@@ -183,17 +183,19 @@ struct rcar_csi2;
#define V4H_CORE_DIG_IOCTRL_RW_AFE_CB_CTRL_2_REG(n) (0x23840 + ((n) * 2)) /* n = 0 - 11 */
#define V4H_CORE_DIG_RW_COMMON_REG(n) (0x23880 + ((n) * 2)) /* n = 0 - 15 */
#define V4H_CORE_DIG_ANACTRL_RW_COMMON_ANACTRL_REG(n) (0x239e0 + ((n) * 2)) /* n = 0 - 3 */
-#define V4H_CORE_DIG_CLANE_1_RW_CFG_0_REG 0x2a400
#define V4H_CORE_DIG_CLANE_1_RW_HS_TX_6_REG 0x2a60c
/* V4H C-PHY */
#define V4H_CORE_DIG_RW_TRIO0_REG(n) (0x22100 + ((n) * 2)) /* n = 0 - 3 */
#define V4H_CORE_DIG_RW_TRIO1_REG(n) (0x22500 + ((n) * 2)) /* n = 0 - 3 */
#define V4H_CORE_DIG_RW_TRIO2_REG(n) (0x22900 + ((n) * 2)) /* n = 0 - 3 */
+#define V4H_CORE_DIG_CLANE_0_RW_CFG_0_REG 0x2a000
#define V4H_CORE_DIG_CLANE_0_RW_LP_0_REG 0x2a080
#define V4H_CORE_DIG_CLANE_0_RW_HS_RX_REG(n) (0x2a100 + ((n) * 2)) /* n = 0 - 6 */
+#define V4H_CORE_DIG_CLANE_1_RW_CFG_0_REG 0x2a400
#define V4H_CORE_DIG_CLANE_1_RW_LP_0_REG 0x2a480
#define V4H_CORE_DIG_CLANE_1_RW_HS_RX_REG(n) (0x2a500 + ((n) * 2)) /* n = 0 - 6 */
+#define V4H_CORE_DIG_CLANE_2_RW_CFG_0_REG 0x2a800
#define V4H_CORE_DIG_CLANE_2_RW_LP_0_REG 0x2a880
#define V4H_CORE_DIG_CLANE_2_RW_HS_RX_REG(n) (0x2a900 + ((n) * 2)) /* n = 0 - 6 */
@@ -672,6 +674,21 @@ static const struct rcar_csi2_format *rcsi2_code_to_fmt(unsigned int code)
return NULL;
}
+struct rcsi2_cphy_line_order {
+ enum v4l2_mbus_csi2_cphy_line_orders_type order;
+ u16 cfg;
+ u16 ctrl29;
+};
+
+static const struct rcsi2_cphy_line_order rcsi2_cphy_line_orders[] = {
+ { .order = V4L2_MBUS_CSI2_CPHY_LINE_ORDER_ABC, .cfg = 0x0, .ctrl29 = 0x0 },
+ { .order = V4L2_MBUS_CSI2_CPHY_LINE_ORDER_ACB, .cfg = 0xa, .ctrl29 = 0x1 },
+ { .order = V4L2_MBUS_CSI2_CPHY_LINE_ORDER_BAC, .cfg = 0xc, .ctrl29 = 0x1 },
+ { .order = V4L2_MBUS_CSI2_CPHY_LINE_ORDER_BCA, .cfg = 0x5, .ctrl29 = 0x0 },
+ { .order = V4L2_MBUS_CSI2_CPHY_LINE_ORDER_CAB, .cfg = 0x3, .ctrl29 = 0x0 },
+ { .order = V4L2_MBUS_CSI2_CPHY_LINE_ORDER_CBA, .cfg = 0x9, .ctrl29 = 0x1 }
+};
+
enum rcar_csi2_pads {
RCAR_CSI2_SINK,
RCAR_CSI2_SOURCE_VC0,
@@ -722,6 +739,7 @@ struct rcar_csi2 {
bool cphy;
unsigned short lanes;
unsigned char lane_swap[4];
+ enum v4l2_mbus_csi2_cphy_line_orders_type line_orders[3];
};
static inline struct rcar_csi2 *sd_to_csi2(struct v4l2_subdev *sd)
@@ -754,11 +772,24 @@ static void rcsi2_write(struct rcar_csi2 *priv, unsigned int reg, u32 data)
iowrite32(data, priv->base + reg);
}
+static u16 rcsi2_read16(struct rcar_csi2 *priv, unsigned int reg)
+{
+ return ioread16(priv->base + reg);
+}
+
static void rcsi2_write16(struct rcar_csi2 *priv, unsigned int reg, u16 data)
{
iowrite16(data, priv->base + reg);
}
+static void rcsi2_modify16(struct rcar_csi2 *priv, unsigned int reg, u16 data, u16 mask)
+{
+ u16 val;
+
+ val = rcsi2_read16(priv, reg) & ~mask;
