| Message ID | 20211202034544.2750-14-yunfei.dong@mediatek.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v12,01/19] media: mtk-vcodec: Get numbers of register bases from DT | expand |
On Wed, Dec 1, 2021 at 7:46 PM Yunfei Dong <yunfei.dong@mediatek.com> wrote: > > Add work queue to process core hardware information. > First, get lat_buf from message queue, then call core > hardware of each codec(H264/VP9/AV1) to decode, finally > puts lat_buf back to the message. > > Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> > --- > .../platform/mtk-vcodec/mtk_vcodec_dec_drv.c | 16 +++++++- > .../platform/mtk-vcodec/mtk_vcodec_drv.h | 3 ++ > .../platform/mtk-vcodec/vdec_msg_queue.c | 41 ++++++++++++++++--- > .../platform/mtk-vcodec/vdec_msg_queue.h | 8 ++-- > 4 files changed, 57 insertions(+), 11 deletions(-) > > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c > index d460703f335d..4fbff61d2334 100644 > --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c > @@ -341,6 +341,17 @@ static int mtk_vcodec_probe(struct platform_device *pdev) > goto err_dec_pm; > } > > + if (IS_VDEC_LAT_ARCH(dev->vdec_pdata->hw_arch)) { > + vdec_msg_queue_init_ctx(&dev->msg_queue_core_ctx, MTK_VDEC_CORE); > + dev->core_workqueue = alloc_ordered_workqueue("core-decoder", > + WQ_MEM_RECLAIM | WQ_FREEZABLE); > + if (!dev->core_workqueue) { > + mtk_v4l2_err("Failed to create core workqueue"); > + ret = -EINVAL; > + goto err_res; > + } > + } > + > for (i = 0; i < MTK_VDEC_HW_MAX; i++) > mutex_init(&dev->dec_mutex[i]); > spin_lock_init(&dev->irqlock); > @@ -351,7 +362,7 @@ static int mtk_vcodec_probe(struct platform_device *pdev) > ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev); > if (ret) { > mtk_v4l2_err("v4l2_device_register err=%d", ret); > - goto err_res; > + goto err_core_workq; > } > > init_waitqueue_head(&dev->queue); > @@ -450,6 +461,9 @@ static int mtk_vcodec_probe(struct platform_device *pdev) > video_unregister_device(vfd_dec); > err_dec_alloc: > v4l2_device_unregister(&dev->v4l2_dev); > +err_core_workq: > + if (IS_VDEC_LAT_ARCH(dev->vdec_pdata->hw_arch)) > + destroy_workqueue(dev->core_workqueue); > err_res: > mtk_vcodec_release_dec_pm(&dev->pm); > err_dec_pm: > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h > index cbaed96dcfa2..a558cc16026d 100644 > --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h > @@ -27,6 +27,7 @@ > #define MTK_VCODEC_MAX_PLANES 3 > #define MTK_V4L2_BENCHMARK 0 > #define WAIT_INTR_TIMEOUT_MS 1000 > +#define IS_VDEC_LAT_ARCH(hw_arch) ((hw_arch) >= MTK_VDEC_LAT_SINGLE_CORE) Basic question: What is practical meaning of this? What architectures are supported? > > /* > * enum mtk_hw_reg_idx - MTK hw register base index > @@ -464,6 +465,7 @@ struct mtk_vcodec_enc_pdata { > * @dec_capability: used to identify decode capability, ex: 4k > * @enc_capability: used to identify encode capability > * > + * @core_workqueue: queue used for core hardware decode > * @msg_queue_core_ctx: msg queue context used for core workqueue > * > * @subdev_dev: subdev hardware device > @@ -506,6 +508,7 @@ struct mtk_vcodec_dev { > unsigned int dec_capability; > unsigned int enc_capability; > > + struct workqueue_struct *core_workqueue; > struct vdec_msg_queue_ctx msg_queue_core_ctx; > > void *subdev_dev[MTK_VDEC_HW_MAX]; > diff --git a/drivers/media/platform/mtk-vcodec/vdec_msg_queue.c b/drivers/media/platform/mtk-vcodec/vdec_msg_queue.c > index 913aefa67618..24f1d03df9f1 100644 > --- a/drivers/media/platform/mtk-vcodec/vdec_msg_queue.c > +++ b/drivers/media/platform/mtk-vcodec/vdec_msg_queue.c > @@ -68,6 +68,9 @@ int vdec_msg_queue_qbuf(struct vdec_msg_queue_ctx *msg_ctx, struct vdec_lat_buf > > if (msg_ctx->hardware_index != MTK_VDEC_CORE) > wake_up_all(&msg_ctx->ready_to_use); > + else > + queue_work(buf->ctx->dev->core_workqueue, > + &buf->ctx->msg_queue.core_work); need {} for else here? > > mtk_v4l2_debug(3, "enqueue buf type: %d addr: 0x%p num: %d", > msg_ctx->hardware_index, buf, msg_ctx->ready_num); > @@ -169,8 +172,7 @@ bool vdec_msg_queue_wait_lat_buf_full(struct vdec_msg_queue *msg_queue) > return false; > } > > -void vdec_msg_queue_deinit( > - struct vdec_msg_queue *msg_queue, > +void vdec_msg_queue_deinit(struct vdec_msg_queue *msg_queue, > struct mtk_vcodec_ctx *ctx) > { > struct vdec_lat_buf *lat_buf; > @@ -196,10 +198,36 @@ void vdec_msg_queue_deinit( > } > } > > -int vdec_msg_queue_init( > - struct vdec_msg_queue *msg_queue, > - struct mtk_vcodec_ctx *ctx, > - core_decode_cb_t core_decode, > +static void vdec_msg_queue_core_work(struct work_struct *work) > +{ > + struct vdec_msg_queue *msg_queue = > + container_of(work, struct vdec_msg_queue, core_work); > + struct mtk_vcodec_ctx *ctx = > + container_of(msg_queue, struct mtk_vcodec_ctx, msg_queue); > + struct mtk_vcodec_dev *dev = ctx->dev; > + struct vdec_lat_buf *lat_buf; > + > + lat_buf = vdec_msg_queue_dqbuf(&dev->msg_queue_core_ctx); > + if (!lat_buf) > + return; If we were to return in this error condition, isn't it better to also differentiate this error with return code and change void return type? > + > + ctx = lat_buf->ctx; > + mtk_vcodec_set_curr_ctx(dev, ctx, MTK_VDEC_CORE); > + > + lat_buf->core_decode(lat_buf); > + > + mtk_vcodec_set_curr_ctx(dev, NULL, MTK_VDEC_CORE); > + vdec_msg_queue_qbuf(&ctx->msg_queue.lat_ctx, lat_buf); > + > + if (!list_empty(&ctx->msg_queue.lat_ctx.ready_queue)) { > + mtk_v4l2_debug(3, "re-schedule to decode for core", > + dev->msg_queue_core_ctx.ready_num); > + queue_work(dev->core_workqueue, &msg_queue->core_work); > + } > +} > + > +int vdec_msg_queue_init(struct vdec_msg_queue *msg_queue, > + struct mtk_vcodec_ctx *ctx, core_decode_cb_t core_decode, > int private_size) > { > struct vdec_lat_buf *lat_buf; > @@ -210,6 +238,7 @@ int vdec_msg_queue_init( > return 0; > > vdec_msg_queue_init_ctx(&msg_queue->lat_ctx, MTK_VDEC_LAT0); > + INIT_WORK(&msg_queue->core_work, vdec_msg_queue_core_work); > msg_queue->wdma_addr.size = vde_msg_queue_get_trans_size( > ctx->picinfo.buf_w, ctx->picinfo.buf_h); > > diff --git a/drivers/media/platform/mtk-vcodec/vdec_msg_queue.h b/drivers/media/platform/mtk-vcodec/vdec_msg_queue.h > index 21a9c0aeb1b4..43eae638a2a8 100644 > --- a/drivers/media/platform/mtk-vcodec/vdec_msg_queue.h > +++ b/drivers/media/platform/mtk-vcodec/vdec_msg_queue.h > @@ -67,6 +67,7 @@ struct vdec_lat_buf { > * @wdma_addr: wdma address used for ube > * @wdma_rptr_addr: ube read point > * @wdma_wptr_addr: ube write point > + * @core_work: core hardware work > * @lat_ctx: used to store lat buffer list > */ > struct vdec_msg_queue { > @@ -76,6 +77,7 @@ struct vdec_msg_queue { > uint64_t wdma_rptr_addr; > uint64_t wdma_wptr_addr; > > + struct work_struct core_work; > struct vdec_msg_queue_ctx lat_ctx; > }; > > @@ -86,10 +88,8 @@ struct vdec_msg_queue { > * @core_decode: core decode callback for each codec > * @private_size: the private data size used to share with core > */ > -int vdec_msg_queue_init( > - struct vdec_msg_queue *msg_queue, > - struct mtk_vcodec_ctx *ctx, > - core_decode_cb_t core_decode, > +int vdec_msg_queue_init(struct vdec_msg_queue *msg_queue, > + struct mtk_vcodec_ctx *ctx, core_decode_cb_t core_decode, Not sure about the formatting rule, but is it supposed to be one param per line? If so, this comment also applied to function definition part. > int private_size); > > /** > -- > 2.25.1 >
Hi steve, Thanks for your suggestion. On Thu, 2021-12-09 at 15:44 -0800, Steve Cho wrote: > On Wed, Dec 1, 2021 at 7:46 PM Yunfei Dong <yunfei.dong@mediatek.com> > wrote: > > > > Add work queue to process core hardware information. > > First, get lat_buf from message queue, then call core > > hardware of each codec(H264/VP9/AV1) to decode, finally > > puts lat_buf back to the message. > > > > Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> > > --- > > .../platform/mtk-vcodec/mtk_vcodec_dec_drv.c | 16 +++++++- > > .../platform/mtk-vcodec/mtk_vcodec_drv.h | 3 ++ > > .../platform/mtk-vcodec/vdec_msg_queue.c | 41 > > ++++++++++++++++--- > > .../platform/mtk-vcodec/vdec_msg_queue.h | 8 ++-- > > 4 files changed, 57 insertions(+), 11 deletions(-) > > > > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c > > b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c > > index d460703f335d..4fbff61d2334 100644 > > --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c > > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c > > @@ -341,6 +341,17 @@ static int mtk_vcodec_probe(struct > > platform_device *pdev) > > goto err_dec_pm; > > } > > > > + if (IS_VDEC_LAT_ARCH(dev->vdec_pdata->hw_arch)) { > > + vdec_msg_queue_init_ctx(&dev->msg_queue_core_ctx, > > MTK_VDEC_CORE); > > + dev->core_workqueue = > > alloc_ordered_workqueue("core-decoder", > > + WQ_MEM_RECLAIM | WQ_FREEZABLE); > > + if (!dev->core_workqueue) { > > + mtk_v4l2_err("Failed to create core > > workqueue"); > > + ret = -EINVAL; > > + goto err_res; > > + } > > + } > > + > > for (i = 0; i < MTK_VDEC_HW_MAX; i++) > > mutex_init(&dev->dec_mutex[i]); > > spin_lock_init(&dev->irqlock); > > @@ -351,7 +362,7 @@ static int mtk_vcodec_probe(struct > > platform_device *pdev) > > ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev); > > if (ret) { > > mtk_v4l2_err("v4l2_device_register err=%d", ret); > > - goto err_res; > > + goto err_core_workq; > > } > > > > init_waitqueue_head(&dev->queue); > > @@ -450,6 +461,9 @@ static int mtk_vcodec_probe(struct > > platform_device *pdev) > > video_unregister_device(vfd_dec); > > err_dec_alloc: > > v4l2_device_unregister(&dev->v4l2_dev); > > +err_core_workq: > > + if (IS_VDEC_LAT_ARCH(dev->vdec_pdata->hw_arch)) > > + destroy_workqueue(dev->core_workqueue); > > err_res: > > mtk_vcodec_release_dec_pm(&dev->pm); > > err_dec_pm: > > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h > > b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h > > index cbaed96dcfa2..a558cc16026d 100644 > > --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h > > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h > > @@ -27,6 +27,7 @@ > > #define MTK_VCODEC_MAX_PLANES 3 > > #define MTK_V4L2_BENCHMARK 0 > > #define WAIT_INTR_TIMEOUT_MS 1000 > > +#define IS_VDEC_LAT_ARCH(hw_arch) ((hw_arch) >= > > MTK_VDEC_LAT_SINGLE_CORE) > > Basic question: What is practical meaning of this? What architectures > are supported? > This definition is used to separate different architectures. Pure single core/lat single core at current period is supported. > > > > /* > > * enum mtk_hw_reg_idx - MTK hw register base index > > @@ -464,6 +465,7 @@ struct mtk_vcodec_enc_pdata { > > * @dec_capability: used to identify decode capability, ex: 4k > > * @enc_capability: used to identify encode capability > > * > > + * @core_workqueue: queue used for core hardware decode > > * @msg_queue_core_ctx: msg queue context used for core workqueue > > * > > * @subdev_dev: subdev hardware device > > @@ -506,6 +508,7 @@ struct mtk_vcodec_dev { > > unsigned int dec_capability; > > unsigned int enc_capability; > > > > + struct workqueue_struct *core_workqueue; > > struct vdec_msg_queue_ctx msg_queue_core_ctx; > > > > void *subdev_dev[MTK_VDEC_HW_MAX]; > > diff --git a/drivers/media/platform/mtk-vcodec/vdec_msg_queue.c > > b/drivers/media/platform/mtk-vcodec/vdec_msg_queue.c > > index 913aefa67618..24f1d03df9f1 100644 > > --- a/drivers/media/platform/mtk-vcodec/vdec_msg_queue.c > > +++ b/drivers/media/platform/mtk-vcodec/vdec_msg_queue.c > > @@ -68,6 +68,9 @@ int vdec_msg_queue_qbuf(struct vdec_msg_queue_ctx > > *msg_ctx, struct vdec_lat_buf > > > > if (msg_ctx->hardware_index != MTK_VDEC_CORE) > > wake_up_all(&msg_ctx->ready_to_use); > > + else > > + queue_work(buf->ctx->dev->core_workqueue, > > + &buf->ctx->msg_queue.core_work); > > need {} for else here? > If condition not add "{}", else need not to add "{}" ? > > > > mtk_v4l2_debug(3, "enqueue buf type: %d addr: 0x%p num: > > %d", > > msg_ctx->hardware_index, buf, msg_ctx->ready_num); > > @@ -169,8 +172,7 @@ bool vdec_msg_queue_wait_lat_buf_full(struct > > vdec_msg_queue *msg_queue) > > return false; > > } > > > > -void vdec_msg_queue_deinit( > > - struct vdec_msg_queue *msg_queue, > > +void vdec_msg_queue_deinit(struct vdec_msg_queue *msg_queue, > > struct mtk_vcodec_ctx *ctx) > > { > > struct vdec_lat_buf *lat_buf; > > @@ -196,10 +198,36 @@ void vdec_msg_queue_deinit( > > } > > } > > > > -int vdec_msg_queue_init( > > - struct vdec_msg_queue *msg_queue, > > - struct mtk_vcodec_ctx *ctx, > > - core_decode_cb_t core_decode, > > +static void vdec_msg_queue_core_work(struct work_struct *work) > > +{ > > + struct vdec_msg_queue *msg_queue = > > + container_of(work, struct vdec_msg_queue, > > core_work); > > + struct mtk_vcodec_ctx *ctx = > > + container_of(msg_queue, struct