diff mbox series

[v3,6/6] arm64: dts: qcom: qcm2290: Add CAMSS node

Message ID 20250418141147.205179-7-loic.poulain@oss.qualcomm.com
State New
Headers show
Series media: qcom: camss: Add qcm2290 support | expand

Commit Message

Loic Poulain April 18, 2025, 2:11 p.m. UTC 
Add node for the QCM2290 camera subsystem.

Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/qcm2290.dtsi | 103 ++++++++++++++++++++++++++
 1 file changed, 103 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
index f0746123e594..e2fefa79b8ac 100644
--- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
@@ -1579,6 +1579,109 @@  adreno_smmu: iommu@59a0000 {
 			#iommu-cells = <2>;
 		};
 
+		camss: camss@5c6e000 {
+			compatible = "qcom,qcm2290-camss";
+
+			reg = <0x0 0x5c6e000 0x0 0x1000>,
+			      <0x0 0x5c75000 0x0 0x1000>,
+			      <0x0 0x5c52000 0x0 0x1000>,
+			      <0x0 0x5c53000 0x0 0x1000>,
+			      <0x0 0x5c66000 0x0 0x400>,
+			      <0x0 0x5c68000 0x0 0x400>,
+			      <0x0 0x5c11000 0x0 0x1000>,
+			      <0x0 0x5c6f000 0x0 0x4000>,
+			      <0x0 0x5c76000 0x0 0x4000>;
+			reg-names = "csid0",
+				    "csid1",
+				    "csiphy0",
+				    "csiphy1",
+				    "csitpg0",
+				    "csitpg1",
+				    "top",
+				    "vfe0",
+				    "vfe1";
+
+			clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+				 <&gcc GCC_CAMSS_AXI_CLK>,
+				 <&gcc GCC_CAMSS_NRT_AXI_CLK>,
+				 <&gcc GCC_CAMSS_RT_AXI_CLK>,
+				 <&gcc GCC_CAMSS_TFE_0_CSID_CLK>,
+				 <&gcc GCC_CAMSS_TFE_1_CSID_CLK>,
+				 <&gcc GCC_CAMSS_CPHY_0_CLK>,
+				 <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
+				 <&gcc GCC_CAMSS_CPHY_1_CLK>,
+				 <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
+				 <&gcc GCC_CAMSS_TOP_AHB_CLK>,
+				 <&gcc GCC_CAMSS_TFE_0_CLK>,
+				 <&gcc GCC_CAMSS_TFE_0_CPHY_RX_CLK>,
+				 <&gcc GCC_CAMSS_TFE_1_CLK>,
+				 <&gcc GCC_CAMSS_TFE_1_CPHY_RX_CLK> ;
+			clock-names = "ahb",
+				      "axi",
+				      "camnoc_nrt_axi",
+				      "camnoc_rt_axi",
+				      "csi0",
+				      "csi1",
+				      "csiphy0",
+				      "csiphy0_timer",
+				      "csiphy1",
+				      "csiphy1_timer",
+				      "top_ahb",
+				      "vfe0",
+				      "vfe0_cphy_rx",
+				      "vfe1",
+				      "vfe1_cphy_rx";
+
+			interrupts = <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 212 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 310 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 211 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 213 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "csid0",
+					  "csid1",
+					  "csiphy0",
+					  "csiphy1",
+					  "csitpg0",
+					  "csitpg1",
+					  "vfe0",
+					  "vfe1";
+
+			interconnects = <&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG
+					 &config_noc SLAVE_CAMERA_CFG RPM_ACTIVE_TAG>,
+					<&mmrt_virt MASTER_CAMNOC_HF RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+					<&mmnrt_virt MASTER_CAMNOC_SF RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+			interconnect-names = "ahb",
+					     "hf_mnoc",
+					     "sf_mnoc";
+
+			iommus = <&apps_smmu 0x400 0x0>,
+				 <&apps_smmu 0x800 0x0>,
+				 <&apps_smmu 0x820 0x0>,
+				 <&apps_smmu 0x840 0x0>;
+
+			power-domains = <&gcc GCC_CAMSS_TOP_GDSC>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
 		mdss: display-subsystem@5e00000 {
 			compatible = "qcom,qcm2290-mdss";
 			reg = <0x0 0x05e00000 0x0 0x1000>;