@@ -25,6 +25,7 @@
#include <linux/platform_data/video-ep93xx.h>
#include <linux/platform_data/spi-ep93xx.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <mach/hardware.h>
#include <mach/gpio-ep93xx.h>
@@ -45,9 +46,15 @@ static struct ep93xxfb_mach_info __initdata simone_fb_info = {
static struct mmc_spi_platform_data simone_mmc_spi_data = {
.detect_delay = 500,
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .flags = MMC_SPI_USE_CD_GPIO,
- .cd_gpio = EP93XX_GPIO_LINE_EGPIO0,
- .cd_debounce = 1,
+};
+
+static struct gpiod_lookup_table simone_mmc_spi_gpio_table = {
+ .dev_id = "mmc_spi.0", /* "mmc_spi" @ CS0 */
+ .table = {
+ /* Card detect */
+ GPIO_LOOKUP_IDX("A", 0, NULL, 0, GPIO_ACTIVE_LOW),
+ { },
+ },
};
static struct spi_board_info simone_spi_devices[] __initdata = {
@@ -105,6 +112,7 @@ static void __init simone_init_machine(void)
ep93xx_register_fb(&simone_fb_info);
ep93xx_register_i2c(simone_i2c_board_info,
ARRAY_SIZE(simone_i2c_board_info));
+ gpiod_add_lookup_table(&simone_mmc_spi_gpio_table);
ep93xx_register_spi(&simone_spi_info, simone_spi_devices,
ARRAY_SIZE(simone_spi_devices));
simone_register_audio();
@@ -18,6 +18,7 @@
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/fb.h>
#include <linux/io.h>
#include <linux/mtd/partitions.h>
@@ -202,13 +203,20 @@ static struct mmc_spi_platform_data vision_spi_mmc_data = {
.detect_delay = 100,
.powerup_msecs = 100,
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .flags = MMC_SPI_USE_CD_GPIO | MMC_SPI_USE_RO_GPIO,
- .cd_gpio = EP93XX_GPIO_LINE_EGPIO15,
- .cd_debounce = 1,
- .ro_gpio = EP93XX_GPIO_LINE_F(0),
.caps2 = MMC_CAP2_RO_ACTIVE_HIGH,
};
+static struct gpiod_lookup_table vision_spi_mmc_gpio_table = {
+ .dev_id = "mmc_spi.2", /* "mmc_spi @ CS2 */
+ .table = {
+ /* Card detect */
+ GPIO_LOOKUP_IDX("B", 7, NULL, 0, GPIO_ACTIVE_LOW),
+ /* Write protect */
+ GPIO_LOOKUP_IDX("F", 0, NULL, 1, GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
/*************************************************************************
* SPI Bus
*************************************************************************/
@@ -286,6 +294,7 @@ static void __init vision_init_machine(void)
ep93xx_register_i2c(vision_i2c_info,
ARRAY_SIZE(vision_i2c_info));
+ gpiod_add_lookup_table(&vision_spi_mmc_gpio_table);
ep93xx_register_spi(&vision_spi_master, vision_spi_board_info,
ARRAY_SIZE(vision_spi_board_info));
vision_register_i2s();
@@ -776,9 +776,19 @@ static struct mmc_spi_platform_data mmc_spi_info = {
.caps2 = MMC_CAP2_RO_ACTIVE_HIGH,
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* 3.3V only */
.setpower = mmc_spi_setpower,
- .flags = MMC_SPI_USE_CD_GPIO | MMC_SPI_USE_RO_GPIO,
- .cd_gpio = GPIO_PTY7,
- .ro_gpio = GPIO_PTY6,
+};
+
+static struct gpiod_lookup_table mmc_spi_gpio_table = {
+ .dev_id = "mmc_spi.0", /* device "mmc_spi" @ CS0 */
+ .table = {
+ /* Card detect */
+ GPIO_LOOKUP_IDX("sh7724_pfc", GPIO_PTY7, NULL, 0,
+ GPIO_ACTIVE_LOW),
+ /* Write protect */
+ GPIO_LOOKUP_IDX("sh7724_pfc", GPIO_PTY6, NULL, 1,
+ GPIO_ACTIVE_HIGH),
+ { },
+ },
};
static struct spi_board_info spi_bus[] = {
@@ -1282,6 +1292,7 @@ static int __init arch_setup(void)
gpio_request(GPIO_PTB6, NULL); /* 3.3V power control */
gpio_direction_output(GPIO_PTB6, 0); /* disable power by default */
+ gpiod_add_lookup_table(&mmc_spi_gpio_table);
spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus));
#endif
@@ -1434,13 +1434,16 @@ static int mmc_spi_probe(struct spi_device *spi)
if (status != 0)
goto fail_add_host;
- if (host->pdata && host->pdata->flags & MMC_SPI_USE_CD_GPIO) {
- status = mmc_gpio_request_cd(mmc, host->pdata->cd_gpio,
- host->pdata->cd_debounce);
- if (status != 0)
- goto fail_add_host;
-
- /* The platform has a CD GPIO signal that may support
+ /*
+ * Index 0 is card detect
+ * Old boardfiles were specifying 1 ms as debounce
+ */
+ status = mmc_gpiod_request_cd(mmc, NULL, 0, false, 1, NULL);
+ if (status == -EPROBE_DEFER)
+ goto fail_add_host;
+ if (!status) {
+ /*
+ * The platform has a CD GPIO signal that may support
* interrupts, so let mmc_gpiod_request_cd_irq() decide
* if polling is needed or not.
