diff mbox series

[v2,13/15] media: atomisp: csi2-bridge: Switch to new common ipu_bridge_init()

Message ID 20230630110643.209761-14-hdegoede@redhat.com
State New
Headers show
Series media: ipu-bridge: Shared with atomisp, rework VCM instantiation | expand

Commit Message

Hans de Goede June 30, 2023, 11:06 a.m. UTC 
Remove the duplicate IPU ACPI bridge code and use the new
shared ipu_bridge_init() functionality.

Note this will also use / assume v4l2-async device instantation for
ov5693 sensors on atomisp devices since ipu_supported_sensors[]
already contains a match for this.

This is fine since recent atomisp improvements allow the atomisp code
to work with generic v4l2 sensor drivers and using an unmodified
drivers/media/i2c/ov5693.c has been successfully tested on
an Acer Iconia W4 820 tablet with Bay an ISP2400 + OV5693 sensor.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/staging/media/atomisp/Kconfig         |   2 +
 .../staging/media/atomisp/pci/atomisp_csi2.h  |  67 ----
 .../media/atomisp/pci/atomisp_csi2_bridge.c   | 326 +++---------------
 .../staging/media/atomisp/pci/atomisp_v4l2.c  |   1 +
 4 files changed, 48 insertions(+), 348 deletions(-)

