diff --git a/Documentation/devicetree/bindings/media/i2c/ti,ds90ub953.yaml b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub953.yaml
index 2030366994d1..2e129bf573b7 100644
--- a/Documentation/devicetree/bindings/media/i2c/ti,ds90ub953.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub953.yaml
@@ -38,6 +38,13 @@ properties:
   '#clock-cells':
     const: 0
 
+  reg:
+    maxItems: 1
+    description:
+      The strap I2C address of the serializer. Can be used by the deserializer
+      to communicate over back-channel when the forward-channel is not yet
+      active.
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
@@ -81,51 +88,57 @@ examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
 
-    serializer {
-      compatible = "ti,ds90ub953-q1";
+    link {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      serializer@18 {
+        compatible = "ti,ds90ub953-q1";
+        reg = <0x18>;
 
-      gpio-controller;
-      #gpio-cells = <2>;
+        gpio-controller;
+        #gpio-cells = <2>;
 
-      #clock-cells = <0>;
+        #clock-cells = <0>;
 
-      ports {
-        #address-cells = <1>;
-        #size-cells = <0>;
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
 
-        port@0 {
-          reg = <0>;
-          ub953_in: endpoint {
-            clock-lanes = <0>;
-            data-lanes = <1 2 3 4>;
-            remote-endpoint = <&sensor_out>;
+          port@0 {
+            reg = <0>;
+            ub953_in: endpoint {
+              clock-lanes = <0>;
+              data-lanes = <1 2 3 4>;
+              remote-endpoint = <&sensor_out>;
+            };
           };
-        };
 
-        port@1 {
-          reg = <1>;
-          endpoint {
-            remote-endpoint = <&deser_fpd_in>;
+          port@1 {
+            reg = <1>;
+            endpoint {
+              remote-endpoint = <&deser_fpd_in>;
+            };
           };
         };
-      };
 
-      i2c {
-        #address-cells = <1>;
-        #size-cells = <0>;
+        i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
 
-        sensor@1a {
-          compatible = "sony,imx274";
-          reg = <0x1a>;
+          sensor@1a {
+            compatible = "sony,imx274";
+            reg = <0x1a>;
 
-          reset-gpios = <&serializer 0 GPIO_ACTIVE_LOW>;
+            reset-gpios = <&serializer 0 GPIO_ACTIVE_LOW>;
 
-          clocks = <&serializer>;
-          clock-names = "inck";
+            clocks = <&serializer>;
+            clock-names = "inck";
 
-          port {
-            sensor_out: endpoint {
-              remote-endpoint = <&ub953_in>;
+            port {
+              sensor_out: endpoint {
+                remote-endpoint = <&ub953_in>;
+              };
             };
           };
         };
diff --git a/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml
index 970f0f36449a..d9ffa369a13d 100644
--- a/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml
@@ -73,6 +73,12 @@ properties:
             description: The link number
             maxItems: 1
 
+          '#address-cells':
+            const: 1
+
+          '#size-cells':
+            const: 0
+
           i2c-alias:
             $ref: /schemas/types.yaml#/definitions/uint32
             description:
@@ -112,7 +118,8 @@ properties:
             maximum: 14
             description: Manual EQ level
 
-          serializer:
+        patternProperties:
+          '^serializer(@[0-9a-f]+)*$':
             type: object
             description: FPD-Link Serializer node
 
@@ -120,7 +127,6 @@ properties:
           - reg
           - i2c-alias
           - ti,rx-mode
-          - serializer
 
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
@@ -314,13 +320,17 @@ examples:
           /* Link 0 has DS90UB953 serializer and IMX274 sensor */
 
           link@0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
             reg = <0>;
             i2c-alias = <0x44>;
 
             ti,rx-mode = <3>;
 
-            serializer1: serializer {
+            serializer1: serializer@30 {
               compatible = "ti,ds90ub953-q1";
+              reg = <0x30>;
 
               gpio-controller;
               #gpio-cells = <2>;
