diff mbox series

[v5,6/9] media: adv748x: prepare/enable mclk when the audio is used

Message ID d9b7a7290e3d95b484a7a760484f827c3ed7651e.1585852001.git.alexander.riesen@cetitec.com
State Superseded
Headers show
Series media: adv748x: add support for HDMI audio | expand

Commit Message

Alex Riesen April 2, 2020, 6:34 p.m. UTC 
As there is nothing else (the consumers are supposed to do that) which
enables the clock, do it in the driver.

Signed-off-by: Alexander Riesen <alexander.riesen@cetitec.com>
--

v3: added
---
 drivers/media/i2c/adv748x/adv748x-dai.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/media/i2c/adv748x/adv748x-dai.c b/drivers/media/i2c/adv748x/adv748x-dai.c
index c9191f8f1ca8..185f78023e91 100644
--- a/drivers/media/i2c/adv748x/adv748x-dai.c
+++ b/drivers/media/i2c/adv748x/adv748x-dai.c
@@ -117,11 +117,22 @@  static int adv748x_dai_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 
 static int adv748x_dai_startup(struct snd_pcm_substream *sub, struct snd_soc_dai *dai)
 {
+	int ret;
 	struct adv748x_state *state = state_of(dai);
 
 	if (sub->stream != SNDRV_PCM_STREAM_CAPTURE)
 		return -EINVAL;
-	return set_audio_pads_state(state, 1);
+	ret = set_audio_pads_state(state, 1);
+	if (ret)
+		goto fail;
+	ret = clk_prepare_enable(mclk_of(state));
+	if (ret)
+		goto fail_pwdn;
+	return 0;
+fail_pwdn:
+	set_audio_pads_state(state, 0);
+fail:
+	return ret;
 }
 
 static int adv748x_dai_hw_params(struct snd_pcm_substream *sub,
@@ -174,6 +185,7 @@  static void adv748x_dai_shutdown(struct snd_pcm_substream *sub, struct snd_soc_d
 {
 	struct adv748x_state *state = state_of(dai);
 
+	clk_disable_unprepare(mclk_of(state));
 	set_audio_pads_state(state, 0);
 }