[v12,0/2] media: qcom: camss: Add sc7280 support

SC7280 is a Qualcomm SoC. This series adds support to bring up the CSIPHY,
CSID, VFE/RDI interfaces in SC7280.

SC7280 provides
- 3 x VFE, 3 RDI per VFE
- 2 x VFE Lite, 4 RDI per VFE
- 3 x CSID
- 2 x CSID Lite
- 5 x CSI PHY

We have tested this on qcs6490-rb3gen2-vision-mezzanine board having IMX577
sensor.

Used following tools for the sanity check of these changes.

- make CHECK_DTBS=y W=1 DT_SCHEMA_FILES=media/qcom,sc7280-camss.yaml
qcom/qcs6490-rb3gen2-vision-mezzanine.dtb
- make DT_CHECKER_FLAGS=-m W=1
DT_SCHEMA_FILES=media/qcom,sc7280-camss.yaml dt_binding_check
- make -j32 W=1
- ./scripts/checkpatch.pl
 
Changes in V12:
- droped mclk-pins{} and put the properties directly under the
  cam2-default-state and cam2-suspend-state node - Konrad.
- Link to v11:
  https://lore.kernel.org/linux-arm-msm/20250121125010.1853269-1-quic_vikramsa@quicinc.com/

Changes in V11:
- Moved [PATCH v10 1/4] and [PATCH v10 2/4] as a separate series.
- Marked dependency on
  https://lore.kernel.org/linux-arm-msm/20250121120901.1841142-1-quic_vikramsa@quicinc.com/
- Sorted the header files alphabetically in dtso.
- Removed invalid property for sensor.
- Removed rst-pin from default and suspend states of pinctrl. We have verified
  that for imx412 sensor there are no SET_SYSTEM_SLEEP_PM_OPS added.
  So removing rst-pin does not make any difference in power management. 
- Link to v10: https://lore.kernel.org/linux-arm-msm/20241217140656.965235-1-quic_vikramsa@quicinc.com/

Changes in V10:
- Updated cover letter to add link for v8 under changes in v9.
- No change in the patches w.r.t V9
- Link to v9: https://lore.kernel.org/linux-arm-msm/20241217133955.946426-1-quic_vikramsa@quicinc.com/

Changes in V9:
- Removed GCC_CAMERA_AHB_CLK as its always enabled.
- Added GCC_CAMERA_SF_AXI_CLK.
- Renamed gcc_cam_hf_axi to gcc_axi_hf.
- V8 had 5 patches and V9 have 4 patches.
- First 3 patches of V8 are already promoted to linux-next
i.e  
  media: dt-bindings: Add qcom,sc7280-camss
  media: qcom: camss: Sort camss version enums and compatible strings
  media: qcom: camss: Add support for camss driver on sc7280
- 2 new patches are added to handle new comments from Konrad on
  "Patch v8 4/5 arm64: dts: qcom: sc7280: Add support for camss" 
  1 of the 2 new patches make changes in yaml and other one is making
  change in camss driver to handle new comments in dtsi.
- for "Patch v8 4/5 arm64: dts: qcom: sc7280: Add support for camss" I got
  comments from Konrad to make changes for clock names so I had to make
  respective changes in "bindings/media/qcom,sc7280-camss.yaml". As dtsi
  changes are not merged yet, so there is no issues with backward
  compatibility and I am assuming this should be acceptable.
- Link to v8: https://lore.kernel.org/linux-arm-msm/20241206191900.2545069-1-quic_vikramsa@quicinc.com/
  
Changes in V8:
- Changed node name from camss to isp.
- Added QCOM_ICC_TAG_ACTIVE_ONLY and QCOM_ICC_TAG_ALWAYS tags for
  interconnects. 
- Added blank lines when required.
- Modified power-domain-names from horizontal to vertical list.
- Sorted pinctrl nodes based on gpio index.
- Link to v7: https://lore.kernel.org/linux-arm-msm/20241204100003.300123-1-quic_vikramsa@quicinc.com/

Changes in V7:
- Changed unit address for camss in documention and dts.
- Added avdd-supply and dvdd-supply for sensor.
- Changed reg/clocks/interrupts name for vfe_lite and csid_lite.
- Link to v6: https://lore.kernel.org/linux-arm-msm/20241127100421.3447601-1-quic_vikramsa@quicinc.com/

Changes in V6:
- Changed order of properties in Documentation [PATCH 1/5].
- Updated description for ports in Documentaion [PATCH 1/5].
- Moved regulators from csid to csiphy [PATCH 3/5].
- Link to v5: https://lore.kernel.org/linux-arm-msm/20241112173032.2740119-1-quic_vikramsa@quicinc.com/ 

Changes in V5:
- Updated Commit text for [PATCH v5 1/6].
- Moved reg after compatible string.
- Renamed csi'x' clocks to vfe'x'_csid
- Removed [PATCH v4 4/6] and raised a seprate series for this one.
- Moved gpio states to mezzanine dtso.
- Added more clock levels to address TPG related issues.
- Renamed power-domains-names -> power-domain-names. 
- Link to v4: https://lore.kernel.org/linux-arm-msm/20241030105347.2117034-1-quic_vikramsa@quicinc.com/ 

Changes in V4:
- V3 had 8 patches and V4 is reduced to 6.
- Removed [Patch v3 2/8] as binding change is not required for dtso.
- Removed [Patch v3 3/8] as the fix is already taken care in latest
  kernel tip. 
- Updated alignment for dtsi and dt-bindings.
- Adding qcs6490-rb3gen2-vision-mezzanine as overlay. 
- Link to v3: https://lore.kernel.org/linux-arm-msm/20241011140932.1744124-1-quic_vikramsa@quicinc.com/

Changes in V3:
- Added missed subject line for cover letter of V2.
- Updated Alignment, indentation and properties order.
- edit commit text for [PATCH 02/10] and [PATCH 03/10].
- Refactor camss_link_entities.
- Removed camcc enablement changes as it already done.
- Link to v2: https://lore.kernel.org/linux-arm-msm/20240904-camss_on_sc7280_rb3gen2_vision_v2_patches-v1-0-b18ddcd7d9df@quicinc.com/

Changes in V2:
- Improved indentation/formatting.
- Removed _src clocks and misleading code comments.
- Added name fields for power domains and csid register offset in DTSI.
- Dropped minItems field from YAML file.
- Listed changes in alphabetical order.
- Updated description and commit text to reflect changes
- Changed the compatible string from imx412 to imx577.
- Added board-specific enablement changes in the newly created vision
  board DTSI file.
- Fixed bug encountered during testing.
- Moved logically independent changes to a new/seprate patch.
- Removed cci0 as no sensor is on this port and MCLK2, which was a
  copy-paste error from the RB5 board reference.
- Added power rails, referencing the RB5 board.
- Discarded Patch 5/6 completely (not required).
- Removed unused enums.
- Link to v1: https://lore.kernel.org/linux-arm-msm/20240629-camss_first_post_linux_next-v1-0-bc798edabc3a@quicinc.com/

Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>

Vikram Sharma (2):
  arm64: dts: qcom: sc7280: Add support for camss
  arm64: dts: qcom: qcs6490-rb3gen2-vision-mezzanine: Add vision
    mezzanine

 arch/arm64/boot/dts/qcom/Makefile             |   4 +
 .../qcs6490-rb3gen2-vision-mezzanine.dtso     |  89 +++++++++
 arch/arm64/boot/dts/qcom/sc7280.dtsi          | 178 ++++++++++++++++++
 3 files changed, 271 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtso