diff --git a/Documentation/admin-guide/media/pci-cardlist.rst b/Documentation/admin-guide/media/pci-cardlist.rst
index aca13c7e8508..f0c90f42b713 100644
--- a/Documentation/admin-guide/media/pci-cardlist.rst
+++ b/Documentation/admin-guide/media/pci-cardlist.rst
@@ -69,14 +69,11 @@ dm1105            SDMC DM1105 based PCI cards
 dt3155            DT3155 frame grabber
 earth-pt1         PT1 cards
 earth-pt3         Earthsoft PT3 cards
-hexium_gemini     Hexium Gemini frame grabber
-hexium_orion      Hexium HV-PCI6 and Orion frame grabber
 hopper            HOPPER based cards
 ipu3-cio2         Intel ipu3-cio2 driver
 ivtv              Conexant cx23416/cx23415 MPEG encoder/decoder
 ivtvfb            Conexant cx23415 framebuffer
 mantis            MANTIS based cards
-mxb               Siemens-Nixdorf 'Multimedia eXtension Board'
 netup-unidvb      NetUP Universal DVB card
 ngene             Micronas nGene
 pluto2            Pluto2 cards
diff --git a/MAINTAINERS b/MAINTAINERS
index ba5254cd1002..485228b44f80 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -18377,13 +18377,6 @@ T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/driver-api/media/drivers/saa7134*
 F:	drivers/media/pci/saa7134/
 
-SAA7146 VIDEO4LINUX-2 DRIVER
-M:	Hans Verkuil <hverkuil@xs4all.nl>
-L:	linux-media@vger.kernel.org
-S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
-F:	drivers/staging/media/deprecated/saa7146/
-
 SAFESETID SECURITY MODULE
 M:	Micah Morton <mortonm@chromium.org>
 S:	Supported
diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig
index d71ee9a5d04b..2f2dbec4078d 100644
--- a/drivers/staging/media/Kconfig
+++ b/drivers/staging/media/Kconfig
@@ -52,7 +52,6 @@ menuconfig STAGING_MEDIA_DEPRECATED
 
 if STAGING_MEDIA_DEPRECATED
 source "drivers/staging/media/deprecated/atmel/Kconfig"
-source "drivers/staging/media/deprecated/saa7146/Kconfig"
 endif
 
 endif
diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile
index 1a01c1af3224..4ab1938bc26f 100644
--- a/drivers/staging/media/Makefile
+++ b/drivers/staging/media/Makefile
@@ -9,4 +9,3 @@ obj-$(CONFIG_VIDEO_ROCKCHIP_VDEC)	+= rkvdec/
 obj-$(CONFIG_VIDEO_SUNXI)	+= sunxi/
 obj-$(CONFIG_VIDEO_TEGRA)	+= tegra-video/
 obj-$(CONFIG_VIDEO_IPU3_IMGU)	+= ipu3/
-obj-y += deprecated/saa7146/
diff --git a/drivers/staging/media/deprecated/saa7146/Kconfig b/drivers/staging/media/deprecated/saa7146/Kconfig
deleted file mode 100644
index 3d2e2120788e..000000000000
--- a/drivers/staging/media/deprecated/saa7146/Kconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-source "drivers/staging/media/deprecated/saa7146/common/Kconfig"
-source "drivers/staging/media/deprecated/saa7146/saa7146/Kconfig"
diff --git a/drivers/staging/media/deprecated/saa7146/Makefile b/drivers/staging/media/deprecated/saa7146/Makefile
deleted file mode 100644
index 71866795174e..000000000000
--- a/drivers/staging/media/deprecated/saa7146/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
- # SPDX-License-Identifier: GPL-2.0-only
-obj-y += common/ saa7146/
diff --git a/drivers/staging/media/deprecated/saa7146/common/Kconfig b/drivers/staging/media/deprecated/saa7146/common/Kconfig
deleted file mode 100644
index a0aa155e5d85..000000000000
--- a/drivers/staging/media/deprecated/saa7146/common/Kconfig
+++ /dev/null
@@ -1,10 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-config VIDEO_SAA7146
-	tristate
-	depends on I2C && PCI
-
-config VIDEO_SAA7146_VV
-	tristate
-	depends on VIDEO_DEV
-	select VIDEOBUF_DMA_SG
-	select VIDEO_SAA7146
diff --git a/drivers/staging/media/deprecated/saa7146/common/Makefile b/drivers/staging/media/deprecated/saa7146/common/Makefile
deleted file mode 100644
index 2a6337feaec8..000000000000
--- a/drivers/staging/media/deprecated/saa7146/common/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-saa7146-objs    := saa7146_i2c.o saa7146_core.o
-saa7146_vv-objs := saa7146_fops.o saa7146_video.o saa7146_hlp.o saa7146_vbi.o
-
-obj-$(CONFIG_VIDEO_SAA7146) += saa7146.o
-obj-$(CONFIG_VIDEO_SAA7146_VV) += saa7146_vv.o
diff --git a/drivers/staging/media/deprecated/saa7146/common/saa7146.h b/drivers/staging/media/deprecated/saa7146/common/saa7146.h
deleted file mode 100644
index 71ce63c99cb4..000000000000
--- a/drivers/staging/media/deprecated/saa7146/common/saa7146.h
+++ /dev/null
@@ -1,472 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __SAA7146__
-#define __SAA7146__
-
-#include <linux/delay.h>	/* for delay-stuff */
-#include <linux/slab.h>		/* for kmalloc/kfree */
-#include <linux/pci.h>		/* for pci-config-stuff, vendor ids etc. */
-#include <linux/init.h>		/* for "__init" */
-#include <linux/interrupt.h>	/* for IMMEDIATE_BH */
-#include <linux/kmod.h>		/* for kernel module loader */
-#include <linux/i2c.h>		/* for i2c subsystem */
-#include <asm/io.h>		/* for accessing devices */
-#include <linux/stringify.h>
-#include <linux/mutex.h>
-#include <linux/scatterlist.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-ctrls.h>
-
-#include <linux/vmalloc.h>	/* for vmalloc() */
-#include <linux/mm.h>		/* for vmalloc_to_page() */
-
-#define saa7146_write(sxy,adr,dat)    writel((dat),(sxy->mem+(adr)))
-#define saa7146_read(sxy,adr)         readl(sxy->mem+(adr))
-
-extern unsigned int saa7146_debug;
-
-#ifndef DEBUG_VARIABLE
-	#define DEBUG_VARIABLE saa7146_debug
-#endif
-
-#define ERR(fmt, ...)	pr_err("%s: " fmt, __func__, ##__VA_ARGS__)
-
-#define _DBG(mask, fmt, ...)						\
-do {									\
-	if (DEBUG_VARIABLE & mask)					\
-		pr_debug("%s(): " fmt, __func__, ##__VA_ARGS__);	\
-} while (0)
-
-/* simple debug messages */
-#define DEB_S(fmt, ...)		_DBG(0x01, fmt, ##__VA_ARGS__)
-/* more detailed debug messages */
-#define DEB_D(fmt, ...)		_DBG(0x02, fmt, ##__VA_ARGS__)
-/* print enter and exit of functions */
-#define DEB_EE(fmt, ...)	_DBG(0x04, fmt, ##__VA_ARGS__)
-/* i2c debug messages */
-#define DEB_I2C(fmt, ...)	_DBG(0x08, fmt, ##__VA_ARGS__)
-/* vbi debug messages */
-#define DEB_VBI(fmt, ...)	_DBG(0x10, fmt, ##__VA_ARGS__)
-/* interrupt debug messages */
-#define DEB_INT(fmt, ...)	_DBG(0x20, fmt, ##__VA_ARGS__)
-/* capture debug messages */
-#define DEB_CAP(fmt, ...)	_DBG(0x40, fmt, ##__VA_ARGS__)
-
-#define SAA7146_ISR_CLEAR(x,y) \
-	saa7146_write(x, ISR, (y));
-
-struct module;
-
-struct saa7146_dev;
-struct saa7146_extension;
-struct saa7146_vv;
-
-/* saa7146 page table */
-struct saa7146_pgtable {
-	unsigned int	size;
-	__le32		*cpu;
-	dma_addr_t	dma;
-	/* used for offsets for u,v planes for planar capture modes */
-	unsigned long	offset;
-	/* used for custom pagetables (used for example by budget dvb cards) */
-	struct scatterlist *slist;
-	int		nents;
-};
-
-struct saa7146_pci_extension_data {
-	struct saa7146_extension *ext;
-	void *ext_priv;			/* most likely a name string */
-};
-
-#define MAKE_EXTENSION_PCI(x_var, x_vendor, x_device)		\
-	{							\
-		.vendor    = PCI_VENDOR_ID_PHILIPS,		\
-		.device	   = PCI_DEVICE_ID_PHILIPS_SAA7146,	\
-		.subvendor = x_vendor,				\
-		.subdevice = x_device,				\
-		.driver_data = (unsigned long)& x_var,		\
-	}
-
-struct saa7146_extension
-{
-	char	name[32];		/* name of the device */
-#define SAA7146_USE_I2C_IRQ	0x1
-#define SAA7146_I2C_SHORT_DELAY	0x2
-	int	flags;
-
-	/* pairs of subvendor and subdevice ids for
-	   supported devices, last entry 0xffff, 0xfff */
-	struct module *module;
-	struct pci_driver driver;
-	const struct pci_device_id *pci_tbl;
-
-	/* extension functions */
-	int (*probe)(struct saa7146_dev *);
-	int (*attach)(struct saa7146_dev *, struct saa7146_pci_extension_data *);
-	int (*detach)(struct saa7146_dev*);
-
-	u32	irq_mask;	/* mask to indicate, which irq-events are handled by the extension */
-	void	(*irq_func)(struct saa7146_dev*, u32* irq_mask);
-};
-
-struct saa7146_dma
-{
-	dma_addr_t	dma_handle;
-	__le32		*cpu_addr;
-};
-
-struct saa7146_dev
-{
-	struct module			*module;
-
-	struct v4l2_device		v4l2_dev;
-	struct v4l2_ctrl_handler	ctrl_handler;
-
-	/* different device locks */
-	spinlock_t			slock;
-	struct mutex			v4l2_lock;
-
-	unsigned char			__iomem *mem;		/* pointer to mapped IO memory */
-	u32				revision;	/* chip revision; needed for bug-workarounds*/
-
-	/* pci-device & irq stuff*/
-	char				name[32];
-	struct pci_dev			*pci;
-	u32				int_todo;
-	spinlock_t			int_slock;
-
-	/* extension handling */
-	struct saa7146_extension	*ext;		/* indicates if handled by extension */
-	void				*ext_priv;	/* pointer for extension private use (most likely some private data) */
-	struct saa7146_ext_vv		*ext_vv_data;
-
-	/* per device video/vbi information (if available) */
-	struct saa7146_vv	*vv_data;
-	void (*vv_callback)(struct saa7146_dev *dev, unsigned long status);
-
-	/* i2c-stuff */
-	struct mutex			i2c_lock;
-
-	u32				i2c_bitrate;
-	struct saa7146_dma		d_i2c;	/* pointer to i2c memory */
-	wait_queue_head_t		i2c_wq;
-	int				i2c_op;
-
-	/* memories */
-	struct saa7146_dma		d_rps0;
-	struct saa7146_dma		d_rps1;
-};
-
-static inline struct saa7146_dev *to_saa7146_dev(struct v4l2_device *v4l2_dev)
-{
-	return container_of(v4l2_dev, struct saa7146_dev, v4l2_dev);
-}
-
-/* from saa7146_i2c.c */
-int saa7146_i2c_adapter_prepare(struct saa7146_dev *dev, struct i2c_adapter *i2c_adapter, u32 bitrate);
-
-/* from saa7146_core.c */
-int saa7146_register_extension(struct saa7146_extension*);
-int saa7146_unregister_extension(struct saa7146_extension*);
-struct saa7146_format* saa7146_format_by_fourcc(struct saa7146_dev *dev, int fourcc);
-int saa7146_pgtable_alloc(struct pci_dev *pci, struct saa7146_pgtable *pt);
-void saa7146_pgtable_free(struct pci_dev *pci, struct saa7146_pgtable *pt);
-int saa7146_pgtable_build_single(struct pci_dev *pci, struct saa7146_pgtable *pt, struct scatterlist *list, int length );
-void *saa7146_vmalloc_build_pgtable(struct pci_dev *pci, long length, struct saa7146_pgtable *pt);
-void saa7146_vfree_destroy_pgtable(struct pci_dev *pci, void *mem, struct saa7146_pgtable *pt);
-void saa7146_setgpio(struct saa7146_dev *dev, int port, u32 data);
-int saa7146_wait_for_debi_done(struct saa7146_dev *dev, int nobusyloop);
-
-/* some memory sizes */
-#define SAA7146_I2C_MEM		( 1*PAGE_SIZE)
-#define SAA7146_RPS_MEM		( 1*PAGE_SIZE)
-
-/* some i2c constants */
-#define SAA7146_I2C_TIMEOUT	100	/* i2c-timeout-value in ms */
-#define SAA7146_I2C_RETRIES	3	/* how many times shall we retry an i2c-operation? */
-#define SAA7146_I2C_DELAY	5	/* time we wait after certain i2c-operations */
-
-/* unsorted defines */
-#define ME1    0x0000000800
-#define PV1    0x0000000008
-
-/* gpio defines */
-#define SAA7146_GPIO_INPUT 0x00
-#define SAA7146_GPIO_IRQHI 0x10
-#define SAA7146_GPIO_IRQLO 0x20
-#define SAA7146_GPIO_IRQHL 0x30
-#define SAA7146_GPIO_OUTLO 0x40
-#define SAA7146_GPIO_OUTHI 0x50
-
-/* debi defines */
-#define DEBINOSWAP 0x000e0000
-
-/* define for the register programming sequencer (rps) */
-#define CMD_NOP		0x00000000  /* No operation */
-#define CMD_CLR_EVENT	0x00000000  /* Clear event */
-#define CMD_SET_EVENT	0x10000000  /* Set signal event */
-#define CMD_PAUSE	0x20000000  /* Pause */
-#define CMD_CHECK_LATE	0x30000000  /* Check late */
-#define CMD_UPLOAD	0x40000000  /* Upload */
-#define CMD_STOP	0x50000000  /* Stop */
-#define CMD_INTERRUPT	0x60000000  /* Interrupt */
-#define CMD_JUMP	0x80000000  /* Jump */
-#define CMD_WR_REG	0x90000000  /* Write (load) register */
-#define CMD_RD_REG	0xa0000000  /* Read (store) register */
-#define CMD_WR_REG_MASK	0xc0000000  /* Write register with mask */
-
-#define CMD_OAN		MASK_27
-#define CMD_INV		MASK_26
-#define CMD_SIG4	MASK_25
-#define CMD_SIG3	MASK_24
-#define CMD_SIG2	MASK_23
-#define CMD_SIG1	MASK_22
-#define CMD_SIG0	MASK_21
-#define CMD_O_FID_B	MASK_14
-#define CMD_E_FID_B	MASK_13
-#define CMD_O_FID_A	MASK_12
-#define CMD_E_FID_A	MASK_11
-
-/* some events and command modifiers for rps1 squarewave generator */
-#define EVT_HS          (1<<15)     // Source Line Threshold reached
-#define EVT_VBI_B       (1<<9)      // VSYNC Event
-#define RPS_OAN         (1<<27)     // 1: OR events, 0: AND events
-#define RPS_INV         (1<<26)     // Invert (compound) event
-#define GPIO3_MSK       0xFF000000  // GPIO #3 control bits
-
-/* Bit mask constants */
-#define MASK_00   0x00000001    /* Mask value for bit 0 */
-#define MASK_01   0x00000002    /* Mask value for bit 1 */
-#define MASK_02   0x00000004    /* Mask value for bit 2 */
-#define MASK_03   0x00000008    /* Mask value for bit 3 */
-#define MASK_04   0x00000010    /* Mask value for bit 4 */
-#define MASK_05   0x00000020    /* Mask value for bit 5 */
-#define MASK_06   0x00000040    /* Mask value for bit 6 */
-#define MASK_07   0x00000080    /* Mask value for bit 7 */
-#define MASK_08   0x00000100    /* Mask value for bit 8 */
-#define MASK_09   0x00000200    /* Mask value for bit 9 */
-#define MASK_10   0x00000400    /* Mask value for bit 10 */
-#define MASK_11   0x00000800    /* Mask value for bit 11 */
-#define MASK_12   0x00001000    /* Mask value for bit 12 */
-#define MASK_13   0x00002000    /* Mask value for bit 13 */
-#define MASK_14   0x00004000    /* Mask value for bit 14 */
-#define MASK_15   0x00008000    /* Mask value for bit 15 */
-#define MASK_16   0x00010000    /* Mask value for bit 16 */
-#define MASK_17   0x00020000    /* Mask value for bit 17 */
-#define MASK_18   0x00040000    /* Mask value for bit 18 */
-#define MASK_19   0x00080000    /* Mask value for bit 19 */
-#define MASK_20   0x00100000    /* Mask value for bit 20 */
-#define MASK_21   0x00200000    /* Mask value for bit 21 */
-#define MASK_22   0x00400000    /* Mask value for bit 22 */
-#define MASK_23   0x00800000    /* Mask value for bit 23 */
-#define MASK_24   0x01000000    /* Mask value for bit 24 */
-#define MASK_25   0x02000000    /* Mask value for bit 25 */
-#define MASK_26   0x04000000    /* Mask value for bit 26 */
-#define MASK_27   0x08000000    /* Mask value for bit 27 */
-#define MASK_28   0x10000000    /* Mask value for bit 28 */
-#define MASK_29   0x20000000    /* Mask value for bit 29 */
-#define MASK_30   0x40000000    /* Mask value for bit 30 */
-#define MASK_31   0x80000000    /* Mask value for bit 31 */
-
-#define MASK_B0   0x000000ff    /* Mask value for byte 0 */
-#define MASK_B1   0x0000ff00    /* Mask value for byte 1 */
-#define MASK_B2   0x00ff0000    /* Mask value for byte 2 */
-#define MASK_B3   0xff000000    /* Mask value for byte 3 */
-
-#define MASK_W0   0x0000ffff    /* Mask value for word 0 */
-#define MASK_W1   0xffff0000    /* Mask value for word 1 */
-
-#define MASK_PA   0xfffffffc    /* Mask value for physical address */
-#define MASK_PR   0xfffffffe	/* Mask value for protection register */
-#define MASK_ER   0xffffffff    /* Mask value for the entire register */
-
-#define MASK_NONE 0x00000000    /* No mask */
-
-/* register aliases */
-#define BASE_ODD1         0x00  /* Video DMA 1 registers  */
-#define BASE_EVEN1        0x04
-#define PROT_ADDR1        0x08
-#define PITCH1            0x0C
-#define BASE_PAGE1        0x10  /* Video DMA 1 base page */
-#define NUM_LINE_BYTE1    0x14
-
-#define BASE_ODD2         0x18  /* Video DMA 2 registers */
-#define BASE_EVEN2        0x1C
-#define PROT_ADDR2        0x20
-#define PITCH2            0x24
-#define BASE_PAGE2        0x28  /* Video DMA 2 base page */
-#define NUM_LINE_BYTE2    0x2C
-
-#define BASE_ODD3         0x30  /* Video DMA 3 registers */
-#define BASE_EVEN3        0x34
-#define PROT_ADDR3        0x38
-#define PITCH3            0x3C
-#define BASE_PAGE3        0x40  /* Video DMA 3 base page */
-#define NUM_LINE_BYTE3    0x44
-
-#define PCI_BT_V1         0x48  /* Video/FIFO 1 */
-#define PCI_BT_V2         0x49  /* Video/FIFO 2 */
-#define PCI_BT_V3         0x4A  /* Video/FIFO 3 */
-#define PCI_BT_DEBI       0x4B  /* DEBI */
-#define PCI_BT_A          0x4C  /* Audio */
-
-#define DD1_INIT          0x50  /* Init setting of DD1 interface */
-
-#define DD1_STREAM_B      0x54  /* DD1 B video data stream handling */
-#define DD1_STREAM_A      0x56  /* DD1 A video data stream handling */
-
-#define BRS_CTRL          0x58  /* BRS control register */
-#define HPS_CTRL          0x5C  /* HPS control register */
-#define HPS_V_SCALE       0x60  /* HPS vertical scale */
-#define HPS_V_GAIN        0x64  /* HPS vertical ACL and gain */
-#define HPS_H_PRESCALE    0x68  /* HPS horizontal prescale   */
-#define HPS_H_SCALE       0x6C  /* HPS horizontal scale */
-#define BCS_CTRL          0x70  /* BCS control */
-#define CHROMA_KEY_RANGE  0x74
-#define CLIP_FORMAT_CTRL  0x78  /* HPS outputs formats & clipping */
-
-#define DEBI_CONFIG       0x7C
-#define DEBI_COMMAND      0x80
-#define DEBI_PAGE         0x84
-#define DEBI_AD           0x88
-
-#define I2C_TRANSFER      0x8C
-#define I2C_STATUS        0x90
-
-#define BASE_A1_IN        0x94	/* Audio 1 input DMA */
-#define PROT_A1_IN        0x98
-#define PAGE_A1_IN        0x9C
-
-#define BASE_A1_OUT       0xA0  /* Audio 1 output DMA */
-#define PROT_A1_OUT       0xA4
-#define PAGE_A1_OUT       0xA8
-
-#define BASE_A2_IN        0xAC  /* Audio 2 input DMA */
-#define PROT_A2_IN        0xB0
-#define PAGE_A2_IN        0xB4
-
-#define BASE_A2_OUT       0xB8  /* Audio 2 output DMA */
-#define PROT_A2_OUT       0xBC
-#define PAGE_A2_OUT       0xC0
-
-#define RPS_PAGE0         0xC4  /* RPS task 0 page register */
-#define RPS_PAGE1         0xC8  /* RPS task 1 page register */
-
-#define RPS_THRESH0       0xCC  /* HBI threshold for task 0 */
-#define RPS_THRESH1       0xD0  /* HBI threshold for task 1 */
-
-#define RPS_TOV0          0xD4  /* RPS timeout for task 0 */
-#define RPS_TOV1          0xD8  /* RPS timeout for task 1 */
-
-#define IER               0xDC  /* Interrupt enable register */
-
-#define GPIO_CTRL         0xE0  /* GPIO 0-3 register */
-
-#define EC1SSR            0xE4  /* Event cnt set 1 source select */
-#define EC2SSR            0xE8  /* Event cnt set 2 source select */
-#define ECT1R             0xEC  /* Event cnt set 1 thresholds */
-#define ECT2R             0xF0  /* Event cnt set 2 thresholds */
-
-#define ACON1             0xF4
-#define ACON2             0xF8
-
-#define MC1               0xFC   /* Main control register 1 */
-#define MC2               0x100  /* Main control register 2  */
-
-#define RPS_ADDR0         0x104  /* RPS task 0 address register */
-#define RPS_ADDR1         0x108  /* RPS task 1 address register */
-
-#define ISR               0x10C  /* Interrupt status register */
-#define PSR               0x110  /* Primary status register */
-#define SSR               0x114  /* Secondary status register */
-
-#define EC1R              0x118  /* Event counter set 1 register */
-#define EC2R              0x11C  /* Event counter set 2 register */
-
-#define PCI_VDP1          0x120  /* Video DMA pointer of FIFO 1 */
-#define PCI_VDP2          0x124  /* Video DMA pointer of FIFO 2 */
-#define PCI_VDP3          0x128  /* Video DMA pointer of FIFO 3 */
-#define PCI_ADP1          0x12C  /* Audio DMA pointer of audio out 1 */
-#define PCI_ADP2          0x130  /* Audio DMA pointer of audio in 1 */
-#define PCI_ADP3          0x134  /* Audio DMA pointer of audio out 2 */
-#define PCI_ADP4          0x138  /* Audio DMA pointer of audio in 2 */
-#define PCI_DMA_DDP       0x13C  /* DEBI DMA pointer */
-
-#define LEVEL_REP         0x140,
-#define A_TIME_SLOT1      0x180,  /* from 180 - 1BC */
-#define A_TIME_SLOT2      0x1C0,  /* from 1C0 - 1FC */
-
-/* isr masks */
-#define SPCI_PPEF       0x80000000  /* PCI parity error */
-#define SPCI_PABO       0x40000000  /* PCI access error (target or master abort) */
-#define SPCI_PPED       0x20000000  /* PCI parity error on 'real time data' */
-#define SPCI_RPS_I1     0x10000000  /* Interrupt issued by RPS1 */
-#define SPCI_RPS_I0     0x08000000  /* Interrupt issued by RPS0 */
-#define SPCI_RPS_LATE1  0x04000000  /* RPS task 1 is late */
-#define SPCI_RPS_LATE0  0x02000000  /* RPS task 0 is late */
-#define SPCI_RPS_E1     0x01000000  /* RPS error from task 1 */
-#define SPCI_RPS_E0     0x00800000  /* RPS error from task 0 */
-#define SPCI_RPS_TO1    0x00400000  /* RPS timeout task 1 */
-#define SPCI_RPS_TO0    0x00200000  /* RPS timeout task 0 */
-#define SPCI_UPLD       0x00100000  /* RPS in upload */
-#define SPCI_DEBI_S     0x00080000  /* DEBI status */
-#define SPCI_DEBI_E     0x00040000  /* DEBI error */
-#define SPCI_IIC_S      0x00020000  /* I2C status */
-#define SPCI_IIC_E      0x00010000  /* I2C error */
-#define SPCI_A2_IN      0x00008000  /* Audio 2 input DMA protection / limit */
-#define SPCI_A2_OUT     0x00004000  /* Audio 2 output DMA protection / limit */
-#define SPCI_A1_IN      0x00002000  /* Audio 1 input DMA protection / limit */
-#define SPCI_A1_OUT     0x00001000  /* Audio 1 output DMA protection / limit */
-#define SPCI_AFOU       0x00000800  /* Audio FIFO over- / underflow */
-#define SPCI_V_PE       0x00000400  /* Video protection address */
-#define SPCI_VFOU       0x00000200  /* Video FIFO over- / underflow */
-#define SPCI_FIDA       0x00000100  /* Field ID video port A */
-#define SPCI_FIDB       0x00000080  /* Field ID video port B */
-#define SPCI_PIN3       0x00000040  /* GPIO pin 3 */
-#define SPCI_PIN2       0x00000020  /* GPIO pin 2 */
-#define SPCI_PIN1       0x00000010  /* GPIO pin 1 */
-#define SPCI_PIN0       0x00000008  /* GPIO pin 0 */
-#define SPCI_ECS        0x00000004  /* Event counter 1, 2, 4, 5 */
-#define SPCI_EC3S       0x00000002  /* Event counter 3 */
-#define SPCI_EC0S       0x00000001  /* Event counter 0 */
-
-/* i2c */
-#define	SAA7146_I2C_ABORT	(1<<7)
-#define	SAA7146_I2C_SPERR	(1<<6)
-#define	SAA7146_I2C_APERR	(1<<5)
-#define	SAA7146_I2C_DTERR	(1<<4)
-#define	SAA7146_I2C_DRERR	(1<<3)
-#define	SAA7146_I2C_AL		(1<<2)
-#define	SAA7146_I2C_ERR		(1<<1)
-#define	SAA7146_I2C_BUSY	(1<<0)
-
-#define	SAA7146_I2C_START	(0x3)
-#define	SAA7146_I2C_CONT	(0x2)
-#define	SAA7146_I2C_STOP	(0x1)
-#define	SAA7146_I2C_NOP		(0x0)
-
-#define SAA7146_I2C_BUS_BIT_RATE_6400	(0x500)
-#define SAA7146_I2C_BUS_BIT_RATE_3200	(0x100)
-#define SAA7146_I2C_BUS_BIT_RATE_480	(0x400)
-#define SAA7146_I2C_BUS_BIT_RATE_320	(0x600)
-#define SAA7146_I2C_BUS_BIT_RATE_240	(0x700)
-#define SAA7146_I2C_BUS_BIT_RATE_120	(0x000)
-#define SAA7146_I2C_BUS_BIT_RATE_80	(0x200)
-#define SAA7146_I2C_BUS_BIT_RATE_60	(0x300)
-
-static inline void SAA7146_IER_DISABLE(struct saa7146_dev *x, unsigned y)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&x->int_slock, flags);
-	saa7146_write(x, IER, saa7146_read(x, IER) & ~y);
-	spin_unlock_irqrestore(&x->int_slock, flags);
-}
-
-static inline void SAA7146_IER_ENABLE(struct saa7146_dev *x, unsigned y)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&x->int_slock, flags);
-	saa7146_write(x, IER, saa7146_read(x, IER) | y);
-	spin_unlock_irqrestore(&x->int_slock, flags);
-}
-
-#endif
diff --git a/drivers/staging/media/deprecated/saa7146/common/saa7146_core.c b/drivers/staging/media/deprecated/saa7146/common/saa7146_core.c
deleted file mode 100644
index da21d346b870..000000000000
--- a/drivers/staging/media/deprecated/saa7146/common/saa7146_core.c
+++ /dev/null
@@ -1,578 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
-    saa7146.o - driver for generic saa7146-based hardware
-
-    Copyright (C) 1998-2003 Michael Hunold <michael@mihu.de>
-
-*/
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include "saa7146.h"
-
-static int saa7146_num;
-
-unsigned int saa7146_debug;
-
-module_param(saa7146_debug, uint, 0644);
-MODULE_PARM_DESC(saa7146_debug, "debug level (default: 0)");
-
-#if 0
-static void dump_registers(struct saa7146_dev* dev)
-{
-	int i = 0;
-
-	pr_info(" @ %li jiffies:\n", jiffies);
-	for (i = 0; i <= 0x148; i += 4)
-		pr_info("0x%03x: 0x%08x\n", i, saa7146_read(dev, i));
-}
-#endif
-
-/****************************************************************************
- * gpio and debi helper functions
- ****************************************************************************/
-
-void saa7146_setgpio(struct saa7146_dev *dev, int port, u32 data)
-{
-	u32 value = 0;
-
-	BUG_ON(port > 3);
-
-	value = saa7146_read(dev, GPIO_CTRL);
-	value &= ~(0xff << (8*port));
-	value |= (data << (8*port));
-	saa7146_write(dev, GPIO_CTRL, value);
-}
-
-/* This DEBI code is based on the saa7146 Stradis driver by Nathan Laredo */
-static inline int saa7146_wait_for_debi_done_sleep(struct saa7146_dev *dev,
-				unsigned long us1, unsigned long us2)
-{
-	unsigned long timeout;
-	int err;
-
-	/* wait for registers to be programmed */
-	timeout = jiffies + usecs_to_jiffies(us1);
-	while (1) {
-		err = time_after(jiffies, timeout);
-		if (saa7146_read(dev, MC2) & 2)
-			break;
-		if (err) {
-			pr_debug("%s: %s timed out while waiting for registers getting programmed\n",
-			       dev->name, __func__);
-			return -ETIMEDOUT;
-		}
-		msleep(1);
-	}
-
-	/* wait for transfer to complete */
-	timeout = jiffies + usecs_to_jiffies(us2);
-	while (1) {
-		err = time_after(jiffies, timeout);
-		if (!(saa7146_read(dev, PSR) & SPCI_DEBI_S))
-			break;
-		saa7146_read(dev, MC2);
-		if (err) {
-			DEB_S("%s: %s timed out while waiting for transfer completion\n",
-			      dev->name, __func__);
-			return -ETIMEDOUT;
-		}
-		msleep(1);
-	}
-
-	return 0;
-}
-
-static inline int saa7146_wait_for_debi_done_busyloop(struct saa7146_dev *dev,
-				unsigned long us1, unsigned long us2)
-{
-	unsigned long loops;
-
-	/* wait for registers to be programmed */
-	loops = us1;
-	while (1) {
-		if (saa7146_read(dev, MC2) & 2)
-			break;
-		if (!loops--) {
-			pr_err("%s: %s timed out while waiting for registers getting programmed\n",
-			       dev->name, __func__);
-			return -ETIMEDOUT;
-		}
-		udelay(1);
-	}
-
-	/* wait for transfer to complete */
-	loops = us2 / 5;
-	while (1) {
-		if (!(saa7146_read(dev, PSR) & SPCI_DEBI_S))
-			break;
-		saa7146_read(dev, MC2);
-		if (!loops--) {
-			DEB_S("%s: %s timed out while waiting for transfer completion\n",
-			      dev->name, __func__);
-			return -ETIMEDOUT;
-		}
-		udelay(5);
-	}
-
-	return 0;
-}
-
-int saa7146_wait_for_debi_done(struct saa7146_dev *dev, int nobusyloop)
-{
-	if (nobusyloop)
-		return saa7146_wait_for_debi_done_sleep(dev, 50000, 250000);
-	else
-		return saa7146_wait_for_debi_done_busyloop(dev, 50000, 250000);
-}
-
-/****************************************************************************
- * general helper functions
- ****************************************************************************/
-
-/* this is videobuf_vmalloc_to_sg() from videobuf-dma-sg.c
-   make sure virt has been allocated with vmalloc_32(), otherwise the BUG()
-   may be triggered on highmem machines */
-static struct scatterlist* vmalloc_to_sg(unsigned char *virt, int nr_pages)
-{
-	struct scatterlist *sglist;
-	struct page *pg;
-	int i;
-
-	sglist = kmalloc_array(nr_pages, sizeof(struct scatterlist), GFP_KERNEL);
-	if (NULL == sglist)
-		return NULL;
-	sg_init_table(sglist, nr_pages);
-	for (i = 0; i < nr_pages; i++, virt += PAGE_SIZE) {
-		pg = vmalloc_to_page(virt);
-		if (NULL == pg)
-			goto err;
-		BUG_ON(PageHighMem(pg));
-		sg_set_page(&sglist[i], pg, PAGE_SIZE, 0);
-	}
-	return sglist;
-
- err:
-	kfree(sglist);
-	return NULL;
-}
-
-/********************************************************************************/
-/* common page table functions */
-
-void *saa7146_vmalloc_build_pgtable(struct pci_dev *pci, long length, struct saa7146_pgtable *pt)
-{
-	int pages = (length+PAGE_SIZE-1)/PAGE_SIZE;
-	void *mem = vmalloc_32(length);
-	int slen = 0;
-
-	if (NULL == mem)
-		goto err_null;
-
-	if (!(pt->slist = vmalloc_to_sg(mem, pages)))
-		goto err_free_mem;
-
-	if (saa7146_pgtable_alloc(pci, pt))
-		goto err_free_slist;
-
-	pt->nents = pages;
-	slen = dma_map_sg(&pci->dev, pt->slist, pt->nents, DMA_FROM_DEVICE);
-	if (0 == slen)
-		goto err_free_pgtable;
-
-	if (0 != saa7146_pgtable_build_single(pci, pt, pt->slist, slen))
-		goto err_unmap_sg;
-
-	return mem;
-
-err_unmap_sg:
-	dma_unmap_sg(&pci->dev, pt->slist, pt->nents, DMA_FROM_DEVICE);
-err_free_pgtable:
-	saa7146_pgtable_free(pci, pt);
-err_free_slist:
-	kfree(pt->slist);
-	pt->slist = NULL;
-err_free_mem:
-	vfree(mem);
-err_null:
-	return NULL;
-}
-
-void saa7146_vfree_destroy_pgtable(struct pci_dev *pci, void *mem, struct saa7146_pgtable *pt)
-{
-	dma_unmap_sg(&pci->dev, pt->slist, pt->nents, DMA_FROM_DEVICE);
-	saa7146_pgtable_free(pci, pt);
-	kfree(pt->slist);
-	pt->slist = NULL;
-	vfree(mem);
-}
-
-void saa7146_pgtable_free(struct pci_dev *pci, struct saa7146_pgtable *pt)
-{
-	if (NULL == pt->cpu)
-		return;
-	dma_free_coherent(&pci->dev, pt->size, pt->cpu, pt->dma);
-	pt->cpu = NULL;
-}
-
-int saa7146_pgtable_alloc(struct pci_dev *pci, struct saa7146_pgtable *pt)
-{
-	__le32       *cpu;
-	dma_addr_t   dma_addr = 0;
-
-	cpu = dma_alloc_coherent(&pci->dev, PAGE_SIZE, &dma_addr, GFP_KERNEL);
-	if (NULL == cpu) {
-		return -ENOMEM;
-	}