mtk_vcodec_ctx, > > msg_queue); > > + struct mtk_vcodec_dev *dev = ctx->dev; > > + struct vdec_lat_buf *lat_buf; > > + > > + lat_buf = vdec_msg_queue_dqbuf(&dev->msg_queue_core_ctx); > > + if (!lat_buf) > > + return; > > If we were to return in this error condition, > isn't it better to also differentiate this error with return code and > change void return type? > vdec_msg_queue_core_work function is callback for param "func" in struct work_struct, need not to add return value. > > + > > + ctx = lat_buf->ctx; > > + mtk_vcodec_set_curr_ctx(dev, ctx, MTK_VDEC_CORE); > > + > > + lat_buf->core_decode(lat_buf); > > + > > + mtk_vcodec_set_curr_ctx(dev, NULL, MTK_VDEC_CORE); > > + vdec_msg_queue_qbuf(&ctx->msg_queue.lat_ctx, lat_buf); > > + > > + if (!list_empty(&ctx->msg_queue.lat_ctx.ready_queue)) { > > + mtk_v4l2_debug(3, "re-schedule to decode for core", > > + dev->msg_queue_core_ctx.ready_num); > > + queue_work(dev->core_workqueue, &msg_queue- > > >core_work); > > + } > > +} > > + > > +int vdec_msg_queue_init(struct vdec_msg_queue *msg_queue, > > + struct mtk_vcodec_ctx *ctx, core_decode_cb_t > > core_decode, > > int private_size) > > { > > struct vdec_lat_buf *lat_buf; > > @@ -210,6 +238,7 @@ int vdec_msg_queue_init( > > return 0; > > > > vdec_msg_queue_init_ctx(&msg_queue->lat_ctx, > > MTK_VDEC_LAT0); > > + INIT_WORK(&msg_queue->core_work, vdec_msg_queue_core_work); > > msg_queue->wdma_addr.size = vde_msg_queue_get_trans_size( > > ctx->picinfo.buf_w, ctx->picinfo.buf_h); > > > > diff --git a/drivers/media/platform/mtk-vcodec/vdec_msg_queue.h > > b/drivers/media/platform/mtk-vcodec/vdec_msg_queue.h > > index 21a9c0aeb1b4..43eae638a2a8 100644 > > --- a/drivers/media/platform/mtk-vcodec/vdec_msg_queue.h > > +++ b/drivers/media/platform/mtk-vcodec/vdec_msg_queue.h > > @@ -67,6 +67,7 @@ struct vdec_lat_buf { > > * @wdma_addr: wdma address used for ube > > * @wdma_rptr_addr: ube read point > > * @wdma_wptr_addr: ube write point > > + * @core_work: core hardware work > > * @lat_ctx: used to store lat buffer list > > */ > > struct vdec_msg_queue { > > @@ -76,6 +77,7 @@ struct vdec_msg_queue { > > uint64_t wdma_rptr_addr; > > uint64_t wdma_wptr_addr; > > > > + struct work_struct core_work; > > struct vdec_msg_queue_ctx lat_ctx; > > }; > > > > @@ -86,10 +88,8 @@ struct vdec_msg_queue { > > * @core_decode: core decode callback for each codec > > * @private_size: the private data size used to share with core > > */ > > -int vdec_msg_queue_init( > > - struct vdec_msg_queue *msg_queue, > > - struct mtk_vcodec_ctx *ctx, > > - core_decode_cb_t core_decode, > > +int vdec_msg_queue_init(struct vdec_msg_queue *msg_queue, > > + struct mtk_vcodec_ctx *ctx, core_decode_cb_t > > core_decode, > > Not sure about the formatting rule, but is it supposed to be one > param per line? > If so, this comment also applied to function definition part. > > > int private_size); > > I try to review other files, it looks that two or more parameters per line is ok. Whether you mean that we'd better to write one parameter per line? int vdec_msg_queue_init(struct vdec_msg_queue *msg_queue, struct mtk_vcodec_ctx *ctx, core_decode_cb_t Thanks, Yunfei Dong > > /** > > -- > > 2.25.1 > >
