diff mbox series

[v5,22/25] media: ti-vpe: use pm_runtime_resume_and_get()

Message ID d84de29109f097f13b624b3343a77a5b10847d6f.1620314616.git.mchehab+huawei@kernel.org
State Accepted
Commit 588bc430133c912f0ff39c375eae9baa81978d1e
Headers show
Series media: use pm_runtime_resume_and_get() on non-i2c drivers | expand

Commit Message

Mauro Carvalho Chehab May 6, 2021, 3:26 p.m. UTC 
Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/ti-vpe/cal-video.c | 4 +++-
 drivers/media/platform/ti-vpe/cal.c       | 8 +++++---
 drivers/media/platform/ti-vpe/vpe.c       | 8 +++-----
 3 files changed, 11 insertions(+), 9 deletions(-)
diff mbox series

Patch

diff --git a/drivers/media/platform/ti-vpe/cal-video.c b/drivers/media/platform/ti-vpe/cal-video.c
index 7b7436a355ee..15fb5360cf13 100644
--- a/drivers/media/platform/ti-vpe/cal-video.c
+++ b/drivers/media/platform/ti-vpe/cal-video.c
@@ -700,7 +700,9 @@  static int cal_start_streaming(struct vb2_queue *vq, unsigned int count)
 
 	addr = vb2_dma_contig_plane_dma_addr(&buf->vb.vb2_buf, 0);
 
-	pm_runtime_get_sync(ctx->cal->dev);
+	ret = pm_runtime_resume_and_get(ctx->cal->dev);
+	if (ret < 0)
+		goto error_pipeline;
 
 	cal_ctx_set_dma_addr(ctx, addr);
 	cal_ctx_start(ctx);
diff --git a/drivers/media/platform/ti-vpe/cal.c b/drivers/media/platform/ti-vpe/cal.c
index 2e2bef91b2b0..76fe7a8b33f6 100644
--- a/drivers/media/platform/ti-vpe/cal.c
+++ b/drivers/media/platform/ti-vpe/cal.c
@@ -1024,7 +1024,7 @@  static int cal_probe(struct platform_device *pdev)
 
 	/* Read the revision and hardware info to verify hardware access. */
 	pm_runtime_enable(&pdev->dev);
-	ret = pm_runtime_get_sync(&pdev->dev);
+	ret = pm_runtime_resume_and_get(&pdev->dev);
 	if (ret)
 		goto error_pm_runtime;
 
@@ -1098,10 +1098,11 @@  static int cal_remove(struct platform_device *pdev)
 {
 	struct cal_dev *cal = platform_get_drvdata(pdev);
 	unsigned int i;
+	int ret;
 
 	cal_dbg(1, cal, "Removing %s\n", CAL_MODULE_NAME);
 
-	pm_runtime_get_sync(&pdev->dev);
+	ret = pm_runtime_resume_and_get(&pdev->dev);
 
 	cal_media_unregister(cal);
 
@@ -1115,7 +1116,8 @@  static int cal_remove(struct platform_device *pdev)
 	for (i = 0; i < cal->data->num_csi2_phy; i++)
 		cal_camerarx_destroy(cal->phy[i]);
 
-	pm_runtime_put_sync(&pdev->dev);
+	if (ret >= 0)
+		pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 
 	return 0;
diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 10251b787674..5b1c5d96a407 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -2471,11 +2471,9 @@  static int vpe_runtime_get(struct platform_device *pdev)
 
 	dev_dbg(&pdev->dev, "vpe_runtime_get\n");
 
-	r = pm_runtime_get_sync(&pdev->dev);
+	r = pm_runtime_resume_and_get(&pdev->dev);
 	WARN_ON(r < 0);
-	if (r)
-		pm_runtime_put_noidle(&pdev->dev);
-	return r < 0 ? r : 0;
+	return r;
 }
 
 static void vpe_runtime_put(struct platform_device *pdev)
@@ -2580,7 +2578,7 @@  static int vpe_probe(struct platform_device *pdev)
 	pm_runtime_enable(&pdev->dev);
 
 	ret = vpe_runtime_get(pdev);
-	if (ret)
+	if (ret < 0)
 		goto rel_m2m;
 
 	/* Perform clk enable followed by reset */