mbox series

[V1,0/2] Adjust some error messages for SD UHS-II initialization process

Message ID 20250516092716.3918-1-victorshihgli@gmail.com
Headers show
Series Adjust some error messages for SD UHS-II initialization process | expand

Message

Victor Shih May 16, 2025, 9:27 a.m. UTC 
From: Victor Shih <victor.shih@genesyslogic.com.tw>

Summary
=======
It is normal that errors will occur when using non-UHS-II card to enter
the UHS-II card initialization process. We should not be producing error
messages and register dumps. Therefore, switch the error messages to debug
mode and register dumps to dynamic debug mode.

Patch structure
===============
patch#1: for core
patch#2: for sdhci

Changes in v1 (May. 16, 2025)
* Rebase on latest mmc/next.
* Patch#1: Adjust some error messages for SD UHS-II cards.
* Patch#2: Adjust some error messages and register dump for SD UHS-II card

Victor Shih (2):
  mmc: core: Adjust some error messages for SD UHS-II cards
  mmc: sdhci-uhs2: Adjust some error messages and register dump for SD
    UHS-II card

 drivers/mmc/core/sd_uhs2.c    |  8 ++++++--
 drivers/mmc/host/sdhci-uhs2.c | 18 +++++++++---------
 drivers/mmc/host/sdhci.h      | 16 ++++++++++++++++
 3 files changed, 31 insertions(+), 11 deletions(-)

Comments

Ben Chuang May 19, 2025, 12:30 a.m. UTC | #1 
Hi,

These patches were contributed by Victor alone. Please remove my
'Signed-off-by'.

Best regards,
Ben Chuang

On Fri, May 16, 2025 at 5:27 PM Victor Shih <victorshihgli@gmail.com> wrote:
>
> From: Victor Shih <victor.shih@genesyslogic.com.tw>
>
> Summary
> =======
> It is normal that errors will occur when using non-UHS-II card to enter
> the UHS-II card initialization process. We should not be producing error
> messages and register dumps. Therefore, switch the error messages to debug
> mode and register dumps to dynamic debug mode.
>
> Patch structure
> ===============
> patch#1: for core
> patch#2: for sdhci
>
> Changes in v1 (May. 16, 2025)
> * Rebase on latest mmc/next.
> * Patch#1: Adjust some error messages for SD UHS-II cards.
> * Patch#2: Adjust some error messages and register dump for SD UHS-II card
>
> Victor Shih (2):
>   mmc: core: Adjust some error messages for SD UHS-II cards
>   mmc: sdhci-uhs2: Adjust some error messages and register dump for SD
>     UHS-II card
>
>  drivers/mmc/core/sd_uhs2.c    |  8 ++++++--
>  drivers/mmc/host/sdhci-uhs2.c | 18 +++++++++---------
>  drivers/mmc/host/sdhci.h      | 16 ++++++++++++++++
>  3 files changed, 31 insertions(+), 11 deletions(-)
>
> --
> 2.43.0
>