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c index d460703f335d..4fbff61d2334 100644 --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c @@ -341,6 +341,17 @@ static int mtk_vcodec_probe(struct platform_device *pdev) goto err_dec_pm; } + if (IS_VDEC_LAT_ARCH(dev->vdec_pdata->hw_arch)) { + vdec_msg_queue_init_ctx(&dev->msg_queue_core_ctx, MTK_VDEC_CORE); + dev->core_workqueue = alloc_ordered_workqueue("core-decoder", + WQ_MEM_RECLAIM | WQ_FREEZABLE); + if (!dev->core_workqueue) { + mtk_v4l2_err("Failed to create core workqueue"); + ret = -EINVAL; + goto err_res; + } + } + for (i = 0; i < MTK_VDEC_HW_MAX; i++) mutex_init(&dev->dec_mutex[i]); spin_lock_init(&dev->irqlock); @@ -351,7 +362,7 @@ static int mtk_vcodec_probe(struct platform_device *pdev) ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev); if (ret) { mtk_v4l2_err("v4l2_device_register err=%d", ret); - goto err_res; + goto err_core_workq; } init_waitqueue_head(&dev->queue); @@ -450,6 +461,9 @@ static int mtk_vcodec_probe(struct platform_device *pdev) video_unregister_device(vfd_dec); err_dec_alloc: v4l2_device_unregister(&dev->v4l2_dev); +err_core_workq: + if (IS_VDEC_LAT_ARCH(dev->vdec_pdata->hw_arch)) + destroy_workqueue(dev->core_workqueue); err_res: mtk_vcodec_release_dec_pm(&dev->pm); err_dec_pm: diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h index cbaed96dcfa2..a558cc16026d 100644 --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h @@ -27,6 +27,7 @@ #define MTK_VCODEC_MAX_PLANES 3 #define MTK_V4L2_BENCHMARK 0 #define WAIT_INTR_TIMEOUT_MS 1000 +#define IS_VDEC_LAT_ARCH(hw_arch) ((hw_arch) >= MTK_VDEC_LAT_SINGLE_CORE) /* * enum mtk_hw_reg_idx - MTK hw register base index @@ -464,6 +465,7 @@ struct mtk_vcodec_enc_pdata { * @dec_capability: used to identify decode capability, ex: 4k * @enc_capability: used to identify encode capability * + * @core_workqueue: queue used for core hardware decode * @msg_queue_core_ctx: msg queue context used for core workqueue * * @subdev_dev: subdev hardware device @@ -506,6 +508,7 @@ struct mtk_vcodec_dev { unsigned int dec_capability; unsigned int enc_capability; + struct workqueue_struct *core_workqueue; struct vdec_msg_queue_ctx msg_queue_core_ctx; void *subdev_dev[MTK_VDEC_HW_MAX]; diff --git a/drivers/media/platform/mtk-vcodec/vdec_msg_queue.c b/drivers/media/platform/mtk-vcodec/vdec_msg_queue.c index 913aefa67618..24f1d03df9f1 100644 --- a/drivers/media/platform/mtk-vcodec/vdec_msg_queue.c +++ b/drivers/media/platform/mtk-vcodec/vdec_msg_queue.c @@ -68,6 +68,9 @@ int vdec_msg_queue_qbuf(struct vdec_msg_queue_ctx *msg_ctx, struct vdec_lat_buf if (msg_ctx->hardware_index != MTK_VDEC_CORE) wake_up_all(&msg_ctx->ready_to_use); + else + queue_work(buf->ctx->dev->core_workqueue, + &buf->ctx->msg_queue.core_work); mtk_v4l2_debug(3, "enqueue buf type: %d addr: 0x%p num: %d", msg_ctx->hardware_index, buf, msg_ctx->ready_num); @@ -169,8 +172,7 @@ bool vdec_msg_queue_wait_lat_buf_full(struct vdec_msg_queue *msg_queue) return false; } -void vdec_msg_queue_deinit( - struct vdec_msg_queue *msg_queue, +void vdec_msg_queue_deinit(struct vdec_msg_queue *msg_queue, struct