-	pt->size = PAGE_SIZE;
-	pt->cpu  = cpu;
-	pt->dma  = dma_addr;
-
-	return 0;
-}
-
-int saa7146_pgtable_build_single(struct pci_dev *pci, struct saa7146_pgtable *pt,
-	struct scatterlist *list, int sglen  )
-{
-	__le32 *ptr, fill;
-	int nr_pages = 0;
-	int i,p;
-
-	BUG_ON(0 == sglen);
-	BUG_ON(list->offset > PAGE_SIZE);
-
-	/* if we have a user buffer, the first page may not be
-	   aligned to a page boundary. */
-	pt->offset = list->offset;
-
-	ptr = pt->cpu;
-	for (i = 0; i < sglen; i++, list++) {
-/*
-		pr_debug("i:%d, adr:0x%08x, len:%d, offset:%d\n",
-			 i, sg_dma_address(list), sg_dma_len(list),
-			 list->offset);
-*/
-		for (p = 0; p * 4096 < sg_dma_len(list); p++, ptr++) {
-			*ptr = cpu_to_le32(sg_dma_address(list) + p * 4096);
-			nr_pages++;
-		}
-	}
-
-
-	/* safety; fill the page table up with the last valid page */
-	fill = *(ptr-1);
-	for(i=nr_pages;i<1024;i++) {
-		*ptr++ = fill;
-	}
-
-/*
-	ptr = pt->cpu;
-	pr_debug("offset: %d\n", pt->offset);
-	for(i=0;i<5;i++) {
-		pr_debug("ptr1 %d: 0x%08x\n", i, ptr[i]);
-	}
-*/
-	return 0;
-}
-
-/********************************************************************************/
-/* interrupt handler */
-static irqreturn_t interrupt_hw(int irq, void *dev_id)
-{
-	struct saa7146_dev *dev = dev_id;
-	u32 isr;
-	u32 ack_isr;
-
-	/* read out the interrupt status register */
-	ack_isr = isr = saa7146_read(dev, ISR);
-
-	/* is this our interrupt? */
-	if ( 0 == isr ) {
-		/* nope, some other device */
-		return IRQ_NONE;
-	}
-
-	if (dev->ext) {
-		if (dev->ext->irq_mask & isr) {
-			if (dev->ext->irq_func)
-				dev->ext->irq_func(dev, &isr);
-			isr &= ~dev->ext->irq_mask;
-		}
-	}
-	if (0 != (isr & (MASK_27))) {
-		DEB_INT("irq: RPS0 (0x%08x)\n", isr);
-		if (dev->vv_data && dev->vv_callback)
-			dev->vv_callback(dev,isr);
-		isr &= ~MASK_27;
-	}
-	if (0 != (isr & (MASK_28))) {
-		if (dev->vv_data && dev->vv_callback)
-			dev->vv_callback(dev,isr);
-		isr &= ~MASK_28;
-	}
-	if (0 != (isr & (MASK_16|MASK_17))) {
-		SAA7146_IER_DISABLE(dev, MASK_16|MASK_17);
-		/* only wake up if we expect something */
-		if (0 != dev->i2c_op) {
-			dev->i2c_op = 0;
-			wake_up(&dev->i2c_wq);
-		} else {
-			u32 psr = saa7146_read(dev, PSR);
-			u32 ssr = saa7146_read(dev, SSR);
-			pr_warn("%s: unexpected i2c irq: isr %08x psr %08x ssr %08x\n",
-				dev->name, isr, psr, ssr);
-		}
-		isr &= ~(MASK_16|MASK_17);
-	}
-	if( 0 != isr ) {
-		ERR("warning: interrupt enabled, but not handled properly.(0x%08x)\n",
-		    isr);
-		ERR("disabling interrupt source(s)!\n");
-		SAA7146_IER_DISABLE(dev,isr);
-	}
-	saa7146_write(dev, ISR, ack_isr);
-	return IRQ_HANDLED;
-}
-
-/*********************************************************************************/
-/* configuration-functions                                                       */
-
-static int saa7146_init_one(struct pci_dev *pci, const struct pci_device_id *ent)
-{
-	struct saa7146_pci_extension_data *pci_ext = (struct saa7146_pci_extension_data *)ent->driver_data;
-	struct saa7146_extension *ext = pci_ext->ext;
-	struct saa7146_dev *dev;
-	int err = -ENOMEM;
-
-	/* clear out mem for sure */
-	dev = kzalloc(sizeof(struct saa7146_dev), GFP_KERNEL);
-	if (!dev) {
-		ERR("out of memory\n");
-		goto out;
-	}
-
-	/* create a nice device name */
-	sprintf(dev->name, "saa7146 (%d)", saa7146_num);
-
-	DEB_EE("pci:%p\n", pci);
-
-	err = pci_enable_device(pci);
-	if (err < 0) {
-		ERR("pci_enable_device() failed\n");
-		goto err_free;
-	}
-
-	/* enable bus-mastering */
-	pci_set_master(pci);
-
-	dev->pci = pci;
-
-	/* get chip-revision; this is needed to enable bug-fixes */
-	dev->revision = pci->revision;
-
-	/* remap the memory from virtual to physical address */
-
-	err = pci_request_region(pci, 0, "saa7146");
-	if (err < 0)
-		goto err_disable;
-
-	dev->mem = ioremap(pci_resource_start(pci, 0),
-			   pci_resource_len(pci, 0));
-	if (!dev->mem) {
-		ERR("ioremap() failed\n");
-		err = -ENODEV;
-		goto err_release;
-	}
-
-	/* we don't do a master reset here anymore, it screws up
-	   some boards that don't have an i2c-eeprom for configuration
-	   values */
-/*
-	saa7146_write(dev, MC1, MASK_31);
-*/
-
-	/* disable all irqs */
-	saa7146_write(dev, IER, 0);
-
-	/* shut down all dma transfers and rps tasks */
-	saa7146_write(dev, MC1, 0x30ff0000);
-
-	/* clear out any rps-signals pending */
-	saa7146_write(dev, MC2, 0xf8000000);
-
-	/* request an interrupt for the saa7146 */
-	err = request_irq(pci->irq, interrupt_hw, IRQF_SHARED,
-			  dev->name, dev);
-	if (err < 0) {
-		ERR("request_irq() failed\n");
-		goto err_unmap;
-	}
-
-	err = -ENOMEM;
-
-	/* get memory for various stuff */
-	dev->d_rps0.cpu_addr = dma_alloc_coherent(&pci->dev, SAA7146_RPS_MEM,
-						  &dev->d_rps0.dma_handle,
-						  GFP_KERNEL);
-	if (!dev->d_rps0.cpu_addr)
-		goto err_free_irq;
-
-	dev->d_rps1.cpu_addr = dma_alloc_coherent(&pci->dev, SAA7146_RPS_MEM,
-						  &dev->d_rps1.dma_handle,
-						  GFP_KERNEL);
-	if (!dev->d_rps1.cpu_addr)
-		goto err_free_rps0;
-
-	dev->d_i2c.cpu_addr = dma_alloc_coherent(&pci->dev, SAA7146_RPS_MEM,
-						 &dev->d_i2c.dma_handle, GFP_KERNEL);
-	if (!dev->d_i2c.cpu_addr)
-		goto err_free_rps1;
-
-	/* the rest + print status message */
-
-	pr_info("found saa7146 @ mem %p (revision %d, irq %d) (0x%04x,0x%04x)\n",
-		dev->mem, dev->revision, pci->irq,
-		pci->subsystem_vendor, pci->subsystem_device);
-	dev->ext = ext;
-
-	mutex_init(&dev->v4l2_lock);
-	spin_lock_init(&dev->int_slock);
-	spin_lock_init(&dev->slock);
-
-	mutex_init(&dev->i2c_lock);
-
-	dev->module = THIS_MODULE;
-	init_waitqueue_head(&dev->i2c_wq);
-
-	/* set some sane pci arbitrition values */
-	saa7146_write(dev, PCI_BT_V1, 0x1c00101f);
-
-	/* TODO: use the status code of the callback */
-
-	err = -ENODEV;
-
-	if (ext->probe && ext->probe(dev)) {
-		DEB_D("ext->probe() failed for %p. skipping device.\n", dev);
-		goto err_free_i2c;
-	}
-
-	if (ext->attach(dev, pci_ext)) {
-		DEB_D("ext->attach() failed for %p. skipping device.\n", dev);
-		goto err_free_i2c;
-	}
-	/* V4L extensions will set the pci drvdata to the v4l2_device in the
-	   attach() above. So for those cards that do not use V4L we have to
-	   set it explicitly. */
-	pci_set_drvdata(pci, &dev->v4l2_dev);
-
-	saa7146_num++;
-
-	err = 0;
-out:
-	return err;
-
-err_free_i2c:
-	dma_free_coherent(&pci->dev, SAA7146_RPS_MEM, dev->d_i2c.cpu_addr,
-			  dev->d_i2c.dma_handle);
-err_free_rps1:
-	dma_free_coherent(&pci->dev, SAA7146_RPS_MEM, dev->d_rps1.cpu_addr,
-			  dev->d_rps1.dma_handle);
-err_free_rps0:
-	dma_free_coherent(&pci->dev, SAA7146_RPS_MEM, dev->d_rps0.cpu_addr,
-			  dev->d_rps0.dma_handle);
-err_free_irq:
-	free_irq(pci->irq, (void *)dev);
-err_unmap:
-	iounmap(dev->mem);
-err_release:
-	pci_release_region(pci, 0);
-err_disable:
-	pci_disable_device(pci);
-err_free:
-	kfree(dev);
-	goto out;
-}
-
-static void saa7146_remove_one(struct pci_dev *pdev)
-{
-	struct v4l2_device *v4l2_dev = pci_get_drvdata(pdev);
-	struct saa7146_dev *dev = to_saa7146_dev(v4l2_dev);
-	struct {
-		void *addr;
-		dma_addr_t dma;
-	} dev_map[] = {
-		{ dev->d_i2c.cpu_addr, dev->d_i2c.dma_handle },
-		{ dev->d_rps1.cpu_addr, dev->d_rps1.dma_handle },
-		{ dev->d_rps0.cpu_addr, dev->d_rps0.dma_handle },
-		{ NULL, 0 }
-	}, *p;
-
-	DEB_EE("dev:%p\n", dev);
-
-	dev->ext->detach(dev);
-
-	/* shut down all video dma transfers */
-	saa7146_write(dev, MC1, 0x00ff0000);
-
-	/* disable all irqs, release irq-routine */
-	saa7146_write(dev, IER, 0);
-
-	free_irq(pdev->irq, dev);
-
-	for (p = dev_map; p->addr; p++)
-		dma_free_coherent(&pdev->dev, SAA7146_RPS_MEM, p->addr,
-				  p->dma);
-
-	iounmap(dev->mem);
-	pci_release_region(pdev, 0);
-	pci_disable_device(pdev);
-	kfree(dev);
-
-	saa7146_num--;
-}
-
-/*********************************************************************************/
-/* extension handling functions                                                  */
-
-int saa7146_register_extension(struct saa7146_extension* ext)
-{
-	DEB_EE("ext:%p\n", ext);
-
-	ext->driver.name = ext->name;
-	ext->driver.id_table = ext->pci_tbl;
-	ext->driver.probe = saa7146_init_one;
-	ext->driver.remove = saa7146_remove_one;
-
-	pr_info("register extension '%s'\n", ext->name);
-	return pci_register_driver(&ext->driver);
-}
-
-int saa7146_unregister_extension(struct saa7146_extension* ext)
-{
-	DEB_EE("ext:%p\n", ext);
-	pr_info("unregister extension '%s'\n", ext->name);
-	pci_unregister_driver(&ext->driver);
-	return 0;
-}
-
-EXPORT_SYMBOL_GPL(saa7146_register_extension);
-EXPORT_SYMBOL_GPL(saa7146_unregister_extension);
-
-/* misc functions used by extension modules */
-EXPORT_SYMBOL_GPL(saa7146_pgtable_alloc);
-EXPORT_SYMBOL_GPL(saa7146_pgtable_free);
-EXPORT_SYMBOL_GPL(saa7146_pgtable_build_single);
-EXPORT_SYMBOL_GPL(saa7146_vmalloc_build_pgtable);
-EXPORT_SYMBOL_GPL(saa7146_vfree_destroy_pgtable);
-EXPORT_SYMBOL_GPL(saa7146_wait_for_debi_done);
-
-EXPORT_SYMBOL_GPL(saa7146_setgpio);
-
-EXPORT_SYMBOL_GPL(saa7146_i2c_adapter_prepare);
-
-EXPORT_SYMBOL_GPL(saa7146_debug);
-
-MODULE_AUTHOR("Michael Hunold <michael@mihu.de>");
-MODULE_DESCRIPTION("driver for generic saa7146-based hardware");
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/media/deprecated/saa7146/common/saa7146_fops.c b/drivers/staging/media/deprecated/saa7146/common/saa7146_fops.c
deleted file mode 100644
index aa14698a9c54..000000000000
--- a/drivers/staging/media/deprecated/saa7146/common/saa7146_fops.c
+++ /dev/null
@@ -1,658 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include "saa7146_vv.h"
-
-/****************************************************************************/
-/* resource management functions, shamelessly stolen from saa7134 driver */
-
-int saa7146_res_get(struct saa7146_fh *fh, unsigned int bit)
-{
-	struct saa7146_dev *dev = fh->dev;
-	struct saa7146_vv *vv = dev->vv_data;
-
-	if (fh->resources & bit) {
-		DEB_D("already allocated! want: 0x%02x, cur:0x%02x\n",
-		      bit, vv->resources);
-		/* have it already allocated */
-		return 1;
-	}
-
-	/* is it free? */
-	if (vv->resources & bit) {
-		DEB_D("locked! vv->resources:0x%02x, we want:0x%02x\n",
-		      vv->resources, bit);
-		/* no, someone else uses it */
-		return 0;
-	}
-	/* it's free, grab it */
-	fh->resources |= bit;
-	vv->resources |= bit;
-	DEB_D("res: get 0x%02x, cur:0x%02x\n", bit, vv->resources);
-	return 1;
-}
-
-void saa7146_res_free(struct saa7146_fh *fh, unsigned int bits)
-{
-	struct saa7146_dev *dev = fh->dev;
-	struct saa7146_vv *vv = dev->vv_data;
-
-	BUG_ON((fh->resources & bits) != bits);
-
-	fh->resources &= ~bits;
-	vv->resources &= ~bits;
-	DEB_D("res: put 0x%02x, cur:0x%02x\n", bits, vv->resources);
-}
-
-
-/********************************************************************************/
-/* common dma functions */
-
-void saa7146_dma_free(struct saa7146_dev *dev,struct videobuf_queue *q,
-						struct saa7146_buf *buf)
-{
-	struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
-	DEB_EE("dev:%p, buf:%p\n", dev, buf);
-
-	videobuf_waiton(q, &buf->vb, 0, 0);
-	videobuf_dma_unmap(q->dev, dma);
-	videobuf_dma_free(dma);
-	buf->vb.state = VIDEOBUF_NEEDS_INIT;
-}
-
-
-/********************************************************************************/
-/* common buffer functions */
-
-int saa7146_buffer_queue(struct saa7146_dev *dev,
-			 struct saa7146_dmaqueue *q,
-			 struct saa7146_buf *buf)
-{
-	assert_spin_locked(&dev->slock);
-	DEB_EE("dev:%p, dmaq:%p, buf:%p\n", dev, q, buf);
-
-	BUG_ON(!q);
-
-	if (NULL == q->curr) {
-		q->curr = buf;
-		DEB_D("immediately activating buffer %p\n", buf);
-		buf->activate(dev,buf,NULL);
-	} else {
-		list_add_tail(&buf->vb.queue,&q->queue);
-		buf->vb.state = VIDEOBUF_QUEUED;
-		DEB_D("adding buffer %p to queue. (active buffer present)\n",
-		      buf);
-	}
-	return 0;
-}
-
-void saa7146_buffer_finish(struct saa7146_dev *dev,
-			   struct saa7146_dmaqueue *q,
-			   int state)
-{
-	assert_spin_locked(&dev->slock);
-	DEB_EE("dev:%p, dmaq:%p, state:%d\n", dev, q, state);
-	DEB_EE("q->curr:%p\n", q->curr);
-
-	/* finish current buffer */
-	if (NULL == q->curr) {
-		DEB_D("aiii. no current buffer\n");
-		return;
-	}
-
-	q->curr->vb.state = state;
-	q->curr->vb.ts = ktime_get_ns();
-	wake_up(&q->curr->vb.done);
-
-	q->curr = NULL;
-}
-
-void saa7146_buffer_next(struct saa7146_dev *dev,
-			 struct saa7146_dmaqueue *q, int vbi)
-{
-	struct saa7146_buf *buf,*next = NULL;
-
-	BUG_ON(!q);
-
-	DEB_INT("dev:%p, dmaq:%p, vbi:%d\n", dev, q, vbi);
-
-	assert_spin_locked(&dev->slock);
-	if (!list_empty(&q->queue)) {
-		/* activate next one from queue */
-		buf = list_entry(q->queue.next,struct saa7146_buf,vb.queue);
-		list_del(&buf->vb.queue);
-		if (!list_empty(&q->queue))
-			next = list_entry(q->queue.next,struct saa7146_buf, vb.queue);
-		q->curr = buf;
-		DEB_INT("next buffer: buf:%p, prev:%p, next:%p\n",
-			buf, q->queue.prev, q->queue.next);
-		buf->activate(dev,buf,next);
-	} else {
-		DEB_INT("no next buffer. stopping.\n");
-		if( 0 != vbi ) {
-			/* turn off video-dma3 */
-			saa7146_write(dev,MC1, MASK_20);
-		} else {
-			/* nothing to do -- just prevent next video-dma1 transfer
-			   by lowering the protection address */
-
-			// fixme: fix this for vflip != 0
-
-			saa7146_write(dev, PROT_ADDR1, 0);
-			saa7146_write(dev, MC2, (MASK_02|MASK_18));
-
-			/* write the address of the rps-program */
-			saa7146_write(dev, RPS_ADDR0, dev->d_rps0.dma_handle);
-			/* turn on rps */
-			saa7146_write(dev, MC1, (MASK_12 | MASK_28));
-
-/*
-			printk("vdma%d.base_even:     0x%08x\n", 1,saa7146_read(dev,BASE_EVEN1));
-			printk("vdma%d.base_odd:      0x%08x\n", 1,saa7146_read(dev,BASE_ODD1));
-			printk("vdma%d.prot_addr:     0x%08x\n", 1,saa7146_read(dev,PROT_ADDR1));
-			printk("vdma%d.base_page:     0x%08x\n", 1,saa7146_read(dev,BASE_PAGE1));
-			printk("vdma%d.pitch:         0x%08x\n", 1,saa7146_read(dev,PITCH1));
-			printk("vdma%d.num_line_byte: 0x%08x\n", 1,saa7146_read(dev,NUM_LINE_BYTE1));
-*/
-		}
-		del_timer(&q->timeout);
-	}
-}
-
-void saa7146_buffer_timeout(struct timer_list *t)
-{
-	struct saa7146_dmaqueue *q = from_timer(q, t, timeout);
-	struct saa7146_dev *dev = q->dev;
-	unsigned long flags;
-
-	DEB_EE("dev:%p, dmaq:%p\n", dev, q);
-
-	spin_lock_irqsave(&dev->slock,flags);
-	if (q->curr) {
-		DEB_D("timeout on %p\n", q->curr);
-		saa7146_buffer_finish(dev,q,VIDEOBUF_ERROR);
-	}
-
-	/* we don't restart the transfer here like other drivers do. when
-	   a streaming capture is disabled, the timeout function will be
-	   called for the current buffer. if we activate the next buffer now,
-	   we mess up our capture logic. if a timeout occurs on another buffer,
-	   then something is seriously broken before, so no need to buffer the
-	   next capture IMHO... */
-/*
-	saa7146_buffer_next(dev,q);
-*/
-	spin_unlock_irqrestore(&dev->slock,flags);
-}
-
-/********************************************************************************/
-/* file operations */
-
-static int fops_open(struct file *file)
-{
-	struct video_device *vdev = video_devdata(file);
-	struct saa7146_dev *dev = video_drvdata(file);
-	struct saa7146_fh *fh = NULL;
-	int result = 0;
-
-	DEB_EE("file:%p, dev:%s\n", file, video_device_node_name(vdev));
-
-	if (mutex_lock_interruptible(vdev->lock))
-		return -ERESTARTSYS;
-
-	DEB_D("using: %p\n", dev);
-
-	/* check if an extension is registered */
-	if( NULL == dev->ext ) {
-		DEB_S("no extension registered for this device\n");
-		result = -ENODEV;
-		goto out;
-	}
-
-	/* allocate per open data */
-	fh = kzalloc(sizeof(*fh),GFP_KERNEL);
-	if (NULL == fh) {
-		DEB_S("cannot allocate memory for per open data\n");
-		result = -ENOMEM;
-		goto out;
-	}
-
-	v4l2_fh_init(&fh->fh, vdev);
-
-	file->private_data = &fh->fh;
-	fh->dev = dev;
-
-	if (vdev->vfl_type == VFL_TYPE_VBI) {
-		DEB_S("initializing vbi...\n");
-		if (dev->ext_vv_data->capabilities & V4L2_CAP_VBI_CAPTURE)
-			result = saa7146_vbi_uops.open(dev,file);
-		if (dev->ext_vv_data->vbi_fops.open)
-			dev->ext_vv_data->vbi_fops.open(file);
-	} else {
-		DEB_S("initializing video...\n");
-		result = saa7146_video_uops.open(dev,file);
-	}
-
-	if (0 != result) {
-		goto out;
-	}
-
-	if( 0 == try_module_get(dev->ext->module)) {
-		result = -EINVAL;
-		goto out;
-	}
-
-	result = 0;
-	v4l2_fh_add(&fh->fh);
-out:
-	if (fh && result != 0) {
-		kfree(fh);
-		file->private_data = NULL;
-	}
-	mutex_unlock(vdev->lock);
-	return result;
-}
-
-static int fops_release(struct file *file)
-{
-	struct video_device *vdev = video_devdata(file);
-	struct saa7146_fh  *fh  = file->private_data;
-	struct saa7146_dev *dev = fh->dev;
-
-	DEB_EE("file:%p\n", file);
-
-	mutex_lock(vdev->lock);
-
-	if (vdev->vfl_type == VFL_TYPE_VBI) {
-		if (dev->ext_vv_data->capabilities & V4L2_CAP_VBI_CAPTURE)
-			saa7146_vbi_uops.release(dev,file);
-		if (dev->ext_vv_data->vbi_fops.release)
-			dev->ext_vv_data->vbi_fops.release(file);
-	} else {
-		saa7146_video_uops.release(dev,file);
-	}
-
-	v4l2_fh_del(&fh->fh);
-	v4l2_fh_exit(&fh->fh);
-	module_put(dev->ext->module);
-	file->private_data = NULL;
-	kfree(fh);
-
-	mutex_unlock(vdev->lock);
-
-	return 0;
-}
-
-static int fops_mmap(struct file *file, struct vm_area_struct * vma)
-{
-	struct video_device *vdev = video_devdata(file);
-	struct saa7146_fh *fh = file->private_data;
-	struct videobuf_queue *q;
-	int res;
-
-	switch (vdev->vfl_type) {
-	case VFL_TYPE_VIDEO: {
-		DEB_EE("V4L2_BUF_TYPE_VIDEO_CAPTURE: file:%p, vma:%p\n",
-		       file, vma);
-		q = &fh->video_q;
-		break;
-		}
-	case VFL_TYPE_VBI: {
-		DEB_EE("V4L2_BUF_TYPE_VBI_CAPTURE: file:%p, vma:%p\n",
-		       file, vma);
-		if (fh->dev->ext_vv_data->capabilities & V4L2_CAP_SLICED_VBI_OUTPUT)
-			return -ENODEV;
-		q = &fh->vbi_q;
-		break;
-		}
-	default:
-		BUG();
-	}
-
-	if (mutex_lock_interruptible(vdev->lock))
-		return -ERESTARTSYS;
-	res = videobuf_mmap_mapper(q, vma);
-	mutex_unlock(vdev->lock);
-	return res;
-}
-
-static __poll_t __fops_poll(struct file *file, struct poll_table_struct *wait)
-{
-	struct video_device *vdev = video_devdata(file);
-	struct saa7146_fh *fh = file->private_data;
-	struct videobuf_buffer *buf = NULL;
-	struct videobuf_queue *q;
-	__poll_t res = v4l2_ctrl_poll(file, wait);
-
-	DEB_EE("file:%p, poll:%p\n", file, wait);
-
-	if (vdev->vfl_type == VFL_TYPE_VBI) {
-		if (fh->dev->ext_vv_data->capabilities & V4L2_CAP_SLICED_VBI_OUTPUT)
-			return res | EPOLLOUT | EPOLLWRNORM;
-		if( 0 == fh->vbi_q.streaming )
-			return res | videobuf_poll_stream(file, &fh->vbi_q, wait);
-		q = &fh->vbi_q;
-	} else {
-		DEB_D("using video queue\n");
-		q = &fh->video_q;
-	}
-
-	if (!list_empty(&q->stream))
-		buf = list_entry(q->stream.next, struct videobuf_buffer, stream);
-
-	if (!buf) {
-		DEB_D("buf == NULL!\n");
-		return res | EPOLLERR;
-	}
-
-	poll_wait(file, &buf->done, wait);
-	if (buf->state == VIDEOBUF_DONE || buf->state == VIDEOBUF_ERROR) {
-		DEB_D("poll succeeded!\n");
-		return res | EPOLLIN | EPOLLRDNORM;
-	}
-
-	DEB_D("nothing to poll for, buf->state:%d\n", buf->state);
-	return res;
-}
-
-static __poll_t fops_poll(struct file *file, struct poll_table_struct *wait)
-{
-	struct video_device *vdev = video_devdata(file);
-	__poll_t res;
-
-	mutex_lock(vdev->lock);
-	res = __fops_poll(file, wait);
-	mutex_unlock(vdev->lock);
-	return res;
-}
-
-static ssize_t fops_read(struct file *file, char __user *data, size_t count, loff_t *ppos)
-{
-	struct video_device *vdev = video_devdata(file);
-	struct saa7146_fh *fh = file->private_data;
-	int ret;
-
-	switch (vdev->vfl_type) {
-	case VFL_TYPE_VIDEO:
-/*
-		DEB_EE("V4L2_BUF_TYPE_VIDEO_CAPTURE: file:%p, data:%p, count:%lun",
-		       file, data, (unsigned long)count);
-*/
-		return saa7146_video_uops.read(file,data,count,ppos);
-	case VFL_TYPE_VBI:
-/*
-		DEB_EE("V4L2_BUF_TYPE_VBI_CAPTURE: file:%p, data:%p, count:%lu\n",
-		       file, data, (unsigned long)count);
-*/
-		if (fh->dev->ext_vv_data->capabilities & V4L2_CAP_VBI_CAPTURE) {
-			if (mutex_lock_interruptible(vdev->lock))
-				return -ERESTARTSYS;
-			ret = saa7146_vbi_uops.read(file, data, count, ppos);
-			mutex_unlock(vdev->lock);
-			return ret;
-		}
-		return -EINVAL;
-	default:
-		BUG();
-	}
-}
-
-static ssize_t fops_write(struct file *file, const char __user *data, size_t count, loff_t *ppos)
-{
-	struct video_device *vdev = video_devdata(file);
-	struct saa7146_fh *fh = file->private_data;
-	int ret;
-
-	switch (vdev->vfl_type) {
-	case VFL_TYPE_VIDEO:
-		return -EINVAL;
-	case VFL_TYPE_VBI:
-		if (fh->dev->ext_vv_data->vbi_fops.write) {
-			if (mutex_lock_interruptible(vdev->lock))
-				return -ERESTARTSYS;
-			ret = fh->dev->ext_vv_data->vbi_fops.write(file, data, count, ppos);
-			mutex_unlock(vdev->lock);
-			return ret;
-		}
-		return -EINVAL;
-	default:
-		BUG();
-	}
-}
-
-static const struct v4l2_file_operations video_fops =
-{
-	.owner		= THIS_MODULE,
-	.open		= fops_open,
-	.release	= fops_release,
-	.read		= fops_read,
-	.write		= fops_write,
-	.poll		= fops_poll,
-	.mmap		= fops_mmap,
-	.unlocked_ioctl	= video_ioctl2,
-};
-
-static void vv_callback(struct saa7146_dev *dev, unsigned long status)
-{
-	u32 isr = status;
-
-	DEB_INT("dev:%p, isr:0x%08x\n", dev, (u32)status);
-
-	if (0 != (isr & (MASK_27))) {
-		DEB_INT("irq: RPS0 (0x%08x)\n", isr);
-		saa7146_video_uops.irq_done(dev,isr);
-	}
-
-	if (0 != (isr & (MASK_28))) {
-		u32 mc2 = saa7146_read(dev, MC2);
-		if( 0 != (mc2 & MASK_15)) {
-			DEB_INT("irq: RPS1 vbi workaround (0x%08x)\n", isr);
-			wake_up(&dev->vv_data->vbi_wq);
-			saa7146_write(dev,MC2, MASK_31);
-			return;
-		}
-		DEB_INT("irq: RPS1 (0x%08x)\n", isr);
-		saa7146_vbi_uops.irq_done(dev,isr);
-	}
-}
-
-static const struct v4l2_ctrl_ops saa7146_ctrl_ops = {
-	.s_ctrl = saa7146_s_ctrl,
-};
-
-int saa7146_vv_init(struct saa7146_dev* dev, struct saa7146_ext_vv *ext_vv)
-{
-	struct v4l2_ctrl_handler *hdl = &dev->ctrl_handler;
-	struct v4l2_pix_format *fmt;
-	struct v4l2_vbi_format *vbi;
-	struct saa7146_vv *vv;
-	int err;
-
-	err = v4l2_device_register(&dev->pci->dev, &dev->v4l2_dev);
-	if (err)
-		return err;
-
-	v4l2_ctrl_handler_init(hdl, 6);
-	v4l2_ctrl_new_std(hdl, &saa7146_ctrl_ops,
-		V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
-	v4l2_ctrl_new_std(hdl, &saa7146_ctrl_ops,
-		V4L2_CID_CONTRAST, 0, 127, 1, 64);
-	v4l2_ctrl_new_std(hdl, &saa7146_ctrl_ops,
-		V4L2_CID_SATURATION, 0, 127, 1, 64);
-	v4l2_ctrl_new_std(hdl, &saa7146_ctrl_ops,
-		V4L2_CID_VFLIP, 0, 1, 1, 0);
-	v4l2_ctrl_new_std(hdl, &saa7146_ctrl_ops,
-		V4L2_CID_HFLIP, 0, 1, 1, 0);
-	if (hdl->error) {
-		err = hdl->error;
-		v4l2_ctrl_handler_free(hdl);
-		v4l2_device_unregister(&dev->v4l2_dev);
-		return err;
-	}
-	dev->v4l2_dev.ctrl_handler = hdl;
-
-	vv = kzalloc(sizeof(struct saa7146_vv), GFP_KERNEL);
-	if (vv == NULL) {
-		ERR("out of memory. aborting.\n");
-		v4l2_ctrl_handler_free(hdl);
-		v4l2_device_unregister(&dev->v4l2_dev);
-		return -ENOMEM;
-	}
-	ext_vv->vid_ops = saa7146_video_ioctl_ops;
-	ext_vv->vbi_ops = saa7146_vbi_ioctl_ops;
-	ext_vv->core_ops = &saa7146_video_ioctl_ops;
-
-	DEB_EE("dev:%p\n", dev);
-
-	/* set default values for video parts of the saa7146 */
-	saa7146_write(dev, BCS_CTRL, 0x80400040);
-
-	/* enable video-port pins */
-	saa7146_write(dev, MC1, (MASK_10 | MASK_26));
-
-	/* save per-device extension data (one extension can
-	   handle different devices that might need different
-	   configuration data) */
-	dev->ext_vv_data = ext_vv;
-
-	vv->d_clipping.cpu_addr =
-		dma_alloc_coherent(&dev->pci->dev, SAA7146_CLIPPING_MEM,
-				   &vv->d_clipping.dma_handle, GFP_KERNEL);
-	if( NULL == vv->d_clipping.cpu_addr ) {
-		ERR("out of memory. aborting.\n");
-		kfree(vv);
-		v4l2_ctrl_handler_free(hdl);
-		v4l2_device_unregister(&dev->v4l2_dev);
-		return -ENOMEM;
-	}
-
-	saa7146_video_uops.init(dev,vv);
-	if (dev->ext_vv_data->capabilities & V4L2_CAP_VBI_CAPTURE)
-		saa7146_vbi_uops.init(dev,vv);
-
-	vv->ov_fb.fmt.width = vv->standard->h_max_out;
-	vv->ov_fb.fmt.height = vv->standard->v_max_out;
-	vv->ov_fb.fmt.pixelformat = V4L2_PIX_FMT_RGB565;
-	vv->ov_fb.fmt.bytesperline = 2 * vv->ov_fb.fmt.width;
-	vv->ov_fb.fmt.sizeimage = vv->ov_fb.fmt.bytesperline * vv->ov_fb.fmt.height;
-	vv->ov_fb.fmt.colorspace = V4L2_COLORSPACE_SRGB;
-
-	fmt = &vv->video_fmt;
-	fmt->width = 384;
-	fmt->height = 288;
-	fmt->pixelformat = V4L2_PIX_FMT_BGR24;
-	fmt->field = V4L2_FIELD_ANY;
-	fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
-	fmt->bytesperline = 3 * fmt->width;
-	fmt->sizeimage = fmt->bytesperline * fmt->height;
-
-	vbi = &vv->vbi_fmt;
-	vbi->sampling_rate	= 27000000;
-	vbi->offset		= 248; /* todo */
-	vbi->samples_per_line	= 720 * 2;
-	vbi->sample_format	= V4L2_PIX_FMT_GREY;
-
-	/* fixme: this only works for PAL */
-	vbi->start[0] = 5;
-	vbi->count[0] = 16;
-	vbi->start[1] = 312;
-	vbi->count[1] = 16;
-
-	timer_setup(&vv->vbi_read_timeout, NULL, 0);
-
-	vv->ov_fb.capability = V4L2_FBUF_CAP_LIST_CLIPPING;
-	vv->ov_fb.flags = V4L2_FBUF_FLAG_PRIMARY;
-	dev->vv_data = vv;
-	dev->vv_callback = &vv_callback;
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(saa7146_vv_init);
-
-int saa7146_vv_release(struct saa7146_dev* dev)
-{
-	struct saa7146_vv *vv = dev->vv_data;
-
-	DEB_EE("dev:%p\n", dev);
-
-	v4l2_device_unregister(&dev->v4l2_dev);
-	dma_free_coherent(&dev->pci->dev, SAA7146_CLIPPING_MEM,
-			  vv->d_clipping.cpu_addr, vv->d_clipping.dma_handle);
-	v4l2_ctrl_handler_free(&dev->ctrl_handler);
-	kfree(vv);
-	dev->vv_data = NULL;
-	dev->vv_callback = NULL;
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(saa7146_vv_release);
-
-int saa7146_register_device(struct video_device *vfd, struct saa7146_dev *dev,
-			    char *name, int type)
-{
-	int err;
-	int i;
-
-	DEB_EE("dev:%p, name:'%s', type:%d\n", dev, name, type);
-
-	vfd->fops = &video_fops;
-	if (type == VFL_TYPE_VIDEO)
-		vfd->ioctl_ops = &dev->ext_vv_data->vid_ops;
-	else
-		vfd->ioctl_ops = &dev->ext_vv_data->vbi_ops;
-	vfd->release = video_device_release_empty;
-	vfd->lock = &dev->v4l2_lock;
-	vfd->v4l2_dev = &dev->v4l2_dev;
-	vfd->tvnorms = 0;
-	for (i = 0; i < dev->ext_vv_data->num_stds; i++)
-		vfd->tvnorms |= dev->ext_vv_data->stds[i].id;
-	strscpy(vfd->name, name, sizeof(vfd->name));
-	vfd->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OVERLAY |
-			   V4L2_CAP_READWRITE | V4L2_CAP_STREAMING;
-	vfd->device_caps |= dev->ext_vv_data->capabilities;
-	if (type == VFL_TYPE_VIDEO)
-		vfd->device_caps &=
-			~(V4L2_CAP_VBI_CAPTURE | V4L2_CAP_SLICED_VBI_OUTPUT);
-	else
-		vfd->device_caps &=
-			~(V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OVERLAY | V4L2_CAP_AUDIO);
-	video_set_drvdata(vfd, dev);
-
-	err = video_register_device(vfd, type, -1);
-	if (err < 0) {
-		ERR("cannot register v4l2 device. skipping.\n");
-		return err;
-	}
-
-	pr_info("%s: registered device %s [v4l2]\n",
-		dev->name, video_device_node_name(vfd));
-	return 0;
-}
-EXPORT_SYMBOL_GPL(saa7146_register_device);
-
-int saa7146_unregister_device(struct video_device *vfd, struct saa7146_dev *dev)
-{
-	DEB_EE("dev:%p\n", dev);
-
-	video_unregister_device(vfd);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(saa7146_unregister_device);
-
-static int __init saa7146_vv_init_module(void)
-{
-	return 0;
-}
-
-
-static void __exit saa7146_vv_cleanup_module(void)
-{
-}
-
-module_init(saa7146_vv_init_module);
-module_exit(saa7146_vv_cleanup_module);
-
-MODULE_AUTHOR("Michael Hunold <michael@mihu.de>");
-MODULE_DESCRIPTION("video4linux driver for saa7146-based hardware");
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/media/deprecated/saa7146/common/saa7146_hlp.c b/drivers/staging/media/deprecated/saa7146/common/saa7146_hlp.c
deleted file mode 100644
index b1222a4cfa4a..000000000000
--- a/drivers/staging/media/deprecated/saa7146/common/saa7146_hlp.c
+++ /dev/null
@@ -1,1046 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include "saa7146_vv.h"
-
-static void calculate_output_format_register(struct saa7146_dev* saa, u32 palette, u32* clip_format)
-{
-	/* clear out the necessary bits */
-	*clip_format &= 0x0000ffff;
-	/* set these bits new */
-	*clip_format |=  (( ((palette&0xf00)>>8) << 30) | ((palette&0x00f) << 24) | (((palette&0x0f0)>>4) << 16));
-}
-
-static void calculate_hps_source_and_sync(struct saa7146_dev *dev, int source, int sync, u32* hps_ctrl)
-{
-	*hps_ctrl &= ~(MASK_30 | MASK_31 | MASK_28);
-	*hps_ctrl |= (source << 30) | (sync << 28);
-}
-
-static void calculate_hxo_and_hyo(struct saa7146_vv *vv, u32* hps_h_scale, u32* hps_ctrl)
-{
-	int hyo = 0, hxo = 0;
-
-	hyo = vv->standard->v_offset;
-	hxo = vv->standard->h_offset;
-
-	*hps_h_scale	&= ~(MASK_B0 | 0xf00);
-	*hps_h_scale	|= (hxo <<  0);
-
-	*hps_ctrl	&= ~(MASK_W0 | MASK_B2);
-	*hps_ctrl	|= (hyo << 12);
-}
-
-/* helper functions for the calculation of the horizontal- and vertical
-   scaling registers, clip-format-register etc ...
-   these functions take pointers to the (most-likely read-out
-   original-values) and manipulate them according to the requested
-   changes.
-*/
-
-/* hps_coeff used for CXY and CXUV; scale 1/1 -> scale 1/64 */
-static struct {
-	u16 hps_coeff;
-	u16 weight_sum;
-} hps_h_coeff_tab [] = {
-	{0x00,   2}, {0x02,   4}, {0x00,   4}, {0x06,   8}, {0x02,   8},
-	{0x08,   8}, {0x00,   8}, {0x1E,  16}, {0x0E,   8}, {0x26,   8},
-	{0x06,   8}, {0x42,   8}, {0x02,   8}, {0x80,   8}, {0x00,   8},
-	{0xFE,  16}, {0xFE,   8}, {0x7E,   8}, {0x7E,   8}, {0x3E,   8},
-	{0x3E,   8}, {0x1E,   8}, {0x1E,   8}, {0x0E,   8}, {0x0E,   8},
-	{0x06,   8}, {0x06,   8}, {0x02,   8}, {0x02,   8}, {0x00,   8},
-	{0x00,   8}, {0xFE,  16}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8},
-	{0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8},
-	{0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8},
-	{0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0x7E,   8},
-	{0x7E,   8}, {0x3E,   8}, {0x3E,   8}, {0x1E,   8}, {0x1E,   8},
-	{0x0E,   8}, {0x0E,   8}, {0x06,   8}, {0x06,   8}, {0x02,   8},
-	{0x02,   8}, {0x00,   8}, {0x00,   8}, {0xFE,  16}
-};
-
-/* table of attenuation values for horizontal scaling */
-static u8 h_attenuation[] = { 1, 2, 4, 8, 2, 4, 8, 16, 0};
-
-/* calculate horizontal scale registers */
-static int calculate_h_scale_registers(struct saa7146_dev *dev,
-	int in_x, int out_x, int flip_lr,
-	u32* hps_ctrl, u32* hps_v_gain, u32* hps_h_prescale, u32* hps_h_scale)
-{
-	/* horizontal prescaler */
-	u32 dcgx = 0, xpsc = 0, xacm = 0, cxy = 0, cxuv = 0;
-	/* horizontal scaler */
-	u32 xim = 0, xp = 0, xsci =0;
-	/* vertical scale & gain */
-	u32 pfuv = 0;
-
-	/* helper variables */
-	u32 h_atten = 0, i = 0;
-
-	if ( 0 == out_x ) {
-		return -EINVAL;
-	}
-
-	/* mask out vanity-bit */
-	*hps_ctrl &= ~MASK_29;
-
-	/* calculate prescale-(xspc)-value:	[n   .. 1/2) : 1
-						[1/2 .. 1/3) : 2
-						[1/3 .. 1/4) : 3
-						...		*/
-	if (in_x > out_x) {
-		xpsc = in_x / out_x;
-	}
-	else {
-		/* zooming */
-		xpsc = 1;
-	}
-
-	/* if flip_lr-bit is set, number of pixels after
-	   horizontal prescaling must be < 384 */
-	if ( 0 != flip_lr ) {
-
-		/* set vanity bit */
-		*hps_ctrl |= MASK_29;
-
-		while (in_x / xpsc >= 384 )
-			xpsc++;
-	}
-	/* if zooming is wanted, number of pixels after
-	   horizontal prescaling must be < 768 */
-	else {
-		while ( in_x / xpsc >= 768 )
-			xpsc++;
-	}
-
-	/* maximum prescale is 64 (p.69) */
-	if ( xpsc > 64 )
-		xpsc = 64;
-
-	/* keep xacm clear*/
-	xacm = 0;
-
-	/* set horizontal filter parameters (CXY = CXUV) */
-	cxy = hps_h_coeff_tab[( (xpsc - 1) < 63 ? (xpsc - 1) : 63 )].hps_coeff;
-	cxuv = cxy;
-
-	/* calculate and set horizontal fine scale (xsci) */
-
-	/* bypass the horizontal scaler ? */
-	if ( (in_x == out_x) && ( 1 == xpsc ) )
-		xsci = 0x400;
-	else
-		xsci = ( (1024 * in_x) / (out_x * xpsc) ) + xpsc;
-
-	/* set start phase for horizontal fine scale (xp) to 0 */
-	xp = 0;
-
-	/* set xim, if we bypass the horizontal scaler */
-	if ( 0x400 == xsci )
-		xim = 1;
-	else
-		xim = 0;
-
-	/* if the prescaler is bypassed, enable horizontal
-	   accumulation mode (xacm) and clear dcgx */
-	if( 1 == xpsc ) {
-		xacm = 1;
-		dcgx = 0;
-	} else {
-		xacm = 0;
-		/* get best match in the table of attenuations
-		   for horizontal scaling */
-		h_atten = hps_h_coeff_tab[( (xpsc - 1) < 63 ? (xpsc - 1) : 63 )].weight_sum;
-
-		for (i = 0; h_attenuation[i] != 0; i++) {
-			if (h_attenuation[i] >= h_atten)
-				break;
-		}
-
-		dcgx = i;
-	}
-
-	/* the horizontal scaling increment controls the UV filter
-	   to reduce the bandwidth to improve the display quality,
-	   so set it ... */
-	if ( xsci == 0x400)
-		pfuv = 0x00;
-	else if ( xsci < 0x600)
-		pfuv = 0x01;
-	else if ( xsci < 0x680)
-		pfuv = 0x11;
-	else if ( xsci < 0x700)
-		pfuv = 0x22;
-	else
-		pfuv = 0x33;
-
-
-	*hps_v_gain  &= MASK_W0|MASK_B2;
-	*hps_v_gain  |= (pfuv << 24);
-
-	*hps_h_scale	&= ~(MASK_W1 | 0xf000);
-	*hps_h_scale	|= (xim << 31) | (xp << 24) | (xsci << 12);
-
-	*hps_h_prescale	|= (dcgx << 27) | ((xpsc-1) << 18) | (xacm << 17) | (cxy << 8) | (cxuv << 0);
-
-	return 0;
-}
-
-static struct {
-	u16 hps_coeff;
-	u16 weight_sum;
-} hps_v_coeff_tab [] = {
- {0x0100,   2},  {0x0102,   4},  {0x0300,   4},  {0x0106,   8},  {0x0502,   8},
- {0x0708,   8},  {0x0F00,   8},  {0x011E,  16},  {0x110E,  16},  {0x1926,  16},
- {0x3906,  16},  {0x3D42,  16},  {0x7D02,  16},  {0x7F80,  16},  {0xFF00,  16},
- {0x01FE,  32},  {0x01FE,  32},  {0x817E,  32},  {0x817E,  32},  {0xC13E,  32},
- {0xC13E,  32},  {0xE11E,  32},  {0xE11E,  32},  {0xF10E,  32},  {0xF10E,  32},
- {0xF906,  32},  {0xF906,  32},  {0xFD02,  32},  {0xFD02,  32},  {0xFF00,  32},
- {0xFF00,  32},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},
- {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},
- {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},
- {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x817E,  64},
- {0x817E,  64},  {0xC13E,  64},  {0xC13E,  64},  {0xE11E,  64},  {0xE11E,  64},
- {0xF10E,  64},  {0xF10E,  64},  {0xF906,  64},  {0xF906,  64},  {0xFD02,  64},
- {0xFD02,  64},  {0xFF00,  64},  {0xFF00,  64},  {0x01FE, 128}
-};
-
-/* table of attenuation values for vertical scaling */
-static u16 v_attenuation[] = { 2, 4, 8, 16, 32, 64, 128, 256, 0};
-
-/* calculate vertical scale registers */
-static int calculate_v_scale_registers(struct saa7146_dev *dev, enum v4l2_field field,
-	int in_y, int out_y, u32* hps_v_scale, u32* hps_v_gain)
-{
-	int lpi = 0;
-
-	/* vertical scaling */
-	u32 yacm = 0, ysci = 0, yacl = 0, ypo = 0, ype = 0;
-	/* vertical scale & gain */
-	u32 dcgy = 0, cya_cyb = 0;
-
-	/* helper variables */
-	u32 v_atten = 0, i = 0;
-
-	/* error, if vertical zooming */
-	if ( in_y < out_y ) {
-		return -EINVAL;
-	}
-
-	/* linear phase interpolation may be used
-	   if scaling is between 1 and 1/2 (both fields used)
-	   or scaling is between 1/2 and 1/4 (if only one field is used) */
-
-	if (V4L2_FIELD_HAS_BOTH(field)) {
-		if( 2*out_y >= in_y) {
-			lpi = 1;
-		}
-	} else if (field == V4L2_FIELD_TOP
-		|| field == V4L2_FIELD_ALTERNATE
-		|| field == V4L2_FIELD_BOTTOM) {
-		if( 4*out_y >= in_y ) {
-			lpi = 1;
-		}
-		out_y *= 2;
-	}
-	if( 0 != lpi ) {
-
-		yacm = 0;
-		yacl = 0;
-		cya_cyb = 0x00ff;
-
-		/* calculate scaling increment */
-		if ( in_y > out_y )
-			ysci = ((1024 * in_y) / (out_y + 1)) - 1024;
-		else
-			ysci = 0;
-
-		dcgy = 0;
-
-		/* calculate ype and ypo */
-		ype = ysci / 16;
-		ypo = ype + (ysci / 64);
-
-	} else {
-		yacm = 1;
-
-		/* calculate scaling increment */
-		ysci = (((10 * 1024 * (in_y - out_y - 1)) / in_y) + 9) / 10;
-
-		/* calculate ype and ypo */
-		ypo = ype = ((ysci + 15) / 16);
-
-		/* the sequence length interval (yacl) has to be set according
-		   to the prescale value, e.g.	[n   .. 1/2) : 0
-						[1/2 .. 1/3) : 1
-						[1/3 .. 1/4) : 2
-						... */
-		if ( ysci < 512) {
-			yacl = 0;
-		} else {
-			yacl = ( ysci / (1024 - ysci) );
-		}
-
-		/* get filter coefficients for cya, cyb from table hps_v_coeff_tab */
-		cya_cyb = hps_v_coeff_tab[ (yacl < 63 ? yacl : 63 ) ].hps_coeff;
-
-		/* get best match in the table of attenuations for vertical scaling */
-		v_atten = hps_v_coeff_tab[ (yacl < 63 ? yacl : 63 ) ].weight_sum;
-
-		for (i = 0; v_attenuation[i] != 0; i++) {
-			if (v_attenuation[i] >= v_atten)
-				break;
-		}
-
-		dcgy = i;
-	}
-
-	/* ypo and ype swapped in spec ? */
-	*hps_v_scale	|= (yacm << 31) | (ysci << 21) | (yacl << 15) | (ypo << 8 ) | (ype << 1);
-
-	*hps_v_gain	&= ~(MASK_W0|MASK_B2);
-	*hps_v_gain	|= (dcgy << 16) | (cya_cyb << 0);
-
-	return 0;
-}
-
-/* simple bubble-sort algorithm with duplicate elimination */
-static int sort_and_eliminate(u32* values, int* count)
-{
-	int low = 0, high = 0, top = 0;
-	int cur = 0, next = 0;
-
-	/* sanity checks */
-	if( (0 > *count) || (NULL == values) ) {
-		return -EINVAL;
-	}
-
-	/* bubble sort the first @count items of the array @values */
-	for( top = *count; top > 0; top--) {
-		for( low = 0, high = 1; high < top; low++, high++) {
-			if( values[low] > values[high] )
-				swap(values[low], values[high]);
-		}
-	}
-
-	/* remove duplicate items */
-	for( cur = 0, next = 1; next < *count; next++) {
-		if( values[cur] != values[next])
-			values[++cur] = values[next];
-	}
-
-	*count = cur + 1;
-
-	return 0;
-}
-
-static void calculate_clipping_registers_rect(struct saa7146_dev *dev, struct saa7146_fh *fh,
-	struct saa7146_video_dma *vdma2, u32* clip_format, u32* arbtr_ctrl, enum v4l2_field field)
-{
-	struct saa7146_vv *vv = dev->vv_data;
-	__le32 *clipping = vv->d_clipping.cpu_addr;
-
-	int width = vv->ov.win.w.width;
-	int height =  vv->ov.win.w.height;
-	int clipcount = vv->ov.nclips;
-
-	u32 line_list[32];
-	u32 pixel_list[32];
-	int numdwords = 0;
-
-	int i = 0, j = 0;
-	int cnt_line = 0, cnt_pixel = 0;
-
-	int x[32], y[32], w[32], h[32];
-
-	/* clear out memory */
-	memset(&line_list[0],  0x00, sizeof(u32)*32);
-	memset(&pixel_list[0], 0x00, sizeof(u32)*32);
-	memset(clipping,  0x00, SAA7146_CLIPPING_MEM);
-
-	/* fill the line and pixel-lists */
-	for(i = 0; i < clipcount; i++) {
-		int l = 0, r = 0, t = 0, b = 0;
-
-		x[i] = vv->ov.clips[i].c.left;
-		y[i] = vv->ov.clips[i].c.top;
-		w[i] = vv->ov.clips[i].c.width;
-		h[i] = vv->ov.clips[i].c.height;
-
-		if( w[i] < 0) {
-			x[i] += w[i]; w[i] = -w[i];
-		}
-		if( h[i] < 0) {
-			y[i] += h[i]; h[i] = -h[i];
-		}
-		if( x[i] < 0) {
-			w[i] += x[i]; x[i] = 0;
-		}
-		if( y[i] < 0) {
-			h[i] += y[i]; y[i] = 0;
-		}
-		if( 0 != vv->vflip ) {
-			y[i] = height - y[i] - h[i];
-		}
-
-		l = x[i];
-		r = x[i]+w[i];
-		t = y[i];
-		b = y[i]+h[i];
-
-		/* insert left/right coordinates */
-		pixel_list[ 2*i   ] = min_t(int, l, width);
-		pixel_list[(2*i)+1] = min_t(int, r, width);
-		/* insert top/bottom coordinates */
-		line_list[ 2*i   ] = min_t(int, t, height);
-		line_list[(2*i)+1] = min_t(int, b, height);
-	}
-
-	/* sort and eliminate lists */
-	cnt_line = cnt_pixel = 2*clipcount;
-	sort_and_eliminate( &pixel_list[0], &cnt_pixel );
-	sort_and_eliminate( &line_list[0], &cnt_line );
-
-	/* calculate the number of used u32s */
-	numdwords = max_t(int, (cnt_line+1), (cnt_pixel+1))*2;
-	numdwords = max_t(int, 4, numdwords);
-	numdwords = min_t(int, 64, numdwords);
-
-	/* fill up cliptable */
-	for(i = 0; i < cnt_pixel; i++) {
-		clipping[2*i] |= cpu_to_le32(pixel_list[i] << 16);
-	}
-	for(i = 0; i < cnt_line; i++) {
-		clipping[(2*i)+1] |= cpu_to_le32(line_list[i] << 16);
-	}
-
-	/* fill up cliptable with the display infos */
-	for(j = 0; j < clipcount; j++) {
-
-		for(i = 0; i < cnt_pixel; i++) {
-
-			if( x[j] < 0)
-				x[j] = 0;
-
-			if( pixel_list[i] < (x[j] + w[j])) {
-
-				if ( pixel_list[i] >= x[j] ) {
-					clipping[2*i] |= cpu_to_le32(1 << j);
-				}
-			}
-		}
-		for(i = 0; i < cnt_line; i++) {
-
-			if( y[j] < 0)
-				y[j] = 0;
-
-			if( line_list[i] < (y[j] + h[j]) ) {
-
-				if( line_list[i] >= y[j] ) {
-					clipping[(2*i)+1] |= cpu_to_le32(1 << j);
-				}
-			}
-		}
-	}
-
-	/* adjust arbitration control register */
-	*arbtr_ctrl &= 0xffff00ff;
-	*arbtr_ctrl |= 0x00001c00;
-
-	vdma2->base_even	= vv->d_clipping.dma_handle;
-	vdma2->base_odd		= vv->d_clipping.dma_handle;
-	vdma2->prot_addr	= vv->d_clipping.dma_handle+((sizeof(u32))*(numdwords));
-	vdma2->base_page	= 0x04;
-	vdma2->pitch		= 0x00;
-	vdma2->num_line_byte	= (0 << 16 | (sizeof(u32))*(numdwords-1) );
-
-	/* set clipping-mode. this depends on the field(s) used */
-	*clip_format &= 0xfffffff7;
-	if (V4L2_FIELD_HAS_BOTH(field)) {
-		*clip_format |= 0x00000008;
-	} else {
-		*clip_format |= 0x00000000;
-	}
-}
-
-/* disable clipping */
-static void saa7146_disable_clipping(struct saa7146_dev *dev)
-{
-	u32 clip_format	= saa7146_read(dev, CLIP_FORMAT_CTRL);
-
-	/* mask out relevant bits (=lower word)*/
-	clip_format &= MASK_W1;
-
-	/* upload clipping-registers*/
-	saa7146_write(dev, CLIP_FORMAT_CTRL,clip_format);
-	saa7146_write(dev, MC2, (MASK_05 | MASK_21));
-
-	/* disable video dma2 */
-	saa7146_write(dev, MC1, MASK_21);
-}
-
-static void saa7146_set_clipping_rect(struct saa7146_fh *fh)
-{
-	struct saa7146_dev *dev = fh->dev;
-	struct saa7146_vv *vv = dev->vv_data;
-	enum v4l2_field field = vv->ov.win.field;
-	struct	saa7146_video_dma vdma2;
-	u32 clip_format;
-	u32 arbtr_ctrl;
-
-	/* check clipcount, disable clipping if clipcount == 0*/
-	if (vv->ov.nclips == 0) {
-		saa7146_disable_clipping(dev);
-		return;
-	}
-
-	clip_format = saa7146_read(dev, CLIP_FORMAT_CTRL);
-	arbtr_ctrl = saa7146_read(dev, PCI_BT_V1);
-
-	calculate_clipping_registers_rect(dev, fh, &vdma2, &clip_format, &arbtr_ctrl, field);
-
-	/* set clipping format */
-	clip_format &= 0xffff0008;
-	clip_format |= (SAA7146_CLIPPING_RECT << 4);
-
-	/* prepare video dma2 */
-	saa7146_write(dev, BASE_EVEN2,		vdma2.base_even);
-	saa7146_write(dev, BASE_ODD2,		vdma2.base_odd);
-	saa7146_write(dev, PROT_ADDR2,		vdma2.prot_addr);
-	saa7146_write(dev, BASE_PAGE2,		vdma2.base_page);
-	saa7146_write(dev, PITCH2,		vdma2.pitch);
-	saa7146_write(dev, NUM_LINE_BYTE2,	vdma2.num_line_byte);
-
-	/* prepare the rest */
-	saa7146_write(dev, CLIP_FORMAT_CTRL,clip_format);
-	saa7146_write(dev, PCI_BT_V1, arbtr_ctrl);
-
-	/* upload clip_control-register, clipping-registers, enable video dma2 */
-	saa7146_write(dev, MC2, (MASK_05 | MASK_21 | MASK_03 | MASK_19));
-	saa7146_write(dev, MC1, (MASK_05 | MASK_21));
-}
-
-static void saa7146_set_window(struct saa7146_dev *dev, int width, int height, enum v4l2_field field)
-{
-	struct saa7146_vv *vv = dev->vv_data;
-
-	int source = vv->current_hps_source;
-	int sync = vv->current_hps_sync;
-
-	u32 hps_v_scale = 0, hps_v_gain  = 0, hps_ctrl = 0, hps_h_prescale = 0, hps_h_scale = 0;
-
-	/* set vertical scale */
-	hps_v_scale = 0; /* all bits get set by the function-call */
-	hps_v_gain  = 0; /* fixme: saa7146_read(dev, HPS_V_GAIN);*/
-	calculate_v_scale_registers(dev, field, vv->standard->v_field*2, height, &hps_v_scale, &hps_v_gain);
-
-	/* set horizontal scale */
-	hps_ctrl	= 0;
-	hps_h_prescale	= 0; /* all bits get set in the function */
-	hps_h_scale	= 0;
-	calculate_h_scale_registers(dev, vv->standard->h_pixels, width, vv->hflip, &hps_ctrl, &hps_v_gain, &hps_h_prescale, &hps_h_scale);
-
-	/* set hyo and hxo */
-	calculate_hxo_and_hyo(vv, &hps_h_scale, &hps_ctrl);
-	calculate_hps_source_and_sync(dev, source, sync, &hps_ctrl);
-
-	/* write out new register contents */
-	saa7146_write(dev, HPS_V_SCALE,	hps_v_scale);
-	saa7146_write(dev, HPS_V_GAIN,	hps_v_gain);
-	saa7146_write(dev, HPS_CTRL,	hps_ctrl);
-	saa7146_write(dev, HPS_H_PRESCALE,hps_h_prescale);
-	saa7146_write(dev, HPS_H_SCALE,	hps_h_scale);
-
-	/* upload shadow-ram registers */
-	saa7146_write(dev, MC2, (MASK_05 | MASK_06 | MASK_21 | MASK_22) );
-}
-
-/* calculate the new memory offsets for a desired position */
-static void saa7146_set_position(struct saa7146_dev *dev, int w_x, int w_y, int w_height, enum v4l2_field field, u32 pixelformat)
-{
-	struct saa7146_vv *vv = dev->vv_data;
-	struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev, pixelformat);
-
-	int b_depth = vv->ov_fmt->depth;
-	int b_bpl = vv->ov_fb.fmt.bytesperline;
-	/* The unsigned long cast is to remove a 64-bit compile warning since
-	   it looks like a 64-bit address is cast to a 32-bit value, even
-	   though the base pointer is really a 32-bit physical address that
-	   goes into a 32-bit DMA register.
-	   FIXME: might not work on some 64-bit platforms, but see the FIXME
-	   in struct v4l2_framebuffer (videodev2.h) for that.
-	 */
-	u32 base = (u32)(unsigned long)vv->ov_fb.base;
-
-	struct	saa7146_video_dma vdma1;
-
-	/* calculate memory offsets for picture, look if we shall top-down-flip */
-	vdma1.pitch	= 2*b_bpl;
-	if ( 0 == vv->vflip ) {
-		vdma1.base_even = base + (w_y * (vdma1.pitch/2)) + (w_x * (b_depth / 8));
-		vdma1.base_odd  = vdma1.base_even + (vdma1.pitch / 2);
-		vdma1.prot_addr = vdma1.base_even + (w_height * (vdma1.pitch / 2));
-	}
-	else {
-		vdma1.base_even = base + ((w_y+w_height) * (vdma1.pitch/2)) + (w_x * (b_depth / 8));
-		vdma1.base_odd  = vdma1.base_even - (vdma1.pitch / 2);
-		vdma1.prot_addr = vdma1.base_odd - (w_height * (vdma1.pitch / 2));
-	}
-
-	if (V4L2_FIELD_HAS_BOTH(field)) {
-	} else if (field == V4L2_FIELD_ALTERNATE) {
-		/* fixme */
-		vdma1.base_odd = vdma1.prot_addr;
-		vdma1.pitch /= 2;
-	} else if (field == V4L2_FIELD_TOP) {
-		vdma1.base_odd = vdma1.prot_addr;
-		vdma1.pitch /= 2;
-	} else if (field == V4L2_FIELD_BOTTOM) {
-		vdma1.base_odd = vdma1.base_even;
-		vdma1.base_even = vdma1.prot_addr;
-		vdma1.pitch /= 2;
-	}
-
-	if ( 0 != vv->vflip ) {
-		vdma1.pitch *= -1;
-	}
-
-	vdma1.base_page = sfmt->swap;
-	vdma1.num_line_byte = (vv->standard->v_field<<16)+vv->standard->h_pixels;
-
-	saa7146_write_out_dma(dev, 1, &vdma1);
-}
-
-static void saa7146_set_output_format(struct saa7146_dev *dev, unsigned long palette)
-{
-	u32 clip_format = saa7146_read(dev, CLIP_FORMAT_CTRL);
-
-	/* call helper function */
-	calculate_output_format_register(dev,palette,&clip_format);
-
-	/* update the hps registers */
-	saa7146_write(dev, CLIP_FORMAT_CTRL, clip_format);
-	saa7146_write(dev, MC2, (MASK_05 | MASK_21));
-}
-
-/* select input-source */
-void saa7146_set_hps_source_and_sync(struct saa7146_dev *dev, int source, int sync)
-{
-	struct saa7146_vv *vv = dev->vv_data;
-	u32 hps_ctrl = 0;
-
-	/* read old state */
-	hps_ctrl = saa7146_read(dev, HPS_CTRL);
-
-	hps_ctrl &= ~( MASK_31 | MASK_30 | MASK_28 );
-	hps_ctrl |= (source << 30) | (sync << 28);
-
-	/* write back & upload register */
-	saa7146_write(dev, HPS_CTRL, hps_ctrl);
-	saa7146_write(dev, MC2, (MASK_05 | MASK_21));
-
-	vv->current_hps_source = source;
-	vv->current_hps_sync = sync;
-}
-EXPORT_SYMBOL_GPL(saa7146_set_hps_source_and_sync);
-
-int saa7146_enable_overlay(struct saa7146_fh *fh)
-{
-	struct saa7146_dev *dev = fh->dev;
-	struct saa7146_vv *vv = dev->vv_data;
-
-	saa7146_set_window(dev, vv->ov.win.w.width, vv->ov.win.w.height, vv->ov.win.field);
-	saa7146_set_position(dev, vv->ov.win.w.left, vv->ov.win.w.top, vv->ov.win.w.height, vv->ov.win.field, vv->ov_fmt->pixelformat);
-	saa7146_set_output_format(dev, vv->ov_fmt->trans);
-	saa7146_set_clipping_rect(fh);
-
-	/* enable video dma1 */
-	saa7146_write(dev, MC1, (MASK_06 | MASK_22));
-	return 0;
-}
-
-void saa7146_disable_overlay(struct saa7146_fh *fh)
-{
-	struct saa7146_dev *dev = fh->dev;
-
-	/* disable clipping + video dma1 */
-	saa7146_disable_clipping(dev);
-	saa7146_write(dev, MC1, MASK_22);
-}
-
-void saa7146_write_out_dma(struct saa7146_dev* dev, int which, struct saa7146_video_dma* vdma)
-{
-	int where = 0;
-
-	if( which < 1 || which > 3) {
-		return;
-	}
-
-	/* calculate starting address */
-	where  = (which-1)*0x18;
-
-	saa7146_write(dev, where,	vdma->base_odd);
-	saa7146_write(dev, where+0x04,	vdma->base_even);
-	saa7146_write(dev, where+0x08,	vdma->prot_addr);
-	saa7146_write(dev, where+0x0c,	vdma->pitch);
-	saa7146_write(dev, where+0x10,	vdma->base_page);
-	saa7146_write(dev, where+0x14,	vdma->num_line_byte);
-
-	/* upload */
-	saa7146_write(dev, MC2, (MASK_02<<(which-1))|(MASK_18<<(which-1)));
-/*
-	printk("vdma%d.base_even:     0x%08x\n", which,vdma->base_even);
-	printk("vdma%d.base_odd:      0x%08x\n", which,vdma->base_odd);
-	printk("vdma%d.prot_addr:     0x%08x\n", which,vdma->prot_addr);
-	printk("vdma%d.base_page:     0x%08x\n", which,vdma->base_page);
-	printk("vdma%d.pitch:         0x%08x\n", which,vdma->pitch);
-	printk("vdma%d.num_line_byte: 0x%08x\n", which,vdma->num_line_byte);
-*/
-}
-
-static int calculate_video_dma_grab_packed(struct saa7146_dev* dev, struct saa7146_buf *buf)
-{
-	struct saa7146_vv *vv = dev->vv_data;
-	struct saa7146_video_dma vdma1;
-
-	struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
-
-	int width = buf->fmt->width;
-	int height = buf->fmt->height;
-	int bytesperline = buf->fmt->bytesperline;
-	enum v4l2_field field = buf->fmt->field;
-
-	int depth = sfmt->depth;
-
-	DEB_CAP("[size=%dx%d,fields=%s]\n",
-		width, height, v4l2_field_names[field]);
-
-	if( bytesperline != 0) {
-		vdma1.pitch = bytesperline*2;
-	} else {
-		vdma1.pitch = (width*depth*2)/8;
-	}
-	vdma1.num_line_byte	= ((vv->standard->v_field<<16) + vv->standard->h_pixels);
-	vdma1.base_page		= buf->pt[0].dma | ME1 | sfmt->swap;
-
-	if( 0 != vv->vflip ) {
-		vdma1.prot_addr	= buf->pt[0].offset;
-		vdma1.base_even	= buf->pt[0].offset+(vdma1.pitch/2)*height;
-		vdma1.base_odd	= vdma1.base_even - (vdma1.pitch/2);
-	} else {
-		vdma1.base_even	= buf->pt[0].offset;
-		vdma1.base_odd	= vdma1.base_even + (vdma1.pitch/2);
-		vdma1.prot_addr	= buf->pt[0].offset+(vdma1.pitch/2)*height;
-	}
-
-	if (V4L2_FIELD_HAS_BOTH(field)) {
-	} else if (field == V4L2_FIELD_ALTERNATE) {
-		/* fixme */
-		if ( vv->last_field == V4L2_FIELD_TOP ) {
-			vdma1.base_odd	= vdma1.prot_addr;
-			vdma1.pitch /= 2;
-		} else if ( vv->last_field == V4L2_FIELD_BOTTOM ) {
-			vdma1.base_odd	= vdma1.base_even;
-			vdma1.base_even = vdma1.prot_addr;
-			vdma1.pitch /= 2;
-		}
-	} else if (field == V4L2_FIELD_TOP) {
-		vdma1.base_odd	= vdma1.prot_addr;
-		vdma1.pitch /= 2;
-	} else if (field == V4L2_FIELD_BOTTOM) {
-		vdma1.base_odd	= vdma1.base_even;
-		vdma1.base_even = vdma1.prot_addr;
-		vdma1.pitch /= 2;
-	}
-
-	if( 0 != vv->vflip ) {
-		vdma1.pitch *= -1;
-	}
-
-	saa7146_write_out_dma(dev, 1, &vdma1);
-	return 0;
-}
-
-static int calc_planar_422(struct saa7146_vv *vv, struct saa7146_buf *buf, struct saa7146_video_dma *vdma2, struct saa7146_video_dma *vdma3)
-{
-	int height = buf->fmt->height;
-	int width = buf->fmt->width;
-
-	vdma2->pitch	= width;
-	vdma3->pitch	= width;
-
-	/* fixme: look at bytesperline! */
-
-	if( 0 != vv->vflip ) {
-		vdma2->prot_addr	= buf->pt[1].offset;
-		vdma2->base_even	= ((vdma2->pitch/2)*height)+buf->pt[1].offset;
-		vdma2->base_odd		= vdma2->base_even - (vdma2->pitch/2);
-
-		vdma3->prot_addr	= buf->pt[2].offset;
-		vdma3->base_even	= ((vdma3->pitch/2)*height)+buf->pt[2].offset;
-		vdma3->base_odd		= vdma3->base_even - (vdma3->pitch/2);
-	} else {
-		vdma3->base_even	= buf->pt[2].offset;
-		vdma3->base_odd		= vdma3->base_even + (vdma3->pitch/2);
-		vdma3->prot_addr	= (vdma3->pitch/2)*height+buf->pt[2].offset;
-
-		vdma2->base_even	= buf->pt[1].offset;
-		vdma2->base_odd		= vdma2->base_even + (vdma2->pitch/2);
-		vdma2->prot_addr	= (vdma2->pitch/2)*height+buf->pt[1].offset;
-	}
-
-	return 0;
-}
-
-static int calc_planar_420(struct saa7146_vv *vv, struct saa7146_buf *buf, struct saa7146_video_dma *vdma2, struct saa7146_video_dma *vdma3)
-{
-	int height = buf->fmt->height;
-	int width = buf->fmt->width;
-
-	vdma2->pitch	= width/2;
-	vdma3->pitch	= width/2;
-
-	if( 0 != vv->vflip ) {
-		vdma2->prot_addr	= buf->pt[2].offset;
-		vdma2->base_even	= ((vdma2->pitch/2)*height)+buf->pt[2].offset;
-		vdma2->base_odd		= vdma2->base_even - (vdma2->pitch/2);
-
-		vdma3->prot_addr	= buf->pt[1].offset;
-		vdma3->base_even	= ((vdma3->pitch/2)*height)+buf->pt[1].offset;
-		vdma3->base_odd		= vdma3->base_even - (vdma3->pitch/2);
-
-	} else {
-		vdma3->base_even	= buf->pt[2].offset;
-		vdma3->base_odd		= vdma3->base_even + (vdma3->pitch);
-		vdma3->prot_addr	= (vdma3->pitch/2)*height+buf->pt[2].offset;
-
-		vdma2->base_even	= buf->pt[1].offset;
-		vdma2->base_odd		= vdma2->base_even + (vdma2->pitch);
-		vdma2->prot_addr	= (vdma2->pitch/2)*height+buf->pt[1].offset;
-	}
-	return 0;
-}
-
-static int calculate_video_dma_grab_planar(struct saa7146_dev* dev, struct saa7146_buf *buf)
-{
-	struct saa7146_vv *vv = dev->vv_data;
-	struct saa7146_video_dma vdma1;
-	struct saa7146_video_dma vdma2;
-	struct saa7146_video_dma vdma3;
-
-	struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
-
-	int width = buf->fmt->width;
-	int height = buf->fmt->height;
-	enum v4l2_field field = buf->fmt->field;
-
-	BUG_ON(0 == buf->pt[0].dma);
-	BUG_ON(0 == buf->pt[1].dma);
-	BUG_ON(0 == buf->pt[2].dma);
-
-	DEB_CAP("[size=%dx%d,fields=%s]\n",
-		width, height, v4l2_field_names[field]);
-
-	/* fixme: look at bytesperline! */
-
-	/* fixme: what happens for user space buffers here?. The offsets are
-	   most likely wrong, this version here only works for page-aligned
-	   buffers, modifications to the pagetable-functions are necessary...*/
-
-	vdma1.pitch		= width*2;
-	vdma1.num_line_byte	= ((vv->standard->v_field<<16) + vv->standard->h_pixels);
-	vdma1.base_page		= buf->pt[0].dma | ME1;
-
-	if( 0 != vv->vflip ) {
-		vdma1.prot_addr	= buf->pt[0].offset;
-		vdma1.base_even	= ((vdma1.pitch/2)*height)+buf->pt[0].offset;
-		vdma1.base_odd	= vdma1.base_even - (vdma1.pitch/2);
-	} else {
-		vdma1.base_even	= buf->pt[0].offset;
-		vdma1.base_odd	= vdma1.base_even + (vdma1.pitch/2);
-		vdma1.prot_addr	= (vdma1.pitch/2)*height+buf->pt[0].offset;
-	}
-
-	vdma2.num_line_byte	= 0; /* unused */
-	vdma2.base_page		= buf->pt[1].dma | ME1;