+ rcsi2_write16(priv, reg, val | data);
+}
+
static int rcsi2_phtw_write(struct rcar_csi2 *priv, u8 data, u8 code)
{
unsigned int timeout;
@@ -1112,6 +1143,26 @@ static int rcsi2_start_receiver_gen3(struct rcar_csi2 *priv,
return 0;
}
+static void rsci2_set_line_order(struct rcar_csi2 *priv,
+ enum v4l2_mbus_csi2_cphy_line_orders_type order,
+ unsigned int cfgreg, unsigned int ctrlreg)
+{
+ const struct rcsi2_cphy_line_order *info = NULL;
+
+ for (unsigned int i = 0; i < ARRAY_SIZE(rcsi2_cphy_line_orders); i++) {
+ if (rcsi2_cphy_line_orders[i].order == order) {
+ info = &rcsi2_cphy_line_orders[i];
+ break;
+ }
+ }
+
+ if (!info)
+ return;
+
+ rcsi2_modify16(priv, cfgreg, info->cfg, 0x000f);
+ rcsi2_modify16(priv, ctrlreg, info->ctrl29, 0x0100);
+}
+
static int rcsi2_wait_phy_start_v4h(struct rcar_csi2 *priv, u32 match)
{
unsigned int timeout;
@@ -1189,12 +1240,18 @@ static int rcsi2_c_phy_setting_v4h(struct rcar_csi2 *priv, int msps)
rcsi2_write16(priv, V4H_CORE_DIG_RW_TRIO1_REG(1), conf->trio1);
rcsi2_write16(priv, V4H_CORE_DIG_RW_TRIO2_REG(1), conf->trio1);
- /*
- * Configure pin-swap.
- * TODO: This registers is not documented yet, the values should depend
- * on the 'clock-lanes' and 'data-lanes' devicetree properties.
- */
- rcsi2_write16(priv, V4H_CORE_DIG_CLANE_1_RW_CFG_0_REG, 0xf5);
+ /* Configure data line order. */
+ rsci2_set_line_order(priv, priv->line_orders[0],
+ V4H_CORE_DIG_CLANE_0_RW_CFG_0_REG,
+ V4H_CORE_DIG_IOCTRL_RW_AFE_LANE0_CTRL_2_REG(9));
+ rsci2_set_line_order(priv, priv->line_orders[1],
+ V4H_CORE_DIG_CLANE_1_RW_CFG_0_REG,
+ V4H_CORE_DIG_IOCTRL_RW_AFE_LANE1_CTRL_2_REG(9));
+ rsci2_set_line_order(priv, priv->line_orders[2],
+ V4H_CORE_DIG_CLANE_2_RW_CFG_0_REG,
+ V4H_CORE_DIG_IOCTRL_RW_AFE_LANE2_CTRL_2_REG(9));
+
+ /* TODO: This registers is not documented. */
rcsi2_write16(priv, V4H_CORE_DIG_CLANE_1_RW_HS_TX_6_REG, 0x5000);
/* Leave Shutdown mode */
@@ -1732,6 +1789,9 @@ static int rcsi2_parse_v4l2(struct rcar_csi2 *priv,
}
}
+ for (i = 0; i < ARRAY_SIZE(priv->line_orders); i++)
+ priv->line_orders[i] = vep->bus.mipi_csi2.line_orders[i];
+
return 0;
}
Later versions of the V4H datasheet adds documentation for the line order register needed to support all possible configurations. Extend the driver to take the line order for each data line into account when configuring the device. Unfortunately not all registers initially thought to be involved in line order configuration where directly related. One magic value is still in the driver and left as-is, but it is not related to line order as that procedure have now been documented. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> --- drivers/media/platform/renesas/rcar-csi2.c | 74 ++++++++++++++++++++-- 1 file changed, 67 insertions(+), 7 deletions(-)