@@ -1098,6 +1098,13 @@ static int mt9m114_pa_s_ctrl(struct v4l2_ctrl *ctrl)
ret = cci_update_bits(sensor->regmap,
MT9M114_CAM_SENSOR_CONTROL_READ_MODE,
mask, ctrl->val ? mask : 0, NULL);
+ if (ret)
+ return ret;
+ if (sensor->streaming) {
+ // Changing the flip config while streaming requires a CONFIG_CHANGE
+ ret = mt9m114_set_state(sensor,
+ MT9M114_SYS_STATE_ENTER_CONFIG_CHANGE);
+ }
break;
case V4L2_CID_VFLIP:
@@ -1105,6 +1112,13 @@ static int mt9m114_pa_s_ctrl(struct v4l2_ctrl *ctrl)
ret = cci_update_bits(sensor->regmap,
MT9M114_CAM_SENSOR_CONTROL_READ_MODE,
mask, ctrl->val ? mask : 0, NULL);
+ if (ret)
+ return ret;
+ if (sensor->streaming) {
+ // Changing the flip config while streaming requires a CONFIG_CHANGE
+ ret = mt9m114_set_state(sensor,
+ MT9M114_SYS_STATE_ENTER_CONFIG_CHANGE);
+ }
break;
default:
@@ -1286,6 +1300,7 @@ static int mt9m114_pa_set_selection(struct v4l2_subdev *sd,
struct mt9m114 *sensor = pa_to_mt9m114(sd);
struct v4l2_mbus_framefmt *format;
struct v4l2_rect *crop;
+ int ret = 0;
if (sel->target != V4L2_SEL_TGT_CROP)
return -EINVAL;
@@ -1316,10 +1331,21 @@ static int mt9m114_pa_set_selection(struct v4l2_subdev *sd,
format->width = crop->width;
format->height = crop->height;
- if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE)
- mt9m114_pa_ctrl_update_blanking(sensor, format);
+ if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
+ return ret;
- return 0;
+ mt9m114_pa_ctrl_update_blanking(sensor, format);
+
+ /* Apply values immediately if streaming */
+ if (sensor->streaming) {
+ ret = mt9m114_configure_pa(sensor, state);
+ if (ret)
+ return ret;
+ // Changing the cropping config requires a CONFIG_CHANGE
+ ret = mt9m114_set_state(sensor, MT9M114_SYS_STATE_ENTER_CONFIG_CHANGE);
+ }
+
+ return ret;
}
static const struct v4l2_subdev_pad_ops mt9m114_pa_pad_ops = {
The current implementation does not apply changes to the crop- configuration of the sensor immediately if the sensor is in streaming state. The user has to stop and restart the stream for the changes to be applied. The same holds for changes to the V4L2 controls HFLIP & VFLIP. This can be undesirable e.g. in a calibration usecase where the user wants to see the impact of his changes in a live video stream. Call mt9m114_configure_pa() in mt9m114_pa_set_selection() if the sensor is in streaming state and issue a CONFIG_CHANGE to apply the changes immediately. Issue a CONFIG_CHANGE when the V4L2 controls HFLIP or VFLIP are set if the sensor is in streaming state to apply the change immediately. Signed-off-by: Mathis Foerst <mathis.foerst@mt.com> --- drivers/media/i2c/mt9m114.c | 32 +++++++++++++++++++++++++++++--- 1 file changed, 29 insertions(+), 3 deletions(-)