-
-	vdma3.num_line_byte	= 0; /* unused */
-	vdma3.base_page		= buf->pt[2].dma | ME1;
-
-	switch( sfmt->depth ) {
-		case 12: {
-			calc_planar_420(vv,buf,&vdma2,&vdma3);
-			break;
-		}
-		case 16: {
-			calc_planar_422(vv,buf,&vdma2,&vdma3);
-			break;
-		}
-		default: {
-			return -1;
-		}
-	}
-
-	if (V4L2_FIELD_HAS_BOTH(field)) {
-	} else if (field == V4L2_FIELD_ALTERNATE) {
-		/* fixme */
-		vdma1.base_odd	= vdma1.prot_addr;
-		vdma1.pitch /= 2;
-		vdma2.base_odd	= vdma2.prot_addr;
-		vdma2.pitch /= 2;
-		vdma3.base_odd	= vdma3.prot_addr;
-		vdma3.pitch /= 2;
-	} else if (field == V4L2_FIELD_TOP) {
-		vdma1.base_odd	= vdma1.prot_addr;
-		vdma1.pitch /= 2;
-		vdma2.base_odd	= vdma2.prot_addr;
-		vdma2.pitch /= 2;
-		vdma3.base_odd	= vdma3.prot_addr;
-		vdma3.pitch /= 2;
-	} else if (field == V4L2_FIELD_BOTTOM) {
-		vdma1.base_odd	= vdma1.base_even;
-		vdma1.base_even = vdma1.prot_addr;
-		vdma1.pitch /= 2;
-		vdma2.base_odd	= vdma2.base_even;
-		vdma2.base_even = vdma2.prot_addr;
-		vdma2.pitch /= 2;
-		vdma3.base_odd	= vdma3.base_even;
-		vdma3.base_even = vdma3.prot_addr;
-		vdma3.pitch /= 2;
-	}
-
-	if( 0 != vv->vflip ) {
-		vdma1.pitch *= -1;
-		vdma2.pitch *= -1;
-		vdma3.pitch *= -1;
-	}
-
-	saa7146_write_out_dma(dev, 1, &vdma1);
-	if( (sfmt->flags & FORMAT_BYTE_SWAP) != 0 ) {
-		saa7146_write_out_dma(dev, 3, &vdma2);
-		saa7146_write_out_dma(dev, 2, &vdma3);
-	} else {
-		saa7146_write_out_dma(dev, 2, &vdma2);
-		saa7146_write_out_dma(dev, 3, &vdma3);
-	}
-	return 0;
-}
-
-static void program_capture_engine(struct saa7146_dev *dev, int planar)
-{
-	struct saa7146_vv *vv = dev->vv_data;
-	int count = 0;
-
-	unsigned long e_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_E_FID_A : CMD_E_FID_B;
-	unsigned long o_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_O_FID_A : CMD_O_FID_B;
-
-	/* wait for o_fid_a/b / e_fid_a/b toggle only if rps register 0 is not set*/
-	WRITE_RPS0(CMD_PAUSE | CMD_OAN | CMD_SIG0 | o_wait);
-	WRITE_RPS0(CMD_PAUSE | CMD_OAN | CMD_SIG0 | e_wait);
-
-	/* set rps register 0 */
-	WRITE_RPS0(CMD_WR_REG | (1 << 8) | (MC2/4));
-	WRITE_RPS0(MASK_27 | MASK_11);
-
-	/* turn on video-dma1 */
-	WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
-	WRITE_RPS0(MASK_06 | MASK_22);			/* => mask */
-	WRITE_RPS0(MASK_06 | MASK_22);			/* => values */
-	if( 0 != planar ) {
-		/* turn on video-dma2 */
-		WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
-		WRITE_RPS0(MASK_05 | MASK_21);			/* => mask */
-		WRITE_RPS0(MASK_05 | MASK_21);			/* => values */
-
-		/* turn on video-dma3 */
-		WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
-		WRITE_RPS0(MASK_04 | MASK_20);			/* => mask */
-		WRITE_RPS0(MASK_04 | MASK_20);			/* => values */
-	}
-
-	/* wait for o_fid_a/b / e_fid_a/b toggle */
-	if ( vv->last_field == V4L2_FIELD_INTERLACED ) {
-		WRITE_RPS0(CMD_PAUSE | o_wait);
-		WRITE_RPS0(CMD_PAUSE | e_wait);
-	} else if ( vv->last_field == V4L2_FIELD_TOP ) {
-		WRITE_RPS0(CMD_PAUSE | (vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? MASK_10 : MASK_09));
-		WRITE_RPS0(CMD_PAUSE | o_wait);
-	} else if ( vv->last_field == V4L2_FIELD_BOTTOM ) {
-		WRITE_RPS0(CMD_PAUSE | (vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? MASK_10 : MASK_09));
-		WRITE_RPS0(CMD_PAUSE | e_wait);
-	}
-
-	/* turn off video-dma1 */
-	WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
-	WRITE_RPS0(MASK_22 | MASK_06);			/* => mask */
-	WRITE_RPS0(MASK_22);				/* => values */
-	if( 0 != planar ) {
-		/* turn off video-dma2 */
-		WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
-		WRITE_RPS0(MASK_05 | MASK_21);			/* => mask */
-		WRITE_RPS0(MASK_21);				/* => values */
-
-		/* turn off video-dma3 */
-		WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
-		WRITE_RPS0(MASK_04 | MASK_20);			/* => mask */
-		WRITE_RPS0(MASK_20);				/* => values */
-	}
-
-	/* generate interrupt */
-	WRITE_RPS0(CMD_INTERRUPT);
-
-	/* stop */
-	WRITE_RPS0(CMD_STOP);
-}
-
-void saa7146_set_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next)
-{
-	struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
-	struct saa7146_vv *vv = dev->vv_data;
-	u32 vdma1_prot_addr;
-
-	DEB_CAP("buf:%p, next:%p\n", buf, next);
-
-	vdma1_prot_addr = saa7146_read(dev, PROT_ADDR1);
-	if( 0 == vdma1_prot_addr ) {
-		/* clear out beginning of streaming bit (rps register 0)*/
-		DEB_CAP("forcing sync to new frame\n");
-		saa7146_write(dev, MC2, MASK_27 );
-	}
-
-	saa7146_set_window(dev, buf->fmt->width, buf->fmt->height, buf->fmt->field);
-	saa7146_set_output_format(dev, sfmt->trans);
-	saa7146_disable_clipping(dev);
-
-	if ( vv->last_field == V4L2_FIELD_INTERLACED ) {
-	} else if ( vv->last_field == V4L2_FIELD_TOP ) {
-		vv->last_field = V4L2_FIELD_BOTTOM;
-	} else if ( vv->last_field == V4L2_FIELD_BOTTOM ) {
-		vv->last_field = V4L2_FIELD_TOP;
-	}
-
-	if( 0 != IS_PLANAR(sfmt->trans)) {
-		calculate_video_dma_grab_planar(dev, buf);
-		program_capture_engine(dev,1);
-	} else {
-		calculate_video_dma_grab_packed(dev, buf);
-		program_capture_engine(dev,0);
-	}
-
-/*
-	printk("vdma%d.base_even:     0x%08x\n", 1,saa7146_read(dev,BASE_EVEN1));
-	printk("vdma%d.base_odd:      0x%08x\n", 1,saa7146_read(dev,BASE_ODD1));
-	printk("vdma%d.prot_addr:     0x%08x\n", 1,saa7146_read(dev,PROT_ADDR1));
-	printk("vdma%d.base_page:     0x%08x\n", 1,saa7146_read(dev,BASE_PAGE1));
-	printk("vdma%d.pitch:         0x%08x\n", 1,saa7146_read(dev,PITCH1));
-	printk("vdma%d.num_line_byte: 0x%08x\n", 1,saa7146_read(dev,NUM_LINE_BYTE1));
-	printk("vdma%d => vptr      : 0x%08x\n", 1,saa7146_read(dev,PCI_VDP1));
-*/
-
-	/* write the address of the rps-program */
-	saa7146_write(dev, RPS_ADDR0, dev->d_rps0.dma_handle);
-
-	/* turn on rps */
-	saa7146_write(dev, MC1, (MASK_12 | MASK_28));
-}
diff --git a/drivers/staging/media/deprecated/saa7146/common/saa7146_i2c.c b/drivers/staging/media/deprecated/saa7146/common/saa7146_i2c.c
deleted file mode 100644
index 7a33fe51775a..000000000000
--- a/drivers/staging/media/deprecated/saa7146/common/saa7146_i2c.c
+++ /dev/null
@@ -1,421 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include "saa7146_vv.h"
-
-static u32 saa7146_i2c_func(struct i2c_adapter *adapter)
-{
-	/* DEB_I2C("'%s'\n", adapter->name); */
-
-	return	  I2C_FUNC_I2C
-		| I2C_FUNC_SMBUS_QUICK
-		| I2C_FUNC_SMBUS_READ_BYTE	| I2C_FUNC_SMBUS_WRITE_BYTE
-		| I2C_FUNC_SMBUS_READ_BYTE_DATA | I2C_FUNC_SMBUS_WRITE_BYTE_DATA;
-}
-
-/* this function returns the status-register of our i2c-device */
-static inline u32 saa7146_i2c_status(struct saa7146_dev *dev)
-{
-	u32 iicsta = saa7146_read(dev, I2C_STATUS);
-	/* DEB_I2C("status: 0x%08x\n", iicsta); */
-	return iicsta;
-}
-
-/* this function runs through the i2c-messages and prepares the data to be
-   sent through the saa7146. have a look at the specifications p. 122 ff
-   to understand this. it returns the number of u32s to send, or -1
-   in case of an error. */
-static int saa7146_i2c_msg_prepare(const struct i2c_msg *m, int num, __le32 *op)
-{
-	int h1, h2;
-	int i, j, addr;
-	int mem = 0, op_count = 0;
-
-	/* first determine size of needed memory */
-	for(i = 0; i < num; i++) {
-		mem += m[i].len + 1;
-	}
-
-	/* worst case: we need one u32 for three bytes to be send
-	   plus one extra byte to address the device */
-	mem = 1 + ((mem-1) / 3);
-
-	/* we assume that op points to a memory of at least
-	 * SAA7146_I2C_MEM bytes size. if we exceed this limit...
-	 */
-	if ((4 * mem) > SAA7146_I2C_MEM) {
-		/* DEB_I2C("cannot prepare i2c-message\n"); */
-		return -ENOMEM;
-	}
-
-	/* be careful: clear out the i2c-mem first */
-	memset(op,0,sizeof(__le32)*mem);
-
-	/* loop through all messages */
-	for(i = 0; i < num; i++) {
-
-		addr = i2c_8bit_addr_from_msg(&m[i]);
-		h1 = op_count/3; h2 = op_count%3;
-		op[h1] |= cpu_to_le32(	    (u8)addr << ((3-h2)*8));
-		op[h1] |= cpu_to_le32(SAA7146_I2C_START << ((3-h2)*2));
-		op_count++;
-
-		/* loop through all bytes of message i */
-		for(j = 0; j < m[i].len; j++) {
-			/* insert the data bytes */
-			h1 = op_count/3; h2 = op_count%3;
-			op[h1] |= cpu_to_le32( (u32)((u8)m[i].buf[j]) << ((3-h2)*8));
-			op[h1] |= cpu_to_le32(       SAA7146_I2C_CONT << ((3-h2)*2));
-			op_count++;
-		}
-
-	}
-
-	/* have a look at the last byte inserted:
-	  if it was: ...CONT change it to ...STOP */
-	h1 = (op_count-1)/3; h2 = (op_count-1)%3;
-	if ( SAA7146_I2C_CONT == (0x3 & (le32_to_cpu(op[h1]) >> ((3-h2)*2))) ) {
-		op[h1] &= ~cpu_to_le32(0x2 << ((3-h2)*2));
-		op[h1] |= cpu_to_le32(SAA7146_I2C_STOP << ((3-h2)*2));
-	}
-
-	/* return the number of u32s to send */
-	return mem;
-}
-
-/* this functions loops through all i2c-messages. normally, it should determine
-   which bytes were read through the adapter and write them back to the corresponding
-   i2c-message. but instead, we simply write back all bytes.
-   fixme: this could be improved. */
-static int saa7146_i2c_msg_cleanup(const struct i2c_msg *m, int num, __le32 *op)
-{
-	int i, j;
-	int op_count = 0;
-
-	/* loop through all messages */
-	for(i = 0; i < num; i++) {
-
-		op_count++;
-
-		/* loop through all bytes of message i */
-		for(j = 0; j < m[i].len; j++) {
-			/* write back all bytes that could have been read */
-			m[i].buf[j] = (le32_to_cpu(op[op_count/3]) >> ((3-(op_count%3))*8));
-			op_count++;
-		}
-	}
-
-	return 0;
-}
-
-/* this functions resets the i2c-device and returns 0 if everything was fine, otherwise -1 */
-static int saa7146_i2c_reset(struct saa7146_dev *dev)
-{
-	/* get current status */
-	u32 status = saa7146_i2c_status(dev);
-
-	/* clear registers for sure */
-	saa7146_write(dev, I2C_STATUS, dev->i2c_bitrate);
-	saa7146_write(dev, I2C_TRANSFER, 0);
-
-	/* check if any operation is still in progress */
-	if ( 0 != ( status & SAA7146_I2C_BUSY) ) {
-
-		/* yes, kill ongoing operation */
-		DEB_I2C("busy_state detected\n");
-
-		/* set "ABORT-OPERATION"-bit (bit 7)*/
-		saa7146_write(dev, I2C_STATUS, (dev->i2c_bitrate | MASK_07));
-		saa7146_write(dev, MC2, (MASK_00 | MASK_16));
-		msleep(SAA7146_I2C_DELAY);
-
-		/* clear all error-bits pending; this is needed because p.123, note 1 */
-		saa7146_write(dev, I2C_STATUS, dev->i2c_bitrate);
-		saa7146_write(dev, MC2, (MASK_00 | MASK_16));
-		msleep(SAA7146_I2C_DELAY);
-	}
-
-	/* check if any error is (still) present. (this can be necessary because p.123, note 1) */
-	status = saa7146_i2c_status(dev);
-
-	if ( dev->i2c_bitrate != status ) {
-
-		DEB_I2C("error_state detected. status:0x%08x\n", status);
-
-		/* Repeat the abort operation. This seems to be necessary
-		   after serious protocol errors caused by e.g. the SAA7740 */
-		saa7146_write(dev, I2C_STATUS, (dev->i2c_bitrate | MASK_07));
-		saa7146_write(dev, MC2, (MASK_00 | MASK_16));
-		msleep(SAA7146_I2C_DELAY);
-
-		/* clear all error-bits pending */
-		saa7146_write(dev, I2C_STATUS, dev->i2c_bitrate);
-		saa7146_write(dev, MC2, (MASK_00 | MASK_16));
-		msleep(SAA7146_I2C_DELAY);
-
-		/* the data sheet says it might be necessary to clear the status
-		   twice after an abort */
-		saa7146_write(dev, I2C_STATUS, dev->i2c_bitrate);
-		saa7146_write(dev, MC2, (MASK_00 | MASK_16));
-		msleep(SAA7146_I2C_DELAY);
-	}
-
-	/* if any error is still present, a fatal error has occurred ... */
-	status = saa7146_i2c_status(dev);
-	if ( dev->i2c_bitrate != status ) {
-		DEB_I2C("fatal error. status:0x%08x\n", status);
-		return -1;
-	}
-
-	return 0;
-}
-
-/* this functions writes out the data-byte 'dword' to the i2c-device.
-   it returns 0 if ok, -1 if the transfer failed, -2 if the transfer
-   failed badly (e.g. address error) */
-static int saa7146_i2c_writeout(struct saa7146_dev *dev, __le32 *dword, int short_delay)
-{
-	u32 status = 0, mc2 = 0;
-	int trial = 0;
-	unsigned long timeout;
-
-	/* write out i2c-command */
-	DEB_I2C("before: 0x%08x (status: 0x%08x), %d\n",
-		*dword, saa7146_read(dev, I2C_STATUS), dev->i2c_op);
-
-	if( 0 != (SAA7146_USE_I2C_IRQ & dev->ext->flags)) {
-
-		saa7146_write(dev, I2C_STATUS,	 dev->i2c_bitrate);
-		saa7146_write(dev, I2C_TRANSFER, le32_to_cpu(*dword));
-
-		dev->i2c_op = 1;
-		SAA7146_ISR_CLEAR(dev, MASK_16|MASK_17);
-		SAA7146_IER_ENABLE(dev, MASK_16|MASK_17);
-		saa7146_write(dev, MC2, (MASK_00 | MASK_16));
-
-		timeout = HZ/100 + 1; /* 10ms */
-		timeout = wait_event_interruptible_timeout(dev->i2c_wq, dev->i2c_op == 0, timeout);
-		if (timeout == -ERESTARTSYS || dev->i2c_op) {
-			SAA7146_IER_DISABLE(dev, MASK_16|MASK_17);
-			SAA7146_ISR_CLEAR(dev, MASK_16|MASK_17);
-			if (timeout == -ERESTARTSYS)
-				/* a signal arrived */
-				return -ERESTARTSYS;
-
-			pr_warn("%s %s [irq]: timed out waiting for end of xfer\n",
-				dev->name, __func__);
-			return -EIO;
-		}
-		status = saa7146_read(dev, I2C_STATUS);
-	} else {
-		saa7146_write(dev, I2C_STATUS,	 dev->i2c_bitrate);
-		saa7146_write(dev, I2C_TRANSFER, le32_to_cpu(*dword));
-		saa7146_write(dev, MC2, (MASK_00 | MASK_16));
-
-		/* do not poll for i2c-status before upload is complete */
-		timeout = jiffies + HZ/100 + 1; /* 10ms */
-		while(1) {
-			mc2 = (saa7146_read(dev, MC2) & 0x1);
-			if( 0 != mc2 ) {
-				break;
-			}
-			if (time_after(jiffies,timeout)) {
-				pr_warn("%s %s: timed out waiting for MC2\n",
-					dev->name, __func__);
-				return -EIO;
-			}
-		}
-		/* wait until we get a transfer done or error */
-		timeout = jiffies + HZ/100 + 1; /* 10ms */
-		/* first read usually delivers bogus results... */
-		saa7146_i2c_status(dev);
-		while(1) {
-			status = saa7146_i2c_status(dev);
-			if ((status & 0x3) != 1)
-				break;
-			if (time_after(jiffies,timeout)) {
-				/* this is normal when probing the bus
-				 * (no answer from nonexisistant device...)
-				 */
-				pr_warn("%s %s [poll]: timed out waiting for end of xfer\n",
-					dev->name, __func__);
-				return -EIO;
-			}
-			if (++trial < 50 && short_delay)
-				udelay(10);
-			else
-				msleep(1);
-		}
-	}
-
-	/* give a detailed status report */
-	if ( 0 != (status & (SAA7146_I2C_SPERR | SAA7146_I2C_APERR |
-			     SAA7146_I2C_DTERR | SAA7146_I2C_DRERR |
-			     SAA7146_I2C_AL    | SAA7146_I2C_ERR   |
-			     SAA7146_I2C_BUSY)) ) {
-
-		if ( 0 == (status & SAA7146_I2C_ERR) ||
-		     0 == (status & SAA7146_I2C_BUSY) ) {
-			/* it may take some time until ERR goes high - ignore */
-			DEB_I2C("unexpected i2c status %04x\n", status);
-		}
-		if( 0 != (status & SAA7146_I2C_SPERR) ) {
-			DEB_I2C("error due to invalid start/stop condition\n");
-		}
-		if( 0 != (status & SAA7146_I2C_DTERR) ) {
-			DEB_I2C("error in data transmission\n");
-		}
-		if( 0 != (status & SAA7146_I2C_DRERR) ) {
-			DEB_I2C("error when receiving data\n");
-		}
-		if( 0 != (status & SAA7146_I2C_AL) ) {
-			DEB_I2C("error because arbitration lost\n");
-		}
-
-		/* we handle address-errors here */
-		if( 0 != (status & SAA7146_I2C_APERR) ) {
-			DEB_I2C("error in address phase\n");
-			return -EREMOTEIO;
-		}
-
-		return -EIO;
-	}
-
-	/* read back data, just in case we were reading ... */
-	*dword = cpu_to_le32(saa7146_read(dev, I2C_TRANSFER));
-
-	DEB_I2C("after: 0x%08x\n", *dword);
-	return 0;
-}
-
-static int saa7146_i2c_transfer(struct saa7146_dev *dev, const struct i2c_msg *msgs, int num, int retries)
-{
-	int i = 0, count = 0;
-	__le32 *buffer = dev->d_i2c.cpu_addr;
-	int err = 0;
-	int short_delay = 0;
-
-	if (mutex_lock_interruptible(&dev->i2c_lock))
-		return -ERESTARTSYS;
-
-	for(i=0;i<num;i++) {
-		DEB_I2C("msg:%d/%d\n", i+1, num);
-	}
-
-	/* prepare the message(s), get number of u32s to transfer */
-	count = saa7146_i2c_msg_prepare(msgs, num, buffer);
-	if ( 0 > count ) {
-		err = -EIO;
-		goto out;
-	}
-
-	if ( count > 3 || 0 != (SAA7146_I2C_SHORT_DELAY & dev->ext->flags) )
-		short_delay = 1;
-
-	do {
-		/* reset the i2c-device if necessary */
-		err = saa7146_i2c_reset(dev);
-		if ( 0 > err ) {
-			DEB_I2C("could not reset i2c-device\n");
-			goto out;
-		}
-
-		/* write out the u32s one after another */
-		for(i = 0; i < count; i++) {
-			err = saa7146_i2c_writeout(dev, &buffer[i], short_delay);
-			if ( 0 != err) {
-				/* this one is unsatisfying: some i2c slaves on some
-				   dvb cards don't acknowledge correctly, so the saa7146
-				   thinks that an address error occurred. in that case, the
-				   transaction should be retrying, even if an address error
-				   occurred. analog saa7146 based cards extensively rely on
-				   i2c address probing, however, and address errors indicate that a
-				   device is really *not* there. retrying in that case
-				   increases the time the device needs to probe greatly, so
-				   it should be avoided. So we bail out in irq mode after an
-				   address error and trust the saa7146 address error detection. */
-				if (-EREMOTEIO == err && 0 != (SAA7146_USE_I2C_IRQ & dev->ext->flags))
-					goto out;
-				DEB_I2C("error while sending message(s). starting again\n");
-				break;
-			}
-		}
-		if( 0 == err ) {
-			err = num;
-			break;
-		}
-
-		/* delay a bit before retrying */
-		msleep(10);
-
-	} while (err != num && retries--);
-
-	/* quit if any error occurred */
-	if (err != num)
-		goto out;
-
-	/* if any things had to be read, get the results */
-	if ( 0 != saa7146_i2c_msg_cleanup(msgs, num, buffer)) {
-		DEB_I2C("could not cleanup i2c-message\n");
-		err = -EIO;
-		goto out;
-	}
-
-	/* return the number of delivered messages */
-	DEB_I2C("transmission successful. (msg:%d)\n", err);
-out:
-	/* another bug in revision 0: the i2c-registers get uploaded randomly by other
-	   uploads, so we better clear them out before continuing */
-	if( 0 == dev->revision ) {
-		__le32 zero = 0;
-		saa7146_i2c_reset(dev);
-		if( 0 != saa7146_i2c_writeout(dev, &zero, short_delay)) {
-			pr_info("revision 0 error. this should never happen\n");
-		}
-	}
-
-	mutex_unlock(&dev->i2c_lock);
-	return err;
-}
-
-/* utility functions */
-static int saa7146_i2c_xfer(struct i2c_adapter* adapter, struct i2c_msg *msg, int num)
-{
-	struct v4l2_device *v4l2_dev = i2c_get_adapdata(adapter);
-	struct saa7146_dev *dev = to_saa7146_dev(v4l2_dev);
-
-	/* use helper function to transfer data */
-	return saa7146_i2c_transfer(dev, msg, num, adapter->retries);
-}
-
-
-/*****************************************************************************/
-/* i2c-adapter helper functions                                              */
-
-/* exported algorithm data */
-static const struct i2c_algorithm saa7146_algo = {
-	.master_xfer	= saa7146_i2c_xfer,
-	.functionality	= saa7146_i2c_func,
-};
-
-int saa7146_i2c_adapter_prepare(struct saa7146_dev *dev, struct i2c_adapter *i2c_adapter, u32 bitrate)
-{
-	DEB_EE("bitrate: 0x%08x\n", bitrate);
-
-	/* enable i2c-port pins */
-	saa7146_write(dev, MC1, (MASK_08 | MASK_24));
-
-	dev->i2c_bitrate = bitrate;
-	saa7146_i2c_reset(dev);
-
-	if (i2c_adapter) {
-		i2c_set_adapdata(i2c_adapter, &dev->v4l2_dev);
-		i2c_adapter->dev.parent    = &dev->pci->dev;
-		i2c_adapter->algo	   = &saa7146_algo;
-		i2c_adapter->algo_data     = NULL;
-		i2c_adapter->timeout = SAA7146_I2C_TIMEOUT;
-		i2c_adapter->retries = SAA7146_I2C_RETRIES;
-	}
-
-	return 0;
-}
diff --git a/drivers/staging/media/deprecated/saa7146/common/saa7146_vbi.c b/drivers/staging/media/deprecated/saa7146/common/saa7146_vbi.c
deleted file mode 100644
index 2d4a05d7bc5b..000000000000
--- a/drivers/staging/media/deprecated/saa7146/common/saa7146_vbi.c
+++ /dev/null
@@ -1,498 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "saa7146_vv.h"
-
-static int vbi_pixel_to_capture = 720 * 2;
-
-static int vbi_workaround(struct saa7146_dev *dev)
-{
-	struct saa7146_vv *vv = dev->vv_data;
-
-	u32          *cpu;
-	dma_addr_t   dma_addr;
-
-	int count = 0;
-	int i;
-
-	DECLARE_WAITQUEUE(wait, current);
-
-	DEB_VBI("dev:%p\n", dev);
-
-	/* once again, a bug in the saa7146: the brs acquisition
-	   is buggy and especially the BXO-counter does not work
-	   as specified. there is this workaround, but please
-	   don't let me explain it. ;-) */
-
-	cpu = dma_alloc_coherent(&dev->pci->dev, 4096, &dma_addr, GFP_KERNEL);
-	if (NULL == cpu)
-		return -ENOMEM;
-
-	/* setup some basic programming, just for the workaround */
-	saa7146_write(dev, BASE_EVEN3,	dma_addr);
-	saa7146_write(dev, BASE_ODD3,	dma_addr+vbi_pixel_to_capture);
-	saa7146_write(dev, PROT_ADDR3,	dma_addr+4096);
-	saa7146_write(dev, PITCH3,	vbi_pixel_to_capture);
-	saa7146_write(dev, BASE_PAGE3,	0x0);
-	saa7146_write(dev, NUM_LINE_BYTE3, (2<<16)|((vbi_pixel_to_capture)<<0));
-	saa7146_write(dev, MC2, MASK_04|MASK_20);
-
-	/* load brs-control register */
-	WRITE_RPS1(CMD_WR_REG | (1 << 8) | (BRS_CTRL/4));
-	/* BXO = 1h, BRS to outbound */
-	WRITE_RPS1(0xc000008c);
-	/* wait for vbi_a or vbi_b*/
-	if ( 0 != (SAA7146_USE_PORT_B_FOR_VBI & dev->ext_vv_data->flags)) {
-		DEB_D("...using port b\n");
-		WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | CMD_E_FID_B);
-		WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | CMD_O_FID_B);
-/*
-		WRITE_RPS1(CMD_PAUSE | MASK_09);
-*/
-	} else {
-		DEB_D("...using port a\n");
-		WRITE_RPS1(CMD_PAUSE | MASK_10);
-	}
-	/* upload brs */
-	WRITE_RPS1(CMD_UPLOAD | MASK_08);
-	/* load brs-control register */
-	WRITE_RPS1(CMD_WR_REG | (1 << 8) | (BRS_CTRL/4));
-	/* BYO = 1, BXO = NQBIL (=1728 for PAL, for NTSC this is 858*2) - NumByte3 (=1440) = 288 */
-	WRITE_RPS1(((1728-(vbi_pixel_to_capture)) << 7) | MASK_19);
-	/* wait for brs_done */
-	WRITE_RPS1(CMD_PAUSE | MASK_08);
-	/* upload brs */
-	WRITE_RPS1(CMD_UPLOAD | MASK_08);
-	/* load video-dma3 NumLines3 and NumBytes3 */
-	WRITE_RPS1(CMD_WR_REG | (1 << 8) | (NUM_LINE_BYTE3/4));
-	/* dev->vbi_count*2 lines, 720 pixel (= 1440 Bytes) */
-	WRITE_RPS1((2 << 16) | (vbi_pixel_to_capture));
-	/* load brs-control register */
-	WRITE_RPS1(CMD_WR_REG | (1 << 8) | (BRS_CTRL/4));
-	/* Set BRS right: note: this is an experimental value for BXO (=> PAL!) */
-	WRITE_RPS1((540 << 7) | (5 << 19));  // 5 == vbi_start
-	/* wait for brs_done */
-	WRITE_RPS1(CMD_PAUSE | MASK_08);
-	/* upload brs and video-dma3*/
-	WRITE_RPS1(CMD_UPLOAD | MASK_08 | MASK_04);
-	/* load mc2 register: enable dma3 */
-	WRITE_RPS1(CMD_WR_REG | (1 << 8) | (MC1/4));
-	WRITE_RPS1(MASK_20 | MASK_04);
-	/* generate interrupt */
-	WRITE_RPS1(CMD_INTERRUPT);
-	/* stop rps1 */
-	WRITE_RPS1(CMD_STOP);
-
-	/* we have to do the workaround twice to be sure that
-	   everything is ok */
-	for(i = 0; i < 2; i++) {
-
-		/* indicate to the irq handler that we do the workaround */
-		saa7146_write(dev, MC2, MASK_31|MASK_15);
-
-		saa7146_write(dev, NUM_LINE_BYTE3, (1<<16)|(2<<0));
-		saa7146_write(dev, MC2, MASK_04|MASK_20);
-
-		/* enable rps1 irqs */
-		SAA7146_IER_ENABLE(dev,MASK_28);
-
-		/* prepare to wait to be woken up by the irq-handler */
-		add_wait_queue(&vv->vbi_wq, &wait);
-		set_current_state(TASK_INTERRUPTIBLE);
-
-		/* start rps1 to enable workaround */
-		saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
-		saa7146_write(dev, MC1, (MASK_13 | MASK_29));
-
-		schedule();
-
-		DEB_VBI("brs bug workaround %d/1\n", i);
-
-		remove_wait_queue(&vv->vbi_wq, &wait);
-		__set_current_state(TASK_RUNNING);
-
-		/* disable rps1 irqs */
-		SAA7146_IER_DISABLE(dev,MASK_28);
-
-		/* stop video-dma3 */
-		saa7146_write(dev, MC1, MASK_20);
-
-		if(signal_pending(current)) {
-
-			DEB_VBI("aborted (rps:0x%08x)\n",
-				saa7146_read(dev, RPS_ADDR1));
-
-			/* stop rps1 for sure */
-			saa7146_write(dev, MC1, MASK_29);
-
-			dma_free_coherent(&dev->pci->dev, 4096, cpu, dma_addr);
-			return -EINTR;
-		}
-	}
-
-	dma_free_coherent(&dev->pci->dev, 4096, cpu, dma_addr);
-	return 0;
-}
-
-static void saa7146_set_vbi_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next)
-{
-	struct saa7146_vv *vv = dev->vv_data;
-
-	struct saa7146_video_dma vdma3;
-
-	int count = 0;
-	unsigned long e_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_E_FID_A : CMD_E_FID_B;
-	unsigned long o_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_O_FID_A : CMD_O_FID_B;
-
-/*
-	vdma3.base_even	= 0xc8000000+2560*70;
-	vdma3.base_odd	= 0xc8000000;
-	vdma3.prot_addr	= 0xc8000000+2560*164;
-	vdma3.pitch	= 2560;
-	vdma3.base_page	= 0;
-	vdma3.num_line_byte = (64<<16)|((vbi_pixel_to_capture)<<0); // set above!
-*/
-	vdma3.base_even	= buf->pt[2].offset;
-	vdma3.base_odd	= buf->pt[2].offset + 16 * vbi_pixel_to_capture;
-	vdma3.prot_addr	= buf->pt[2].offset + 16 * 2 * vbi_pixel_to_capture;
-	vdma3.pitch	= vbi_pixel_to_capture;
-	vdma3.base_page	= buf->pt[2].dma | ME1;
-	vdma3.num_line_byte = (16 << 16) | vbi_pixel_to_capture;
-
-	saa7146_write_out_dma(dev, 3, &vdma3);
-
-	/* write beginning of rps-program */
-	count = 0;
-
-	/* wait for o_fid_a/b / e_fid_a/b toggle only if bit 1 is not set */
-
-	/* we don't wait here for the first field anymore. this is different from the video
-	   capture and might cause that the first buffer is only half filled (with only
-	   one field). but since this is some sort of streaming data, this is not that negative.
