@@ -140,6 +140,7 @@
#define IMX219_DEFAULT_LINK_FREQ_4LANE 363000000
/* IMX219 native and active pixel array size. */
+#define IMX219_NATIVE_FORMAT MEDIA_BUS_FMT_SRGGB10_1X10
#define IMX219_NATIVE_WIDTH 3296U
#define IMX219_NATIVE_HEIGHT 2480U
#define IMX219_PIXEL_ARRAY_LEFT 8U
@@ -312,9 +313,15 @@ static const struct imx219_mode supported_modes[] = {
},
};
+enum imx219_pad_ids {
+ IMX219_PAD_SOURCE,
+ IMX219_PAD_IMAGE,
+ IMX219_NUM_PADS,
+};
+
struct imx219 {
struct v4l2_subdev sd;
- struct media_pad pad;
+ struct media_pad pads[IMX219_NUM_PADS];
struct regmap *regmap;
struct clk *xclk; /* system clock to IMX219 */
@@ -374,7 +381,7 @@ static int imx219_set_ctrl(struct v4l2_ctrl *ctrl)
int ret = 0;
state = v4l2_subdev_get_locked_active_state(&imx219->sd);
- format = v4l2_subdev_state_get_format(state, 0);
+ format = v4l2_subdev_state_get_format(state, IMX219_PAD_SOURCE);
if (ctrl->id == V4L2_CID_VBLANK) {
int exposure_max, exposure_def;
@@ -593,8 +600,8 @@ static int imx219_set_framefmt(struct imx219 *imx219,
u64 bin_h, bin_v;
int ret = 0;
- format = v4l2_subdev_state_get_format(state, 0);
- crop = v4l2_subdev_state_get_crop(state, 0);
+ format = v4l2_subdev_state_get_format(state, IMX219_PAD_SOURCE);
+ crop = v4l2_subdev_state_get_crop(state, IMX219_PAD_IMAGE);
switch (format->code) {
case MEDIA_BUS_FMT_SRGGB8_1X8:
@@ -764,10 +771,25 @@ static int imx219_enum_mbus_code(struct v4l2_subdev *sd,
{
struct imx219 *imx219 = to_imx219(sd);
- if (code->index >= (ARRAY_SIZE(imx219_mbus_formats) / 4))
- return -EINVAL;
+ if (code->pad == IMX219_PAD_IMAGE) {
+ /* The internal image pad is hardwired to the native format. */
+ if (code->index)
+ return -EINVAL;
- code->code = imx219_get_format_code(imx219, imx219_mbus_formats[code->index * 4]);
+ code->code = IMX219_NATIVE_FORMAT;
+ } else {
+ /*
+ * On the source pad, the sensor supports multiple raw formats
+ * with different bit depths.
+ */
+ u32 format;
+
+ if (code->index >= (ARRAY_SIZE(imx219_mbus_formats) / 4))
+ return -EINVAL;
+
+ format = imx219_mbus_formats[code->index * 4];
+ code->code = imx219_get_format_code(imx219, format);
+ }
return 0;
}
@@ -777,19 +799,25 @@ static int imx219_enum_frame_size(struct v4l2_subdev *sd,
struct v4l2_subdev_frame_size_enum *fse)
{
struct imx219 *imx219 = to_imx219(sd);
- u32 code;
- if (fse->index >= ARRAY_SIZE(supported_modes))
- return -EINVAL;
+ if (fse->pad == IMX219_PAD_IMAGE) {
+ if (fse->code != IMX219_NATIVE_FORMAT || fse->index > 0)
+ return -EINVAL;
- code = imx219_get_format_code(imx219, fse->code);
- if (fse->code != code)
- return -EINVAL;
+ fse->min_width = IMX219_NATIVE_WIDTH;
+ fse->max_width = IMX219_NATIVE_WIDTH;
+ fse->min_height = IMX219_NATIVE_HEIGHT;
+ fse->max_height = IMX219_NATIVE_HEIGHT;
+ } else {
+ if (fse->code != imx219_get_format_code(imx219, fse->code) ||
+ fse->index >= ARRAY_SIZE(supported_modes))
+ return -EINVAL;
- fse->min_width = supported_modes[fse->index].width;
- fse->max_width = fse->min_width;
- fse->min_height = supported_modes[fse->index].height;
- fse->max_height = fse->min_height;
+ fse->min_width = supported_modes[fse->index].width;
+ fse->max_width = fse->min_width;
+ fse->min_height = supported_modes[fse->index].height;
+ fse->max_height = fse->min_height;
+ }
return 0;
}
@@ -801,9 +829,17 @@ static int imx219_set_pad_format(struct v4l2_subdev *sd,
struct imx219 *imx219 = to_imx219(sd);
const struct imx219_mode *mode;
struct v4l2_mbus_framefmt *format;
+ struct v4l2_rect *compose;
struct v4l2_rect *crop;
unsigned int bin_h, bin_v;
+ /*
+ * The driver is mode-based, the format can be set on the source pad
+ * only.