Comments

Daniel Scally July 4, 2023, 1:55 p.m. UTC | #1 
Hi Both

On 30/06/2023 16:45, Andy Shevchenko wrote:
> On Fri, Jun 30, 2023 at 2:07 PM Hans de Goede <hdegoede@redhat.com> wrote:
>> Remove the duplicate IPU ACPI bridge code and use the new
>> shared ipu_bridge_init() functionality.
>>
>> Note this will also use / assume v4l2-async device instantation for
> instantiation
>
>> ov5693 sensors on atomisp devices since ipu_supported_sensors[]
>> already contains a match for this.
>>
>> This is fine since recent atomisp improvements allow the atomisp code
>> to work with generic v4l2 sensor drivers and using an unmodified
>> drivers/media/i2c/ov5693.c has been successfully tested on
>> an Acer Iconia W4 820 tablet with Bay an ISP2400 + OV5693 sensor.
> with an?
> with Bay Trail and ?
>
> This is a cool patch!
>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
>
> A few remarks below.
>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>> ---
>>   drivers/staging/media/atomisp/Kconfig         |   2 +
>>   .../staging/media/atomisp/pci/atomisp_csi2.h  |  67 ----
>>   .../media/atomisp/pci/atomisp_csi2_bridge.c   | 326 +++---------------
>>   .../staging/media/atomisp/pci/atomisp_v4l2.c  |   1 +
>>   4 files changed, 48 insertions(+), 348 deletions(-)
>>
>> diff --git a/drivers/staging/media/atomisp/Kconfig b/drivers/staging/media/atomisp/Kconfig
>> index e9b168ba97bf..1c1007362e21 100644
>> --- a/drivers/staging/media/atomisp/Kconfig
>> +++ b/drivers/staging/media/atomisp/Kconfig
>> @@ -12,9 +12,11 @@ menuconfig INTEL_ATOMISP
>>   config VIDEO_ATOMISP
>>          tristate "Intel Atom Image Signal Processor Driver"
>>          depends on VIDEO_DEV && INTEL_ATOMISP
>> +       depends on MEDIA_PCI_SUPPORT && I2C
> These two on a single "depends on" line makes me confused.
> I would split the PCI part from the I2C one. However, I haven't
> checked the context of other media drivers, maybe this is an existing
> idiom, in that case let it be.
>
>>          depends on PMIC_OPREGION
>>          select V4L2_FWNODE
>>          select IOSF_MBI
>> +       select IPU_BRIDGE
>>          select VIDEOBUF2_VMALLOC
>>          select VIDEO_V4L2_SUBDEV_API
>>          help
>> diff --git a/drivers/staging/media/atomisp/pci/atomisp_csi2.h b/drivers/staging/media/atomisp/pci/atomisp_csi2.h
>> index 16ddb3ab2963..8a112acba1e0 100644
>> --- a/drivers/staging/media/atomisp/pci/atomisp_csi2.h
>> +++ b/drivers/staging/media/atomisp/pci/atomisp_csi2.h
>> @@ -30,9 +30,6 @@
>>   #define CSI2_PAD_SOURCE                1
>>   #define CSI2_PADS_NUM          2
>>
>> -#define CSI2_MAX_LANES         4
>> -#define CSI2_MAX_LINK_FREQS    3
>> -
>>   #define CSI2_MAX_ACPI_GPIOS    2u
>>
>>   struct acpi_device;
>> @@ -55,70 +52,6 @@ struct atomisp_csi2_acpi_gpio_parsing_data {
>>          unsigned int map_count;
>>   };
>>
>> -enum atomisp_csi2_sensor_swnodes {
>> -       SWNODE_SENSOR,
>> -       SWNODE_SENSOR_PORT,
>> -       SWNODE_SENSOR_ENDPOINT,
>> -       SWNODE_CSI2_PORT,
>> -       SWNODE_CSI2_ENDPOINT,
>> -       SWNODE_COUNT
>> -};
>> -
>> -struct atomisp_csi2_property_names {
>> -       char clock_frequency[16];
>> -       char rotation[9];
>> -       char bus_type[9];
>> -       char data_lanes[11];
>> -       char remote_endpoint[16];
>> -       char link_frequencies[17];
>> -};
>> -
>> -struct atomisp_csi2_node_names {
>> -       char port[7];
>> -       char endpoint[11];
>> -       char remote_port[7];
>> -};
>> -
>> -struct atomisp_csi2_sensor_config {
>> -       const char *hid;
>> -       int lanes;
>> -       int nr_link_freqs;
>> -       u64 link_freqs[CSI2_MAX_LINK_FREQS];
>> -};
>> -
>> -struct atomisp_csi2_sensor {
>> -       /* Append port in "-%u" format as suffix of HID */
>> -       char name[ACPI_ID_LEN + 4];
>> -       struct acpi_device *adev;
>> -       int port;
>> -       int lanes;
>> -
>> -       /* SWNODE_COUNT + 1 for terminating NULL */
>> -       const struct software_node *group[SWNODE_COUNT + 1];
>> -       struct software_node swnodes[SWNODE_COUNT];
>> -       struct atomisp_csi2_node_names node_names;
>> -       struct atomisp_csi2_property_names prop_names;
>> -       /* "clock-frequency", "rotation" + terminating entry */
>> -       struct property_entry dev_properties[3];
>> -       /* "bus-type", "data-lanes", "remote-endpoint" + "link-freq" + terminating entry */
>> -       struct property_entry ep_properties[5];
>> -       /* "data-lanes", "remote-endpoint" + terminating entry */
>> -       struct property_entry csi2_properties[3];
>> -       struct software_node_ref_args local_ref[1];
>> -       struct software_node_ref_args remote_ref[1];
>> -       struct software_node_ref_args vcm_ref[1];
>> -       /* GPIO mappings storage */
>> -       struct atomisp_csi2_acpi_gpio_map gpio_map;
>> -};
>> -
>> -struct atomisp_csi2_bridge {
>> -       struct software_node csi2_node;
>> -       char csi2_node_name[14];
>> -       u32 data_lanes[CSI2_MAX_LANES];
>> -       unsigned int n_sensors;
>> -       struct atomisp_csi2_sensor sensors[ATOMISP_CAMERA_NR_PORTS];
>> -};
>> -
>>   struct atomisp_mipi_csi2_device {
>>          struct v4l2_subdev subdev;
>>          struct media_pad pads[CSI2_PADS_NUM];
>> diff --git a/drivers/staging/media/atomisp/pci/atomisp_csi2_bridge.c b/drivers/staging/media/atomisp/pci/atomisp_csi2_bridge.c
>> index 0d12ba78d9c1..d7b8c3de0e17 100644
>> --- a/drivers/staging/media/atomisp/pci/atomisp_csi2_bridge.c
>> +++ b/drivers/staging/media/atomisp/pci/atomisp_csi2_bridge.c
>> @@ -14,31 +14,14 @@
>>   #include <linux/device.h>
>>   #include <linux/dmi.h>
>>   #include <linux/property.h>
>> +
>> +#include <media/ipu-bridge.h>
>>   #include <media/v4l2-fwnode.h>
>>
>>   #include "atomisp_cmd.h"
>>   #include "atomisp_csi2.h"
>>   #include "atomisp_internal.h"
>>
>> -#define NODE_SENSOR(_HID, _PROPS)              \
>> -       ((const struct software_node) {         \
>> -               .name = _HID,                   \
>> -               .properties = _PROPS,           \
>> -       })
>> -
>> -#define NODE_PORT(_PORT, _SENSOR_NODE)         \
>> -       ((const struct software_node) {         \
>> -               .name = _PORT,                  \
>> -               .parent = _SENSOR_NODE,         \
>> -       })
>> -
>> -#define NODE_ENDPOINT(_EP, _PORT, _PROPS)      \
>> -       ((const struct software_node) {         \
>> -               .name = _EP,                    \
>> -               .parent = _PORT,                \
>> -               .properties = _PROPS,           \
>> -       })
>> -
>>   #define PMC_CLK_RATE_19_2MHZ                   19200000
>>
>>   /*
>> @@ -83,21 +66,6 @@ static const guid_t atomisp_dsm_guid =
>>          GUID_INIT(0xdc2f6c4f, 0x045b, 0x4f1d,
>>                    0x97, 0xb9, 0x88, 0x2a, 0x68, 0x60, 0xa4, 0xbe);
>>
>> -/*
>> - * Extend this array with ACPI Hardware IDs of sensors known to be working
>> - * plus the default number of links + link-frequencies.
>> - *
>> - * Do not add an entry for a sensor that is not actually supported,
>> - * or which have not yet been converted to work without atomisp_gmin
>> - * power-management and with v4l2-async probing.
>> - */
>> -static const struct atomisp_csi2_sensor_config supported_sensors[] = {
>> -       /* GalaxyCore GC0310 */
>> -       { "INT0310", 1 },
>> -       /* Omnivision OV2680 */
>> -       { "OVTI2680", 1 },
>> -};
>> -
>>   /*
>>    * gmin_cfg parsing code. This is a cleaned up version of the gmin_cfg parsing
>>    * code from atomisp_gmin_platform.c.
>> @@ -400,8 +368,7 @@ static int atomisp_csi2_handle_acpi_gpio_res(struct acpi_resource *ares, void *_
>>    * the INT3472 discrete.c code and there is some overlap, but there are
>>    * enough differences that it is difficult to share the code.
>>    */
>> -static int atomisp_csi2_add_gpio_mappings(struct atomisp_csi2_sensor *sensor,
>> -                                         struct acpi_device *adev)
>> +static int atomisp_csi2_add_gpio_mappings(struct acpi_device *adev)
>>   {
>>          struct atomisp_csi2_acpi_gpio_parsing_data data = { };
>>          LIST_HEAD(resource_list);
>> @@ -469,9 +436,12 @@ static int atomisp_csi2_add_gpio_mappings(struct atomisp_csi2_sensor *sensor,
>>                  }
>>          }
>>
>> +       data.map = kzalloc(sizeof(*data.map), GFP_KERNEL);
>> +       if (!data.map)
>> +               return -ENOMEM;
>> +
>>          /* Now parse the ACPI resources and build the lookup table */
>>          data.adev = adev;
>> -       data.map = &sensor->gpio_map;
>>          ret = acpi_dev_get_resources(adev, &resource_list,
>>                                       atomisp_csi2_handle_acpi_gpio_res, &data);
>>          if (ret < 0)
>> @@ -491,220 +461,59 @@ static int atomisp_csi2_add_gpio_mappings(struct atomisp_csi2_sensor *sensor,
>>          return ret;
>>   }
>>
>> -static const struct atomisp_csi2_property_names prop_names = {
>> -       .clock_frequency = "clock-frequency",
>> -       .rotation = "rotation",
>> -       .bus_type = "bus-type",
>> -       .data_lanes = "data-lanes",
>> -       .remote_endpoint = "remote-endpoint",
>> -       .link_frequencies = "link-frequencies",
>> -};
>> -
>> -static void atomisp_csi2_create_fwnode_properties(struct atomisp_csi2_sensor *sensor,
>> -                                                 struct atomisp_csi2_bridge *bridge,
>> -                                                 const struct atomisp_csi2_sensor_config *cfg)
>> +static int atomisp_csi2_parse_sensor_fwnode(struct acpi_device *adev,
>> +                                           struct ipu_sensor *sensor)
>>   {
>> -       sensor->prop_names = prop_names;
>> +       static const struct acpi_device_id dual_lane_sensors[] = {
>> +               { "INT33BE" },  /* OV5693 */
>> +               {}
>> +       };
>> +       int ret, clock_num, lanes;
>>
>> -       sensor->local_ref[0] = SOFTWARE_NODE_REFERENCE(&sensor->swnodes[SWNODE_CSI2_ENDPOINT]);
>> -       sensor->remote_ref[0] = SOFTWARE_NODE_REFERENCE(&sensor->swnodes[SWNODE_SENSOR_ENDPOINT]);
>> +       /*
>> +        * ACPI takes care of turning the PMC clock on and off, but on BYT
>> +        * the clock defaults to 25 MHz instead of the expected 19.2 MHz.
>> +        * Get the PMC-clock number from ACPI PR0 method and set it to 19.2 MHz.
>> +        * The PMC-clock number is also used to determine the default CSI port.
>> +        */
>> +       clock_num = atomisp_csi2_get_pmc_clk_nr_from_acpi_pr0(adev);
>>
>> -       sensor->dev_properties[0] = PROPERTY_ENTRY_U32(sensor->prop_names.clock_frequency,
>> -                                                      PMC_CLK_RATE_19_2MHZ);
>> -       sensor->dev_properties[1] = PROPERTY_ENTRY_U32(sensor->prop_names.rotation, 0);
>> +       ret = atomisp_csi2_set_pmc_clk_freq(adev, clock_num);
>> +       if (ret)
>> +               return ret;
>>
>> -       sensor->ep_properties[0] = PROPERTY_ENTRY_U32(sensor->prop_names.bus_type,
>> -                                                     V4L2_FWNODE_BUS_TYPE_CSI2_DPHY);
>> -       sensor->ep_properties[1] = PROPERTY_ENTRY_U32_ARRAY_LEN(sensor->prop_names.data_lanes,
>> -                                                               bridge->data_lanes,
>> -                                                               sensor->lanes);
>> -       sensor->ep_properties[2] = PROPERTY_ENTRY_REF_ARRAY(sensor->prop_names.remote_endpoint,
>> -                                                           sensor->local_ref);
>> -       if (cfg->nr_link_freqs > 0)
>> -               sensor->ep_properties[3] =
>> -                       PROPERTY_ENTRY_U64_ARRAY_LEN(sensor->prop_names.link_frequencies,
>> -                                                    cfg->link_freqs, cfg->nr_link_freqs);
>> -
>> -       sensor->csi2_properties[0] = PROPERTY_ENTRY_U32_ARRAY_LEN(sensor->prop_names.data_lanes,
>> -                                                                 bridge->data_lanes,
>> -                                                                 sensor->lanes);
>> -       sensor->csi2_properties[1] = PROPERTY_ENTRY_REF_ARRAY(sensor->prop_names.remote_endpoint,
>> -                                                             sensor->remote_ref);
>> -}
>> -
>> -static void atomisp_csi2_init_swnode_names(struct atomisp_csi2_sensor *sensor)
>> -{
>> -       snprintf(sensor->node_names.remote_port,
>> -                sizeof(sensor->node_names.remote_port),
>> -                SWNODE_GRAPH_PORT_NAME_FMT, sensor->port);
>> -       snprintf(sensor->node_names.port,
>> -                sizeof(sensor->node_names.port),
>> -                SWNODE_GRAPH_PORT_NAME_FMT, 0); /* Always port 0 */
>> -       snprintf(sensor->node_names.endpoint,
>> -                sizeof(sensor->node_names.endpoint),
>> -                SWNODE_GRAPH_ENDPOINT_NAME_FMT, 0); /* And endpoint 0 */
>> -}
>> -
>> -static void atomisp_csi2_init_swnode_group(struct atomisp_csi2_sensor *sensor)
>> -{
>> -       struct software_node *nodes = sensor->swnodes;
>> -
>> -       sensor->group[SWNODE_SENSOR] = &nodes[SWNODE_SENSOR];
>> -       sensor->group[SWNODE_SENSOR_PORT] = &nodes[SWNODE_SENSOR_PORT];
>> -       sensor->group[SWNODE_SENSOR_ENDPOINT] = &nodes[SWNODE_SENSOR_ENDPOINT];
>> -       sensor->group[SWNODE_CSI2_PORT] = &nodes[SWNODE_CSI2_PORT];
>> -       sensor->group[SWNODE_CSI2_ENDPOINT] = &nodes[SWNODE_CSI2_ENDPOINT];
>> -}
>> -
>> -static void atomisp_csi2_create_connection_swnodes(struct atomisp_csi2_bridge *bridge,
>> -                                                  struct atomisp_csi2_sensor *sensor)
>> -{
>> -       struct software_node *nodes = sensor->swnodes;
>> -
>> -       atomisp_csi2_init_swnode_names(sensor);
>> -
>> -       nodes[SWNODE_SENSOR] = NODE_SENSOR(sensor->name,
>> -                                          sensor->dev_properties);
>> -       nodes[SWNODE_SENSOR_PORT] = NODE_PORT(sensor->node_names.port,
>> -                                             &nodes[SWNODE_SENSOR]);
>> -       nodes[SWNODE_SENSOR_ENDPOINT] = NODE_ENDPOINT(sensor->node_names.endpoint,
>> -                                                     &nodes[SWNODE_SENSOR_PORT],
>> -                                                     sensor->ep_properties);
>> -       nodes[SWNODE_CSI2_PORT] = NODE_PORT(sensor->node_names.remote_port,
>> -                                           &bridge->csi2_node);
>> -       nodes[SWNODE_CSI2_ENDPOINT] = NODE_ENDPOINT(sensor->node_names.endpoint,
>> -                                                   &nodes[SWNODE_CSI2_PORT],
>> -                                                   sensor->csi2_properties);
>> -
>> -       atomisp_csi2_init_swnode_group(sensor);
>> -}
>> -
>> -static void atomisp_csi2_unregister_sensors(struct atomisp_csi2_bridge *bridge)
>> -{
>> -       struct atomisp_csi2_sensor *sensor;
>> -       unsigned int i;
>> -
>> -       for (i = 0; i < bridge->n_sensors; i++) {
>> -               sensor = &bridge->sensors[i];
>> -               software_node_unregister_node_group(sensor->group);
>> -               acpi_dev_remove_driver_gpios(sensor->adev);
>> -               acpi_dev_put(sensor->adev);
>> +       sensor->link = atomisp_csi2_get_port(adev, clock_num);
>> +       if (sensor->link >= ATOMISP_CAMERA_NR_PORTS) {
>> +               dev_err(&adev->dev, "Invalid port: %u\n", sensor->link);
>> +               return -EINVAL;
>>          }
>> -}
>>
>> -static int atomisp_csi2_connect_sensor(const struct atomisp_csi2_sensor_config *cfg,
>> -                                      struct atomisp_csi2_bridge *bridge,
>> -                                      struct atomisp_device *isp)
>> -{
>> -       struct fwnode_handle *fwnode, *primary;
>> -       struct atomisp_csi2_sensor *sensor;
>> -       struct acpi_device *adev;
>> -       int ret, clock_num;
>> +       if (!acpi_match_device_ids(adev, dual_lane_sensors))
>> +               lanes = 2;
>> +       else
>> +               lanes = 1;
> Can we use positive conditional?
>
>         if (acpi_match_device_ids(adev, dual_lane_sensors))
>                 lanes = 1;
>         else
>                 lanes = 2;


Or perhaps "if (acpi_match_device_ids(adev, dual_lane_sensors) == 0)"?


Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>

>
>> -       for_each_acpi_dev_match(adev, cfg->hid, NULL, -1) {
>> -               if (!adev->status.enabled)
>> -                       continue;
>> -
>> -               if (bridge->n_sensors >= ATOMISP_CAMERA_NR_PORTS) {
>> -                       dev_err(isp->dev, "Exceeded available CSI2 ports\n");
>> -                       ret = -EOVERFLOW;
>> -                       goto err_put_adev;
>> -               }
>> -
>> -               sensor = &bridge->sensors[bridge->n_sensors];
>> -
>> -               /*
>> -                * ACPI takes care of turning the PMC clock on and off, but on BYT
>> -                * the clock defaults to 25 MHz instead of the expected 19.2 MHz.
>> -                * Get the PMC-clock number from ACPI _PR0 method and set it to 19.2 MHz.
>> -                * The PMC-clock number is also used to determine the default CSI port.
>> -                */
>> -               clock_num = atomisp_csi2_get_pmc_clk_nr_from_acpi_pr0(adev);
>> -
>> -               ret = atomisp_csi2_set_pmc_clk_freq(adev, clock_num);
>> -               if (ret)
>> -                       goto err_put_adev;
>> -
>> -               sensor->port = atomisp_csi2_get_port(adev, clock_num);
>> -               if (sensor->port >= ATOMISP_CAMERA_NR_PORTS) {
>> -                       acpi_handle_err(adev->handle, "Invalid port: %d\n", sensor->port);
>> -                       ret = -EINVAL;
>> -                       goto err_put_adev;
>> -               }
>> -
>> -               sensor->lanes = gmin_cfg_get_int(adev, "CsiLanes", cfg->lanes);
>> -               if (sensor->lanes > CSI2_MAX_LANES) {
>> -                       acpi_handle_err(adev->handle, "Invalid number of lanes: %d\n", sensor->lanes);
>> -                       ret = -EINVAL;
>> -                       goto err_put_adev;
>> -               }
>> -
>> -               ret = atomisp_csi2_add_gpio_mappings(sensor, adev);
>> -               if (ret)
>> -                       goto err_put_adev;
>> -
>> -               snprintf(sensor->name, sizeof(sensor->name), "%s-%u",
>> -                        cfg->hid, sensor->port);
>> -
>> -               atomisp_csi2_create_fwnode_properties(sensor, bridge, cfg);
>> -               atomisp_csi2_create_connection_swnodes(bridge, sensor);
>> -
>> -               ret = software_node_register_node_group(sensor->group);
>> -               if (ret)
>> -                       goto err_remove_mappings;
>> -
>> -               fwnode = software_node_fwnode(&sensor->swnodes[SWNODE_SENSOR]);
>> -               if (!fwnode) {
>> -                       ret = -ENODEV;
>> -                       goto err_free_swnodes;
>> -               }
>> -
>> -               sensor->adev = acpi_dev_get(adev);
>> -
>> -               primary = acpi_fwnode_handle(adev);
>> -               primary->secondary = fwnode;
>> -
>> -               bridge->n_sensors++;
>> +       sensor->lanes = gmin_cfg_get_int(adev, "CsiLanes", lanes);
>> +       if (sensor->lanes > IPU_MAX_LANES) {
>> +               dev_err(&adev->dev, "Invalid lane-count: %d\n", sensor->lanes);
> Yeah, I think we would be consistent in using the ACPI handle to print
> the messages from ACPI sensor devices.
>
>> +               return -EINVAL;
>>          }
>>
>> +       ret = atomisp_csi2_add_gpio_mappings(adev);
>> +       if (ret)
>> +               return ret;
>> +
>> +       sensor->mclkspeed = PMC_CLK_RATE_19_2MHZ;
>> +       sensor->rotation = 0;
>> +       sensor->orientation = V4L2_FWNODE_ORIENTATION_EXTERNAL;
>> +
>>          return 0;
>> -
>> -err_free_swnodes:
>> -       software_node_unregister_node_group(sensor->group);
>> -err_remove_mappings:
>> -       acpi_dev_remove_driver_gpios(adev);
>> -err_put_adev:
>> -       acpi_dev_put(adev);
>> -       return ret;
>> -}
>> -
>> -static int atomisp_csi2_connect_sensors(struct atomisp_csi2_bridge *bridge,
>> -                                       struct atomisp_device *isp)
>> -{
>> -       unsigned int i;
>> -       int ret;
>> -
>> -       for (i = 0; i < ARRAY_SIZE(supported_sensors); i++) {
>> -               const struct atomisp_csi2_sensor_config *cfg = &supported_sensors[i];
>> -
>> -               ret = atomisp_csi2_connect_sensor(cfg, bridge, isp);
>> -               if (ret)
>> -                       goto err_unregister_sensors;
>> -       }
>> -
>> -       return 0;
>> -
>> -err_unregister_sensors:
>> -       atomisp_csi2_unregister_sensors(bridge);
>> -       return ret;
>>   }
>>
>>   int atomisp_csi2_bridge_init(struct atomisp_device *isp)
>>   {
>> -       struct atomisp_csi2_bridge *bridge;
>>          struct device *dev = isp->dev;
>>          struct fwnode_handle *fwnode;
>> -       int i, ret;
>>
>>          /*
>>           * This function is intended to run only once and then leave
>> @@ -716,52 +525,7 @@ int atomisp_csi2_bridge_init(struct atomisp_device *isp)
>>          if (fwnode && fwnode->secondary)
>>                  return 0;
>>
>> -       bridge = kzalloc(sizeof(*bridge), GFP_KERNEL);
>> -       if (!bridge)
>> -               return -ENOMEM;
>> -
>> -       strscpy(bridge->csi2_node_name, "atomisp-csi2", sizeof(bridge->csi2_node_name));
>> -       bridge->csi2_node.name = bridge->csi2_node_name;
>> -
>> -       ret = software_node_register(&bridge->csi2_node);
>> -       if (ret < 0) {
>> -               dev_err(dev, "Failed to register the CSI2 HID node\n");
>> -               goto err_free_bridge;
>> -       }
>> -
>> -       /*
>> -        * Map the lane arrangement, which is fixed for the ISP2 (meaning we
>> -        * only need one, rather than one per sensor). We include it as a
>> -        * member of the bridge struct rather than a global variable so
>> -        * that it survives if the module is unloaded along with the rest of
>> -        * the struct.
>> -        */
>> -       for (i = 0; i < CSI2_MAX_LANES; i++)
>> -               bridge->data_lanes[i] = i + 1;
>> -
>> -       ret = atomisp_csi2_connect_sensors(bridge, isp);
>> -       if (ret || bridge->n_sensors == 0)
>> -               goto err_unregister_csi2;
>> -
>> -       fwnode = software_node_fwnode(&bridge->csi2_node);
>> -       if (!fwnode) {
>> -               dev_err(dev, "Error getting fwnode from csi2 software_node\n");
>> -               ret = -ENODEV;
>> -               goto err_unregister_sensors;
>> -       }
>> -
>> -       set_secondary_fwnode(dev, fwnode);
>> -
>> -       return 0;
>> -
>> -err_unregister_sensors:
>> -       atomisp_csi2_unregister_sensors(bridge);
>> -err_unregister_csi2:
>> -       software_node_unregister(&bridge->csi2_node);
>> -err_free_bridge:
>> -       kfree(bridge);
>> -
>> -       return ret;
>> +       return ipu_bridge_init(dev, atomisp_csi2_parse_sensor_fwnode);
>>   }
>>
>>   /******* V4L2 sub-device asynchronous registration callbacks***********/
>> diff --git a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
>> index c43b916a006e..0d80f0893a2e 100644
>> --- a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
>> +++ b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
>> @@ -1615,3 +1615,4 @@ MODULE_AUTHOR("Wen Wang <wen.w.wang@intel.com>");
>>   MODULE_AUTHOR("Xiaolin Zhang <xiaolin.zhang@intel.com>");
>>   MODULE_LICENSE("GPL");
>>   MODULE_DESCRIPTION("Intel ATOM Platform ISP Driver");
>> +MODULE_IMPORT_NS(INTEL_IPU_BRIDGE);
>> --
>> 2.41.0
>>
>
Andy Shevchenko July 4, 2023, 2:32 p.m. UTC | #2 
On Tue, Jul 04, 2023 at 02:55:02PM +0100, Dan Scally wrote:
> On 30/06/2023 16:45, Andy Shevchenko wrote:
> > On Fri, Jun 30, 2023 at 2:07 PM Hans de Goede <hdegoede@redhat.com> wrote:

(Can you remove unneeded context when replying to the messages, please?)

...

> > > +       if (!acpi_match_device_ids(adev, dual_lane_sensors))
> > > +               lanes = 2;
> > > +       else
> > > +               lanes = 1;
> > Can we use positive conditional?
> > 
> >         if (acpi_match_device_ids(adev, dual_lane_sensors))
> >                 lanes = 1;
> >         else
> >                 lanes = 2;
> 
> Or perhaps "if (acpi_match_device_ids(adev, dual_lane_sensors) == 0)"?

Unfortunately this will be more confusing. The above mentioned API returns
the error code or 0 on success.

	ret = acpi_match_device_ids(adev, dual_lane_sensors);
        if (ret)
                lanes = 1;
        else
                lanes = 2;

probably is the best to have semantics of returned code more or less
easy to get.
Hans de Goede July 4, 2023, 3:49 p.m. UTC | #3 
Hi,

On 7/4/23 16:32, Andy Shevchenko wrote:
> On Tue, Jul 04, 2023 at 02:55:02PM +0100, Dan Scally wrote:
>> On 30/06/2023 16:45, Andy Shevchenko wrote:
>>> On Fri, Jun 30, 2023 at 2:07 PM Hans de Goede <hdegoede@redhat.com> wrote:
> 
> (Can you remove unneeded context when replying to the messages, please?)
> 
> ...
> 
>>>> +       if (!acpi_match_device_ids(adev, dual_lane_sensors))
>>>> +               lanes = 2;
>>>> +       else
>>>> +               lanes = 1;
>>> Can we use positive conditional?
>>>
>>>         if (acpi_match_device_ids(adev, dual_lane_sensors))
>>>                 lanes = 1;
>>>         else
>>>                 lanes = 2;
>>
>> Or perhaps "if (acpi_match_device_ids(adev, dual_lane_sensors) == 0)"?
> 
> Unfortunately this will be more confusing. The above mentioned API returns
> the error code or 0 on success.
> 
> 	ret = acpi_match_device_ids(adev, dual_lane_sensors);
>         if (ret)
>                 lanes = 1;
>         else
>                 lanes = 2;
> 
> probably is the best to have semantics of returned code more or less
> easy to get.

For adding vcm instantiation support I'm going to need more per-sensor
atomisp bridge specific data. So I'll switch this to using match-data
in the next version, using only match-data for sensors where lanes != 1
(or with a VCM, which usually are the same set of sensors).

Regards,

Hans
Hans de Goede July 4, 2023, 7:21 p.m. UTC | #4 
Hi,

On 6/30/23 16:45, Andy Shevchenko wrote:
>> +       sensor->lanes = gmin_cfg_get_int(adev, "CsiLanes", lanes);
>> +       if (sensor->lanes > IPU_MAX_LANES) {
>> +               dev_err(&adev->dev, "Invalid lane-count: %d\n", sensor->lanes);
> 
> Yeah, I think we would be consistent in using the ACPI handle to print
> the messages from ACPI sensor devices.

I do agree that we need to be consistent, but I regret having switched
to using the handle for this in the csi2-bridge code. The dmesg logs
this results in are much harder to read. Most devices typically have
2 different sensors and normally it is quite easy to see in the logs
which GPIOs, etc. are being used for the sensor.

But after the move to using the ACPI handle for logging the logs
show up prefixed with \_SB_.I2C2.CAM8 resp CAM2 rather then with
OVTI2680 and INT0310 making it much harder to figure on what
is going on (first need to do
"cat /sys/bus/i2c/devices/i2c-OVTI2680:00/firmware_node/path"
to find out which path belongs to which sensor).

So I would rather get rid of the handle based logging, because it
is very cumbersome to use.

I'll add an extra patch to the next version of the set to switch all
the logging to using the acpi_device for logging.

Regards,

Hans
Andy Shevchenko July 5, 2023, 8:41 a.m. UTC | #5 
On Tue, Jul 4, 2023 at 10:21 PM Hans de Goede <hdegoede@redhat.com> wrote:
> On 6/30/23 16:45, Andy Shevchenko wrote:

...

> >> +               dev_err(&adev->dev, "Invalid lane-count: %d\n", sensor->lanes);
> >
> > Yeah, I think we would be consistent in using the ACPI handle to print
> > the messages from ACPI sensor devices.
>
> I do agree that we need to be consistent, but I regret having switched
> to using the handle for this in the csi2-bridge code. The dmesg logs
> this results in are much harder to read. Most devices typically have
> 2 different sensors and normally it is quite easy to see in the logs
> which GPIOs, etc. are being used for the sensor.
>
> But after the move to using the ACPI handle for logging the logs
> show up prefixed with \_SB_.I2C2.CAM8 resp CAM2 rather then with
> OVTI2680 and INT0310 making it much harder to figure on what
> is going on (first need to do
> "cat /sys/bus/i2c/devices/i2c-OVTI2680:00/firmware_node/path"
> to find out which path belongs to which sensor).
>
> So I would rather get rid of the handle based logging, because it
> is very cumbersome to use.

I see, you are right. The ACPI handle may not be the best for Linux
kernel drivers.

> I'll add an extra patch to the next version of the set to switch all
> the logging to using the acpi_device for logging.

Sounds good.
Sakari Ailus July 5, 2023, 10:38 a.m. UTC | #6 
Hi Hans,

On Tue, Jul 04, 2023 at 09:21:47PM +0200, Hans de Goede wrote:
> Hi,
> 
> On 6/30/23 16:45, Andy Shevchenko wrote:
> >> +       sensor->lanes = gmin_cfg_get_int(adev, "CsiLanes", lanes);
> >> +       if (sensor->lanes > IPU_MAX_LANES) {
> >> +               dev_err(&adev->dev, "Invalid lane-count: %d\n", sensor->lanes);
> > 
> > Yeah, I think we would be consistent in using the ACPI handle to print
> > the messages from ACPI sensor devices.
> 
> I do agree that we need to be consistent, but I regret having switched
> to using the handle for this in the csi2-bridge code. The dmesg logs
> this results in are much harder to read. Most devices typically have
> 2 different sensors and normally it is quite easy to see in the logs
> which GPIOs, etc. are being used for the sensor.
> 
> But after the move to using the ACPI handle for logging the logs
> show up prefixed with \_SB_.I2C2.CAM8 resp CAM2 rather then with
> OVTI2680 and INT0310 making it much harder to figure on what
> is going on (first need to do
> "cat /sys/bus/i2c/devices/i2c-OVTI2680:00/firmware_node/path"
> to find out which path belongs to which sensor).

In cases such as the above, the developer probably needs to address issues
not in the sensor driver but in the ACPI tables (or in IPU bridge code). So
for this reason I'd prefer printing the device path instead of the HID
(which is also somewhat opaque).

> 
> So I would rather get rid of the handle based logging, because it
> is very cumbersome to use.

The V4L2 async and fwnode frameworks use handles, too, for the same reason.

That said, I don't mind printing device names either. AFAIR Laurent
actually proposed that recently for the V4L2 fwnode and even promised to
send a patch. :-)

> 
> I'll add an extra patch to the next version of the set to switch all
> the logging to using the acpi_device for logging.
Hans de Goede July 5, 2023, 10:51 a.m. UTC | #7 
Hi,

On 7/5/23 12:38, Sakari Ailus wrote:
> Hi Hans,
> 
> On Tue, Jul 04, 2023 at 09:21:47PM +0200, Hans de Goede wrote:
>> Hi,
>>
>> On 6/30/23 16:45, Andy Shevchenko wrote:
>>>> +       sensor->lanes = gmin_cfg_get_int(adev, "CsiLanes", lanes);
>>>> +       if (sensor->lanes > IPU_MAX_LANES) {
>>>> +               dev_err(&adev->dev, "Invalid lane-count: %d\n", sensor->lanes);
>>>
>>> Yeah, I think we would be consistent in using the ACPI handle to print
>>> the messages from ACPI sensor devices.
>>
>> I do agree that we need to be consistent, but I regret having switched
>> to using the handle for this in the csi2-bridge code. The dmesg logs
>> this results in are much harder to read. Most devices typically have
>> 2 different sensors and normally it is quite easy to see in the logs
>> which GPIOs, etc. are being used for the sensor.
>>
>> But after the move to using the ACPI handle for logging the logs
>> show up prefixed with \_SB_.I2C2.CAM8 resp CAM2 rather then with
>> OVTI2680 and INT0310 making it much harder to figure on what
>> is going on (first need to do
>> "cat /sys/bus/i2c/devices/i2c-OVTI2680:00/firmware_node/path"
>> to find out which path belongs to which sensor).
> 
> In cases such as the above, the developer probably needs to address issues
> not in the sensor driver but in the ACPI tables (or in IPU bridge code). So
> for this reason I'd prefer printing the device path instead of the HID
> (which is also somewhat opaque).
> 
>>
>> So I would rather get rid of the handle based logging, because it
>> is very cumbersome to use.
> 
> The V4L2 async and fwnode frameworks use handles, too, for the same reason.
> 
> That said, I don't mind printing device names either. AFAIR Laurent
> actually proposed that recently for the V4L2 fwnode and even promised to
> send a patch. :-)

Hmm, ok. I'll keep the acpi_handle logging then and add a " %s:", dev_name() to
the logs so that we log both the ACPI handle path and the dev-name / HID.

>> I'll add an extra patch to the next version of the set to switch all
>> the logging to using the acpi_device for logging.

So this extra patch is going to add logging of the dev_name() instead then.

Regards,

Hans
diff mbox series

Patch

diff --git a/drivers/staging/media/atomisp/Kconfig b/drivers/staging/media/atomisp/Kconfig
index e9b168ba97bf..1c1007362e21 100644
--- a/drivers/staging/media/atomisp/Kconfig
+++ b/drivers/staging/media/atomisp/Kconfig
@@ -12,9 +12,11 @@  menuconfig INTEL_ATOMISP
 config VIDEO_ATOMISP
 	tristate "Intel Atom Image Signal Processor Driver"
 	depends on VIDEO_DEV && INTEL_ATOMISP
+	depends on MEDIA_PCI_SUPPORT && I2C
 	depends on PMIC_OPREGION
 	select V4L2_FWNODE
 	select IOSF_MBI
+	select IPU_BRIDGE
 	select VIDEOBUF2_VMALLOC
 	select VIDEO_V4L2_SUBDEV_API
 	help
diff --git a/drivers/staging/media/atomisp/pci/atomisp_csi2.h b/drivers/staging/media/atomisp/pci/atomisp_csi2.h
index 16ddb3ab2963..8a112acba1e0 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_csi2.h
+++ b/drivers/staging/media/atomisp/pci/atomisp_csi2.h
@@ -30,9 +30,6 @@ 
 #define CSI2_PAD_SOURCE		1
 #define CSI2_PADS_NUM		2
 
-#define CSI2_MAX_LANES		4
-#define CSI2_MAX_LINK_FREQS	3
-
 #define CSI2_MAX_ACPI_GPIOS	2u
 
 struct acpi_device;
@@ -55,70 +52,6 @@  struct atomisp_csi2_acpi_gpio_parsing_data {
 	unsigned int map_count;
 };
 
-enum atomisp_csi2_sensor_swnodes {
-	SWNODE_SENSOR,
-	SWNODE_SENSOR_PORT,
-	SWNODE_SENSOR_ENDPOINT,
-	SWNODE_CSI2_PORT,
-	SWNODE_CSI2_ENDPOINT,
-	SWNODE_COUNT
-};
-
-struct atomisp_csi2_property_names {
-	char clock_frequency[16];
-	char rotation[9];
-	char bus_type[9];
-	char data_lanes[11];
-	char remote_endpoint[16];
-	char link_frequencies[17];
-};
-
-struct atomisp_csi2_node_names {
-	char port[7];
-	char endpoint[11];
-	char remote_port[7];
-};
-
-struct atomisp_csi2_sensor_config {
-	const char *hid;
-	int lanes;
-	int nr_link_freqs;
-	u64 link_freqs[CSI2_MAX_LINK_FREQS];
-};
-
-struct atomisp_csi2_sensor {
-	/* Append port in "-%u" format as suffix of HID */
-	char name[ACPI_ID_LEN + 4];
-	struct acpi_device *adev;
-	int port;
-	int lanes;
-
-	/* SWNODE_COUNT + 1 for terminating NULL */
-	const struct software_node *group[SWNODE_COUNT + 1];
-	struct software_node swnodes[SWNODE_COUNT];
-	struct atomisp_csi2_node_names node_names;
-	struct atomisp_csi2_property_names prop_names;
-	/* "clock-frequency", "rotation" + terminating entry */
-	struct property_entry dev_properties[3];
-	/* "bus-type", "data-lanes", "remote-endpoint" + "link-freq" + terminating entry */
-	struct property_entry ep_properties[5];
-	/* "data-lanes", "remote-endpoint" + terminating entry */
-	struct property_entry csi2_properties[3];
-	struct software_node_ref_args local_ref[1];
-	struct software_node_ref_args remote_ref[1];
-	struct software_node_ref_args vcm_ref[1];
-	/* GPIO mappings storage */
-	struct atomisp_csi2_acpi_gpio_map gpio_map;
-};
-
-struct atomisp_csi2_bridge {
-	struct software_node csi2_node;
-	char csi2_node_name[14];
-	u32 data_lanes[CSI2_MAX_LANES];
-	unsigned int n_sensors;
-	struct atomisp_csi2_sensor sensors[ATOMISP_CAMERA_NR_PORTS];
-};
-
 struct atomisp_mipi_csi2_device {
 	struct v4l2_subdev subdev;
 	struct media_pad pads[CSI2_PADS_NUM];
diff --git a/drivers/staging/media/atomisp/pci/atomisp_csi2_bridge.c b/drivers/staging/media/atomisp/pci/atomisp_csi2_bridge.c
index 0d12ba78d9c1..d7b8c3de0e17 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_csi2_bridge.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_csi2_bridge.c
@@ -14,31 +14,14 @@ 
 #include <linux/device.h>
 #include <linux/dmi.h>
 #include <linux/property.h>
+
+#include <media/ipu-bridge.h>
 #include <media/v4l2-fwnode.h>
 
 #include "atomisp_cmd.h"
 #include "atomisp_csi2.h"
 #include "atomisp_internal.h"
 
-#define NODE_SENSOR(_HID, _PROPS)		\
-	((const struct software_node) {		\
-		.name = _HID,			\
-		.properties = _PROPS,		\
-	})
-
-#define NODE_PORT(_PORT, _SENSOR_NODE)		\
-	((const struct software_node) {		\
-		.name = _PORT,			\
-		.parent = _SENSOR_NODE,		\
-	})
-
-#define NODE_ENDPOINT(_EP, _PORT, _PROPS)	\
-	((const struct software_node) {		\
-		.name = _EP,			\
-		.parent = _PORT,		\
-		.properties = _PROPS,		\
-	})
-
 #define PMC_CLK_RATE_19_2MHZ			19200000
 
 /*
@@ -83,21 +66,6 @@  static const guid_t atomisp_dsm_guid =
 	GUID_INIT(0xdc2f6c4f, 0x045b, 0x4f1d,
 		  0x97, 0xb9, 0x88, 0x2a, 0x68, 0x60, 0xa4, 0xbe);
 
-/*
- * Extend this array with ACPI Hardware IDs of sensors known to be working
- * plus the default number of links + link-frequencies.
- *
- * Do not add an entry for a sensor that is not actually supported,
- * or which have not yet been converted to work without atomisp_gmin
- * power-management and with v4l2-async probing.
- */
-static const struct atomisp_csi2_sensor_config supported_sensors[] = {
-	/* GalaxyCore GC0310 */
-	{ "INT0310", 1 },
-	/* Omnivision OV2680 */
-	{ "OVTI2680", 1 },
-};
-
 /*
  * gmin_cfg parsing code. This is a cleaned up version of the gmin_cfg parsing
  * code from atomisp_gmin_platform.c.
@@ -400,8 +368,7 @@  static int atomisp_csi2_handle_acpi_gpio_res(struct acpi_resource *ares, void *_
  * the INT3472 discrete.c code and there is some overlap, but there are
  * enough differences that it is difficult to share the code.
  */
-static int atomisp_csi2_add_gpio_mappings(struct atomisp_csi2_sensor *sensor,
-					  struct acpi_device *adev)
+static int atomisp_csi2_add_gpio_mappings(struct acpi_device *adev)
 {
 	struct atomisp_csi2_acpi_gpio_parsing_data data = { };
 	LIST_HEAD(resource_list);
@@ -469,9 +436,12 @@  static int atomisp_csi2_add_gpio_mappings(struct atomisp_csi2_sensor *sensor,
 		}
 	}
 
+	data.map = kzalloc(sizeof(*data.map), GFP_KERNEL);
+	if (!data.map)
+		return -ENOMEM;
+
 	/* Now parse the ACPI resources and build the lookup table */
 	data.adev = adev;
-	data.map = &sensor->gpio_map;
 	ret = acpi_dev_get_resources(adev, &resource_list,
 				     atomisp_csi2_handle_acpi_gpio_res, &data);
 	if (ret < 0)
@@ -491,220 +461,59 @@  static int atomisp_csi2_add_gpio_mappings(struct atomisp_csi2_sensor *sensor,
 	return ret;
 }
 
-static const struct atomisp_csi2_property_names prop_names = {
-	.clock_frequency = "clock-frequency",
-	.rotation = "rotation",
-	.bus_type = "bus-type",
-	.data_lanes = "data-lanes",
-	.remote_endpoint = "remote-endpoint",
-	.link_frequencies = "link-frequencies",
-};
-
-static void atomisp_csi2_create_fwnode_properties(struct atomisp_csi2_sensor *sensor,
-						  struct atomisp_csi2_bridge *bridge,
-						  const struct atomisp_csi2_sensor_config *cfg)
+static int atomisp_csi2_parse_sensor_fwnode(struct acpi_device *adev,
+					    struct ipu_sensor *sensor)
 {
-	sensor->prop_names = prop_names;
+	static const struct acpi_device_id dual_lane_sensors[] = {
+		{ "INT33BE" },	/* OV5693 */
+		{}
+	};
+	int ret, clock_num, lanes;
 
-	sensor->local_ref[0] = SOFTWARE_NODE_REFERENCE(&sensor->swnodes[SWNODE_CSI2_ENDPOINT]);
-	sensor->remote_ref[0] = SOFTWARE_NODE_REFERENCE(&sensor->swnodes[SWNODE_SENSOR_ENDPOINT]);
+	/*
+	 * ACPI takes care of turning the PMC clock on and off, but on BYT
+	 * the clock defaults to 25 MHz instead of the expected 19.2 MHz.
+	 * Get the PMC-clock number from ACPI PR0 method and set it to 19.2 MHz.
+	 * The PMC-clock number is also used to determine the default CSI port.
+	 */
+	clock_num = atomisp_csi2_get_pmc_clk_nr_from_acpi_pr0(adev);
 
-	sensor->dev_properties[0] = PROPERTY_ENTRY_U32(sensor->prop_names.clock_frequency,
-						       PMC_CLK_RATE_19_2MHZ);
-	sensor->dev_properties[1] = PROPERTY_ENTRY_U32(sensor->prop_names.rotation, 0);
+	ret = atomisp_csi2_set_pmc_clk_freq(adev, clock_num);
+	if (ret)
+		return ret;
 
-	sensor->ep_properties[0] = PROPERTY_ENTRY_U32(sensor->prop_names.bus_type,
-						      V4L2_FWNODE_BUS_TYPE_CSI2_DPHY);
-	sensor->ep_properties[1] = PROPERTY_ENTRY_U32_ARRAY_LEN(sensor->prop_names.data_lanes,
-								bridge->data_lanes,
-								sensor->lanes);
-	sensor->ep_properties[2] = PROPERTY_ENTRY_REF_ARRAY(sensor->prop_names.remote_endpoint,
-							    sensor->local_ref);
-	if (cfg->nr_link_freqs > 0)
-		sensor->ep_properties[3] =
-			PROPERTY_ENTRY_U64_ARRAY_LEN(sensor->prop_names.link_frequencies,
-						     cfg->link_freqs, cfg->nr_link_freqs);
-
-	sensor->csi2_properties[0] = PROPERTY_ENTRY_U32_ARRAY_LEN(sensor->prop_names.data_lanes,
-								  bridge->data_lanes,
-								  sensor->lanes);
-	sensor->csi2_properties[1] = PROPERTY_ENTRY_REF_ARRAY(sensor->prop_names.remote_endpoint,
-							      sensor->remote_ref);
-}
-
-static void atomisp_csi2_init_swnode_names(struct atomisp_csi2_sensor *sensor)
-{
-	snprintf(sensor->node_names.remote_port,
-		 sizeof(sensor->node_names.remote_port),
-		 SWNODE_GRAPH_PORT_NAME_FMT, sensor->port);
-	snprintf(sensor->node_names.port,
-		 sizeof(sensor->node_names.port),
-		 SWNODE_GRAPH_PORT_NAME_FMT, 0); /* Always port 0 */
-	snprintf(sensor->node_names.endpoint,
-		 sizeof(sensor->node_names.endpoint),
-		 SWNODE_GRAPH_ENDPOINT_NAME_FMT, 0); /* And endpoint 0 */
-}
-
-static void atomisp_csi2_init_swnode_group(struct atomisp_csi2_sensor *sensor)
-{
-	struct software_node *nodes = sensor->swnodes;
-
-	sensor->group[SWNODE_SENSOR] = &nodes[SWNODE_SENSOR];
-	sensor->group[SWNODE_SENSOR_PORT] = &nodes[SWNODE_SENSOR_PORT];
-	sensor->group[SWNODE_SENSOR_ENDPOINT] = &nodes[SWNODE_SENSOR_ENDPOINT];
-	sensor->group[SWNODE_CSI2_PORT] = &nodes[SWNODE_CSI2_PORT];
-	sensor->group[SWNODE_CSI2_ENDPOINT] = &nodes[SWNODE_CSI2_ENDPOINT];
-}
-
-static void atomisp_csi2_create_connection_swnodes(struct atomisp_csi2_bridge *bridge,
-						   struct atomisp_csi2_sensor *sensor)
-{
-	struct software_node *nodes = sensor->swnodes;
-
-	atomisp_csi2_init_swnode_names(sensor);
-
-	nodes[SWNODE_SENSOR] = NODE_SENSOR(sensor->name,
-					   sensor->dev_properties);
-	nodes[SWNODE_SENSOR_PORT] = NODE_PORT(sensor->node_names.port,
-					      &nodes[SWNODE_SENSOR]);
-	nodes[SWNODE_SENSOR_ENDPOINT] = NODE_ENDPOINT(sensor->node_names.endpoint,
-						      &nodes[SWNODE_SENSOR_PORT],
-						      sensor->ep_properties);
-	nodes[SWNODE_CSI2_PORT] = NODE_PORT(sensor->node_names.remote_port,
-					    &bridge->csi2_node);
-	nodes[SWNODE_CSI2_ENDPOINT] = NODE_ENDPOINT(sensor->node_names.endpoint,
-						    &nodes[SWNODE_CSI2_PORT],
-						    sensor->csi2_properties);
-
-	atomisp_csi2_init_swnode_group(sensor);
-}
-
-static void atomisp_csi2_unregister_sensors(struct atomisp_csi2_bridge *bridge)
-{
-	struct atomisp_csi2_sensor *sensor;
-	unsigned int i;
-
-	for (i = 0; i < bridge->n_sensors; i++) {
-		sensor = &bridge->sensors[i];
-		software_node_unregister_node_group(sensor->group);
-		acpi_dev_remove_driver_gpios(sensor->adev);
-		acpi_dev_put(sensor->adev);
+	sensor->link = atomisp_csi2_get_port(adev, clock_num);
+	if (sensor->link >= ATOMISP_CAMERA_NR_PORTS) {
+		dev_err(&adev->dev, "Invalid port: %u\n", sensor->link);
+		return -EINVAL;
 	}
-}
 
-static int atomisp_csi2_connect_sensor(const struct atomisp_csi2_sensor_config *cfg,
-				       struct atomisp_csi2_bridge *bridge,
-				       struct atomisp_device *isp)
-{
-	struct fwnode_handle *fwnode, *primary;
-	struct atomisp_csi2_sensor *sensor;
-	struct acpi_device *adev;
-	int ret, clock_num;
+	if (!acpi_match_device_ids(adev, dual_lane_sensors))
+		lanes = 2;
+	else
+		lanes = 1;
 
-	for_each_acpi_dev_match(adev, cfg->hid, NULL, -1) {
-		if (!adev->status.enabled)
-			continue;
-
-		if (bridge->n_sensors >= ATOMISP_CAMERA_NR_PORTS) {
-			dev_err(isp->dev, "Exceeded available CSI2 ports\n");
-			ret = -EOVERFLOW;
-			goto err_put_adev;
-		}
-
-		sensor = &bridge->sensors[bridge->n_sensors];
-
-		/*
-		 * ACPI takes care of turning the PMC clock on and off, but on BYT
-		 * the clock defaults to 25 MHz instead of the expected 19.2 MHz.
-		 * Get the PMC-clock number from ACPI _PR0 method and set it to 19.2 MHz.
-		 * The PMC-clock number is also used to determine the default CSI port.
-		 */
-		clock_num = atomisp_csi2_get_pmc_clk_nr_from_acpi_pr0(adev);
-
-		ret = atomisp_csi2_set_pmc_clk_freq(adev, clock_num);
-		if (ret)
-			goto err_put_adev;
-
-		sensor->port = atomisp_csi2_get_port(adev, clock_num);
-		if (sensor->port >= ATOMISP_CAMERA_NR_PORTS) {
-			acpi_handle_err(adev->handle, "Invalid port: %d\n", sensor->port);
-			ret = -EINVAL;
-			goto err_put_adev;
-		}
-
-		sensor->lanes = gmin_cfg_get_int(adev, "CsiLanes", cfg->lanes);
-		if (sensor->lanes > CSI2_MAX_LANES) {
-			acpi_handle_err(adev->handle, "Invalid number of lanes: %d\n", sensor->lanes);
-			ret = -EINVAL;
-			goto err_put_adev;
-		}
-
-		ret = atomisp_csi2_add_gpio_mappings(sensor, adev);
-		if (ret)
-			goto err_put_adev;
-
-		snprintf(sensor->name, sizeof(sensor->name), "%s-%u",
-			 cfg->hid, sensor->port);
-
-		atomisp_csi2_create_fwnode_properties(sensor, bridge, cfg);
-		atomisp_csi2_create_connection_swnodes(bridge, sensor);
-
-		ret = software_node_register_node_group(sensor->group);
-		if (ret)
-			goto err_remove_mappings;
-
-		fwnode = software_node_fwnode(&sensor->swnodes[SWNODE_SENSOR]);
-		if (!fwnode) {
-			ret = -ENODEV;
-			goto err_free_swnodes;
-		}
-
-		sensor->adev = acpi_dev_get(adev);
-
-		primary = acpi_fwnode_handle(adev);
-		primary->secondary = fwnode;
-
-		bridge->n_sensors++;
+	sensor->lanes = gmin_cfg_get_int(adev, "CsiLanes", lanes);
+	if (sensor->lanes > IPU_MAX_LANES) {
+		dev_err(&adev->dev, "Invalid lane-count: %d\n", sensor->lanes);
+		return -EINVAL;
 	}
 
+	ret = atomisp_csi2_add_gpio_mappings(adev);
+	if (ret)
+		return ret;
+
+	sensor->mclkspeed = PMC_CLK_RATE_19_2MHZ;
+	sensor->rotation = 0;
+	sensor->orientation = V4L2_FWNODE_ORIENTATION_EXTERNAL;
+
 	return 0;
-
-err_free_swnodes:
-	software_node_unregister_node_group(sensor->group);
-err_remove_mappings:
-	acpi_dev_remove_driver_gpios(adev);
-err_put_adev:
-	acpi_dev_put(adev);
-	return ret;
-}
-
-static int atomisp_csi2_connect_sensors(struct atomisp_csi2_bridge *bridge,
-					struct atomisp_device *isp)
-{
-	unsigned int i;
-	int ret;
-
-	for (i = 0; i < ARRAY_SIZE(supported_sensors); i++) {
-		const struct atomisp_csi2_sensor_config *cfg = &supported_sensors[i];
-
-		ret = atomisp_csi2_connect_sensor(cfg, bridge, isp);
-		if (ret)
-			goto err_unregister_sensors;
-	}
-
-	return 0;
-
-err_unregister_sensors:
-	atomisp_csi2_unregister_sensors(bridge);
-	return ret;
 }
 
 int atomisp_csi2_bridge_init(struct atomisp_device *isp)
 {
-	struct atomisp_csi2_bridge *bridge;
 	struct device *dev = isp->dev;
 	struct fwnode_handle *fwnode;
-	int i, ret;
 
 	/*
 	 * This function is intended to run only once and then leave
@@ -716,52 +525,7 @@  int atomisp_csi2_bridge_init(struct atomisp_device *isp)
 	if (fwnode && fwnode->secondary)
 		return 0;
 
-	bridge = kzalloc(sizeof(*bridge), GFP_KERNEL);
-	if (!bridge)
-		return -ENOMEM;
-
-	strscpy(bridge->csi2_node_name, "atomisp-csi2", sizeof(bridge->csi2_node_name));
-	bridge->csi2_node.name = bridge->csi2_node_name;
-
-	ret = software_node_register(&bridge->csi2_node);
-	if (ret < 0) {
-		dev_err(dev, "Failed to register the CSI2 HID node\n");
-		goto err_free_bridge;
-	}
-
-	/*
-	 * Map the lane arrangement, which is fixed for the ISP2 (meaning we
-	 * only need one, rather than one per sensor). We include it as a
-	 * member of the bridge struct rather than a global variable so
-	 * that it survives if the module is unloaded along with the rest of
-	 * the struct.
-	 */
-	for (i = 0; i < CSI2_MAX_LANES; i++)
-		bridge->data_lanes[i] = i + 1;
-
-	ret = atomisp_csi2_connect_sensors(bridge, isp);
-	if (ret || bridge->n_sensors == 0)
-		goto err_unregister_csi2;
-
-	fwnode = software_node_fwnode(&bridge->csi2_node);
-	if (!fwnode) {
-		dev_err(dev, "Error getting fwnode from csi2 software_node\n");
-		ret = -ENODEV;
-		goto err_unregister_sensors;
-	}
-
-	set_secondary_fwnode(dev, fwnode);
-
-	return 0;
-
-err_unregister_sensors:
-	atomisp_csi2_unregister_sensors(bridge);
-err_unregister_csi2:
-	software_node_unregister(&bridge->csi2_node);
-err_free_bridge:
-	kfree(bridge);
-
-	return ret;
+	return ipu_bridge_init(dev, atomisp_csi2_parse_sensor_fwnode);
 }
 
 /******* V4L2 sub-device asynchronous registration callbacks***********/
diff --git a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
index c43b916a006e..0d80f0893a2e 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
@@ -1615,3 +1615,4 @@  MODULE_AUTHOR("Wen Wang <wen.w.wang@intel.com>");
 MODULE_AUTHOR("Xiaolin Zhang <xiaolin.zhang@intel.com>");
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Intel ATOM Platform ISP Driver");
+MODULE_IMPORT_NS(INTEL_IPU_BRIDGE);