-	   but by doing this, we can use the whole engine from videobuf-dma-sg.c... */
-
-/*
-	WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | e_wait);
-	WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | o_wait);
-*/
-	/* set bit 1 */
-	WRITE_RPS1(CMD_WR_REG | (1 << 8) | (MC2/4));
-	WRITE_RPS1(MASK_28 | MASK_12);
-
-	/* turn on video-dma3 */
-	WRITE_RPS1(CMD_WR_REG_MASK | (MC1/4));
-	WRITE_RPS1(MASK_04 | MASK_20);			/* => mask */
-	WRITE_RPS1(MASK_04 | MASK_20);			/* => values */
-
-	/* wait for o_fid_a/b / e_fid_a/b toggle */
-	WRITE_RPS1(CMD_PAUSE | o_wait);
-	WRITE_RPS1(CMD_PAUSE | e_wait);
-
-	/* generate interrupt */
-	WRITE_RPS1(CMD_INTERRUPT);
-
-	/* stop */
-	WRITE_RPS1(CMD_STOP);
-
-	/* enable rps1 irqs */
-	SAA7146_IER_ENABLE(dev, MASK_28);
-
-	/* write the address of the rps-program */
-	saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
-
-	/* turn on rps */
-	saa7146_write(dev, MC1, (MASK_13 | MASK_29));
-}
-
-static int buffer_activate(struct saa7146_dev *dev,
-			   struct saa7146_buf *buf,
-			   struct saa7146_buf *next)
-{
-	struct saa7146_vv *vv = dev->vv_data;
-	buf->vb.state = VIDEOBUF_ACTIVE;
-
-	DEB_VBI("dev:%p, buf:%p, next:%p\n", dev, buf, next);
-	saa7146_set_vbi_capture(dev,buf,next);
-
-	mod_timer(&vv->vbi_dmaq.timeout, jiffies+BUFFER_TIMEOUT);
-	return 0;
-}
-
-static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,enum v4l2_field field)
-{
-	struct file *file = q->priv_data;
-	struct saa7146_fh *fh = file->private_data;
-	struct saa7146_dev *dev = fh->dev;
-	struct saa7146_buf *buf = (struct saa7146_buf *)vb;
-
-	int err = 0;
-	int lines, llength, size;
-
-	lines   = 16 * 2 ; /* 2 fields */
-	llength = vbi_pixel_to_capture;
-	size = lines * llength;
-
-	DEB_VBI("vb:%p\n", vb);
-
-	if (0 != buf->vb.baddr  &&  buf->vb.bsize < size) {
-		DEB_VBI("size mismatch\n");
-		return -EINVAL;
-	}
-
-	if (buf->vb.size != size)
-		saa7146_dma_free(dev,q,buf);
-
-	if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
-		struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
-
-		buf->vb.width  = llength;
-		buf->vb.height = lines;
-		buf->vb.size   = size;
-		buf->vb.field  = field;	// FIXME: check this
-
-		saa7146_pgtable_free(dev->pci, &buf->pt[2]);
-		saa7146_pgtable_alloc(dev->pci, &buf->pt[2]);
-
-		err = videobuf_iolock(q,&buf->vb, NULL);
-		if (err)
-			goto oops;
-		err = saa7146_pgtable_build_single(dev->pci, &buf->pt[2],
-						 dma->sglist, dma->sglen);
-		if (0 != err)
-			return err;
-	}
-	buf->vb.state = VIDEOBUF_PREPARED;
-	buf->activate = buffer_activate;
-
-	return 0;
-
- oops:
-	DEB_VBI("error out\n");
-	saa7146_dma_free(dev,q,buf);
-
-	return err;
-}
-
-static int buffer_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size)
-{
-	int llength,lines;
-
-	lines   = 16 * 2 ; /* 2 fields */
-	llength = vbi_pixel_to_capture;
-
-	*size = lines * llength;
-	*count = 2;
-
-	DEB_VBI("count:%d, size:%d\n", *count, *size);
-
-	return 0;
-}
-
-static void buffer_queue(struct videobuf_queue *q, struct videobuf_buffer *vb)
-{
-	struct file *file = q->priv_data;
-	struct saa7146_fh *fh = file->private_data;
-	struct saa7146_dev *dev = fh->dev;
-	struct saa7146_vv *vv = dev->vv_data;
-	struct saa7146_buf *buf = (struct saa7146_buf *)vb;
-
-	DEB_VBI("vb:%p\n", vb);
-	saa7146_buffer_queue(dev, &vv->vbi_dmaq, buf);
-}
-
-static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb)
-{
-	struct file *file = q->priv_data;
-	struct saa7146_fh *fh   = file->private_data;
-	struct saa7146_dev *dev = fh->dev;
-	struct saa7146_buf *buf = (struct saa7146_buf *)vb;
-
-	DEB_VBI("vb:%p\n", vb);
-	saa7146_dma_free(dev,q,buf);
-}
-
-static const struct videobuf_queue_ops vbi_qops = {
-	.buf_setup    = buffer_setup,
-	.buf_prepare  = buffer_prepare,
-	.buf_queue    = buffer_queue,
-	.buf_release  = buffer_release,
-};
-
-/* ------------------------------------------------------------------ */
-
-static void vbi_stop(struct saa7146_fh *fh, struct file *file)
-{
-	struct saa7146_dev *dev = fh->dev;
-	struct saa7146_vv *vv = dev->vv_data;
-	unsigned long flags;
-	DEB_VBI("dev:%p, fh:%p\n", dev, fh);
-
-	spin_lock_irqsave(&dev->slock,flags);
-
-	/* disable rps1  */
-	saa7146_write(dev, MC1, MASK_29);
-
-	/* disable rps1 irqs */
-	SAA7146_IER_DISABLE(dev, MASK_28);
-
-	/* shut down dma 3 transfers */
-	saa7146_write(dev, MC1, MASK_20);
-
-	if (vv->vbi_dmaq.curr)
-		saa7146_buffer_finish(dev, &vv->vbi_dmaq, VIDEOBUF_DONE);
-
-	videobuf_queue_cancel(&fh->vbi_q);
-
-	vv->vbi_streaming = NULL;
-
-	del_timer(&vv->vbi_dmaq.timeout);
-	del_timer(&vv->vbi_read_timeout);
-
-	spin_unlock_irqrestore(&dev->slock, flags);
-}
-
-static void vbi_read_timeout(struct timer_list *t)
-{
-	struct saa7146_vv *vv = from_timer(vv, t, vbi_read_timeout);
-	struct file *file = vv->vbi_read_timeout_file;
-	struct saa7146_fh *fh = file->private_data;
-	struct saa7146_dev *dev = fh->dev;
-
-	DEB_VBI("dev:%p, fh:%p\n", dev, fh);
-
-	vbi_stop(fh, file);
-}
-
-static void vbi_init(struct saa7146_dev *dev, struct saa7146_vv *vv)
-{
-	DEB_VBI("dev:%p\n", dev);
-
-	INIT_LIST_HEAD(&vv->vbi_dmaq.queue);
-
-	timer_setup(&vv->vbi_dmaq.timeout, saa7146_buffer_timeout, 0);
-	vv->vbi_dmaq.dev              = dev;
-
-	init_waitqueue_head(&vv->vbi_wq);
-}
-
-static int vbi_open(struct saa7146_dev *dev, struct file *file)
-{
-	struct saa7146_fh *fh = file->private_data;
-	struct saa7146_vv *vv = fh->dev->vv_data;
-
-	u32 arbtr_ctrl	= saa7146_read(dev, PCI_BT_V1);
-	int ret = 0;
-
-	DEB_VBI("dev:%p, fh:%p\n", dev, fh);
-
-	ret = saa7146_res_get(fh, RESOURCE_DMA3_BRS);
-	if (0 == ret) {
-		DEB_S("cannot get vbi RESOURCE_DMA3_BRS resource\n");
-		return -EBUSY;
-	}
-
-	/* adjust arbitrition control for video dma 3 */
-	arbtr_ctrl &= ~0x1f0000;
-	arbtr_ctrl |=  0x1d0000;
-	saa7146_write(dev, PCI_BT_V1, arbtr_ctrl);
-	saa7146_write(dev, MC2, (MASK_04|MASK_20));
-
-	videobuf_queue_sg_init(&fh->vbi_q, &vbi_qops,
-			    &dev->pci->dev, &dev->slock,
-			    V4L2_BUF_TYPE_VBI_CAPTURE,
-			    V4L2_FIELD_SEQ_TB, // FIXME: does this really work?
-			    sizeof(struct saa7146_buf),
-			    file, &dev->v4l2_lock);
-
-	vv->vbi_read_timeout.function = vbi_read_timeout;
-	vv->vbi_read_timeout_file = file;
-
-	/* initialize the brs */
-	if ( 0 != (SAA7146_USE_PORT_B_FOR_VBI & dev->ext_vv_data->flags)) {
-		saa7146_write(dev, BRS_CTRL, MASK_30|MASK_29 | (7 << 19));
-	} else {
-		saa7146_write(dev, BRS_CTRL, 0x00000001);
-
-		if (0 != (ret = vbi_workaround(dev))) {
-			DEB_VBI("vbi workaround failed!\n");
-			/* return ret;*/
-		}
-	}
-
-	/* upload brs register */
-	saa7146_write(dev, MC2, (MASK_08|MASK_24));
-	return 0;
-}
-
-static void vbi_close(struct saa7146_dev *dev, struct file *file)
-{
-	struct saa7146_fh *fh = file->private_data;
-	struct saa7146_vv *vv = dev->vv_data;
-	DEB_VBI("dev:%p, fh:%p\n", dev, fh);
-
-	if( fh == vv->vbi_streaming ) {
-		vbi_stop(fh, file);
-	}
-	saa7146_res_free(fh, RESOURCE_DMA3_BRS);
-}
-
-static void vbi_irq_done(struct saa7146_dev *dev, unsigned long status)
-{
-	struct saa7146_vv *vv = dev->vv_data;
-	spin_lock(&dev->slock);
-
-	if (vv->vbi_dmaq.curr) {
-		DEB_VBI("dev:%p, curr:%p\n", dev, vv->vbi_dmaq.curr);
-		/* this must be += 2, one count for each field */
-		vv->vbi_fieldcount+=2;
-		vv->vbi_dmaq.curr->vb.field_count = vv->vbi_fieldcount;
-		saa7146_buffer_finish(dev, &vv->vbi_dmaq, VIDEOBUF_DONE);
-	} else {
-		DEB_VBI("dev:%p\n", dev);
-	}
-	saa7146_buffer_next(dev, &vv->vbi_dmaq, 1);
-
-	spin_unlock(&dev->slock);
-}
-
-static ssize_t vbi_read(struct file *file, char __user *data, size_t count, loff_t *ppos)
-{
-	struct saa7146_fh *fh = file->private_data;
-	struct saa7146_dev *dev = fh->dev;
-	struct saa7146_vv *vv = dev->vv_data;
-	ssize_t ret = 0;
-
-	DEB_VBI("dev:%p, fh:%p\n", dev, fh);
-
-	if( NULL == vv->vbi_streaming ) {
-		// fixme: check if dma3 is available
-		// fixme: activate vbi engine here if necessary. (really?)
-		vv->vbi_streaming = fh;
-	}
-
-	if( fh != vv->vbi_streaming ) {
-		DEB_VBI("open %p is already using vbi capture\n",
-			vv->vbi_streaming);
-		return -EBUSY;
-	}
-
-	mod_timer(&vv->vbi_read_timeout, jiffies+BUFFER_TIMEOUT);
-	ret = videobuf_read_stream(&fh->vbi_q, data, count, ppos, 1,
-				   file->f_flags & O_NONBLOCK);
-/*
-	printk("BASE_ODD3:      0x%08x\n", saa7146_read(dev, BASE_ODD3));
-	printk("BASE_EVEN3:     0x%08x\n", saa7146_read(dev, BASE_EVEN3));
-	printk("PROT_ADDR3:     0x%08x\n", saa7146_read(dev, PROT_ADDR3));
-	printk("PITCH3:         0x%08x\n", saa7146_read(dev, PITCH3));
-	printk("BASE_PAGE3:     0x%08x\n", saa7146_read(dev, BASE_PAGE3));
-	printk("NUM_LINE_BYTE3: 0x%08x\n", saa7146_read(dev, NUM_LINE_BYTE3));
-	printk("BRS_CTRL:       0x%08x\n", saa7146_read(dev, BRS_CTRL));
-*/
-	return ret;
-}
-
-const struct saa7146_use_ops saa7146_vbi_uops = {
-	.init		= vbi_init,
-	.open		= vbi_open,
-	.release	= vbi_close,
-	.irq_done	= vbi_irq_done,
-	.read		= vbi_read,
-};
diff --git a/drivers/staging/media/deprecated/saa7146/common/saa7146_video.c b/drivers/staging/media/deprecated/saa7146/common/saa7146_video.c
deleted file mode 100644
index 4598a44231fa..000000000000
--- a/drivers/staging/media/deprecated/saa7146/common/saa7146_video.c
+++ /dev/null
@@ -1,1286 +0,0 @@
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <media/v4l2-event.h>
-#include <media/v4l2-ctrls.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include "saa7146_vv.h"
-
-static int max_memory = 32;
-
-module_param(max_memory, int, 0644);
-MODULE_PARM_DESC(max_memory, "maximum memory usage for capture buffers (default: 32Mb)");
-
-#define IS_CAPTURE_ACTIVE(fh) \
-	(((vv->video_status & STATUS_CAPTURE) != 0) && (vv->video_fh == fh))
-
-#define IS_OVERLAY_ACTIVE(fh) \
-	(((vv->video_status & STATUS_OVERLAY) != 0) && (vv->video_fh == fh))
-
-/* format descriptions for capture and preview */
-static struct saa7146_format formats[] = {
-	{
-		.pixelformat	= V4L2_PIX_FMT_RGB332,
-		.trans		= RGB08_COMPOSED,
-		.depth		= 8,
-		.flags		= 0,
-	}, {
-		.pixelformat	= V4L2_PIX_FMT_RGB565,
-		.trans		= RGB16_COMPOSED,
-		.depth		= 16,
-		.flags		= 0,
-	}, {
-		.pixelformat	= V4L2_PIX_FMT_BGR24,
-		.trans		= RGB24_COMPOSED,
-		.depth		= 24,
-		.flags		= 0,
-	}, {
-		.pixelformat	= V4L2_PIX_FMT_BGR32,
-		.trans		= RGB32_COMPOSED,
-		.depth		= 32,
-		.flags		= 0,
-	}, {
-		.pixelformat	= V4L2_PIX_FMT_RGB32,
-		.trans		= RGB32_COMPOSED,
-		.depth		= 32,
-		.flags		= 0,
-		.swap		= 0x2,
-	}, {
-		.pixelformat	= V4L2_PIX_FMT_GREY,
-		.trans		= Y8,
-		.depth		= 8,
-		.flags		= 0,
-	}, {
-		.pixelformat	= V4L2_PIX_FMT_YUV422P,
-		.trans		= YUV422_DECOMPOSED,
-		.depth		= 16,
-		.flags		= FORMAT_BYTE_SWAP|FORMAT_IS_PLANAR,
-	}, {
-		.pixelformat	= V4L2_PIX_FMT_YVU420,
-		.trans		= YUV420_DECOMPOSED,
-		.depth		= 12,
-		.flags		= FORMAT_BYTE_SWAP|FORMAT_IS_PLANAR,
-	}, {
-		.pixelformat	= V4L2_PIX_FMT_YUV420,
-		.trans		= YUV420_DECOMPOSED,
-		.depth		= 12,
-		.flags		= FORMAT_IS_PLANAR,
-	}, {
-		.pixelformat	= V4L2_PIX_FMT_UYVY,
-		.trans		= YUV422_COMPOSED,
-		.depth		= 16,
-		.flags		= 0,
-	}
-};
-
-/* unfortunately, the saa7146 contains a bug which prevents it from doing on-the-fly byte swaps.
-   due to this, it's impossible to provide additional *packed* formats, which are simply byte swapped
-   (like V4L2_PIX_FMT_YUYV) ... 8-( */
-
-struct saa7146_format* saa7146_format_by_fourcc(struct saa7146_dev *dev, int fourcc)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(formats); i++) {
-		if (formats[i].pixelformat == fourcc) {
-			return formats+i;
-		}
-	}
-
-	DEB_D("unknown pixelformat:'%4.4s'\n", (char *)&fourcc);
-	return NULL;
-}
-
-static int vidioc_try_fmt_vid_overlay(struct file *file, void *fh, struct v4l2_format *f);
-
-int saa7146_start_preview(struct saa7146_fh *fh)
-{
-	struct saa7146_dev *dev = fh->dev;
-	struct saa7146_vv *vv = dev->vv_data;
-	struct v4l2_format fmt;
-	int ret = 0, err = 0;
-
-	DEB_EE("dev:%p, fh:%p\n", dev, fh);
-
-	/* check if we have overlay information */
-	if (vv->ov.fh == NULL) {
-		DEB_D("no overlay data available. try S_FMT first.\n");
-		return -EAGAIN;
-	}
-
-	/* check if streaming capture is running */
-	if (IS_CAPTURE_ACTIVE(fh) != 0) {
-		DEB_D("streaming capture is active\n");
-		return -EBUSY;
-	}
-
-	/* check if overlay is running */
-	if (IS_OVERLAY_ACTIVE(fh) != 0) {
-		if (vv->video_fh == fh) {
-			DEB_D("overlay is already active\n");
-			return 0;
-		}
-		DEB_D("overlay is already active in another open\n");
-		return -EBUSY;
-	}
-
-	if (0 == saa7146_res_get(fh, RESOURCE_DMA1_HPS|RESOURCE_DMA2_CLP)) {
-		DEB_D("cannot get necessary overlay resources\n");
-		return -EBUSY;
-	}
-
-	fmt.fmt.win = vv->ov.win;
-	err = vidioc_try_fmt_vid_overlay(NULL, fh, &fmt);
-	if (0 != err) {
-		saa7146_res_free(vv->video_fh, RESOURCE_DMA1_HPS|RESOURCE_DMA2_CLP);
-		return -EBUSY;
-	}
-	vv->ov.win = fmt.fmt.win;
-
-	DEB_D("%dx%d+%d+%d 0x%08x field=%s\n",
-	      vv->ov.win.w.width, vv->ov.win.w.height,
-	      vv->ov.win.w.left, vv->ov.win.w.top,
-	      vv->ov_fmt->pixelformat, v4l2_field_names[vv->ov.win.field]);
-
-	if (0 != (ret = saa7146_enable_overlay(fh))) {
-		DEB_D("enabling overlay failed: %d\n", ret);
-		saa7146_res_free(vv->video_fh, RESOURCE_DMA1_HPS|RESOURCE_DMA2_CLP);
-		return ret;
-	}
-
-	vv->video_status = STATUS_OVERLAY;
-	vv->video_fh = fh;
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(saa7146_start_preview);
-
-int saa7146_stop_preview(struct saa7146_fh *fh)
-{
-	struct saa7146_dev *dev = fh->dev;
-	struct saa7146_vv *vv = dev->vv_data;
-
-	DEB_EE("dev:%p, fh:%p\n", dev, fh);
-
-	/* check if streaming capture is running */
-	if (IS_CAPTURE_ACTIVE(fh) != 0) {
-		DEB_D("streaming capture is active\n");
-		return -EBUSY;
-	}
-
-	/* check if overlay is running at all */
-	if ((vv->video_status & STATUS_OVERLAY) == 0) {
-		DEB_D("no active overlay\n");
-		return 0;
-	}
-
-	if (vv->video_fh != fh) {
-		DEB_D("overlay is active, but in another open\n");
-		return -EBUSY;
-	}
-
-	vv->video_status = 0;
-	vv->video_fh = NULL;
-
-	saa7146_disable_overlay(fh);
-
-	saa7146_res_free(fh, RESOURCE_DMA1_HPS|RESOURCE_DMA2_CLP);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(saa7146_stop_preview);
-
-/********************************************************************************/
-/* common pagetable functions */
-
-static int saa7146_pgtable_build(struct saa7146_dev *dev, struct saa7146_buf *buf)
-{
-	struct pci_dev *pci = dev->pci;
-	struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
-	struct scatterlist *list = dma->sglist;
-	int length = dma->sglen;
-	struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
-
-	DEB_EE("dev:%p, buf:%p, sg_len:%d\n", dev, buf, length);
-
-	if( 0 != IS_PLANAR(sfmt->trans)) {
-		struct saa7146_pgtable *pt1 = &buf->pt[0];
-		struct saa7146_pgtable *pt2 = &buf->pt[1];
-		struct saa7146_pgtable *pt3 = &buf->pt[2];
-		__le32  *ptr1, *ptr2, *ptr3;
-		__le32 fill;
-
-		int size = buf->fmt->width*buf->fmt->height;
-		int i,p,m1,m2,m3,o1,o2;
-
-		switch( sfmt->depth ) {
-			case 12: {
-				/* create some offsets inside the page table */
-				m1 = ((size+PAGE_SIZE)/PAGE_SIZE)-1;
-				m2 = ((size+(size/4)+PAGE_SIZE)/PAGE_SIZE)-1;
-				m3 = ((size+(size/2)+PAGE_SIZE)/PAGE_SIZE)-1;
-				o1 = size%PAGE_SIZE;
-				o2 = (size+(size/4))%PAGE_SIZE;
-				DEB_CAP("size:%d, m1:%d, m2:%d, m3:%d, o1:%d, o2:%d\n",
-					size, m1, m2, m3, o1, o2);
-				break;
-			}
-			case 16: {
-				/* create some offsets inside the page table */
-				m1 = ((size+PAGE_SIZE)/PAGE_SIZE)-1;
-				m2 = ((size+(size/2)+PAGE_SIZE)/PAGE_SIZE)-1;
-				m3 = ((2*size+PAGE_SIZE)/PAGE_SIZE)-1;
-				o1 = size%PAGE_SIZE;
-				o2 = (size+(size/2))%PAGE_SIZE;
-				DEB_CAP("size:%d, m1:%d, m2:%d, m3:%d, o1:%d, o2:%d\n",
-					size, m1, m2, m3, o1, o2);
-				break;
-			}
-			default: {
-				return -1;
-			}
-		}
-
-		ptr1 = pt1->cpu;
-		ptr2 = pt2->cpu;
-		ptr3 = pt3->cpu;
-
-		/* walk all pages, copy all page addresses to ptr1 */
-		for (i = 0; i < length; i++, list++) {
-			for (p = 0; p * 4096 < sg_dma_len(list); p++, ptr1++)
-				*ptr1 = cpu_to_le32(sg_dma_address(list) - list->offset);
-		}
-/*
-		ptr1 = pt1->cpu;
-		for(j=0;j<40;j++) {
-			printk("ptr1 %d: 0x%08x\n",j,ptr1[j]);
-		}
-*/
-
-		/* if we have a user buffer, the first page may not be
-		   aligned to a page boundary. */
-		pt1->offset = dma->sglist->offset;
-		pt2->offset = pt1->offset+o1;
-		pt3->offset = pt1->offset+o2;
-
-		/* create video-dma2 page table */
-		ptr1 = pt1->cpu;
-		for(i = m1; i <= m2 ; i++, ptr2++) {
-			*ptr2 = ptr1[i];
-		}
-		fill = *(ptr2-1);
-		for(;i<1024;i++,ptr2++) {
-			*ptr2 = fill;
-		}
-		/* create video-dma3 page table */
-		ptr1 = pt1->cpu;
-		for(i = m2; i <= m3; i++,ptr3++) {
-			*ptr3 = ptr1[i];
-		}
-		fill = *(ptr3-1);
-		for(;i<1024;i++,ptr3++) {
-			*ptr3 = fill;
-		}
-		/* finally: finish up video-dma1 page table */
-		ptr1 = pt1->cpu+m1;
-		fill = pt1->cpu[m1];
-		for(i=m1;i<1024;i++,ptr1++) {
-			*ptr1 = fill;
-		}
-/*
-		ptr1 = pt1->cpu;
-		ptr2 = pt2->cpu;
-		ptr3 = pt3->cpu;
-		for(j=0;j<40;j++) {
-			printk("ptr1 %d: 0x%08x\n",j,ptr1[j]);
-		}
-		for(j=0;j<40;j++) {
-			printk("ptr2 %d: 0x%08x\n",j,ptr2[j]);
-		}
-		for(j=0;j<40;j++) {
-			printk("ptr3 %d: 0x%08x\n",j,ptr3[j]);
-		}
-*/
-	} else {
-		struct saa7146_pgtable *pt = &buf->pt[0];
-		return saa7146_pgtable_build_single(pci, pt, list, length);
-	}
-
-	return 0;
-}
-
-
-/********************************************************************************/
-/* file operations */
-
-static int video_begin(struct saa7146_fh *fh)
-{
-	struct saa7146_dev *dev = fh->dev;
-	struct saa7146_vv *vv = dev->vv_data;
-	struct saa7146_format *fmt = NULL;
-	unsigned int resource;
-	int ret = 0, err = 0;
-
-	DEB_EE("dev:%p, fh:%p\n", dev, fh);
-
-	if ((vv->video_status & STATUS_CAPTURE) != 0) {
-		if (vv->video_fh == fh) {
-			DEB_S("already capturing\n");
-			return 0;
-		}
-		DEB_S("already capturing in another open\n");
-		return -EBUSY;
-	}
-
-	if ((vv->video_status & STATUS_OVERLAY) != 0) {
-		DEB_S("warning: suspending overlay video for streaming capture\n");
-		vv->ov_suspend = vv->video_fh;
-		err = saa7146_stop_preview(vv->video_fh); /* side effect: video_status is now 0, video_fh is NULL */
-		if (0 != err) {
-			DEB_D("suspending video failed. aborting\n");
-			return err;
-		}
-	}
-
-	fmt = saa7146_format_by_fourcc(dev, vv->video_fmt.pixelformat);
-	/* we need to have a valid format set here */
-	if (!fmt)
-		return -EINVAL;
-
-	if (0 != (fmt->flags & FORMAT_IS_PLANAR)) {
-		resource = RESOURCE_DMA1_HPS|RESOURCE_DMA2_CLP|RESOURCE_DMA3_BRS;
-	} else {
-		resource = RESOURCE_DMA1_HPS;
-	}
-
-	ret = saa7146_res_get(fh, resource);
-	if (0 == ret) {
-		DEB_S("cannot get capture resource %d\n", resource);
-		if (vv->ov_suspend != NULL) {
-			saa7146_start_preview(vv->ov_suspend);
-			vv->ov_suspend = NULL;
-		}
-		return -EBUSY;
-	}
-
-	/* clear out beginning of streaming bit (rps register 0)*/
-	saa7146_write(dev, MC2, MASK_27 );
-
-	/* enable rps0 irqs */
-	SAA7146_IER_ENABLE(dev, MASK_27);
-
-	vv->video_fh = fh;
-	vv->video_status = STATUS_CAPTURE;
-
-	return 0;
-}
-
-static int video_end(struct saa7146_fh *fh, struct file *file)
-{
-	struct saa7146_dev *dev = fh->dev;
-	struct saa7146_vv *vv = dev->vv_data;
-	struct saa7146_dmaqueue *q = &vv->video_dmaq;
-	struct saa7146_format *fmt = NULL;
-	unsigned long flags;
-	unsigned int resource;
-	u32 dmas = 0;
-	DEB_EE("dev:%p, fh:%p\n", dev, fh);
-
-	if ((vv->video_status & STATUS_CAPTURE) != STATUS_CAPTURE) {
-		DEB_S("not capturing\n");
-		return 0;
-	}
-
-	if (vv->video_fh != fh) {
-		DEB_S("capturing, but in another open\n");
-		return -EBUSY;
-	}
-
-	fmt = saa7146_format_by_fourcc(dev, vv->video_fmt.pixelformat);
-	/* we need to have a valid format set here */
-	if (!fmt)
-		return -EINVAL;
-
-	if (0 != (fmt->flags & FORMAT_IS_PLANAR)) {
-		resource = RESOURCE_DMA1_HPS|RESOURCE_DMA2_CLP|RESOURCE_DMA3_BRS;
-		dmas = MASK_22 | MASK_21 | MASK_20;
-	} else {
-		resource = RESOURCE_DMA1_HPS;
-		dmas = MASK_22;
-	}
-	spin_lock_irqsave(&dev->slock,flags);
-
-	/* disable rps0  */
-	saa7146_write(dev, MC1, MASK_28);
-
-	/* disable rps0 irqs */
-	SAA7146_IER_DISABLE(dev, MASK_27);
-
-	/* shut down all used video dma transfers */
-	saa7146_write(dev, MC1, dmas);
-
-	if (q->curr)
-		saa7146_buffer_finish(dev, q, VIDEOBUF_DONE);
-
-	spin_unlock_irqrestore(&dev->slock, flags);
-
-	vv->video_fh = NULL;
-	vv->video_status = 0;
-
-	saa7146_res_free(fh, resource);
-
-	if (vv->ov_suspend != NULL) {
-		saa7146_start_preview(vv->ov_suspend);
-		vv->ov_suspend = NULL;
-	}
-
-	return 0;
-}
-
-static int vidioc_querycap(struct file *file, void *fh, struct v4l2_capability *cap)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-
-	strscpy((char *)cap->driver, "saa7146 v4l2", sizeof(cap->driver));
-	strscpy((char *)cap->card, dev->ext->name, sizeof(cap->card));
-	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OVERLAY |
-			    V4L2_CAP_READWRITE | V4L2_CAP_STREAMING |
-			    V4L2_CAP_DEVICE_CAPS;
-	cap->capabilities |= dev->ext_vv_data->capabilities;
-	return 0;
-}
-
-static int vidioc_g_fbuf(struct file *file, void *fh, struct v4l2_framebuffer *fb)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-	struct saa7146_vv *vv = dev->vv_data;
-
-	*fb = vv->ov_fb;
-	fb->capability = V4L2_FBUF_CAP_LIST_CLIPPING;
-	fb->flags = V4L2_FBUF_FLAG_PRIMARY;
-	return 0;
-}
-
-static int vidioc_s_fbuf(struct file *file, void *fh, const struct v4l2_framebuffer *fb)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-	struct saa7146_vv *vv = dev->vv_data;
-	struct saa7146_format *fmt;
-
-	DEB_EE("VIDIOC_S_FBUF\n");
-
-	if (!capable(CAP_SYS_ADMIN) && !capable(CAP_SYS_RAWIO))
-		return -EPERM;
-
-	/* check args */
-	fmt = saa7146_format_by_fourcc(dev, fb->fmt.pixelformat);
-	if (NULL == fmt)
-		return -EINVAL;
-
-	/* planar formats are not allowed for overlay video, clipping and video dma would clash */
-	if (fmt->flags & FORMAT_IS_PLANAR)
-		DEB_S("planar pixelformat '%4.4s' not allowed for overlay\n",
-		      (char *)&fmt->pixelformat);
-
-	/* check if overlay is running */
-	if (IS_OVERLAY_ACTIVE(fh) != 0) {
-		if (vv->video_fh != fh) {
-			DEB_D("refusing to change framebuffer information while overlay is active in another open\n");
-			return -EBUSY;
-		}
-	}
-
-	/* ok, accept it */
-	vv->ov_fb = *fb;
-	vv->ov_fmt = fmt;
-
-	if (vv->ov_fb.fmt.bytesperline < vv->ov_fb.fmt.width) {
-		vv->ov_fb.fmt.bytesperline = vv->ov_fb.fmt.width * fmt->depth / 8;
-		DEB_D("setting bytesperline to %d\n", vv->ov_fb.fmt.bytesperline);
-	}
-	return 0;
-}
-
-static int vidioc_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdesc *f)
-{
-	if (f->index >= ARRAY_SIZE(formats))
-		return -EINVAL;
-	f->pixelformat = formats[f->index].pixelformat;
-	return 0;
-}
-
-int saa7146_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct saa7146_dev *dev = container_of(ctrl->handler,
-				struct saa7146_dev, ctrl_handler);
-	struct saa7146_vv *vv = dev->vv_data;
-	u32 val;
-
-	switch (ctrl->id) {
-	case V4L2_CID_BRIGHTNESS:
-		val = saa7146_read(dev, BCS_CTRL);
-		val &= 0x00ffffff;
-		val |= (ctrl->val << 24);
-		saa7146_write(dev, BCS_CTRL, val);
-		saa7146_write(dev, MC2, MASK_22 | MASK_06);
-		break;
-
-	case V4L2_CID_CONTRAST:
-		val = saa7146_read(dev, BCS_CTRL);
-		val &= 0xff00ffff;
-		val |= (ctrl->val << 16);
-		saa7146_write(dev, BCS_CTRL, val);
-		saa7146_write(dev, MC2, MASK_22 | MASK_06);
-		break;
-
-	case V4L2_CID_SATURATION:
-		val = saa7146_read(dev, BCS_CTRL);
-		val &= 0xffffff00;
-		val |= (ctrl->val << 0);
-		saa7146_write(dev, BCS_CTRL, val);
-		saa7146_write(dev, MC2, MASK_22 | MASK_06);
-		break;
-
-	case V4L2_CID_HFLIP:
-		/* fixme: we can support changing VFLIP and HFLIP here... */
-		if ((vv->video_status & STATUS_CAPTURE))
-			return -EBUSY;
-		vv->hflip = ctrl->val;
-		break;
-
-	case V4L2_CID_VFLIP:
-		if ((vv->video_status & STATUS_CAPTURE))
-			return -EBUSY;
-		vv->vflip = ctrl->val;
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	if ((vv->video_status & STATUS_OVERLAY) != 0) { /* CHECK: && (vv->video_fh == fh)) */
-		struct saa7146_fh *fh = vv->video_fh;
-
-		saa7146_stop_preview(fh);
-		saa7146_start_preview(fh);
-	}
-	return 0;
-}
-
-static int vidioc_g_parm(struct file *file, void *fh,
-		struct v4l2_streamparm *parm)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-	struct saa7146_vv *vv = dev->vv_data;
-
-	if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-	parm->parm.capture.readbuffers = 1;
-	v4l2_video_std_frame_period(vv->standard->id,
-				    &parm->parm.capture.timeperframe);
-	return 0;
-}
-
-static int vidioc_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-	struct saa7146_vv *vv = dev->vv_data;
-
-	f->fmt.pix = vv->video_fmt;
-	return 0;
-}
-
-static int vidioc_g_fmt_vid_overlay(struct file *file, void *fh, struct v4l2_format *f)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-	struct saa7146_vv *vv = dev->vv_data;
-
-	f->fmt.win = vv->ov.win;
-	return 0;
-}
-
-static int vidioc_g_fmt_vbi_cap(struct file *file, void *fh, struct v4l2_format *f)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-	struct saa7146_vv *vv = dev->vv_data;
-
-	f->fmt.vbi = vv->vbi_fmt;
-	return 0;
-}
-
-static int vidioc_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-	struct saa7146_vv *vv = dev->vv_data;
-	struct saa7146_format *fmt;
-	enum v4l2_field field;
-	int maxw, maxh;
-	int calc_bpl;
-
-	DEB_EE("V4L2_BUF_TYPE_VIDEO_CAPTURE: dev:%p, fh:%p\n", dev, fh);
-
-	fmt = saa7146_format_by_fourcc(dev, f->fmt.pix.pixelformat);
-	if (NULL == fmt)
-		return -EINVAL;
-
-	field = f->fmt.pix.field;
-	maxw  = vv->standard->h_max_out;
-	maxh  = vv->standard->v_max_out;
-
-	if (V4L2_FIELD_ANY == field) {
-		field = (f->fmt.pix.height > maxh / 2)
-			? V4L2_FIELD_INTERLACED
-			: V4L2_FIELD_BOTTOM;
-	}
-	switch (field) {
-	case V4L2_FIELD_ALTERNATE:
-		vv->last_field = V4L2_FIELD_TOP;
-		maxh = maxh / 2;
-		break;
-	case V4L2_FIELD_TOP:
-	case V4L2_FIELD_BOTTOM:
-		vv->last_field = V4L2_FIELD_INTERLACED;
-		maxh = maxh / 2;
-		break;
-	case V4L2_FIELD_INTERLACED:
-		vv->last_field = V4L2_FIELD_INTERLACED;
-		break;
-	default:
-		DEB_D("no known field mode '%d'\n", field);
-		return -EINVAL;
-	}
-
-	f->fmt.pix.field = field;
-	f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
-	if (f->fmt.pix.width > maxw)
-		f->fmt.pix.width = maxw;
-	if (f->fmt.pix.height > maxh)
-		f->fmt.pix.height = maxh;
-
-	calc_bpl = (f->fmt.pix.width * fmt->depth) / 8;
-
-	if (f->fmt.pix.bytesperline < calc_bpl)
-		f->fmt.pix.bytesperline = calc_bpl;
-
-	if (f->fmt.pix.bytesperline > (2 * PAGE_SIZE * fmt->depth) / 8) /* arbitrary constraint */
-		f->fmt.pix.bytesperline = calc_bpl;
-
-	f->fmt.pix.sizeimage = f->fmt.pix.bytesperline * f->fmt.pix.height;
-	DEB_D("w:%d, h:%d, bytesperline:%d, sizeimage:%d\n",
-	      f->fmt.pix.width, f->fmt.pix.height,
-	      f->fmt.pix.bytesperline, f->fmt.pix.sizeimage);
-
-	return 0;
-}
-
-
-static int vidioc_try_fmt_vid_overlay(struct file *file, void *fh, struct v4l2_format *f)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-	struct saa7146_vv *vv = dev->vv_data;
-	struct v4l2_window *win = &f->fmt.win;
-	enum v4l2_field field;
-	int maxw, maxh;
-
-	DEB_EE("dev:%p\n", dev);
-
-	if (NULL == vv->ov_fb.base) {
-		DEB_D("no fb base set\n");
-		return -EINVAL;
-	}
-	if (NULL == vv->ov_fmt) {
-		DEB_D("no fb fmt set\n");
-		return -EINVAL;
-	}
-	if (win->w.width < 48 || win->w.height < 32) {
-		DEB_D("min width/height. (%d,%d)\n",
-		      win->w.width, win->w.height);
-		return -EINVAL;
-	}
-	if (win->clipcount > 16) {
-		DEB_D("clipcount too big\n");
-		return -EINVAL;
-	}
-
-	field = win->field;
-	maxw  = vv->standard->h_max_out;
-	maxh  = vv->standard->v_max_out;
-
-	if (V4L2_FIELD_ANY == field) {
-		field = (win->w.height > maxh / 2)
-			? V4L2_FIELD_INTERLACED
-			: V4L2_FIELD_TOP;
-		}
-	switch (field) {
-	case V4L2_FIELD_TOP:
-	case V4L2_FIELD_BOTTOM:
-	case V4L2_FIELD_ALTERNATE:
-		maxh = maxh / 2;
-		break;
-	case V4L2_FIELD_INTERLACED:
-		break;
-	default:
-		DEB_D("no known field mode '%d'\n", field);
-		return -EINVAL;
-	}
-
-	win->field = field;
-	if (win->w.width > maxw)
-		win->w.width = maxw;
-	if (win->w.height > maxh)
-		win->w.height = maxh;
-
-	return 0;
-}
-
-static int vidioc_s_fmt_vid_cap(struct file *file, void *__fh, struct v4l2_format *f)
-{
-	struct saa7146_fh *fh = __fh;
-	struct saa7146_dev *dev = fh->dev;
-	struct saa7146_vv *vv = dev->vv_data;
-	int err;
-
-	DEB_EE("V4L2_BUF_TYPE_VIDEO_CAPTURE: dev:%p, fh:%p\n", dev, fh);
-	if (IS_CAPTURE_ACTIVE(fh) != 0) {
-		DEB_EE("streaming capture is active\n");
-		return -EBUSY;
-	}
-	err = vidioc_try_fmt_vid_cap(file, fh, f);
-	if (0 != err)
-		return err;
-	vv->video_fmt = f->fmt.pix;
-	DEB_EE("set to pixelformat '%4.4s'\n",
-	       (char *)&vv->video_fmt.pixelformat);
-	return 0;
-}
-
-static int vidioc_s_fmt_vid_overlay(struct file *file, void *__fh, struct v4l2_format *f)
-{
-	struct saa7146_fh *fh = __fh;
-	struct saa7146_dev *dev = fh->dev;
-	struct saa7146_vv *vv = dev->vv_data;
-	int err;
-
-	DEB_EE("V4L2_BUF_TYPE_VIDEO_OVERLAY: dev:%p, fh:%p\n", dev, fh);
-	err = vidioc_try_fmt_vid_overlay(file, fh, f);
-	if (0 != err)
-		return err;
-	vv->ov.win    = f->fmt.win;
-	vv->ov.nclips = f->fmt.win.clipcount;
-	if (vv->ov.nclips > 16)
-		vv->ov.nclips = 16;
-	memcpy(vv->ov.clips, f->fmt.win.clips,
-	       sizeof(struct v4l2_clip) * vv->ov.nclips);
-
-	/* vv->ov.fh is used to indicate that we have valid overlay information, too */
-	vv->ov.fh = fh;
-
-	/* check if our current overlay is active */
-	if (IS_OVERLAY_ACTIVE(fh) != 0) {
-		saa7146_stop_preview(fh);
-		saa7146_start_preview(fh);
-	}
-	return 0;
-}
-
-static int vidioc_g_std(struct file *file, void *fh, v4l2_std_id *norm)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-	struct saa7146_vv *vv = dev->vv_data;
-
-	*norm = vv->standard->id;
-	return 0;
-}
-
-	/* the saa7146 supfhrts (used in conjunction with the saa7111a for example)
-	   PAL / NTSC / SECAM. if your hardware does not (or does more)
-	   -- override this function in your extension */
-/*
-	case VIDIOC_ENUMSTD:
-	{
-		struct v4l2_standard *e = arg;
-		if (e->index < 0 )
-			return -EINVAL;
-		if( e->index < dev->ext_vv_data->num_stds ) {
-			DEB_EE("VIDIOC_ENUMSTD: index:%d\n", e->index);
-			v4l2_video_std_construct(e, dev->ext_vv_data->stds[e->index].id, dev->ext_vv_data->stds[e->index].name);
-			return 0;
-		}
-		return -EINVAL;
-	}
-	*/
-
-static int vidioc_s_std(struct file *file, void *fh, v4l2_std_id id)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-	struct saa7146_vv *vv = dev->vv_data;
-	int found = 0;
-	int err, i;
-
-	DEB_EE("VIDIOC_S_STD\n");
-
-	if ((vv->video_status & STATUS_CAPTURE) == STATUS_CAPTURE) {
-		DEB_D("cannot change video standard while streaming capture is active\n");
-		return -EBUSY;
-	}
-
-	if ((vv->video_status & STATUS_OVERLAY) != 0) {
-		vv->ov_suspend = vv->video_fh;
-		err = saa7146_stop_preview(vv->video_fh); /* side effect: video_status is now 0, video_fh is NULL */
-		if (0 != err) {
-			DEB_D("suspending video failed. aborting\n");
-			return err;
-		}
-	}
-
-	for (i = 0; i < dev->ext_vv_data->num_stds; i++)
-		if (id & dev->ext_vv_data->stds[i].id)
-			break;
-	if (i != dev->ext_vv_data->num_stds) {
-		vv->standard = &dev->ext_vv_data->stds[i];
-		if (NULL != dev->ext_vv_data->std_callback)
-			dev->ext_vv_data->std_callback(dev, vv->standard);
-		found = 1;
-	}
-
-	if (vv->ov_suspend != NULL) {
-		saa7146_start_preview(vv->ov_suspend);
-		vv->ov_suspend = NULL;
-	}
-
-	if (!found) {
-		DEB_EE("VIDIOC_S_STD: standard not found\n");
-		return -EINVAL;
-	}
-
-	DEB_EE("VIDIOC_S_STD: set to standard to '%s'\n", vv->standard->name);
-	return 0;
-}
-
-static int vidioc_overlay(struct file *file, void *fh, unsigned int on)
-{
-	int err;
-
-	DEB_D("VIDIOC_OVERLAY on:%d\n", on);
-	if (on)
-		err = saa7146_start_preview(fh);
-	else
-		err = saa7146_stop_preview(fh);
-	return err;
-}
-
-static int vidioc_reqbufs(struct file *file, void *__fh, struct v4l2_requestbuffers *b)
-{
-	struct saa7146_fh *fh = __fh;
-
-	if (b->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return videobuf_reqbufs(&fh->video_q, b);
-	if (b->type == V4L2_BUF_TYPE_VBI_CAPTURE)
-		return videobuf_reqbufs(&fh->vbi_q, b);
-	return -EINVAL;
-}
-
-static int vidioc_querybuf(struct file *file, void *__fh, struct v4l2_buffer *buf)
-{
-	struct saa7146_fh *fh = __fh;
-
-	if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return videobuf_querybuf(&fh->video_q, buf);
-	if (buf->type == V4L2_BUF_TYPE_VBI_CAPTURE)
-		return videobuf_querybuf(&fh->vbi_q, buf);
-	return -EINVAL;
-}
-
-static int vidioc_qbuf(struct file *file, void *__fh, struct v4l2_buffer *buf)
-{
-	struct saa7146_fh *fh = __fh;
-
-	if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return videobuf_qbuf(&fh->video_q, buf);
-	if (buf->type == V4L2_BUF_TYPE_VBI_CAPTURE)
-		return videobuf_qbuf(&fh->vbi_q, buf);
-	return -EINVAL;
-}
-
-static int vidioc_dqbuf(struct file *file, void *__fh, struct v4l2_buffer *buf)
-{
-	struct saa7146_fh *fh = __fh;
-
-	if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return videobuf_dqbuf(&fh->video_q, buf, file->f_flags & O_NONBLOCK);
-	if (buf->type == V4L2_BUF_TYPE_VBI_CAPTURE)
-		return videobuf_dqbuf(&fh->vbi_q, buf, file->f_flags & O_NONBLOCK);
-	return -EINVAL;
-}
-
-static int vidioc_streamon(struct file *file, void *__fh, enum v4l2_buf_type type)
-{
-	struct saa7146_fh *fh = __fh;
-	int err;
-
-	DEB_D("VIDIOC_STREAMON, type:%d\n", type);
-
-	err = video_begin(fh);
-	if (err)
-		return err;
-	if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return videobuf_streamon(&fh->video_q);
-	if (type == V4L2_BUF_TYPE_VBI_CAPTURE)
-		return videobuf_streamon(&fh->vbi_q);
-	return -EINVAL;
-}
-
-static int vidioc_streamoff(struct file *file, void *__fh, enum v4l2_buf_type type)
-{
-	struct saa7146_fh *fh = __fh;
-	struct saa7146_dev *dev = fh->dev;
-	struct saa7146_vv *vv = dev->vv_data;
-	int err;
-
-	DEB_D("VIDIOC_STREAMOFF, type:%d\n", type);
-
-	/* ugly: we need to copy some checks from video_end(),
-	   because videobuf_streamoff() relies on the capture running.