+ */
+ if (fmt->pad != IMX219_PAD_SOURCE)
+ return v4l2_subdev_get_fmt(sd, state, fmt);
+
/*
* Adjust the requested format to match the closest mode. The Bayer
* order varies with flips.
@@ -822,22 +858,51 @@ static int imx219_set_pad_format(struct v4l2_subdev *sd,
fmt->format.quantization = V4L2_QUANTIZATION_FULL_RANGE;
fmt->format.xfer_func = V4L2_XFER_FUNC_NONE;
- format = v4l2_subdev_state_get_format(state, 0);
+ /* Propagate the format through the sensor. */
+
+ /* The image pad models the pixel array, and thus has a fixed size. */
+ format = v4l2_subdev_state_get_format(state, IMX219_PAD_IMAGE);
*format = fmt->format;
+ format->code = IMX219_NATIVE_FORMAT;
+ format->width = IMX219_NATIVE_WIDTH;
+ format->height = IMX219_NATIVE_HEIGHT;
/*
* Use binning to maximize the crop rectangle size, and centre it in the
* sensor.
*/
- bin_h = min(IMX219_PIXEL_ARRAY_WIDTH / format->width, 2U);
- bin_v = min(IMX219_PIXEL_ARRAY_HEIGHT / format->height, 2U);
+ bin_h = min(IMX219_PIXEL_ARRAY_WIDTH / fmt->format.width, 2U);
+ bin_v = min(IMX219_PIXEL_ARRAY_HEIGHT / fmt->format.height, 2U);
- crop = v4l2_subdev_state_get_crop(state, 0);
- crop->width = format->width * bin_h;
- crop->height = format->height * bin_v;
+ crop = v4l2_subdev_state_get_crop(state, IMX219_PAD_IMAGE);
+ crop->width = fmt->format.width * bin_h;
+ crop->height = fmt->format.height * bin_v;
crop->left = (IMX219_NATIVE_WIDTH - crop->width) / 2;
crop->top = (IMX219_NATIVE_HEIGHT - crop->height) / 2;
+ /*
+ * The compose rectangle models binning, its size is the sensor output
+ * size.
+ */
+ compose = v4l2_subdev_state_get_compose(state, IMX219_PAD_IMAGE);
+ compose->left = 0;
+ compose->top = 0;
+ compose->width = fmt->format.width;
+ compose->height = fmt->format.height;
+
+ /*
+ * No mode use digital crop, the source pad crop rectangle size and
+ * format are thus identical to the image pad compose rectangle.