mtk_vcodec_ctx *ctx) { struct vdec_lat_buf *lat_buf; @@ -196,10 +198,36 @@ void vdec_msg_queue_deinit( } } -int vdec_msg_queue_init( - struct vdec_msg_queue *msg_queue, - struct mtk_vcodec_ctx *ctx, - core_decode_cb_t core_decode, +static void vdec_msg_queue_core_work(struct work_struct *work) +{ + struct vdec_msg_queue *msg_queue = + container_of(work, struct vdec_msg_queue, core_work); + struct mtk_vcodec_ctx *ctx = + container_of(msg_queue, struct mtk_vcodec_ctx, msg_queue); + struct mtk_vcodec_dev *dev = ctx->dev; + struct vdec_lat_buf *lat_buf; + + lat_buf = vdec_msg_queue_dqbuf(&dev->msg_queue_core_ctx); + if (!lat_buf) + return; + + ctx = lat_buf->ctx; + mtk_vcodec_set_curr_ctx(dev, ctx, MTK_VDEC_CORE); + + lat_buf->core_decode(lat_buf); + + mtk_vcodec_set_curr_ctx(dev, NULL, MTK_VDEC_CORE); + vdec_msg_queue_qbuf(&ctx->msg_queue.lat_ctx, lat_buf); + + if (!list_empty(&ctx->msg_queue.lat_ctx.ready_queue)) { + mtk_v4l2_debug(3, "re-schedule to decode for core", + dev->msg_queue_core_ctx.ready_num); + queue_work(dev->core_workqueue, &msg_queue->core_work); + } +} + +int vdec_msg_queue_init(struct vdec_msg_queue *msg_queue, + struct mtk_vcodec_ctx *ctx, core_decode_cb_t core_decode, int private_size) { struct vdec_lat_buf *lat_buf; @@ -210,6 +238,7 @@ int vdec_msg_queue_init( return 0; vdec_msg_queue_init_ctx(&msg_queue->lat_ctx, MTK_VDEC_LAT0); + INIT_WORK(&msg_queue->core_work, vdec_msg_queue_core_work); msg_queue->wdma_addr.size = vde_msg_queue_get_trans_size( ctx->picinfo.buf_w, ctx->picinfo.buf_h); diff --git a/drivers/media/platform/mtk-vcodec/vdec_msg_queue.h b/drivers/media/platform/mtk-vcodec/vdec_msg_queue.h index 21a9c0aeb1b4..43eae638a2a8 100644 --- a/drivers/media/platform/mtk-vcodec/vdec_msg_queue.h +++ b/drivers/media/platform/mtk-vcodec/vdec_msg_queue.h @@ -67,6 +67,7 @@ struct vdec_lat_buf { * @wdma_addr: wdma address used for ube * @wdma_rptr_addr: ube read point * @wdma_wptr_addr: ube write point + * @core_work: core hardware work * @lat_ctx: used to store lat buffer list */ struct vdec_msg_queue { @@ -76,6 +77,7 @@ struct vdec_msg_queue { uint64_t wdma_rptr_addr; uint64_t wdma_wptr_addr; + struct work_struct core_work; struct vdec_msg_queue_ctx lat_ctx; }; @@ -86,10 +88,8 @@ struct vdec_msg_queue { * @core_decode: core decode callback for each codec * @private_size: the private data size used to share with core */ -int vdec_msg_queue_init( - struct vdec_msg_queue *msg_queue, - struct mtk_vcodec_ctx *ctx, - core_decode_cb_t core_decode, +int vdec_msg_queue_init(struct vdec_msg_queue *msg_queue, + struct mtk_vcodec_ctx *ctx, core_decode_cb_t core_decode, int private_size); /**
Add work queue to process core hardware information. First, get lat_buf from message queue, then call core hardware of each codec(H264/VP9/AV1) to decode, finally puts lat_buf back to the message. Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> --- .../platform/mtk-vcodec/mtk_vcodec_dec_drv.c | 16 +++++++- .../platform/mtk-vcodec/mtk_vcodec_drv.h | 3 ++ .../platform/mtk-vcodec/vdec_msg_queue.c | 41 ++++++++++++++++--- .../platform/mtk-vcodec/vdec_msg_queue.h | 8 ++-- 4 files changed, 57 insertions(+), 11 deletions(-)