@@ -1442,11 +1442,43 @@ static int ov7251_check_hwcfg(struct ov7251 *ov7251)
return ret;
}
+static int ov7251_detect_chip(struct ov7251 *ov7251)
+{
+ u8 chip_id_high, chip_id_low, chip_rev;
+ int ret;
+
+ ret = ov7251_read_reg(ov7251, OV7251_CHIP_ID_HIGH, &chip_id_high);
+ if (ret < 0 || chip_id_high != OV7251_CHIP_ID_HIGH_BYTE)
+ return dev_err_probe(ov7251->dev, -ENODEV,
+ "could not read ID high\n");
+
+ ret = ov7251_read_reg(ov7251, OV7251_CHIP_ID_LOW, &chip_id_low);
+ if (ret < 0 || chip_id_low != OV7251_CHIP_ID_LOW_BYTE)
+ return dev_err_probe(ov7251->dev, -ENODEV,
+ "could not read ID low\n");
+
+ ret = ov7251_read_reg(ov7251, OV7251_SC_GP_IO_IN1, &chip_rev);
+ if (ret < 0)
+ return dev_err_probe(ov7251->dev, -ENODEV,
+ "could not read revision\n");
+ chip_rev >>= 4;
+
+ dev_info(ov7251->dev,
+ "OV7251 revision %x (%s) detected at address 0x%02x\n",
+ chip_rev,
+ chip_rev == 0x4 ? "1A / 1B" :
+ chip_rev == 0x5 ? "1C / 1D" :
+ chip_rev == 0x6 ? "1E" :
+ chip_rev == 0x7 ? "1F" : "unknown",
+ ov7251->i2c_client->addr);
+
+ return 0;
+}
+
static int ov7251_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
struct ov7251 *ov7251;
- u8 chip_id_high, chip_id_low, chip_rev;
unsigned int rate = 0;
s64 pixel_rate;
int ret;
@@ -1585,34 +1617,10 @@ static int ov7251_probe(struct i2c_client *client)
goto free_entity;
}
- ret = ov7251_read_reg(ov7251, OV7251_CHIP_ID_HIGH, &chip_id_high);
- if (ret < 0 || chip_id_high != OV7251_CHIP_ID_HIGH_BYTE) {
- dev_err(dev, "could not read ID high\n");
- ret = -ENODEV;
- goto power_down;
- }
- ret = ov7251_read_reg(ov7251, OV7251_CHIP_ID_LOW, &chip_id_low);
- if (ret < 0 || chip_id_low != OV7251_CHIP_ID_LOW_BYTE) {
- dev_err(dev, "could not read ID low\n");
- ret = -ENODEV;
- goto power_down;
- }
-
- ret = ov7251_read_reg(ov7251, OV7251_SC_GP_IO_IN1, &chip_rev);
- if (ret < 0) {
- dev_err(dev, "could not read revision\n");
- ret = -ENODEV;
+ ret = ov7251_detect_chip(ov7251);
+ if (ret)
goto power_down;
- }
- chip_rev >>= 4;
- dev_info(dev, "OV7251 revision %x (%s) detected at address 0x%02x\n",
- chip_rev,
- chip_rev == 0x4 ? "1A / 1B" :
- chip_rev == 0x5 ? "1C / 1D" :
- chip_rev == 0x6 ? "1E" :
- chip_rev == 0x7 ? "1F" : "unknown",
- client->addr);
ret = ov7251_read_reg(ov7251, OV7251_PRE_ISP_00,
&ov7251->pre_isp_00);
.probe() is quite busy for this driver; make it cleaner by moving the chip verification to a dedicated function. Signed-off-by: Daniel Scally <djrscally@gmail.com> --- Changes in v2: - None drivers/media/i2c/ov7251.c | 62 +++++++++++++++++++++----------------- 1 file changed, 35 insertions(+), 27 deletions(-)