*/
@@ -1448,12 +1451,12 @@ static int mmc_spi_probe(struct spi_device *spi)
mmc_gpiod_request_cd_irq(mmc);
}
- if (host->pdata && host->pdata->flags & MMC_SPI_USE_RO_GPIO) {
+ /* Index 1 is write protect/read only */
+ status = mmc_gpiod_request_ro(mmc, NULL, 1, false, 0, NULL);
+ if (status == -EPROBE_DEFER)
+ goto fail_add_host;
+ if (!status)
has_ro = true;
- status = mmc_gpio_request_ro(mmc, host->pdata->ro_gpio);
- if (status != 0)
- goto fail_add_host;
- }
dev_info(&spi->dev, "SD/MMC host %s%s%s%s%s\n",
dev_name(&mmc->class_dev),
@@ -16,9 +16,7 @@
#include <linux/device.h>
#include <linux/slab.h>
#include <linux/irq.h>
-#include <linux/gpio.h>
#include <linux/of.h>
-#include <linux/of_gpio.h>
#include <linux/of_irq.h>
#include <linux/spi/spi.h>
#include <linux/spi/mmc_spi.h>
@@ -32,15 +30,7 @@
MODULE_LICENSE("GPL");
-enum {
- CD_GPIO = 0,
- WP_GPIO,
- NUM_GPIOS,
-};
-
struct of_mmc_spi {
- int gpios[NUM_GPIOS];
- bool alow_gpios[NUM_GPIOS];
int detect_irq;
struct mmc_spi_platform_data pdata;
};
@@ -102,30 +92,6 @@ struct mmc_spi_platform_data *mmc_spi_get_pdata(struct spi_device *spi)
oms->pdata.ocr_mask |= mask;
}
- for (i = 0; i < ARRAY_SIZE(oms->gpios); i++) {
- enum of_gpio_flags gpio_flags;
-
- oms->gpios[i] = of_get_gpio_flags(np, i, &gpio_flags);
- if (!gpio_is_valid(oms->gpios[i]))
- continue;
-
- if (gpio_flags & OF_GPIO_ACTIVE_LOW)
- oms->alow_gpios[i] = true;
- }
-
- if (gpio_is_valid(oms->gpios[CD_GPIO])) {
- oms->pdata.cd_gpio = oms->gpios[CD_GPIO];
- oms->pdata.flags |= MMC_SPI_USE_CD_GPIO;
- if (!oms->alow_gpios[CD_GPIO])
- oms->pdata.caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
- }
- if (gpio_is_valid(oms->gpios[WP_GPIO])) {
- oms->pdata.ro_gpio = oms->gpios[WP_GPIO];
- oms->pdata.flags |= MMC_SPI_USE_RO_GPIO;
- if (!oms->alow_gpios[WP_GPIO])
- oms->pdata.caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
- }
-
oms->detect_irq = irq_of_parse_and_map(np, 0);
if (oms->detect_irq != 0) {
oms->pdata.init = of_mmc_spi_init;
@@ -8,11 +8,6 @@
struct device;
struct mmc_host;
-#define MMC_SPI_USE_CD_GPIO (1 << 0)
-#define MMC_SPI_USE_RO_GPIO (1 << 1)
-#define MMC_SPI_CD_GPIO_ACTIVE_LOW (1 << 2)
-#define MMC_SPI_RO_GPIO_ACTIVE_LOW (1 << 3)
-
/* Put this in platform_data of a device being used to manage an MMC/SD
* card slot. (Modeled after PXA mmc glue; see that for usage examples.)
*
@@ -27,16 +22,6 @@ struct mmc_spi_platform_data {
void *);
void (*exit)(struct device *, void *);
- /*
- * Card Detect and Read Only GPIOs. To enable debouncing on the card
- * detect GPIO, set the cd_debounce to the debounce time in
- * microseconds.
- */
- unsigned int flags;
- unsigned int cd_gpio;
- unsigned int cd_debounce;
- unsigned int ro_gpio;
-
/* Capabilities to pass into mmc core (e.g. MMC_CAP_NEEDS_POLL). */
unsigned long caps;
unsigned long caps2;