: 0x00000[ 2429.125325] ov5645 0-003c: ================= START STATUS =================
00000000003
streams int[ 2429.134589] ov5645 0-003c: ================== END STATUS ==================
erval-uses-which
Required ioctls:
    test VIDIOC_SUDBEV_QUERYCAP: OK
    test invalid ioctls: OK

Allow for multiple opens:
    test second /dev/v4l-subdev1 open: OK
    test VIDIOC_SUBDEV_QUERYCAP: OK
    test for unlimited opens: OK

Debug ioctls:
    test VIDIOC_LOG_STATUS: OK (Not Supported)

Input ioctls:
    test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
    test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
    test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
    test VIDIOC_ENUMAUDIO: OK (Not Supported)
    test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
    test VIDIOC_G/S_AUDIO: OK (Not Supported)
    Inputs: 0 Audio Inputs: 0 Tuners: 0

Output ioctls:
    test VIDIOC_G/S_MODULATOR: OK (Not Supported)
    test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
    test VIDIOC_ENUMAUDOUT: OK (Not Supported)
    test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
    test VIDIOC_G/S_AUDOUT: OK (Not Supported)
    Outputs: 0 Audio Outputs: 0 Modulators: 0

Input/Output configuration ioctls:
    test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
    test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
    test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
    test VIDIOC_G/S_EDID: OK (Not Supported)

Sub-Device routing ioctls:
    test Try VIDIOC_SUBDEV_G_ROUTING/VIDIOC_SUBDEV_S_ROUTING: OK
    test Active VIDIOC_SUBDEV_G_ROUTING/VIDIOC_SUBDEV_S_ROUTING: OK

Control ioctls:
    test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
    test VIDIOC_QUERYCTRL: OK
    test VIDIOC_G/S_CTRL: OK
    test VIDIOC_G/S/TRY_EXT_CTRLS: OK
    test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
    test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
    Standard Controls: 12 Private Controls: 0

Format ioctls:
    test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
    test VIDIOC_G/S_PARM: OK (Not Supported)
    test VIDIOC_G_FBUF: OK (Not Supported)
    test VIDIOC_G_FMT: OK (Not Supported)
    test VIDIOC_TRY_FMT: OK (Not Supported)
    test VIDIOC_S_FMT: OK (Not Supported)
    test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
    test Cropping: OK (Not Supported)
    test Composing: OK (Not Supported)
    test Scaling: OK (Not Supported)

Codec ioctls:
    test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
    test VIDIOC_G_ENC_INDEX: OK (Not Supported)
    test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)

Buffer ioctls:
    test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
    test CREATE_BUFS maximum buffers: OK
    test VIDIOC_REMOVE_BUFS: OK
    test VIDIOC_EXPBUF: OK (Not Supported)
    test Requests: OK (Not Supported)

Total for device /dev/v4l-subdev1: 47, Succeeded: 47, Failed: 0, Warnings: 0
------------------------------------------------------------

Lad Prabhakar (10):
  media: i2c: ov5645: Add V4L2_SUBDEV_FL_HAS_EVENTS and subscribe hooks
  media: i2c: ov5645: Use local `dev` pointer for subdev device
    assignment
  media: i2c: ov5645: Replace dev_err with dev_err_probe in probe
    function
  media: i2c: ov5645: Use v4l2_async_register_subdev_sensor()
  media: i2c: ov5645: Drop `power_lock` mutex
  media: i2c: ov5645: Use subdev active state
  media: i2c: ov5645: Switch to {enable,disable}_streams
  media: i2c: ov5645: Report streams using frame descriptors
  media: i2c: ov5645: Add internal image sink pad
  media: i2c: ov5645: Report internal routes to userspace

 drivers/media/i2c/ov5645.c | 435 +++++++++++++++++++++----------------
 1 file changed, 246 insertions(+), 189 deletions(-)

Comments

Lad, Prabhakar Nov. 4, 2024, 11:32 p.m. UTC | #1
Hi Sakari,

On Mon, Oct 21, 2024 at 9:06 AM Lad, Prabhakar
<prabhakar.csengg@gmail.com> wrote:
>
> Hi Laurent,
>
> On Sun, Oct 20, 2024 at 11:39 PM Laurent Pinchart
> <laurent.pinchart@ideasonboard.com> wrote:
> >
> > Hi Prabhakar,
> >
> > Thank you for the patches.
> >
> > I think patch 01/10 should be dropped in favour of
> > https://lore.kernel.org/r/20241020164354.GG7770@pendragon.ideasonboard.com
> > ("[PATCH v2] media: v4l2-subdev: Refactor events"). Patches 02/10 to
> > 08/10 seem ready, should we merge them without waiting for 09/10 and
> > 10/10 ?
> >
> Agreed, for patch 9/10 and 10/10 I'll give a nudge when the
> appropriate core patches have been merged in.
>
Gentle ping.

Cheers,
Prabhakar
Lad, Prabhakar Nov. 5, 2024, 11:23 a.m. UTC | #2
Hi Sakari,

On Tue, Nov 5, 2024 at 11:18 AM Sakari Ailus
<sakari.ailus@linux.intel.com> wrote:
>
> Hi Prabhakar,
>
> On Fri, Oct 18, 2024 at 04:32:20PM +0100, Prabhakar wrote:
> > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> >
> > Hi All,
> >
> > This patch series aims to add the below features,
> > - Support subdev active state
> > - Support for streams
> > - Support for virtual channel
> > - Code cleanup
>
> Thanks for these!
>
> I've taken patches 2--8, 1st is redundant with recent framework improvement
> and the last two need the metadata patches (and agreeing on the sensor
> interface). I've marked the two last as "changes requested", please repost
> once we have the new API agreed on.
>
Thank you.

Cheers,
Prabhakar