@@ -400,10 +400,9 @@ static u32 imx219_get_format_bpp(const struct v4l2_mbus_framefmt *format)
}
}
-static void imx219_get_binning(struct imx219 *imx219, u8 *bin_h, u8 *bin_v)
+static void imx219_get_binning(struct v4l2_subdev_state *state, u8 *bin_h,
+ u8 *bin_v)
{
- struct v4l2_subdev_state *state =
- v4l2_subdev_get_locked_active_state(&imx219->sd);
const struct v4l2_mbus_framefmt *format =
v4l2_subdev_state_get_format(state, 0);
const struct v4l2_rect *crop = v4l2_subdev_state_get_crop(state, 0);
@@ -430,11 +429,11 @@ static void imx219_get_binning(struct imx219 *imx219, u8 *bin_h, u8 *bin_v)
*bin_v = IMX219_BINNING_X2;
}
-static inline u32 imx219_get_rate_factor(struct imx219 *imx219)
+static inline u32 imx219_get_rate_factor(struct v4l2_subdev_state *state)
{
u8 bin_h, bin_v;
- imx219_get_binning(imx219, &bin_h, &bin_v);
+ imx219_get_binning(state, &bin_h, &bin_v);
return (bin_h & bin_v) == IMX219_BINNING_X2_ANALOG ? 2 : 1;
}
@@ -455,7 +454,7 @@ static int imx219_set_ctrl(struct v4l2_ctrl *ctrl)
state = v4l2_subdev_get_locked_active_state(&imx219->sd);
format = v4l2_subdev_state_get_format(state, 0);
- rate_factor = imx219_get_rate_factor(imx219);
+ rate_factor = imx219_get_rate_factor(state);
if (ctrl->id == V4L2_CID_VBLANK) {
int exposure_max, exposure_def;
@@ -689,7 +688,7 @@ static int imx219_set_framefmt(struct imx219 *imx219,
cci_write(imx219->regmap, IMX219_REG_Y_ADD_END_A,
crop->top - IMX219_PIXEL_ARRAY_TOP + crop->height - 1, &ret);
- imx219_get_binning(imx219, &bin_h, &bin_v);
+ imx219_get_binning(state, &bin_h, &bin_v);
cci_write(imx219->regmap, IMX219_REG_BINNING_MODE_H, bin_h, &ret);
cci_write(imx219->regmap, IMX219_REG_BINNING_MODE_V, bin_v, &ret);
@@ -937,7 +936,7 @@ static int imx219_set_pad_format(struct v4l2_subdev *sd,
/* Scale the pixel rate based on the mode specific factor */
pixel_rate = imx219_get_pixel_rate(imx219) *
- imx219_get_rate_factor(imx219);
+ imx219_get_rate_factor(state);
__v4l2_ctrl_modify_range(imx219->pixel_rate, pixel_rate,
pixel_rate, 1, pixel_rate);
}
The pixel rate and binning calculations need the format and resolution of the sensor, so pass the v4l2 subdev state directly instead of always operating on the active state. Suggested-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Link: https://lore.kernel.org/linux-media/sejl7xskif6rlpdsg3jhczjwe5gi6rs53ehbyka6omv2zeg7qq@4iis7i2lla5p/ Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com> --- drivers/media/i2c/imx219.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-)