-	   check and fix this */
-	if ((vv->video_status & STATUS_CAPTURE) != STATUS_CAPTURE) {
-		DEB_S("not capturing\n");
-		return 0;
-	}
-
-	if (vv->video_fh != fh) {
-		DEB_S("capturing, but in another open\n");
-		return -EBUSY;
-	}
-
-	err = -EINVAL;
-	if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		err = videobuf_streamoff(&fh->video_q);
-	else if (type == V4L2_BUF_TYPE_VBI_CAPTURE)
-		err = videobuf_streamoff(&fh->vbi_q);
-	if (0 != err) {
-		DEB_D("warning: videobuf_streamoff() failed\n");
-		video_end(fh, file);
-	} else {
-		err = video_end(fh, file);
-	}
-	return err;
-}
-
-const struct v4l2_ioctl_ops saa7146_video_ioctl_ops = {
-	.vidioc_querycap             = vidioc_querycap,
-	.vidioc_enum_fmt_vid_cap     = vidioc_enum_fmt_vid_cap,
-	.vidioc_enum_fmt_vid_overlay = vidioc_enum_fmt_vid_cap,
-	.vidioc_g_fmt_vid_cap        = vidioc_g_fmt_vid_cap,
-	.vidioc_try_fmt_vid_cap      = vidioc_try_fmt_vid_cap,
-	.vidioc_s_fmt_vid_cap        = vidioc_s_fmt_vid_cap,
-	.vidioc_g_fmt_vid_overlay    = vidioc_g_fmt_vid_overlay,
-	.vidioc_try_fmt_vid_overlay  = vidioc_try_fmt_vid_overlay,
-	.vidioc_s_fmt_vid_overlay    = vidioc_s_fmt_vid_overlay,
-
-	.vidioc_overlay		     = vidioc_overlay,
-	.vidioc_g_fbuf		     = vidioc_g_fbuf,
-	.vidioc_s_fbuf		     = vidioc_s_fbuf,
-	.vidioc_reqbufs              = vidioc_reqbufs,
-	.vidioc_querybuf             = vidioc_querybuf,
-	.vidioc_qbuf                 = vidioc_qbuf,
-	.vidioc_dqbuf                = vidioc_dqbuf,
-	.vidioc_g_std                = vidioc_g_std,
-	.vidioc_s_std                = vidioc_s_std,
-	.vidioc_streamon             = vidioc_streamon,
-	.vidioc_streamoff            = vidioc_streamoff,
-	.vidioc_g_parm		     = vidioc_g_parm,
-	.vidioc_subscribe_event      = v4l2_ctrl_subscribe_event,
-	.vidioc_unsubscribe_event    = v4l2_event_unsubscribe,
-};
-
-const struct v4l2_ioctl_ops saa7146_vbi_ioctl_ops = {
-	.vidioc_querycap             = vidioc_querycap,
-	.vidioc_g_fmt_vbi_cap        = vidioc_g_fmt_vbi_cap,
-
-	.vidioc_reqbufs              = vidioc_reqbufs,
-	.vidioc_querybuf             = vidioc_querybuf,
-	.vidioc_qbuf                 = vidioc_qbuf,
-	.vidioc_dqbuf                = vidioc_dqbuf,
-	.vidioc_g_std                = vidioc_g_std,
-	.vidioc_s_std                = vidioc_s_std,
-	.vidioc_streamon             = vidioc_streamon,
-	.vidioc_streamoff            = vidioc_streamoff,
-	.vidioc_g_parm		     = vidioc_g_parm,
-	.vidioc_subscribe_event      = v4l2_ctrl_subscribe_event,
-	.vidioc_unsubscribe_event    = v4l2_event_unsubscribe,
-};
-
-/*********************************************************************************/
-/* buffer handling functions                                                  */
-
-static int buffer_activate (struct saa7146_dev *dev,
-		     struct saa7146_buf *buf,
-		     struct saa7146_buf *next)
-{
-	struct saa7146_vv *vv = dev->vv_data;
-
-	buf->vb.state = VIDEOBUF_ACTIVE;
-	saa7146_set_capture(dev,buf,next);
-
-	mod_timer(&vv->video_dmaq.timeout, jiffies+BUFFER_TIMEOUT);
-	return 0;
-}
-
-static void release_all_pagetables(struct saa7146_dev *dev, struct saa7146_buf *buf)
-{
-	saa7146_pgtable_free(dev->pci, &buf->pt[0]);
-	saa7146_pgtable_free(dev->pci, &buf->pt[1]);
-	saa7146_pgtable_free(dev->pci, &buf->pt[2]);
-}
-
-static int buffer_prepare(struct videobuf_queue *q,
-			  struct videobuf_buffer *vb, enum v4l2_field field)
-{
-	struct file *file = q->priv_data;
-	struct saa7146_fh *fh = file->private_data;
-	struct saa7146_dev *dev = fh->dev;
-	struct saa7146_vv *vv = dev->vv_data;
-	struct saa7146_buf *buf = (struct saa7146_buf *)vb;
-	int size,err = 0;
-
-	DEB_CAP("vbuf:%p\n", vb);
-
-	/* sanity checks */
-	if (vv->video_fmt.width  < 48 ||
-	    vv->video_fmt.height < 32 ||
-	    vv->video_fmt.width  > vv->standard->h_max_out ||
-	    vv->video_fmt.height > vv->standard->v_max_out) {
-		DEB_D("w (%d) / h (%d) out of bounds\n",
-		      vv->video_fmt.width, vv->video_fmt.height);
-		return -EINVAL;
-	}
-
-	size = vv->video_fmt.sizeimage;
-	if (0 != buf->vb.baddr && buf->vb.bsize < size) {
-		DEB_D("size mismatch\n");
-		return -EINVAL;
-	}
-
-	DEB_CAP("buffer_prepare [size=%dx%d,bytes=%d,fields=%s]\n",
-		vv->video_fmt.width, vv->video_fmt.height,
-		size, v4l2_field_names[vv->video_fmt.field]);
-	if (buf->vb.width  != vv->video_fmt.width  ||
-	    buf->vb.bytesperline != vv->video_fmt.bytesperline ||
-	    buf->vb.height != vv->video_fmt.height ||
-	    buf->vb.size   != size ||
-	    buf->vb.field  != field      ||
-	    buf->vb.field  != vv->video_fmt.field  ||
-	    buf->fmt       != &vv->video_fmt) {
-		saa7146_dma_free(dev,q,buf);
-	}
-
-	if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
-		struct saa7146_format *sfmt;
-
-		buf->vb.bytesperline  = vv->video_fmt.bytesperline;
-		buf->vb.width  = vv->video_fmt.width;
-		buf->vb.height = vv->video_fmt.height;
-		buf->vb.size   = size;
-		buf->vb.field  = field;
-		buf->fmt       = &vv->video_fmt;
-		buf->vb.field  = vv->video_fmt.field;
-
-		sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
-
-		release_all_pagetables(dev, buf);
-		if( 0 != IS_PLANAR(sfmt->trans)) {
-			saa7146_pgtable_alloc(dev->pci, &buf->pt[0]);
-			saa7146_pgtable_alloc(dev->pci, &buf->pt[1]);
-			saa7146_pgtable_alloc(dev->pci, &buf->pt[2]);
-		} else {
-			saa7146_pgtable_alloc(dev->pci, &buf->pt[0]);
-		}
-
-		err = videobuf_iolock(q,&buf->vb, &vv->ov_fb);
-		if (err)
-			goto oops;
-		err = saa7146_pgtable_build(dev,buf);
-		if (err)
-			goto oops;
-	}
-	buf->vb.state = VIDEOBUF_PREPARED;
-	buf->activate = buffer_activate;
-
-	return 0;
-
- oops:
-	DEB_D("error out\n");
-	saa7146_dma_free(dev,q,buf);
-
-	return err;
-}
-
-static int buffer_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size)
-{
-	struct file *file = q->priv_data;
-	struct saa7146_fh *fh = file->private_data;
-	struct saa7146_vv *vv = fh->dev->vv_data;
-
-	if (0 == *count || *count > MAX_SAA7146_CAPTURE_BUFFERS)
-		*count = MAX_SAA7146_CAPTURE_BUFFERS;
-
-	*size = vv->video_fmt.sizeimage;
-
-	/* check if we exceed the "max_memory" parameter */
-	if( (*count * *size) > (max_memory*1048576) ) {
-		*count = (max_memory*1048576) / *size;
-	}
-
-	DEB_CAP("%d buffers, %d bytes each\n", *count, *size);
-
-	return 0;
-}
-
-static void buffer_queue(struct videobuf_queue *q, struct videobuf_buffer *vb)
-{
-	struct file *file = q->priv_data;
-	struct saa7146_fh *fh = file->private_data;
-	struct saa7146_dev *dev = fh->dev;
-	struct saa7146_vv *vv = dev->vv_data;
-	struct saa7146_buf *buf = (struct saa7146_buf *)vb;
-
-	DEB_CAP("vbuf:%p\n", vb);
-	saa7146_buffer_queue(fh->dev, &vv->video_dmaq, buf);
-}
-
-static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb)
-{
-	struct file *file = q->priv_data;
-	struct saa7146_fh *fh = file->private_data;
-	struct saa7146_dev *dev = fh->dev;
-	struct saa7146_buf *buf = (struct saa7146_buf *)vb;
-
-	DEB_CAP("vbuf:%p\n", vb);
-
-	saa7146_dma_free(dev,q,buf);
-
-	release_all_pagetables(dev, buf);
-}
-
-static const struct videobuf_queue_ops video_qops = {
-	.buf_setup    = buffer_setup,
-	.buf_prepare  = buffer_prepare,
-	.buf_queue    = buffer_queue,
-	.buf_release  = buffer_release,
-};
-
-/********************************************************************************/
-/* file operations */
-
-static void video_init(struct saa7146_dev *dev, struct saa7146_vv *vv)
-{
-	INIT_LIST_HEAD(&vv->video_dmaq.queue);
-
-	timer_setup(&vv->video_dmaq.timeout, saa7146_buffer_timeout, 0);
-	vv->video_dmaq.dev              = dev;
-
-	/* set some default values */
-	vv->standard = &dev->ext_vv_data->stds[0];
-
-	/* FIXME: what's this? */
-	vv->current_hps_source = SAA7146_HPS_SOURCE_PORT_A;
-	vv->current_hps_sync = SAA7146_HPS_SYNC_PORT_A;
-}
-
-
-static int video_open(struct saa7146_dev *dev, struct file *file)
-{
-	struct saa7146_fh *fh = file->private_data;
-
-	videobuf_queue_sg_init(&fh->video_q, &video_qops,
-			    &dev->pci->dev, &dev->slock,
-			    V4L2_BUF_TYPE_VIDEO_CAPTURE,
-			    V4L2_FIELD_INTERLACED,
-			    sizeof(struct saa7146_buf),
-			    file, &dev->v4l2_lock);
-
-	return 0;
-}
-
-
-static void video_close(struct saa7146_dev *dev, struct file *file)
-{
-	struct saa7146_fh *fh = file->private_data;
-	struct saa7146_vv *vv = dev->vv_data;
-	struct videobuf_queue *q = &fh->video_q;
-
-	if (IS_CAPTURE_ACTIVE(fh) != 0)
-		video_end(fh, file);
-	else if (IS_OVERLAY_ACTIVE(fh) != 0)
-		saa7146_stop_preview(fh);
-
-	videobuf_stop(q);
-	/* hmm, why is this function declared void? */
-}
-
-
-static void video_irq_done(struct saa7146_dev *dev, unsigned long st)
-{
-	struct saa7146_vv *vv = dev->vv_data;
-	struct saa7146_dmaqueue *q = &vv->video_dmaq;
-
-	spin_lock(&dev->slock);
-	DEB_CAP("called\n");
-
-	/* only finish the buffer if we have one... */
-	if( NULL != q->curr ) {
-		saa7146_buffer_finish(dev,q,VIDEOBUF_DONE);
-	}
-	saa7146_buffer_next(dev,q,0);
-
-	spin_unlock(&dev->slock);
-}
-
-static ssize_t video_read(struct file *file, char __user *data, size_t count, loff_t *ppos)
-{
-	struct saa7146_fh *fh = file->private_data;
-	struct saa7146_dev *dev = fh->dev;
-	struct saa7146_vv *vv = dev->vv_data;
-	ssize_t ret = 0;
-
-	DEB_EE("called\n");
-
-	if ((vv->video_status & STATUS_CAPTURE) != 0) {
-		/* fixme: should we allow read() captures while streaming capture? */
-		if (vv->video_fh == fh) {
-			DEB_S("already capturing\n");
-			return -EBUSY;
-		}
-		DEB_S("already capturing in another open\n");
-		return -EBUSY;
-	}
-
-	ret = video_begin(fh);
-	if( 0 != ret) {
-		goto out;
-	}
-
-	ret = videobuf_read_one(&fh->video_q , data, count, ppos,
-				file->f_flags & O_NONBLOCK);
-	if (ret != 0) {
-		video_end(fh, file);
-	} else {
-		ret = video_end(fh, file);
-	}
-out:
-	/* restart overlay if it was active before */
-	if (vv->ov_suspend != NULL) {
-		saa7146_start_preview(vv->ov_suspend);
-		vv->ov_suspend = NULL;
-	}
-
-	return ret;
-}
-
-const struct saa7146_use_ops saa7146_video_uops = {
-	.init = video_init,
-	.open = video_open,
-	.release = video_close,
-	.irq_done = video_irq_done,
-	.read = video_read,
-};
diff --git a/drivers/staging/media/deprecated/saa7146/common/saa7146_vv.h b/drivers/staging/media/deprecated/saa7146/common/saa7146_vv.h
deleted file mode 100644
index d7bd916fe3ad..000000000000
--- a/drivers/staging/media/deprecated/saa7146/common/saa7146_vv.h
+++ /dev/null
@@ -1,266 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __SAA7146_VV__
-#define __SAA7146_VV__
-
-#include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
-#include <media/v4l2-fh.h>
-#include <media/videobuf-dma-sg.h>
-#include "saa7146.h"
-
-#define MAX_SAA7146_CAPTURE_BUFFERS	32	/* arbitrary */
-#define BUFFER_TIMEOUT     (HZ/2)  /* 0.5 seconds */
-
-#define WRITE_RPS0(x) do { \
-	dev->d_rps0.cpu_addr[ count++ ] = cpu_to_le32(x); \
-	} while (0);
-
-#define WRITE_RPS1(x) do { \
-	dev->d_rps1.cpu_addr[ count++ ] = cpu_to_le32(x); \
-	} while (0);
-
-struct	saa7146_video_dma {
-	u32 base_odd;
-	u32 base_even;
-	u32 prot_addr;
-	u32 pitch;
-	u32 base_page;
-	u32 num_line_byte;
-};
-
-#define FORMAT_BYTE_SWAP	0x1
-#define FORMAT_IS_PLANAR	0x2
-
-struct saa7146_format {
-	u32	pixelformat;
-	u32	trans;
-	u8	depth;
-	u8	flags;
-	u8	swap;
-};
-
-struct saa7146_standard
-{
-	char          *name;
-	v4l2_std_id   id;
-
-	int v_offset;	/* number of lines of vertical offset before processing */
-	int v_field;	/* number of lines in a field for HPS to process */
-
-	int h_offset;	/* horizontal offset of processing window */
-	int h_pixels;	/* number of horizontal pixels to process */
-
-	int v_max_out;
-	int h_max_out;
-};
-
-/* buffer for one video/vbi frame */
-struct saa7146_buf {
-	/* common v4l buffer stuff -- must be first */
-	struct videobuf_buffer vb;
-
-	/* saa7146 specific */
-	struct v4l2_pix_format  *fmt;
-	int (*activate)(struct saa7146_dev *dev,
-			struct saa7146_buf *buf,
-			struct saa7146_buf *next);
-
-	/* page tables */
-	struct saa7146_pgtable  pt[3];
-};
-
-struct saa7146_dmaqueue {
-	struct saa7146_dev	*dev;
-	struct saa7146_buf	*curr;
-	struct list_head	queue;
-	struct timer_list	timeout;
-};
-
-struct saa7146_overlay {
-	struct saa7146_fh	*fh;
-	struct v4l2_window	win;
-	struct v4l2_clip	clips[16];
-	int			nclips;
-};
-
-/* per open data */
-struct saa7146_fh {
-	/* Must be the first field! */
-	struct v4l2_fh		fh;
-	struct saa7146_dev	*dev;
-
-	/* video capture */
-	struct videobuf_queue	video_q;
-
-	/* vbi capture */
-	struct videobuf_queue	vbi_q;
-
-	unsigned int resources;	/* resource management for device open */
-};
-
-#define STATUS_OVERLAY	0x01
-#define STATUS_CAPTURE	0x02
-
-struct saa7146_vv
-{
-	/* vbi capture */
-	struct saa7146_dmaqueue		vbi_dmaq;
-	struct v4l2_vbi_format		vbi_fmt;
-	struct timer_list		vbi_read_timeout;
-	struct file			*vbi_read_timeout_file;
-	/* vbi workaround interrupt queue */
-	wait_queue_head_t		vbi_wq;
-	int				vbi_fieldcount;
-	struct saa7146_fh		*vbi_streaming;
-
-	int				video_status;
-	struct saa7146_fh		*video_fh;
-
-	/* video overlay */
-	struct saa7146_overlay		ov;
-	struct v4l2_framebuffer		ov_fb;
-	struct saa7146_format		*ov_fmt;
-	struct saa7146_fh		*ov_suspend;
-
-	/* video capture */
-	struct saa7146_dmaqueue		video_dmaq;
-	struct v4l2_pix_format		video_fmt;
-	enum v4l2_field			last_field;
-
-	/* common: fixme? shouldn't this be in saa7146_fh?
-	   (this leads to a more complicated question: shall the driver
-	   store the different settings (for example S_INPUT) for every open
-	   and restore it appropriately, or should all settings be common for
-	   all opens? currently, we do the latter, like all other
-	   drivers do... */
-	struct saa7146_standard	*standard;
-
-	int	vflip;
-	int	hflip;
-	int	current_hps_source;
-	int	current_hps_sync;
-
-	struct saa7146_dma	d_clipping;	/* pointer to clipping memory */
-
-	unsigned int resources;	/* resource management for device */
-};
-
-/* flags */
-#define SAA7146_USE_PORT_B_FOR_VBI	0x2     /* use input port b for vbi hardware bug workaround */
-
-struct saa7146_ext_vv
-{
-	/* information about the video capabilities of the device */
-	int	inputs;
-	int	audios;
-	u32	capabilities;
-	int	flags;
-
-	/* additionally supported transmission standards */
-	struct saa7146_standard *stds;
-	int num_stds;
-	int (*std_callback)(struct saa7146_dev*, struct saa7146_standard *);
-
-	/* the extension can override this */
-	struct v4l2_ioctl_ops vid_ops;
-	struct v4l2_ioctl_ops vbi_ops;
-	/* pointer to the saa7146 core ops */
-	const struct v4l2_ioctl_ops *core_ops;
-
-	struct v4l2_file_operations vbi_fops;
-};
-
-struct saa7146_use_ops  {
-	void (*init)(struct saa7146_dev *, struct saa7146_vv *);
-	int(*open)(struct saa7146_dev *, struct file *);
-	void (*release)(struct saa7146_dev *, struct file *);
-	void (*irq_done)(struct saa7146_dev *, unsigned long status);
-	ssize_t (*read)(struct file *, char __user *, size_t, loff_t *);
-};
-
-/* from saa7146_fops.c */
-int saa7146_register_device(struct video_device *vid, struct saa7146_dev *dev, char *name, int type);
-int saa7146_unregister_device(struct video_device *vid, struct saa7146_dev *dev);
-void saa7146_buffer_finish(struct saa7146_dev *dev, struct saa7146_dmaqueue *q, int state);
-void saa7146_buffer_next(struct saa7146_dev *dev, struct saa7146_dmaqueue *q,int vbi);
-int saa7146_buffer_queue(struct saa7146_dev *dev, struct saa7146_dmaqueue *q, struct saa7146_buf *buf);
-void saa7146_buffer_timeout(struct timer_list *t);
-void saa7146_dma_free(struct saa7146_dev* dev,struct videobuf_queue *q,
-						struct saa7146_buf *buf);
-
-int saa7146_vv_init(struct saa7146_dev* dev, struct saa7146_ext_vv *ext_vv);
-int saa7146_vv_release(struct saa7146_dev* dev);
-
-/* from saa7146_hlp.c */
-int saa7146_enable_overlay(struct saa7146_fh *fh);
-void saa7146_disable_overlay(struct saa7146_fh *fh);
-
-void saa7146_set_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next);
-void saa7146_write_out_dma(struct saa7146_dev* dev, int which, struct saa7146_video_dma* vdma) ;
-void saa7146_set_hps_source_and_sync(struct saa7146_dev *saa, int source, int sync);
-void saa7146_set_gpio(struct saa7146_dev *saa, u8 pin, u8 data);
-
-/* from saa7146_video.c */
-extern const struct v4l2_ioctl_ops saa7146_video_ioctl_ops;
-extern const struct v4l2_ioctl_ops saa7146_vbi_ioctl_ops;
-extern const struct saa7146_use_ops saa7146_video_uops;
-int saa7146_start_preview(struct saa7146_fh *fh);
-int saa7146_stop_preview(struct saa7146_fh *fh);
-long saa7146_video_do_ioctl(struct file *file, unsigned int cmd, void *arg);
-int saa7146_s_ctrl(struct v4l2_ctrl *ctrl);
-
-/* from saa7146_vbi.c */
-extern const struct saa7146_use_ops saa7146_vbi_uops;
-
-/* resource management functions */
-int saa7146_res_get(struct saa7146_fh *fh, unsigned int bit);
-void saa7146_res_free(struct saa7146_fh *fh, unsigned int bits);
-
-#define RESOURCE_DMA1_HPS	0x1
-#define RESOURCE_DMA2_CLP	0x2
-#define RESOURCE_DMA3_BRS	0x4
-
-/* saa7146 source inputs */
-#define SAA7146_HPS_SOURCE_PORT_A	0x00
-#define SAA7146_HPS_SOURCE_PORT_B	0x01
-#define SAA7146_HPS_SOURCE_YPB_CPA	0x02
-#define SAA7146_HPS_SOURCE_YPA_CPB	0x03
-
-/* sync inputs */
-#define SAA7146_HPS_SYNC_PORT_A		0x00
-#define SAA7146_HPS_SYNC_PORT_B		0x01
-
-/* some memory sizes */
-/* max. 16 clipping rectangles */
-#define SAA7146_CLIPPING_MEM	(16 * 4 * sizeof(u32))
-
-/* some defines for the various clipping-modes */
-#define SAA7146_CLIPPING_RECT		0x4
-#define SAA7146_CLIPPING_RECT_INVERTED	0x5
-#define SAA7146_CLIPPING_MASK		0x6
-#define SAA7146_CLIPPING_MASK_INVERTED	0x7
-
-/* output formats: each entry holds four information */
-#define RGB08_COMPOSED	0x0217 /* composed is used in the sense of "not-planar" */
-/* this means: planar?=0, yuv2rgb-conversation-mode=2, dither=yes(=1), format-mode = 7 */
-#define RGB15_COMPOSED	0x0213
-#define RGB16_COMPOSED	0x0210
-#define RGB24_COMPOSED	0x0201
-#define RGB32_COMPOSED	0x0202
-
-#define Y8			0x0006
-#define YUV411_COMPOSED		0x0003
-#define YUV422_COMPOSED		0x0000
-/* this means: planar?=1, yuv2rgb-conversion-mode=0, dither=no(=0), format-mode = b */
-#define YUV411_DECOMPOSED	0x100b
-#define YUV422_DECOMPOSED	0x1009
-#define YUV420_DECOMPOSED	0x100a
-
-#define IS_PLANAR(x) (x & 0xf000)
-
-/* misc defines */
-#define SAA7146_NO_SWAP		(0x0)
-#define SAA7146_TWO_BYTE_SWAP	(0x1)
-#define SAA7146_FOUR_BYTE_SWAP	(0x2)
-
-#endif
diff --git a/drivers/staging/media/deprecated/saa7146/saa7146/Kconfig b/drivers/staging/media/deprecated/saa7146/saa7146/Kconfig
deleted file mode 100644
index 228e8d3f8d2b..000000000000
--- a/drivers/staging/media/deprecated/saa7146/saa7146/Kconfig
+++ /dev/null
@@ -1,48 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-config VIDEO_HEXIUM_GEMINI
-	tristate "Hexium Gemini frame grabber (DEPRECATED)"
-	depends on PCI && VIDEO_DEV && I2C
-	select VIDEO_SAA7146_VV
-	help
-	  This is a video4linux driver for the Hexium Gemini frame
-	  grabber card by Hexium. Please note that the Gemini Dual
-	  card is *not* fully supported.
-
-	  This driver is deprecated and is scheduled for removal by
-	  the beginning of 2023. See the TODO file for more information.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called hexium_gemini.
-
-config VIDEO_HEXIUM_ORION
-	tristate "Hexium HV-PCI6 and Orion frame grabber (DEPRECATED)"
-	depends on PCI && VIDEO_DEV && I2C
-	select VIDEO_SAA7146_VV
-	help
-	  This is a video4linux driver for the Hexium HV-PCI6 and
-	  Orion frame grabber cards by Hexium.
-
-	  This driver is deprecated and is scheduled for removal by
-	  the beginning of 2023. See the TODO file for more information.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called hexium_orion.
-
-config VIDEO_MXB
-	tristate "Siemens-Nixdorf 'Multimedia eXtension Board' (DEPRECATED)"
-	depends on PCI && VIDEO_DEV && I2C
-	select VIDEO_SAA7146_VV
-	select VIDEO_TUNER
-	select VIDEO_SAA711X if MEDIA_SUBDRV_AUTOSELECT
-	select VIDEO_TDA9840 if MEDIA_SUBDRV_AUTOSELECT
-	select VIDEO_TEA6415C if MEDIA_SUBDRV_AUTOSELECT
-	select VIDEO_TEA6420 if MEDIA_SUBDRV_AUTOSELECT
-	help
-	  This is a video4linux driver for the 'Multimedia eXtension Board'
-	  TV card by Siemens-Nixdorf.
-
-	  This driver is deprecated and is scheduled for removal by
-	  the beginning of 2023. See the TODO file for more information.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called mxb.
diff --git a/drivers/staging/media/deprecated/saa7146/saa7146/Makefile b/drivers/staging/media/deprecated/saa7146/saa7146/Makefile
deleted file mode 100644
index 37c9336f83d5..000000000000
--- a/drivers/staging/media/deprecated/saa7146/saa7146/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_VIDEO_MXB) += mxb.o
-obj-$(CONFIG_VIDEO_HEXIUM_ORION) += hexium_orion.o
-obj-$(CONFIG_VIDEO_HEXIUM_GEMINI) += hexium_gemini.o
-
-ccflags-y += -I$(srctree)/drivers/media/i2c
diff --git a/drivers/staging/media/deprecated/saa7146/saa7146/TODO b/drivers/staging/media/deprecated/saa7146/saa7146/TODO
deleted file mode 100644
index c9ae2ec79cea..000000000000
--- a/drivers/staging/media/deprecated/saa7146/saa7146/TODO
+++ /dev/null
@@ -1,7 +0,0 @@
-The saa7146-based drivers are one of the few drivers still not using
-the vb2 framework, so these drivers are now deprecated with the intent of
-removing them altogether by the beginning of 2023.
-
-In order to keep these drivers they have to be converted to vb2.
-If someone is interested in doing this work, then contact the
-linux-media mailinglist (https://linuxtv.org/lists.php).
diff --git a/drivers/staging/media/deprecated/saa7146/saa7146/hexium_gemini.c b/drivers/staging/media/deprecated/saa7146/saa7146/hexium_gemini.c
deleted file mode 100644
index 124e82bd4507..000000000000
--- a/drivers/staging/media/deprecated/saa7146/saa7146/hexium_gemini.c
+++ /dev/null
@@ -1,425 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
-    hexium_gemini.c - v4l2 driver for Hexium Gemini frame grabber cards
-
-    Visit http://www.mihu.de/linux/saa7146/ and follow the link
-    to "hexium" for further details about this card.
-
-    Copyright (C) 2003 Michael Hunold <michael@mihu.de>
-
-*/
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#define DEBUG_VARIABLE debug
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include "../common/saa7146_vv.h"
-
-static int debug;
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "debug verbosity");
-
-/* global variables */
-static int hexium_num;
-
-#define HEXIUM_GEMINI			4
-#define HEXIUM_GEMINI_DUAL		5
-
-#define HEXIUM_INPUTS	9
-static struct v4l2_input hexium_inputs[HEXIUM_INPUTS] = {
-	{ 0, "CVBS 1",	V4L2_INPUT_TYPE_CAMERA,	0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
-	{ 1, "CVBS 2",	V4L2_INPUT_TYPE_CAMERA,	0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
-	{ 2, "CVBS 3",	V4L2_INPUT_TYPE_CAMERA,	0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
-	{ 3, "CVBS 4",	V4L2_INPUT_TYPE_CAMERA,	0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
-	{ 4, "CVBS 5",	V4L2_INPUT_TYPE_CAMERA,	0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
-	{ 5, "CVBS 6",	V4L2_INPUT_TYPE_CAMERA,	0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
-	{ 6, "Y/C 1",	V4L2_INPUT_TYPE_CAMERA,	0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
-	{ 7, "Y/C 2",	V4L2_INPUT_TYPE_CAMERA,	0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
-	{ 8, "Y/C 3",	V4L2_INPUT_TYPE_CAMERA,	0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
-};
-
-#define HEXIUM_AUDIOS	0
-
-struct hexium_data
-{
-	s8 adr;
-	u8 byte;
-};
-
-#define HEXIUM_GEMINI_V_1_0		1
-#define HEXIUM_GEMINI_DUAL_V_1_0	2
-
-struct hexium
-{
-	int type;
-
-	struct video_device	video_dev;
-	struct i2c_adapter	i2c_adapter;
-
-	int		cur_input;	/* current input */
-	v4l2_std_id	cur_std;	/* current standard */
-};
-
-/* Samsung KS0127B decoder default registers */
-static u8 hexium_ks0127b[0x100]={
-/*00*/ 0x00,0x52,0x30,0x40,0x01,0x0C,0x2A,0x10,
-/*08*/ 0x00,0x00,0x00,0x60,0x00,0x00,0x0F,0x06,
-/*10*/ 0x00,0x00,0xE4,0xC0,0x00,0x00,0x00,0x00,
-/*18*/ 0x14,0x9B,0xFE,0xFF,0xFC,0xFF,0x03,0x22,
-/*20*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/*28*/ 0x00,0x00,0x00,0x00,0x00,0x2C,0x9B,0x00,
-/*30*/ 0x00,0x00,0x10,0x80,0x80,0x10,0x80,0x80,
-/*38*/ 0x01,0x04,0x00,0x00,0x00,0x29,0xC0,0x00,
-/*40*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/*48*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/*50*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/*58*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/*60*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/*68*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/*70*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/*78*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/*80*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/*88*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/*90*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/*98*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/*A0*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/*A8*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/*B0*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/*B8*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/*C0*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/*C8*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/*D0*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/*D8*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/*E0*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/*E8*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/*F0*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/*F8*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-};
-
-static struct hexium_data hexium_pal[] = {
-	{ 0x01, 0x52 }, { 0x12, 0x64 }, { 0x2D, 0x2C }, { 0x2E, 0x9B }, { -1 , 0xFF }
-};
-
-static struct hexium_data hexium_ntsc[] = {
-	{ 0x01, 0x53 }, { 0x12, 0x04 }, { 0x2D, 0x23 }, { 0x2E, 0x81 }, { -1 , 0xFF }
-};
-
-static struct hexium_data hexium_secam[] = {
-	{ 0x01, 0x52 }, { 0x12, 0x64 }, { 0x2D, 0x2C }, { 0x2E, 0x9B }, { -1 , 0xFF }
-};
-
-static struct hexium_data hexium_input_select[] = {
-	{ 0x02, 0x60 },
-	{ 0x02, 0x64 },
-	{ 0x02, 0x61 },
-	{ 0x02, 0x65 },
-	{ 0x02, 0x62 },
-	{ 0x02, 0x66 },
-	{ 0x02, 0x68 },
-	{ 0x02, 0x69 },
-	{ 0x02, 0x6A },
-};
-
-/* fixme: h_offset = 0 for Hexium Gemini *Dual*, which
-   are currently *not* supported*/
-static struct saa7146_standard hexium_standards[] = {
-	{
-		.name	= "PAL",	.id	= V4L2_STD_PAL,
-		.v_offset	= 28,	.v_field	= 288,
-		.h_offset	= 1,	.h_pixels	= 680,
-		.v_max_out	= 576,	.h_max_out	= 768,
-	}, {
-		.name	= "NTSC",	.id	= V4L2_STD_NTSC,
-		.v_offset	= 28,	.v_field	= 240,
-		.h_offset	= 1,	.h_pixels	= 640,
-		.v_max_out	= 480,	.h_max_out	= 640,
-	}, {
-		.name	= "SECAM",	.id	= V4L2_STD_SECAM,
-		.v_offset	= 28,	.v_field	= 288,
-		.h_offset	= 1,	.h_pixels	= 720,
-		.v_max_out	= 576,	.h_max_out	= 768,
-	}
-};
-
-/* bring hardware to a sane state. this has to be done, just in case someone
-   wants to capture from this device before it has been properly initialized.
-   the capture engine would badly fail, because no valid signal arrives on the
-   saa7146, thus leading to timeouts and stuff. */
-static int hexium_init_done(struct saa7146_dev *dev)
-{
-	struct hexium *hexium = (struct hexium *) dev->ext_priv;
-	union i2c_smbus_data data;
-	int i = 0;
-
-	DEB_D("hexium_init_done called\n");
-
-	/* initialize the helper ics to useful values */
-	for (i = 0; i < sizeof(hexium_ks0127b); i++) {
-		data.byte = hexium_ks0127b[i];
-		if (0 != i2c_smbus_xfer(&hexium->i2c_adapter, 0x6c, 0, I2C_SMBUS_WRITE, i, I2C_SMBUS_BYTE_DATA, &data)) {
-			pr_err("hexium_init_done() failed for address 0x%02x\n",
-			       i);
-		}
-	}
-
-	return 0;
-}
-
-static int hexium_set_input(struct hexium *hexium, int input)
-{
-	union i2c_smbus_data data;
-
-	DEB_D("\n");
-
-	data.byte = hexium_input_select[input].byte;
-	if (0 != i2c_smbus_xfer(&hexium->i2c_adapter, 0x6c, 0, I2C_SMBUS_WRITE, hexium_input_select[input].adr, I2C_SMBUS_BYTE_DATA, &data)) {
-		return -1;
-	}
-
-	return 0;
-}
-
-static int hexium_set_standard(struct hexium *hexium, struct hexium_data *vdec)
-{
-	union i2c_smbus_data data;
-	int i = 0;
-
-	DEB_D("\n");
-
-	while (vdec[i].adr != -1) {
-		data.byte = vdec[i].byte;
-		if (0 != i2c_smbus_xfer(&hexium->i2c_adapter, 0x6c, 0, I2C_SMBUS_WRITE, vdec[i].adr, I2C_SMBUS_BYTE_DATA, &data)) {
-			pr_err("hexium_init_done: hexium_set_standard() failed for address 0x%02x\n",
-			       i);
-			return -1;
-		}
-		i++;
-	}
-	return 0;
-}
-
-static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i)
-{
-	DEB_EE("VIDIOC_ENUMINPUT %d\n", i->index);
-
-	if (i->index >= HEXIUM_INPUTS)
-		return -EINVAL;
-
-	memcpy(i, &hexium_inputs[i->index], sizeof(struct v4l2_input));
-
-	DEB_D("v4l2_ioctl: VIDIOC_ENUMINPUT %d\n", i->index);
-	return 0;
-}
-
-static int vidioc_g_input(struct file *file, void *fh, unsigned int *input)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-	struct hexium *hexium = (struct hexium *) dev->ext_priv;
-
-	*input = hexium->cur_input;
-
-	DEB_D("VIDIOC_G_INPUT: %d\n", *input);
-	return 0;
-}
-
-static int vidioc_s_input(struct file *file, void *fh, unsigned int input)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-	struct hexium *hexium = (struct hexium *) dev->ext_priv;
-
-	DEB_EE("VIDIOC_S_INPUT %d\n", input);
-
-	if (input >= HEXIUM_INPUTS)
-		return -EINVAL;
-
-	hexium->cur_input = input;
-	hexium_set_input(hexium, input);
-	return 0;
-}
-
-static struct saa7146_ext_vv vv_data;
-
-/* this function only gets called when the probing was successful */
-static int hexium_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
-{
-	struct hexium *hexium;
-	int ret;
-
-	DEB_EE("\n");
-
-	hexium = kzalloc(sizeof(*hexium), GFP_KERNEL);
-	if (!hexium)
-		return -ENOMEM;
-
-	dev->ext_priv = hexium;
-
-	/* enable i2c-port pins */
-	saa7146_write(dev, MC1, (MASK_08 | MASK_24 | MASK_10 | MASK_26));
-
-	strscpy(hexium->i2c_adapter.name, "hexium gemini",
-		sizeof(hexium->i2c_adapter.name));
-	saa7146_i2c_adapter_prepare(dev, &hexium->i2c_adapter, SAA7146_I2C_BUS_BIT_RATE_480);
-	if (i2c_add_adapter(&hexium->i2c_adapter) < 0) {
-		DEB_S("cannot register i2c-device. skipping.\n");
-		kfree(hexium);
-		return -EFAULT;
-	}
-
-	/*  set HWControl GPIO number 2 */
-	saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTHI);
-
-	saa7146_write(dev, DD1_INIT, 0x07000700);
-	saa7146_write(dev, DD1_STREAM_B, 0x00000000);
-	saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26));
-
-	/* the rest */
-	hexium->cur_input = 0;
-	hexium_init_done(dev);
-
-	hexium_set_standard(hexium, hexium_pal);
-	hexium->cur_std = V4L2_STD_PAL;
-
-	hexium_set_input(hexium, 0);
-	hexium->cur_input = 0;
-
-	ret = saa7146_vv_init(dev, &vv_data);
-	if (ret) {
-		i2c_del_adapter(&hexium->i2c_adapter);
-		kfree(hexium);
-		return ret;
-	}
-
-	vv_data.vid_ops.vidioc_enum_input = vidioc_enum_input;
-	vv_data.vid_ops.vidioc_g_input = vidioc_g_input;
-	vv_data.vid_ops.vidioc_s_input = vidioc_s_input;
-	ret = saa7146_register_device(&hexium->video_dev, dev, "hexium gemini", VFL_TYPE_VIDEO);
-	if (ret < 0) {
-		pr_err("cannot register capture v4l2 device. skipping.\n");
-		saa7146_vv_release(dev);
-		i2c_del_adapter(&hexium->i2c_adapter);
-		kfree(hexium);
-		return ret;
-	}
-
-	pr_info("found 'hexium gemini' frame grabber-%d\n", hexium_num);
-	hexium_num++;
-
-	return 0;
-}
-
-static int hexium_detach(struct saa7146_dev *dev)
-{
-	struct hexium *hexium = (struct hexium *) dev->ext_priv;
-
-	DEB_EE("dev:%p\n", dev);
-
-	saa7146_unregister_device(&hexium->video_dev, dev);
-	saa7146_vv_release(dev);
-
-	hexium_num--;
-
-	i2c_del_adapter(&hexium->i2c_adapter);
-	kfree(hexium);
-	return 0;
-}
-
-static int std_callback(struct saa7146_dev *dev, struct saa7146_standard *std)
-{
-	struct hexium *hexium = (struct hexium *) dev->ext_priv;
-
-	if (V4L2_STD_PAL == std->id) {
-		hexium_set_standard(hexium, hexium_pal);
-		hexium->cur_std = V4L2_STD_PAL;
-		return 0;
-	} else if (V4L2_STD_NTSC == std->id) {
-		hexium_set_standard(hexium, hexium_ntsc);
-		hexium->cur_std = V4L2_STD_NTSC;
-		return 0;
-	} else if (V4L2_STD_SECAM == std->id) {
-		hexium_set_standard(hexium, hexium_secam);
-		hexium->cur_std = V4L2_STD_SECAM;
-		return 0;
-	}
-
-	return -1;
-}
-
-static struct saa7146_extension hexium_extension;
-
-static struct saa7146_pci_extension_data hexium_gemini_4bnc = {
-	.ext_priv = "Hexium Gemini (4 BNC)",
-	.ext = &hexium_extension,
-};
-
-static struct saa7146_pci_extension_data hexium_gemini_dual_4bnc = {
-	.ext_priv = "Hexium Gemini Dual (4 BNC)",
-	.ext = &hexium_extension,
-};
-
-static const struct pci_device_id pci_tbl[] = {
-	{
-	 .vendor = PCI_VENDOR_ID_PHILIPS,
-	 .device = PCI_DEVICE_ID_PHILIPS_SAA7146,
-	 .subvendor = 0x17c8,
-	 .subdevice = 0x2401,
-	 .driver_data = (unsigned long) &hexium_gemini_4bnc,
-	 },
-	{
-	 .vendor = PCI_VENDOR_ID_PHILIPS,
-	 .device = PCI_DEVICE_ID_PHILIPS_SAA7146,
-	 .subvendor = 0x17c8,
-	 .subdevice = 0x2402,
-	 .driver_data = (unsigned long) &hexium_gemini_dual_4bnc,
-	 },
-	{
-	 .vendor = 0,
-	 }
-};
-
-MODULE_DEVICE_TABLE(pci, pci_tbl);
-
-static struct saa7146_ext_vv vv_data = {
-	.inputs = HEXIUM_INPUTS,
-	.capabilities = 0,
-	.stds = &hexium_standards[0],
-	.num_stds = ARRAY_SIZE(hexium_standards),
-	.std_callback = &std_callback,
-};
-
-static struct saa7146_extension hexium_extension = {
-	.name = "hexium gemini",
-	.flags = SAA7146_USE_I2C_IRQ,
-
-	.pci_tbl = &pci_tbl[0],
-	.module = THIS_MODULE,
-
-	.attach = hexium_attach,
-	.detach = hexium_detach,
-
-	.irq_mask = 0,
-	.irq_func = NULL,
-};
-
-static int __init hexium_init_module(void)
-{
-	if (0 != saa7146_register_extension(&hexium_extension)) {
-		DEB_S("failed to register extension\n");
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
-static void __exit hexium_cleanup_module(void)
-{
-	saa7146_unregister_extension(&hexium_extension);
-}
-
-module_init(hexium_init_module);
-module_exit(hexium_cleanup_module);
-
-MODULE_DESCRIPTION("video4linux-2 driver for Hexium Gemini frame grabber cards");
-MODULE_AUTHOR("Michael Hunold <michael@mihu.de>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/media/deprecated/saa7146/saa7146/hexium_orion.c b/drivers/staging/media/deprecated/saa7146/saa7146/hexium_orion.c
deleted file mode 100644
index ebd63998ac79..000000000000
--- a/drivers/staging/media/deprecated/saa7146/saa7146/hexium_orion.c
+++ /dev/null
@@ -1,496 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
-    hexium_orion.c - v4l2 driver for the Hexium Orion frame grabber cards
-
-    Visit http://www.mihu.de/linux/saa7146/ and follow the link
-    to "hexium" for further details about this card.
-
-    Copyright (C) 2003 Michael Hunold <michael@mihu.de>
-
-*/
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#define DEBUG_VARIABLE debug
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include "../common/saa7146_vv.h"
-
-static int debug;
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "debug verbosity");
-
-/* global variables */
-static int hexium_num;
-
-#define HEXIUM_HV_PCI6_ORION		1
-#define HEXIUM_ORION_1SVHS_3BNC		2
-#define HEXIUM_ORION_4BNC		3
-
-#define HEXIUM_INPUTS	9
-static struct v4l2_input hexium_inputs[HEXIUM_INPUTS] = {
-	{ 0, "CVBS 1",	V4L2_INPUT_TYPE_CAMERA,	0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
-	{ 1, "CVBS 2",	V4L2_INPUT_TYPE_CAMERA,	0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
-	{ 2, "CVBS 3",	V4L2_INPUT_TYPE_CAMERA,	0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
-	{ 3, "CVBS 4",	V4L2_INPUT_TYPE_CAMERA,	0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
-	{ 4, "CVBS 5",	V4L2_INPUT_TYPE_CAMERA,	0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
-	{ 5, "CVBS 6",	V4L2_INPUT_TYPE_CAMERA,	0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
-	{ 6, "Y/C 1",	V4L2_INPUT_TYPE_CAMERA,	0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
-	{ 7, "Y/C 2",	V4L2_INPUT_TYPE_CAMERA,	0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
-	{ 8, "Y/C 3",	V4L2_INPUT_TYPE_CAMERA,	0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
-};
-
-#define HEXIUM_AUDIOS	0
-
-struct hexium_data
-{
-	s8 adr;
-	u8 byte;
-};
-
-struct hexium
-{
-	int type;
-	struct video_device	video_dev;
-	struct i2c_adapter	i2c_adapter;
-
-	int cur_input;	/* current input */
-};
-
-/* Philips SAA7110 decoder default registers */
-static u8 hexium_saa7110[53]={
-/*00*/ 0x4C,0x3C,0x0D,0xEF,0xBD,0xF0,0x00,0x00,
-/*08*/ 0xF8,0xF8,0x60,0x60,0x40,0x86,0x18,0x90,
-/*10*/ 0x00,0x2C,0x40,0x46,0x42,0x1A,0xFF,0xDA,
-/*18*/ 0xF0,0x8B,0x00,0x00,0x00,0x00,0x00,0x00,
-/*20*/ 0xD9,0x17,0x40,0x41,0x80,0x41,0x80,0x4F,
-/*28*/ 0xFE,0x01,0x0F,0x0F,0x03,0x01,0x81,0x03,
-/*30*/ 0x44,0x75,0x01,0x8C,0x03
-};
-
-static struct {
-	struct hexium_data data[8];
-} hexium_input_select[] = {
-{
-	{ /* cvbs 1 */
-		{ 0x06, 0x00 },
-		{ 0x20, 0xD9 },
-		{ 0x21, 0x17 }, // 0x16,
-		{ 0x22, 0x40 },
-		{ 0x2C, 0x03 },
-		{ 0x30, 0x44 },
-		{ 0x31, 0x75 }, // ??
-		{ 0x21, 0x16 }, // 0x03,
-	}
-}, {
-	{ /* cvbs 2 */
-		{ 0x06, 0x00 },
-		{ 0x20, 0x78 },
-		{ 0x21, 0x07 }, // 0x03,
-		{ 0x22, 0xD2 },
-		{ 0x2C, 0x83 },
-		{ 0x30, 0x60 },
-		{ 0x31, 0xB5 }, // ?
-		{ 0x21, 0x03 },
-	}
-}, {
-	{ /* cvbs 3 */
-		{ 0x06, 0x00 },
-		{ 0x20, 0xBA },
-		{ 0x21, 0x07 }, // 0x05,
-		{ 0x22, 0x91 },
-		{ 0x2C, 0x03 },
-		{ 0x30, 0x60 },
-		{ 0x31, 0xB5 }, // ??
-		{ 0x21, 0x05 }, // 0x03,
-	}
-}, {
-	{ /* cvbs 4 */
-		{ 0x06, 0x00 },
-		{ 0x20, 0xD8 },
-		{ 0x21, 0x17 }, // 0x16,
-		{ 0x22, 0x40 },
-		{ 0x2C, 0x03 },
-		{ 0x30, 0x44 },
-		{ 0x31, 0x75 }, // ??
-		{ 0x21, 0x16 }, // 0x03,
-	}
-}, {
-	{ /* cvbs 5 */
-		{ 0x06, 0x00 },
-		{ 0x20, 0xB8 },
-		{ 0x21, 0x07 }, // 0x05,
-		{ 0x22, 0x91 },
-		{ 0x2C, 0x03 },
-		{ 0x30, 0x60 },
-		{ 0x31, 0xB5 }, // ??
-		{ 0x21, 0x05 }, // 0x03,
-	}
-}, {
-	{ /* cvbs 6 */
-		{ 0x06, 0x00 },
-		{ 0x20, 0x7C },
-		{ 0x21, 0x07 }, // 0x03
-		{ 0x22, 0xD2 },
-		{ 0x2C, 0x83 },
-		{ 0x30, 0x60 },
-		{ 0x31, 0xB5 }, // ??
-		{ 0x21, 0x03 },
-	}
-}, {
-	{ /* y/c 1 */
-		{ 0x06, 0x80 },
-		{ 0x20, 0x59 },
-		{ 0x21, 0x17 },
-		{ 0x22, 0x42 },
-		{ 0x2C, 0xA3 },
-		{ 0x30, 0x44 },
-		{ 0x31, 0x75 },
-		{ 0x21, 0x12 },
-	}
-}, {
-	{ /* y/c 2 */
-		{ 0x06, 0x80 },
-		{ 0x20, 0x9A },
-		{ 0x21, 0x17 },
-		{ 0x22, 0xB1 },
-		{ 0x2C, 0x13 },
-		{ 0x30, 0x60 },
-		{ 0x31, 0xB5 },
-		{ 0x21, 0x14 },
-	}
-}, {
-	{ /* y/c 3 */
-		{ 0x06, 0x80 },
-		{ 0x20, 0x3C },
-		{ 0x21, 0x27 },
-		{ 0x22, 0xC1 },
-		{ 0x2C, 0x23 },
-		{ 0x30, 0x44 },
-		{ 0x31, 0x75 },
-		{ 0x21, 0x21 },
-	}
-}
-};
-
-static struct saa7146_standard hexium_standards[] = {
-	{
-		.name	= "PAL",	.id	= V4L2_STD_PAL,
-		.v_offset	= 16,	.v_field	= 288,
-		.h_offset	= 1,	.h_pixels	= 680,
-		.v_max_out	= 576,	.h_max_out	= 768,
-	}, {
-		.name	= "NTSC",	.id	= V4L2_STD_NTSC,
-		.v_offset	= 16,	.v_field	= 240,
-		.h_offset	= 1,	.h_pixels	= 640,
-		.v_max_out	= 480,	.h_max_out	= 640,
-	}, {
-		.name	= "SECAM",	.id	= V4L2_STD_SECAM,
-		.v_offset	= 16,	.v_field	= 288,
-		.h_offset	= 1,	.h_pixels	= 720,
-		.v_max_out	= 576,	.h_max_out	= 768,
-	}
-};
-
-/* this is only called for old HV-PCI6/Orion cards
-   without eeprom */
-static int hexium_probe(struct saa7146_dev *dev)
-{
-	struct hexium *hexium = NULL;
-	union i2c_smbus_data data;
-	int err = 0;
-
-	DEB_EE("\n");
-
-	/* there are no hexium orion cards with revision 0 saa7146s */
-	if (0 == dev->revision) {
-		return -EFAULT;
-	}
-
-	hexium = kzalloc(sizeof(*hexium), GFP_KERNEL);
-	if (!hexium)
-		return -ENOMEM;
-
-	/* enable i2c-port pins */
-	saa7146_write(dev, MC1, (MASK_08 | MASK_24 | MASK_10 | MASK_26));
-
-	saa7146_write(dev, DD1_INIT, 0x01000100);
-	saa7146_write(dev, DD1_STREAM_B, 0x00000000);
-	saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26));
-
-	strscpy(hexium->i2c_adapter.name, "hexium orion",
-		sizeof(hexium->i2c_adapter.name));
-	saa7146_i2c_adapter_prepare(dev, &hexium->i2c_adapter, SAA7146_I2C_BUS_BIT_RATE_480);
-	if (i2c_add_adapter(&hexium->i2c_adapter) < 0) {
-		DEB_S("cannot register i2c-device. skipping.\n");
-		kfree(hexium);
-		return -EFAULT;
-	}
-
-	/* set SAA7110 control GPIO 0 */
-	saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTHI);
-	/*  set HWControl GPIO number 2 */
-	saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTHI);
-
-	mdelay(10);
-
-	/* detect newer Hexium Orion cards by subsystem ids */
-	if (0x17c8 == dev->pci->subsystem_vendor && 0x0101 == dev->pci->subsystem_device) {
-		pr_info("device is a Hexium Orion w/ 1 SVHS + 3 BNC inputs\n");
-		/* we store the pointer in our private data field */
-		dev->ext_priv = hexium;
-		hexium->type = HEXIUM_ORION_1SVHS_3BNC;
-		return 0;
-	}
-
-	if (0x17c8 == dev->pci->subsystem_vendor && 0x2101 == dev->pci->subsystem_device) {
-		pr_info("device is a Hexium Orion w/ 4 BNC inputs\n");
-		/* we store the pointer in our private data field */
-		dev->ext_priv = hexium;
-		hexium->type = HEXIUM_ORION_4BNC;
-		return 0;
-	}
-
-	/* check if this is an old hexium Orion card by looking at
-	   a saa7110 at address 0x4e */
-	err = i2c_smbus_xfer(&hexium->i2c_adapter, 0x4e, 0, I2C_SMBUS_READ,
-			     0x00, I2C_SMBUS_BYTE_DATA, &data);
-	if (err == 0) {
-		pr_info("device is a Hexium HV-PCI6/Orion (old)\n");
-		/* we store the pointer in our private data field */
-		dev->ext_priv = hexium;
-		hexium->type = HEXIUM_HV_PCI6_ORION;
-		return 0;
-	}
-
-	i2c_del_adapter(&hexium->i2c_adapter);
-	kfree(hexium);
-	return -EFAULT;
-}
-
-/* bring hardware to a sane state. this has to be done, just in case someone
-   wants to capture from this device before it has been properly initialized.
-   the capture engine would badly fail, because no valid signal arrives on the
-   saa7146, thus leading to timeouts and stuff. */
-static int hexium_init_done(struct saa7146_dev *dev)
-{
-	struct hexium *hexium = (struct hexium *) dev->ext_priv;
-	union i2c_smbus_data data;
-	int i = 0;
-
-	DEB_D("hexium_init_done called\n");
-
-	/* initialize the helper ics to useful values */
-	for (i = 0; i < sizeof(hexium_saa7110); i++) {
-		data.byte = hexium_saa7110[i];
-		if (0 != i2c_smbus_xfer(&hexium->i2c_adapter, 0x4e, 0, I2C_SMBUS_WRITE, i, I2C_SMBUS_BYTE_DATA, &data)) {
-			pr_err("failed for address 0x%02x\n", i);
-		}
-	}
-
-	return 0;
-}
-
-static int hexium_set_input(struct hexium *hexium, int input)
-{
-	union i2c_smbus_data data;
-	int i = 0;
-
-	DEB_D("\n");
-
-	for (i = 0; i < 8; i++) {
-		int adr = hexium_input_select[input].data[i].adr;
-		data.byte = hexium_input_select[input].data[i].byte;
-		if (0 != i2c_smbus_xfer(&hexium->i2c_adapter, 0x4e, 0, I2C_SMBUS_WRITE, adr, I2C_SMBUS_BYTE_DATA, &data)) {
-			return -1;
-		}
-		pr_debug("%d: 0x%02x => 0x%02x\n", input, adr, data.byte);
-	}
-
-	return 0;
-}
-
-static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i)
-{
-	DEB_EE("VIDIOC_ENUMINPUT %d\n", i->index);
-
-	if (i->index >= HEXIUM_INPUTS)
-		return -EINVAL;
-
-	memcpy(i, &hexium_inputs[i->index], sizeof(struct v4l2_input));
-
-	DEB_D("v4l2_ioctl: VIDIOC_ENUMINPUT %d\n", i->index);
-	return 0;
-}
-
-static int vidioc_g_input(struct file *file, void *fh, unsigned int *input)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-	struct hexium *hexium = (struct hexium *) dev->ext_priv;
-
-	*input = hexium->cur_input;
-
-	DEB_D("VIDIOC_G_INPUT: %d\n", *input);
-	return 0;
-}
-
-static int vidioc_s_input(struct file *file, void *fh, unsigned int input)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-	struct hexium *hexium = (struct hexium *) dev->ext_priv;
-
-	if (input >= HEXIUM_INPUTS)
-		return -EINVAL;
-
-	hexium->cur_input = input;
-	hexium_set_input(hexium, input);
-
-	return 0;
-}
-
-static struct saa7146_ext_vv vv_data;
-
-/* this function only gets called when the probing was successful */
-static int hexium_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
-{
-	struct hexium *hexium = (struct hexium *) dev->ext_priv;
-	int ret;
-
-	DEB_EE("\n");
-
-	ret = saa7146_vv_init(dev, &vv_data);
-	if (ret) {
-		pr_err("Error in saa7146_vv_init()\n");
-		return ret;
-	}
-
-	vv_data.vid_ops.vidioc_enum_input = vidioc_enum_input;
-	vv_data.vid_ops.vidioc_g_input = vidioc_g_input;
-	vv_data.vid_ops.vidioc_s_input = vidioc_s_input;
-	if (0 != saa7146_register_device(&hexium->video_dev, dev, "hexium orion", VFL_TYPE_VIDEO)) {
-		pr_err("cannot register capture v4l2 device. skipping.\n");
-		return -1;
-	}
-
-	pr_err("found 'hexium orion' frame grabber-%d\n", hexium_num);
-	hexium_num++;
-
-	/* the rest */
-	hexium->cur_input = 0;
-	hexium_init_done(dev);
-
-	return 0;
-}
-
-static int hexium_detach(struct saa7146_dev *dev)
-{
-	struct hexium *hexium = (struct hexium *) dev->ext_priv;
-
-	DEB_EE("dev:%p\n", dev);
-
-	saa7146_unregister_device(&hexium->video_dev, dev);
-	saa7146_vv_release(dev);
-
-	hexium_num--;
-
-	i2c_del_adapter(&hexium->i2c_adapter);
-	kfree(hexium);
-	return 0;
-}
-
-static int std_callback(struct saa7146_dev *dev, struct saa7146_standard *std)
-{
-	return 0;
-}
-
-static struct saa7146_extension extension;
-
-static struct saa7146_pci_extension_data hexium_hv_pci6 = {
-	.ext_priv = "Hexium HV-PCI6 / Orion",
-	.ext = &extension,
-};
-
-static struct saa7146_pci_extension_data hexium_orion_1svhs_3bnc = {
-	.ext_priv = "Hexium HV-PCI6 / Orion (1 SVHS/3 BNC)",
-	.ext = &extension,
-};
-
-static struct saa7146_pci_extension_data hexium_orion_4bnc = {
-	.ext_priv = "Hexium HV-PCI6 / Orion (4 BNC)",
-	.ext = &extension,
-};
-
-static const struct pci_device_id pci_tbl[] = {
-	{
-	 .vendor = PCI_VENDOR_ID_PHILIPS,
-	 .device = PCI_DEVICE_ID_PHILIPS_SAA7146,
-	 .subvendor = 0x0000,
-	 .subdevice = 0x0000,
-	 .driver_data = (unsigned long) &hexium_hv_pci6,
-	 },
-	{
-	 .vendor = PCI_VENDOR_ID_PHILIPS,
-	 .device = PCI_DEVICE_ID_PHILIPS_SAA7146,
-	 .subvendor = 0x17c8,
-	 .subdevice = 0x0101,
-	 .driver_data = (unsigned long) &hexium_orion_1svhs_3bnc,
-	 },
-	{
-	 .vendor = PCI_VENDOR_ID_PHILIPS,
-	 .device = PCI_DEVICE_ID_PHILIPS_SAA7146,
-	 .subvendor = 0x17c8,
-	 .subdevice = 0x2101,
-	 .driver_data = (unsigned long) &hexium_orion_4bnc,
-	 },
-	{
-	 .vendor = 0,
-	 }
-};
-
-MODULE_DEVICE_TABLE(pci, pci_tbl);
-
-static struct saa7146_ext_vv vv_data = {
-	.inputs = HEXIUM_INPUTS,
-	.capabilities = 0,
-	.stds = &hexium_standards[0],
-	.num_stds = ARRAY_SIZE(hexium_standards),
-	.std_callback = &std_callback,
-};
-
-static struct saa7146_extension extension = {
-	.name = "hexium HV-PCI6 Orion",
-	.flags = 0,		// SAA7146_USE_I2C_IRQ,
-
-	.pci_tbl = &pci_tbl[0],
-	.module = THIS_MODULE,
-
-	.probe = hexium_probe,
-	.attach = hexium_attach,
-	.detach = hexium_detach,
-
-	.irq_mask = 0,
-	.irq_func = NULL,
-};
-
-static int __init hexium_init_module(void)
-{
-	if (0 != saa7146_register_extension(&extension)) {
-		DEB_S("failed to register extension\n");
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
-static void __exit hexium_cleanup_module(void)
-{
-	saa7146_unregister_extension(&extension);
-}
-
-module_init(hexium_init_module);
-module_exit(hexium_cleanup_module);
-
-MODULE_DESCRIPTION("video4linux-2 driver for Hexium Orion frame grabber cards");
-MODULE_AUTHOR("Michael Hunold <michael@mihu.de>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/media/deprecated/saa7146/saa7146/mxb.c b/drivers/staging/media/deprecated/saa7146/saa7146/mxb.c
deleted file mode 100644
index 3e568f952dae..000000000000
--- a/drivers/staging/media/deprecated/saa7146/saa7146/mxb.c
+++ /dev/null
@@ -1,873 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
-    mxb - v4l2 driver for the Multimedia eXtension Board
-
-    Copyright (C) 1998-2006 Michael Hunold <michael@mihu.de>
-
-    Visit http://www.themm.net/~mihu/linux/saa7146/mxb.html
-    for further details about this card.
-
-*/
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#define DEBUG_VARIABLE debug
-
-#include <media/tuner.h>
-#include <media/v4l2-common.h>
-#include <media/i2c/saa7115.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-
-#include "../common/saa7146_vv.h"
-#include "tea6415c.h"
-#include "tea6420.h"
-
-#define MXB_AUDIOS	6
-
-#define I2C_SAA7111A  0x24
-#define	I2C_TDA9840   0x42
-#define	I2C_TEA6415C  0x43
-#define	I2C_TEA6420_1 0x4c
-#define	I2C_TEA6420_2 0x4d
-#define	I2C_TUNER     0x60
-
-#define MXB_BOARD_CAN_DO_VBI(dev)   (dev->revision != 0)
-
-/* global variable */
-static int mxb_num;
-
-/* initial frequence the tuner will be tuned to.