+ */
+ crop = v4l2_subdev_state_get_crop(state, IMX219_PAD_SOURCE);
+ crop->left = 0;
+ crop->top = 0;
+ crop->width = fmt->format.width;
+ crop->height = fmt->format.height;
+
+ format = v4l2_subdev_state_get_format(state, IMX219_PAD_SOURCE);
+ *format = fmt->format;
+
if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
int exposure_max;
int exposure_def;
@@ -874,13 +939,13 @@ static int imx219_get_selection(struct v4l2_subdev *sd,
struct v4l2_subdev_state *state,
struct v4l2_subdev_selection *sel)
{
- switch (sel->target) {
- case V4L2_SEL_TGT_CROP: {
- sel->r = *v4l2_subdev_state_get_crop(state, 0);
- return 0;
- }
+ struct v4l2_rect *compose;
+ switch (sel->target) {
case V4L2_SEL_TGT_NATIVE_SIZE:
+ if (sel->pad != IMX219_PAD_IMAGE)
+ return -EINVAL;
+
sel->r.top = 0;
sel->r.left = 0;
sel->r.width = IMX219_NATIVE_WIDTH;
@@ -890,11 +955,35 @@ static int imx219_get_selection(struct v4l2_subdev *sd,
case V4L2_SEL_TGT_CROP_DEFAULT:
case V4L2_SEL_TGT_CROP_BOUNDS:
- sel->r.top = IMX219_PIXEL_ARRAY_TOP;
- sel->r.left = IMX219_PIXEL_ARRAY_LEFT;
- sel->r.width = IMX219_PIXEL_ARRAY_WIDTH;
- sel->r.height = IMX219_PIXEL_ARRAY_HEIGHT;
+ switch (sel->pad) {
+ case IMX219_PAD_IMAGE:
+ sel->r.top = IMX219_PIXEL_ARRAY_TOP;
+ sel->r.left = IMX219_PIXEL_ARRAY_LEFT;
+ sel->r.width = IMX219_PIXEL_ARRAY_WIDTH;
+ sel->r.height = IMX219_PIXEL_ARRAY_HEIGHT;
+ return 0;
+ case IMX219_PAD_SOURCE:
+ compose = v4l2_subdev_state_get_compose(state,
+ IMX219_PAD_IMAGE);
+ sel->r.top = 0;
+ sel->r.left = 0;
+ sel->r.width = compose->width;
+ sel->r.height = compose->height;
+ return 0;
+ }
+
+ break;
+
+ case V4L2_SEL_TGT_CROP:
+ sel->r = *v4l2_subdev_state_get_crop(state, sel->pad);
+ return 0;
+
+ case V4L2_SEL_TGT_COMPOSE:
+ if (sel->pad != IMX219_PAD_IMAGE)
+ return -EINVAL;
+
+ sel->r = *v4l2_subdev_state_get_compose(state, sel->pad);
return 0;
}
@@ -906,7 +995,7 @@ static int imx219_init_state(struct v4l2_subdev *sd,
{
struct v4l2_subdev_format fmt = {
.which = V4L2_SUBDEV_FORMAT_TRY,
- .pad = 0,
+ .pad = IMX219_PAD_SOURCE,
.format = {
.code = MEDIA_BUS_FMT_SRGGB10_1X10,
.width = supported_modes[0].width,
@@ -1174,10 +1263,18 @@ static int imx219_probe(struct i2c_client *client)
V4L2_SUBDEV_FL_HAS_EVENTS;
imx219->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
- /* Initialize source pad */
- imx219->pad.flags = MEDIA_PAD_FL_SOURCE;
+ /*
+ * Initialize the pads. To preserve backward compatibility with
+ * userspace that used the sensor before the introduction of the
+ * internal image pad, the external source pad is numbered 0 and the
+ * internal image pad numbered 1.
+ */
+ imx219->pads[IMX219_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
+ imx219->pads[IMX219_PAD_IMAGE].flags = MEDIA_PAD_FL_SINK
+ | MEDIA_PAD_FL_INTERNAL;
- ret = media_entity_pads_init(&imx219->sd.entity, 1, &imx219->pad);
+ ret = media_entity_pads_init(&imx219->sd.entity,
+ ARRAY_SIZE(imx219->pads), imx219->pads);
if (ret) {
dev_err(dev, "failed to init entity pads: %d\n", ret);
goto error_handler_free;
Use the newly added internal pad API to expose the internal configuration of the sensor to userspace in a standard manner. This also paves the way for adding support for embedded data with an additional internal pad. To maintain compatibility with existing userspace that may operate on pad 0 unconditionally, keep the source pad numbered 0 and number the internal image pad 1. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- drivers/media/i2c/imx219.c | 169 +++++++++++++++++++++++++++++-------- 1 file changed, 133 insertions(+), 36 deletions(-)