| Message ID | 20240324220854.15010-11-laurent.pinchart@ideasonboard.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | media: Add driver for the Raspberry Pi <5 CSI-2 receiver | expand |
diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi b/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi index d233a191c139..86188eabeb24 100644 --- a/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi @@ -20,11 +20,6 @@ aliases { }; &firmware { - firmware_clocks: clocks { - compatible = "raspberrypi,firmware-clocks"; - #clock-cells = <1>; - }; - expgpio: gpio { compatible = "raspberrypi,firmware-gpio"; gpio-controller; diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi b/arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi index f0acc9390f31..7e752a66bf8d 100644 --- a/arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi @@ -9,6 +9,11 @@ firmware: firmware { mboxes = <&mailbox>; dma-ranges; + + firmware_clocks: clocks { + compatible = "raspberrypi,firmware-clocks"; + #clock-cells = <1>; + }; }; power: power {
The Raspberry Pi firmware handles clocks on all BCM2835-derived SoCs, not just on the BCM2711. Move the corresponding DT node from bcm2711-rpi.dtsi to bcm2835-rpi.dtsi. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi | 5 ----- arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi | 5 +++++ 2 files changed, 5 insertions(+), 5 deletions(-)