-   in verden (lower saxony, germany) 4148 is a
-   channel called "phoenix" */
-static int freq = 4148;
-module_param(freq, int, 0644);
-MODULE_PARM_DESC(freq, "initial frequency the tuner will be tuned to while setup");
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off).");
-
-#define MXB_INPUTS 4
-enum { TUNER, AUX1, AUX3, AUX3_YC };
-
-static struct v4l2_input mxb_inputs[MXB_INPUTS] = {
-	{ TUNER,   "Tuner",          V4L2_INPUT_TYPE_TUNER,  0x3f, 0,
-		V4L2_STD_PAL_BG | V4L2_STD_PAL_I, 0, V4L2_IN_CAP_STD },
-	{ AUX1,	   "AUX1",           V4L2_INPUT_TYPE_CAMERA, 0x3f, 0,
-		V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
-	{ AUX3,	   "AUX3 Composite", V4L2_INPUT_TYPE_CAMERA, 0x3f, 0,
-		V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
-	{ AUX3_YC, "AUX3 S-Video",   V4L2_INPUT_TYPE_CAMERA, 0x3f, 0,
-		V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
-};
-
-/* this array holds the information, which port of the saa7146 each
-   input actually uses. the mxb uses port 0 for every input */
-static struct {
-	int hps_source;
-	int hps_sync;
-} input_port_selection[MXB_INPUTS] = {
-	{ SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A },
-	{ SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A },
-	{ SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A },
-	{ SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A },
-};
-
-/* this array holds the information of the audio source (mxb_audios),
-   which has to be switched corresponding to the video source (mxb_channels) */
-static int video_audio_connect[MXB_INPUTS] =
-	{ 0, 1, 3, 3 };
-
-struct mxb_routing {
-	u32 input;
-	u32 output;
-};
-
-/* these are the available audio sources, which can switched
-   to the line- and cd-output individually */
-static struct v4l2_audio mxb_audios[MXB_AUDIOS] = {
-	    {
-		.index	= 0,
-		.name	= "Tuner",
-		.capability = V4L2_AUDCAP_STEREO,
-	} , {
-		.index	= 1,
-		.name	= "AUX1",
-		.capability = V4L2_AUDCAP_STEREO,
-	} , {
-		.index	= 2,
-		.name	= "AUX2",
-		.capability = V4L2_AUDCAP_STEREO,
-	} , {
-		.index	= 3,
-		.name	= "AUX3",
-		.capability = V4L2_AUDCAP_STEREO,
-	} , {
-		.index	= 4,
-		.name	= "Radio (X9)",
-		.capability = V4L2_AUDCAP_STEREO,
-	} , {
-		.index	= 5,
-		.name	= "CD-ROM (X10)",
-		.capability = V4L2_AUDCAP_STEREO,
-	}
-};
-
-/* These are the necessary input-output-pins for bringing one audio source
-   (see above) to the CD-output. Note that gain is set to 0 in this table. */
-static struct mxb_routing TEA6420_cd[MXB_AUDIOS + 1][2] = {
-	{ { 1, 1 }, { 1, 1 } },	/* Tuner */
-	{ { 5, 1 }, { 6, 1 } },	/* AUX 1 */
-	{ { 4, 1 }, { 6, 1 } },	/* AUX 2 */
-	{ { 3, 1 }, { 6, 1 } },	/* AUX 3 */
-	{ { 1, 1 }, { 3, 1 } },	/* Radio */
-	{ { 1, 1 }, { 2, 1 } },	/* CD-Rom */
-	{ { 6, 1 }, { 6, 1 } }	/* Mute */
-};
-
-/* These are the necessary input-output-pins for bringing one audio source
-   (see above) to the line-output. Note that gain is set to 0 in this table. */
-static struct mxb_routing TEA6420_line[MXB_AUDIOS + 1][2] = {
-	{ { 2, 3 }, { 1, 2 } },
-	{ { 5, 3 }, { 6, 2 } },
-	{ { 4, 3 }, { 6, 2 } },
-	{ { 3, 3 }, { 6, 2 } },
-	{ { 2, 3 }, { 3, 2 } },
-	{ { 2, 3 }, { 2, 2 } },
-	{ { 6, 3 }, { 6, 2 } }	/* Mute */
-};
-
-struct mxb
-{
-	struct video_device	video_dev;
-	struct video_device	vbi_dev;
-
-	struct i2c_adapter	i2c_adapter;
-
-	struct v4l2_subdev	*saa7111a;
-	struct v4l2_subdev	*tda9840;
-	struct v4l2_subdev	*tea6415c;
-	struct v4l2_subdev	*tuner;
-	struct v4l2_subdev	*tea6420_1;
-	struct v4l2_subdev	*tea6420_2;
-
-	int	cur_mode;	/* current audio mode (mono, stereo, ...) */
-	int	cur_input;	/* current input */
-	int	cur_audinput;	/* current audio input */
-	int	cur_mute;	/* current mute status */
-	struct v4l2_frequency	cur_freq;	/* current frequency the tuner is tuned to */
-};
-
-#define saa7111a_call(mxb, o, f, args...) \
-	v4l2_subdev_call(mxb->saa7111a, o, f, ##args)
-#define tda9840_call(mxb, o, f, args...) \
-	v4l2_subdev_call(mxb->tda9840, o, f, ##args)
-#define tea6415c_call(mxb, o, f, args...) \
-	v4l2_subdev_call(mxb->tea6415c, o, f, ##args)
-#define tuner_call(mxb, o, f, args...) \
-	v4l2_subdev_call(mxb->tuner, o, f, ##args)
-#define call_all(dev, o, f, args...) \
-	v4l2_device_call_until_err(&dev->v4l2_dev, 0, o, f, ##args)
-
-static void mxb_update_audmode(struct mxb *mxb)
-{
-	struct v4l2_tuner t = {
-		.audmode = mxb->cur_mode,
-	};
-
-	tda9840_call(mxb, tuner, s_tuner, &t);
-}
-
-static inline void tea6420_route(struct mxb *mxb, int idx)
-{
-	v4l2_subdev_call(mxb->tea6420_1, audio, s_routing,
-		TEA6420_cd[idx][0].input, TEA6420_cd[idx][0].output, 0);
-	v4l2_subdev_call(mxb->tea6420_2, audio, s_routing,
-		TEA6420_cd[idx][1].input, TEA6420_cd[idx][1].output, 0);
-	v4l2_subdev_call(mxb->tea6420_1, audio, s_routing,
-		TEA6420_line[idx][0].input, TEA6420_line[idx][0].output, 0);
-	v4l2_subdev_call(mxb->tea6420_2, audio, s_routing,
-		TEA6420_line[idx][1].input, TEA6420_line[idx][1].output, 0);
-}
-
-static struct saa7146_extension extension;
-
-static int mxb_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct saa7146_dev *dev = container_of(ctrl->handler,
-				struct saa7146_dev, ctrl_handler);
-	struct mxb *mxb = dev->ext_priv;
-
-	switch (ctrl->id) {
-	case V4L2_CID_AUDIO_MUTE:
-		mxb->cur_mute = ctrl->val;
-		/* switch the audio-source */
-		tea6420_route(mxb, ctrl->val ? 6 :
-				video_audio_connect[mxb->cur_input]);
-		break;
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static const struct v4l2_ctrl_ops mxb_ctrl_ops = {
-	.s_ctrl = mxb_s_ctrl,
-};
-
-static int mxb_probe(struct saa7146_dev *dev)
-{
-	struct v4l2_ctrl_handler *hdl = &dev->ctrl_handler;
-	struct mxb *mxb = NULL;
-
-	v4l2_ctrl_new_std(hdl, &mxb_ctrl_ops,
-			V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
-	if (hdl->error)
-		return hdl->error;
-	mxb = kzalloc(sizeof(struct mxb), GFP_KERNEL);
-	if (mxb == NULL) {
-		DEB_D("not enough kernel memory\n");
-		return -ENOMEM;
-	}
-
-
-	snprintf(mxb->i2c_adapter.name, sizeof(mxb->i2c_adapter.name), "mxb%d", mxb_num);
-
-	saa7146_i2c_adapter_prepare(dev, &mxb->i2c_adapter, SAA7146_I2C_BUS_BIT_RATE_480);
-	if (i2c_add_adapter(&mxb->i2c_adapter) < 0) {
-		DEB_S("cannot register i2c-device. skipping.\n");
-		kfree(mxb);
-		return -EFAULT;
-	}
-
-	mxb->saa7111a = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
-			"saa7111", I2C_SAA7111A, NULL);
-	mxb->tea6420_1 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
-			"tea6420", I2C_TEA6420_1, NULL);
-	mxb->tea6420_2 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
-			"tea6420", I2C_TEA6420_2, NULL);
-	mxb->tea6415c = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
-			"tea6415c", I2C_TEA6415C, NULL);
-	mxb->tda9840 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
-			"tda9840", I2C_TDA9840, NULL);
-	mxb->tuner = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
-			"tuner", I2C_TUNER, NULL);
-
-	/* check if all devices are present */
-	if (!mxb->tea6420_1 || !mxb->tea6420_2 || !mxb->tea6415c ||
-	    !mxb->tda9840 || !mxb->saa7111a || !mxb->tuner) {
-		pr_err("did not find all i2c devices. aborting\n");
-		i2c_del_adapter(&mxb->i2c_adapter);
-		kfree(mxb);
-		return -ENODEV;
-	}
-
-	/* all devices are present, probe was successful */
-
-	/* we store the pointer in our private data field */
-	dev->ext_priv = mxb;
-
-	v4l2_ctrl_handler_setup(hdl);
-
-	return 0;
-}
-
-/* some init data for the saa7740, the so-called 'sound arena module'.
-   there are no specs available, so we simply use some init values */
-static struct {
-	int	length;
-	char	data[9];
-} mxb_saa7740_init[] = {
-	{ 3, { 0x80, 0x00, 0x00 } },{ 3, { 0x80, 0x89, 0x00 } },
-	{ 3, { 0x80, 0xb0, 0x0a } },{ 3, { 0x00, 0x00, 0x00 } },
-	{ 3, { 0x49, 0x00, 0x00 } },{ 3, { 0x4a, 0x00, 0x00 } },
-	{ 3, { 0x4b, 0x00, 0x00 } },{ 3, { 0x4c, 0x00, 0x00 } },
-	{ 3, { 0x4d, 0x00, 0x00 } },{ 3, { 0x4e, 0x00, 0x00 } },
-	{ 3, { 0x4f, 0x00, 0x00 } },{ 3, { 0x50, 0x00, 0x00 } },
-	{ 3, { 0x51, 0x00, 0x00 } },{ 3, { 0x52, 0x00, 0x00 } },
-	{ 3, { 0x53, 0x00, 0x00 } },{ 3, { 0x54, 0x00, 0x00 } },
-	{ 3, { 0x55, 0x00, 0x00 } },{ 3, { 0x56, 0x00, 0x00 } },
-	{ 3, { 0x57, 0x00, 0x00 } },{ 3, { 0x58, 0x00, 0x00 } },
-	{ 3, { 0x59, 0x00, 0x00 } },{ 3, { 0x5a, 0x00, 0x00 } },
-	{ 3, { 0x5b, 0x00, 0x00 } },{ 3, { 0x5c, 0x00, 0x00 } },
-	{ 3, { 0x5d, 0x00, 0x00 } },{ 3, { 0x5e, 0x00, 0x00 } },
-	{ 3, { 0x5f, 0x00, 0x00 } },{ 3, { 0x60, 0x00, 0x00 } },
-	{ 3, { 0x61, 0x00, 0x00 } },{ 3, { 0x62, 0x00, 0x00 } },
-	{ 3, { 0x63, 0x00, 0x00 } },{ 3, { 0x64, 0x00, 0x00 } },
-	{ 3, { 0x65, 0x00, 0x00 } },{ 3, { 0x66, 0x00, 0x00 } },
-	{ 3, { 0x67, 0x00, 0x00 } },{ 3, { 0x68, 0x00, 0x00 } },
-	{ 3, { 0x69, 0x00, 0x00 } },{ 3, { 0x6a, 0x00, 0x00 } },
-	{ 3, { 0x6b, 0x00, 0x00 } },{ 3, { 0x6c, 0x00, 0x00 } },
-	{ 3, { 0x6d, 0x00, 0x00 } },{ 3, { 0x6e, 0x00, 0x00 } },
-	{ 3, { 0x6f, 0x00, 0x00 } },{ 3, { 0x70, 0x00, 0x00 } },
-	{ 3, { 0x71, 0x00, 0x00 } },{ 3, { 0x72, 0x00, 0x00 } },
-	{ 3, { 0x73, 0x00, 0x00 } },{ 3, { 0x74, 0x00, 0x00 } },
-	{ 3, { 0x75, 0x00, 0x00 } },{ 3, { 0x76, 0x00, 0x00 } },
-	{ 3, { 0x77, 0x00, 0x00 } },{ 3, { 0x41, 0x00, 0x42 } },
-	{ 3, { 0x42, 0x10, 0x42 } },{ 3, { 0x43, 0x20, 0x42 } },
-	{ 3, { 0x44, 0x30, 0x42 } },{ 3, { 0x45, 0x00, 0x01 } },
-	{ 3, { 0x46, 0x00, 0x01 } },{ 3, { 0x47, 0x00, 0x01 } },
-	{ 3, { 0x48, 0x00, 0x01 } },
-	{ 9, { 0x01, 0x03, 0xc5, 0x5c, 0x7a, 0x85, 0x01, 0x00, 0x54 } },
-	{ 9, { 0x21, 0x03, 0xc5, 0x5c, 0x7a, 0x85, 0x01, 0x00, 0x54 } },
-	{ 9, { 0x09, 0x0b, 0xb4, 0x6b, 0x74, 0x85, 0x95, 0x00, 0x34 } },
-	{ 9, { 0x29, 0x0b, 0xb4, 0x6b, 0x74, 0x85, 0x95, 0x00, 0x34 } },
-	{ 9, { 0x11, 0x17, 0x43, 0x62, 0x68, 0x89, 0xd1, 0xff, 0xb0 } },
-	{ 9, { 0x31, 0x17, 0x43, 0x62, 0x68, 0x89, 0xd1, 0xff, 0xb0 } },
-	{ 9, { 0x19, 0x20, 0x62, 0x51, 0x5a, 0x95, 0x19, 0x01, 0x50 } },
-	{ 9, { 0x39, 0x20, 0x62, 0x51, 0x5a, 0x95, 0x19, 0x01, 0x50 } },
-	{ 9, { 0x05, 0x3e, 0xd2, 0x69, 0x4e, 0x9a, 0x51, 0x00, 0xf0 } },
-	{ 9, { 0x25, 0x3e, 0xd2, 0x69, 0x4e, 0x9a, 0x51, 0x00, 0xf0 } },
-	{ 9, { 0x0d, 0x3d, 0xa1, 0x40, 0x7d, 0x9f, 0x29, 0xfe, 0x14 } },
-	{ 9, { 0x2d, 0x3d, 0xa1, 0x40, 0x7d, 0x9f, 0x29, 0xfe, 0x14 } },
-	{ 9, { 0x15, 0x73, 0xa1, 0x50, 0x5d, 0xa6, 0xf5, 0xfe, 0x38 } },
-	{ 9, { 0x35, 0x73, 0xa1, 0x50, 0x5d, 0xa6, 0xf5, 0xfe, 0x38 } },
-	{ 9, { 0x1d, 0xed, 0xd0, 0x68, 0x29, 0xb4, 0xe1, 0x00, 0xb8 } },
-	{ 9, { 0x3d, 0xed, 0xd0, 0x68, 0x29, 0xb4, 0xe1, 0x00, 0xb8 } },
-	{ 3, { 0x80, 0xb3, 0x0a } },
-	{-1, { 0 } }
-};
-
-/* bring hardware to a sane state. this has to be done, just in case someone
-   wants to capture from this device before it has been properly initialized.
-   the capture engine would badly fail, because no valid signal arrives on the
-   saa7146, thus leading to timeouts and stuff. */
-static int mxb_init_done(struct saa7146_dev* dev)
-{
-	struct mxb* mxb = (struct mxb*)dev->ext_priv;
-	struct i2c_msg msg;
-	struct tuner_setup tun_setup;
-	v4l2_std_id std = V4L2_STD_PAL_BG;
-
-	int i, err = 0;
-
-	/* mute audio on tea6420s */
-	tea6420_route(mxb, 6);
-
-	/* select video mode in saa7111a */
-	saa7111a_call(mxb, video, s_std, std);
-
-	/* select tuner-output on saa7111a */
-	saa7111a_call(mxb, video, s_routing, SAA7115_COMPOSITE0,
-		SAA7111_FMT_CCIR, 0);
-
-	/* select a tuner type */
-	tun_setup.mode_mask = T_ANALOG_TV;
-	tun_setup.addr = ADDR_UNSET;
-	tun_setup.type = TUNER_PHILIPS_PAL;
-	tuner_call(mxb, tuner, s_type_addr, &tun_setup);
-	/* tune in some frequency on tuner */
-	mxb->cur_freq.tuner = 0;
-	mxb->cur_freq.type = V4L2_TUNER_ANALOG_TV;
-	mxb->cur_freq.frequency = freq;
-	tuner_call(mxb, tuner, s_frequency, &mxb->cur_freq);
-
-	/* set a default video standard */
-	/* These two gpio calls set the GPIO pins that control the tda9820 */
-	saa7146_write(dev, GPIO_CTRL, 0x00404050);
-	saa7111a_call(mxb, core, s_gpio, 1);
-	saa7111a_call(mxb, video, s_std, std);
-	tuner_call(mxb, video, s_std, std);
-
-	/* switch to tuner-channel on tea6415c */
-	tea6415c_call(mxb, video, s_routing, 3, 17, 0);
-
-	/* select tuner-output on multicable on tea6415c */
-	tea6415c_call(mxb, video, s_routing, 3, 13, 0);
-
-	/* the rest for mxb */
-	mxb->cur_input = 0;
-	mxb->cur_audinput = video_audio_connect[mxb->cur_input];
-	mxb->cur_mute = 1;
-
-	mxb->cur_mode = V4L2_TUNER_MODE_STEREO;
-	mxb_update_audmode(mxb);
-
-	/* check if the saa7740 (aka 'sound arena module') is present
-	   on the mxb. if so, we must initialize it. due to lack of
-	   information about the saa7740, the values were reverse
-	   engineered. */
-	msg.addr = 0x1b;
-	msg.flags = 0;
-	msg.len = mxb_saa7740_init[0].length;
-	msg.buf = &mxb_saa7740_init[0].data[0];
-
-	err = i2c_transfer(&mxb->i2c_adapter, &msg, 1);
-	if (err == 1) {
-		/* the sound arena module is a pos, that's probably the reason
-		   philips refuses to hand out a datasheet for the saa7740...
-		   it seems to screw up the i2c bus, so we disable fast irq
-		   based i2c transactions here and rely on the slow and safe
-		   polling method ... */
-		extension.flags &= ~SAA7146_USE_I2C_IRQ;
-		for (i = 1; ; i++) {
-			if (-1 == mxb_saa7740_init[i].length)
-				break;
-
-			msg.len = mxb_saa7740_init[i].length;
-			msg.buf = &mxb_saa7740_init[i].data[0];
-			err = i2c_transfer(&mxb->i2c_adapter, &msg, 1);
-			if (err != 1) {
-				DEB_D("failed to initialize 'sound arena module'\n");
-				goto err;
-			}
-		}
-		pr_info("'sound arena module' detected\n");
-	}
-err:
-	/* the rest for saa7146: you should definitely set some basic values
-	   for the input-port handling of the saa7146. */
-
-	/* ext->saa has been filled by the core driver */
-
-	/* some stuff is done via variables */
-	saa7146_set_hps_source_and_sync(dev, input_port_selection[mxb->cur_input].hps_source,
-			input_port_selection[mxb->cur_input].hps_sync);
-
-	/* some stuff is done via direct write to the registers */
-
-	/* this is ugly, but because of the fact that this is completely
-	   hardware dependend, it should be done directly... */
-	saa7146_write(dev, DD1_STREAM_B,	0x00000000);
-	saa7146_write(dev, DD1_INIT,		0x02000200);
-	saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26));
-
-	return 0;
-}
-
-/* interrupt-handler. this gets called when irq_mask is != 0.
-   it must clear the interrupt-bits in irq_mask it has handled */
-/*
-void mxb_irq_bh(struct saa7146_dev* dev, u32* irq_mask)
-{
-	struct mxb* mxb = (struct mxb*)dev->ext_priv;
-}
-*/
-
-static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i)
-{
-	DEB_EE("VIDIOC_ENUMINPUT %d\n", i->index);
-	if (i->index >= MXB_INPUTS)
-		return -EINVAL;
-	memcpy(i, &mxb_inputs[i->index], sizeof(struct v4l2_input));
-	return 0;
-}
-
-static int vidioc_g_input(struct file *file, void *fh, unsigned int *i)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-	struct mxb *mxb = (struct mxb *)dev->ext_priv;
-	*i = mxb->cur_input;
-
-	DEB_EE("VIDIOC_G_INPUT %d\n", *i);
-	return 0;
-}
-
-static int vidioc_s_input(struct file *file, void *fh, unsigned int input)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-	struct mxb *mxb = (struct mxb *)dev->ext_priv;
-	int err = 0;
-	int i = 0;
-
-	DEB_EE("VIDIOC_S_INPUT %d\n", input);
-
-	if (input >= MXB_INPUTS)
-		return -EINVAL;
-
-	mxb->cur_input = input;
-
-	saa7146_set_hps_source_and_sync(dev, input_port_selection[input].hps_source,
-			input_port_selection[input].hps_sync);
-
-	/* prepare switching of tea6415c and saa7111a;
-	   have a look at the 'background'-file for further information  */
-	switch (input) {
-	case TUNER:
-		i = SAA7115_COMPOSITE0;
-
-		err = tea6415c_call(mxb, video, s_routing, 3, 17, 0);
-
-		/* connect tuner-output always to multicable */
-		if (!err)
-			err = tea6415c_call(mxb, video, s_routing, 3, 13, 0);
-		break;
-	case AUX3_YC:
-		/* nothing to be done here. aux3_yc is
-		   directly connected to the saa711a */
-		i = SAA7115_SVIDEO1;
-		break;
-	case AUX3:
-		/* nothing to be done here. aux3 is
-		   directly connected to the saa711a */
-		i = SAA7115_COMPOSITE1;
-		break;
-	case AUX1:
-		i = SAA7115_COMPOSITE0;
-		err = tea6415c_call(mxb, video, s_routing, 1, 17, 0);
-		break;
-	}
-
-	if (err)
-		return err;
-
-	/* switch video in saa7111a */
-	if (saa7111a_call(mxb, video, s_routing, i, SAA7111_FMT_CCIR, 0))
-		pr_err("VIDIOC_S_INPUT: could not address saa7111a\n");
-
-	mxb->cur_audinput = video_audio_connect[input];
-	/* switch the audio-source only if necessary */
-	if (0 == mxb->cur_mute)
-		tea6420_route(mxb, mxb->cur_audinput);
-	if (mxb->cur_audinput == 0)
-		mxb_update_audmode(mxb);
-
-	return 0;
-}
-
-static int vidioc_g_tuner(struct file *file, void *fh, struct v4l2_tuner *t)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-	struct mxb *mxb = (struct mxb *)dev->ext_priv;
-
-	if (t->index) {
-		DEB_D("VIDIOC_G_TUNER: channel %d does not have a tuner attached\n",
-		      t->index);
-		return -EINVAL;
-	}
-
-	DEB_EE("VIDIOC_G_TUNER: %d\n", t->index);
-
-	memset(t, 0, sizeof(*t));
-	strscpy(t->name, "TV Tuner", sizeof(t->name));
-	t->type = V4L2_TUNER_ANALOG_TV;
-	t->capability = V4L2_TUNER_CAP_NORM | V4L2_TUNER_CAP_STEREO |
-			V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP;
-	t->audmode = mxb->cur_mode;
-	return call_all(dev, tuner, g_tuner, t);
-}
-
-static int vidioc_s_tuner(struct file *file, void *fh, const struct v4l2_tuner *t)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-	struct mxb *mxb = (struct mxb *)dev->ext_priv;
-
-	if (t->index) {
-		DEB_D("VIDIOC_S_TUNER: channel %d does not have a tuner attached\n",
-		      t->index);
-		return -EINVAL;
-	}
-
-	mxb->cur_mode = t->audmode;
-	return call_all(dev, tuner, s_tuner, t);
-}
-
-static int vidioc_querystd(struct file *file, void *fh, v4l2_std_id *norm)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-
-	return call_all(dev, video, querystd, norm);
-}
-
-static int vidioc_g_frequency(struct file *file, void *fh, struct v4l2_frequency *f)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-	struct mxb *mxb = (struct mxb *)dev->ext_priv;
-
-	if (f->tuner)
-		return -EINVAL;
-	*f = mxb->cur_freq;
-
-	DEB_EE("VIDIOC_G_FREQ: freq:0x%08x\n", mxb->cur_freq.frequency);
-	return 0;
-}
-
-static int vidioc_s_frequency(struct file *file, void *fh, const struct v4l2_frequency *f)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-	struct mxb *mxb = (struct mxb *)dev->ext_priv;
-	struct saa7146_vv *vv = dev->vv_data;
-
-	if (f->tuner)
-		return -EINVAL;
-
-	if (V4L2_TUNER_ANALOG_TV != f->type)
-		return -EINVAL;
-
-	DEB_EE("VIDIOC_S_FREQUENCY: freq:0x%08x\n", mxb->cur_freq.frequency);
-
-	/* tune in desired frequency */
-	tuner_call(mxb, tuner, s_frequency, f);
-	/* let the tuner subdev clamp the frequency to the tuner range */
-	mxb->cur_freq = *f;
-	tuner_call(mxb, tuner, g_frequency, &mxb->cur_freq);
-	if (mxb->cur_audinput == 0)
-		mxb_update_audmode(mxb);
-
-	if (mxb->cur_input)
-		return 0;
-
-	/* hack: changing the frequency should invalidate the vbi-counter (=> alevt) */
-	spin_lock(&dev->slock);
-	vv->vbi_fieldcount = 0;
-	spin_unlock(&dev->slock);
-
-	return 0;
-}
-
-static int vidioc_enumaudio(struct file *file, void *fh, struct v4l2_audio *a)
-{
-	if (a->index >= MXB_AUDIOS)
-		return -EINVAL;
-	*a = mxb_audios[a->index];
-	return 0;
-}
-
-static int vidioc_g_audio(struct file *file, void *fh, struct v4l2_audio *a)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-	struct mxb *mxb = (struct mxb *)dev->ext_priv;
-
-	DEB_EE("VIDIOC_G_AUDIO\n");
-	*a = mxb_audios[mxb->cur_audinput];
-	return 0;
-}
-
-static int vidioc_s_audio(struct file *file, void *fh, const struct v4l2_audio *a)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-	struct mxb *mxb = (struct mxb *)dev->ext_priv;
-
-	DEB_D("VIDIOC_S_AUDIO %d\n", a->index);
-	if (a->index >= 32 ||
-	    !(mxb_inputs[mxb->cur_input].audioset & (1 << a->index)))
-		return -EINVAL;
-
-	if (mxb->cur_audinput != a->index) {
-		mxb->cur_audinput = a->index;
-		tea6420_route(mxb, a->index);
-		if (mxb->cur_audinput == 0)
-			mxb_update_audmode(mxb);
-	}
-	return 0;
-}
-
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-static int vidioc_g_register(struct file *file, void *fh, struct v4l2_dbg_register *reg)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-
-	if (reg->reg > pci_resource_len(dev->pci, 0) - 4)
-		return -EINVAL;
-	reg->val = saa7146_read(dev, reg->reg);
-	reg->size = 4;
-	return 0;
-}
-
-static int vidioc_s_register(struct file *file, void *fh, const struct v4l2_dbg_register *reg)
-{
-	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
-
-	if (reg->reg > pci_resource_len(dev->pci, 0) - 4)
-		return -EINVAL;
-	saa7146_write(dev, reg->reg, reg->val);
-	return 0;
-}
-#endif
-
-static struct saa7146_ext_vv vv_data;
-
-/* this function only gets called when the probing was successful */
-static int mxb_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
-{
-	struct mxb *mxb;
-	int ret;
-
-	DEB_EE("dev:%p\n", dev);
-
-	ret = saa7146_vv_init(dev, &vv_data);
-	if (ret) {
-		ERR("Error in saa7146_vv_init()");
-		return ret;
-	}
-
-	if (mxb_probe(dev)) {
-		saa7146_vv_release(dev);
-		return -1;
-	}
-	mxb = (struct mxb *)dev->ext_priv;
-
-	vv_data.vid_ops.vidioc_enum_input = vidioc_enum_input;
-	vv_data.vid_ops.vidioc_g_input = vidioc_g_input;
-	vv_data.vid_ops.vidioc_s_input = vidioc_s_input;
-	vv_data.vid_ops.vidioc_querystd = vidioc_querystd;
-	vv_data.vid_ops.vidioc_g_tuner = vidioc_g_tuner;
-	vv_data.vid_ops.vidioc_s_tuner = vidioc_s_tuner;
-	vv_data.vid_ops.vidioc_g_frequency = vidioc_g_frequency;
-	vv_data.vid_ops.vidioc_s_frequency = vidioc_s_frequency;
-	vv_data.vid_ops.vidioc_enumaudio = vidioc_enumaudio;
-	vv_data.vid_ops.vidioc_g_audio = vidioc_g_audio;
-	vv_data.vid_ops.vidioc_s_audio = vidioc_s_audio;
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	vv_data.vid_ops.vidioc_g_register = vidioc_g_register;
-	vv_data.vid_ops.vidioc_s_register = vidioc_s_register;
-#endif
-	if (saa7146_register_device(&mxb->video_dev, dev, "mxb", VFL_TYPE_VIDEO)) {
-		ERR("cannot register capture v4l2 device. skipping.\n");
-		saa7146_vv_release(dev);
-		return -1;
-	}
-
-	/* initialization stuff (vbi) (only for revision > 0 and for extensions which want it)*/
-	if (MXB_BOARD_CAN_DO_VBI(dev)) {
-		if (saa7146_register_device(&mxb->vbi_dev, dev, "mxb", VFL_TYPE_VBI)) {
-			ERR("cannot register vbi v4l2 device. skipping.\n");
-		}
-	}
-
-	pr_info("found Multimedia eXtension Board #%d\n", mxb_num);
-
-	mxb_num++;
-	mxb_init_done(dev);
-	return 0;
-}
-
-static int mxb_detach(struct saa7146_dev *dev)
-{
-	struct mxb *mxb = (struct mxb *)dev->ext_priv;
-
-	DEB_EE("dev:%p\n", dev);
-
-	/* mute audio on tea6420s */
-	tea6420_route(mxb, 6);
-
-	saa7146_unregister_device(&mxb->video_dev,dev);
-	if (MXB_BOARD_CAN_DO_VBI(dev))
-		saa7146_unregister_device(&mxb->vbi_dev, dev);
-	saa7146_vv_release(dev);
-
-	mxb_num--;
-
-	i2c_del_adapter(&mxb->i2c_adapter);
-	kfree(mxb);
-
-	return 0;
-}
-
-static int std_callback(struct saa7146_dev *dev, struct saa7146_standard *standard)
-{
-	struct mxb *mxb = (struct mxb *)dev->ext_priv;
-
-	if (V4L2_STD_PAL_I == standard->id) {
-		v4l2_std_id std = V4L2_STD_PAL_I;
-
-		DEB_D("VIDIOC_S_STD: setting mxb for PAL_I\n");
-		/* These two gpio calls set the GPIO pins that control the tda9820 */
-		saa7146_write(dev, GPIO_CTRL, 0x00404050);
-		saa7111a_call(mxb, core, s_gpio, 0);
-		saa7111a_call(mxb, video, s_std, std);
-		if (mxb->cur_input == 0)
-			tuner_call(mxb, video, s_std, std);
-	} else {
-		v4l2_std_id std = V4L2_STD_PAL_BG;
-
-		if (mxb->cur_input)
-			std = standard->id;
-		DEB_D("VIDIOC_S_STD: setting mxb for PAL/NTSC/SECAM\n");
-		/* These two gpio calls set the GPIO pins that control the tda9820 */
-		saa7146_write(dev, GPIO_CTRL, 0x00404050);
-		saa7111a_call(mxb, core, s_gpio, 1);
-		saa7111a_call(mxb, video, s_std, std);
-		if (mxb->cur_input == 0)
-			tuner_call(mxb, video, s_std, std);
-	}
-	return 0;
-}
-
-static struct saa7146_standard standard[] = {
-	{
-		.name	= "PAL-BG",	.id	= V4L2_STD_PAL_BG,
-		.v_offset	= 0x17,	.v_field	= 288,
-		.h_offset	= 0x14,	.h_pixels	= 680,
-		.v_max_out	= 576,	.h_max_out	= 768,
-	}, {
-		.name	= "PAL-I",	.id	= V4L2_STD_PAL_I,
-		.v_offset	= 0x17,	.v_field	= 288,
-		.h_offset	= 0x14,	.h_pixels	= 680,
-		.v_max_out	= 576,	.h_max_out	= 768,
-	}, {
-		.name	= "NTSC",	.id	= V4L2_STD_NTSC,
-		.v_offset	= 0x16,	.v_field	= 240,
-		.h_offset	= 0x06,	.h_pixels	= 708,
-		.v_max_out	= 480,	.h_max_out	= 640,
-	}, {
-		.name	= "SECAM",	.id	= V4L2_STD_SECAM,
-		.v_offset	= 0x14,	.v_field	= 288,
-		.h_offset	= 0x14,	.h_pixels	= 720,
-		.v_max_out	= 576,	.h_max_out	= 768,
-	}
-};
-
-static struct saa7146_pci_extension_data mxb = {
-	.ext_priv = "Multimedia eXtension Board",
-	.ext = &extension,
-};
-
-static const struct pci_device_id pci_tbl[] = {
-	{
-		.vendor    = PCI_VENDOR_ID_PHILIPS,
-		.device	   = PCI_DEVICE_ID_PHILIPS_SAA7146,
-		.subvendor = 0x0000,
-		.subdevice = 0x0000,
-		.driver_data = (unsigned long)&mxb,
-	}, {
-		.vendor	= 0,
-	}
-};
-
-MODULE_DEVICE_TABLE(pci, pci_tbl);
-
-static struct saa7146_ext_vv vv_data = {
-	.inputs		= MXB_INPUTS,
-	.capabilities	= V4L2_CAP_TUNER | V4L2_CAP_VBI_CAPTURE | V4L2_CAP_AUDIO,
-	.stds		= &standard[0],
-	.num_stds	= ARRAY_SIZE(standard),
-	.std_callback	= &std_callback,
-};
-
-static struct saa7146_extension extension = {
-	.name		= "Multimedia eXtension Board",
-	.flags		= SAA7146_USE_I2C_IRQ,
-
-	.pci_tbl	= &pci_tbl[0],
-	.module		= THIS_MODULE,
-
-	.attach		= mxb_attach,
-	.detach		= mxb_detach,
-
-	.irq_mask	= 0,
-	.irq_func	= NULL,
-};
-
-static int __init mxb_init_module(void)
-{
-	if (saa7146_register_extension(&extension)) {
-		DEB_S("failed to register extension\n");
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
-static void __exit mxb_cleanup_module(void)
-{
-	saa7146_unregister_extension(&extension);
-}
-
-module_init(mxb_init_module);
-module_exit(mxb_cleanup_module);
-
-MODULE_DESCRIPTION("video4linux-2 driver for the Siemens-Nixdorf 'Multimedia eXtension board'");
-MODULE_AUTHOR("Michael Hunold <michael@mihu.de>");
-MODULE_LICENSE("GPL");
