| Message ID | 20240503155127.105235-6-jacopo.mondi@ideasonboard.com |
|---|---|
| State | New |
| Headers | show |
| Series | media: renesas: rcar-csi2: Use the subdev active state | expand |
Hi Jacopo, Thank you for the patch. On Fri, May 03, 2024 at 05:51:20PM +0200, Jacopo Mondi wrote: > Initialize the subdevice format to the default 1280x720 YUV 4:2:2. > > The subdevice format is propagated from the frontend (HDMI or AFE) to > the CSI-2 tx, but it was not initialized during the CSI-2 tx > registration. > > Use YUYV8 1280x720 as default format as it's supported by both TXes in > all supported configurations (1, 2 or 4 CSI-2 lanes). > > Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> > --- > drivers/media/i2c/adv748x/adv748x-csi2.c | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c > index 5b265b722394..9da7f6742a2b 100644 > --- a/drivers/media/i2c/adv748x/adv748x-csi2.c > +++ b/drivers/media/i2c/adv748x/adv748x-csi2.c > @@ -14,6 +14,13 @@ > > #include "adv748x.h" > > +static const struct v4l2_mbus_framefmt adv748x_csi2_default_fmt = { > + .width = 1280, > + .height = 720, > + .code = MEDIA_BUS_FMT_YUYV8_1X16, > + .field = V4L2_FIELD_NONE, > +}; > + > int adv748x_csi2_set_virtual_channel(struct adv748x_csi2 *tx, unsigned int vc) > { > return tx_write(tx, ADV748X_CSI_VC_REF, vc << ADV748X_CSI_VC_REF_SHIFT); > @@ -311,6 +318,8 @@ int adv748x_csi2_init(struct adv748x_state *state, struct adv748x_csi2 *tx) > if (ret) > return ret; > > + tx->format = adv748x_csi2_default_fmt; > + This looks OK, so Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> But patch 08/11 removes the tx->format field, so I think you could as well drop this patch. > ret = v4l2_async_subdev_endpoint_add(&tx->sd, > of_fwnode_handle(state->endpoints[tx->port])); > if (ret)
diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c index 5b265b722394..9da7f6742a2b 100644 --- a/drivers/media/i2c/adv748x/adv748x-csi2.c +++ b/drivers/media/i2c/adv748x/adv748x-csi2.c @@ -14,6 +14,13 @@ #include "adv748x.h" +static const struct v4l2_mbus_framefmt adv748x_csi2_default_fmt = { + .width = 1280, + .height = 720, + .code = MEDIA_BUS_FMT_YUYV8_1X16, + .field = V4L2_FIELD_NONE, +}; + int adv748x_csi2_set_virtual_channel(struct adv748x_csi2 *tx, unsigned int vc) { return tx_write(tx, ADV748X_CSI_VC_REF, vc << ADV748X_CSI_VC_REF_SHIFT); @@ -311,6 +318,8 @@ int adv748x_csi2_init(struct adv748x_state *state, struct adv748x_csi2 *tx) if (ret) return ret; + tx->format = adv748x_csi2_default_fmt; + ret = v4l2_async_subdev_endpoint_add(&tx->sd, of_fwnode_handle(state->endpoints[tx->port])); if (ret)
Initialize the subdevice format to the default 1280x720 YUV 4:2:2. The subdevice format is propagated from the frontend (HDMI or AFE) to the CSI-2 tx, but it was not initialized during the CSI-2 tx registration. Use YUYV8 1280x720 as default format as it's supported by both TXes in all supported configurations (1, 2 or 4 CSI-2 lanes). Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> --- drivers/media/i2c/adv748x/adv748x-csi2.c | 9 +++++++++ 1 file changed, 9 insertions(+)