@@ -1120,6 +1120,34 @@ static int imx290_get_regulators(struct device *dev, struct imx290 *imx290)
imx290->supplies);
}
+static int imx290_init_clk(struct imx290 *imx290)
+{
+ u32 xclk_freq;
+ int ret;
+
+ ret = fwnode_property_read_u32(dev_fwnode(imx290->dev),
+ "clock-frequency", &xclk_freq);
+ if (ret) {
+ dev_err(imx290->dev, "Could not get xclk frequency\n");
+ return ret;
+ }
+
+ /* external clock must be 37.125 MHz */
+ if (xclk_freq != 37125000) {
+ dev_err(imx290->dev, "External clock frequency %u is not supported\n",
+ xclk_freq);
+ return -EINVAL;
+ }
+
+ ret = clk_set_rate(imx290->xclk, xclk_freq);
+ if (ret) {
+ dev_err(imx290->dev, "Could not set xclk frequency\n");
+ return ret;
+ }
+
+ return 0;
+}
+
/*
* Returns 0 if all link frequencies used by the driver for the given number
* of MIPI data lanes are mentioned in the device tree, or the value of the
@@ -1204,7 +1232,6 @@ static int imx290_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
struct imx290 *imx290;
- u32 xclk_freq;
int ret;
imx290 = devm_kzalloc(dev, sizeof(*imx290), GFP_KERNEL);
@@ -1222,32 +1249,12 @@ static int imx290_probe(struct i2c_client *client)
if (ret)
return ret;
- /* get system clock (xclk) */
+ /* Acquire resources. */
imx290->xclk = devm_clk_get(dev, "xclk");
if (IS_ERR(imx290->xclk))
return dev_err_probe(dev, PTR_ERR(imx290->xclk),
"Could not get xclk");
- ret = fwnode_property_read_u32(dev_fwnode(dev), "clock-frequency",
- &xclk_freq);
- if (ret) {
- dev_err(dev, "Could not get xclk frequency\n");
- return ret;
- }
-
- /* external clock must be 37.125 MHz */
- if (xclk_freq != 37125000) {
- dev_err(dev, "External clock frequency %u is not supported\n",
- xclk_freq);
- return -EINVAL;
- }
-
- ret = clk_set_rate(imx290->xclk, xclk_freq);
- if (ret) {
- dev_err(dev, "Could not set xclk frequency\n");
- return ret;
- }
-
ret = imx290_get_regulators(dev, imx290);
if (ret < 0)
return dev_err_probe(dev, ret, "Cannot get regulators\n");
@@ -1258,8 +1265,14 @@ static int imx290_probe(struct i2c_client *client)
return dev_err_probe(dev, PTR_ERR(imx290->rst_gpio),
"Cannot get reset gpio\n");
+ /* Initialize external clock frequency. */
+ ret = imx290_init_clk(imx290);
+ if (ret)
+ return ret;
+
mutex_init(&imx290->lock);
+ /* Initialize and register subdev. */
ret = imx290_subdev_init(imx290);
if (ret)
goto err_mutex;