[v2,10/11] dt-bindings: PCI: convert amlogic,meson-pcie.txt to dt-schema

diff --git a/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml b/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml
new file mode 100644
index 000000000000..a08f15fe9a9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml
@@ -0,0 +1,134 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/amlogic,axg-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson AXG DWC PCIE SoC controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description:
+  Amlogic Meson PCIe host controller is based on the Synopsys DesignWare PCI core.
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/snps,dw-pcie-common.yaml#
+
+# We need a select here so we don't match all nodes with 'snps,dw-pcie'
+select:
+  properties:
+    compatible:
+      enum:
+        - amlogic,axg-pcie
+        - amlogic,g12a-pcie
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - amlogic,axg-pcie
+          - amlogic,g12a-pcie
+      - const: snps,dw-pcie
+
+  reg:
+    items:
+      - description: External local bus interface registers
+      - description: Meson designed configuration registers
+      - description: PCIe configuration space
+
+  reg-names:
+    items:
+      - const: elbi
+      - const: cfg
+      - const: config
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: PCIe GEN 100M PLL clock
+      - description: PCIe RC clock gate
+      - description: PCIe PHY clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: port
+      - const: general
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie
+
+  resets:
+    items:
+      - description: Port Reset
+      - description: Shared APB reset
+
+  reset-names:
+    items:
+      - const: port
+      - const: apb
+
+  num-lanes:
+    const: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clock
+  - clock-names
+  - "#address-cells"
+  - "#size-cells"
+  - "#interrupt-cells"
+  - interrupt-map
+  - interrupt-map-mask
+  - ranges
+  - bus-range
+  - device_type
+  - num-lanes
+  - phys
+  - phy-names
+  - resets
+  - reset-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pcie: pcie@f9800000 {
+        compatible = "amlogic,axg-pcie", "snps,dw-pcie";
+        reg = <0xf9800000 0x400000>, <0xff646000 0x2000>, <0xf9f00000 0x100000>;
+        reg-names = "elbi", "cfg", "config";
+        interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
+        clocks = <&pclk>, <&clk_port>, <&clk_phy>;
+        clock-names = "pclk", "port", "general";
+        resets = <&reset_pcie_port>, <&reset_pcie_apb>;
+        reset-names = "port", "apb";
+        phys = <&pcie_phy>;
+        phy-names = "pcie";
+        #interrupt-cells = <1>;
+        interrupt-map-mask = <0 0 0 0>;
+        interrupt-map = <0 0 0 0 &gic GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
+        bus-range = <0x0 0xff>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        device_type = "pci";
+        num-lanes = <1>;
+        ranges = <0x82000000 0 0 0xf9c00000 0 0x00300000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt b/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
deleted file mode 100644
index c3a75ac6e59d..000000000000
--- a/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
+++ /dev/null
@@ -1,70 +0,0 @@ 
-Amlogic Meson AXG DWC PCIE SoC controller
-
-Amlogic Meson PCIe host controller is based on the Synopsys DesignWare PCI core.
-It shares common functions with the PCIe DesignWare core driver and
-inherits common properties defined in
-Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
-
-Additional properties are described here:
-
-Required properties:
-- compatible:
-	should contain :
-	- "amlogic,axg-pcie" for AXG SoC Family
-	- "amlogic,g12a-pcie" for G12A SoC Family
-	to identify the core.
-- reg:
-	should contain the configuration address space.
-- reg-names: Must be
-	- "elbi"	External local bus interface registers
-	- "cfg"		Meson specific registers
-	- "config"	PCIe configuration space
-- reset-gpios: The GPIO to generate PCIe PERST# assert and deassert signal.
-- clocks: Must contain an entry for each entry in clock-names.
-- clock-names: Must include the following entries:
-	- "pclk"       PCIe GEN 100M PLL clock
-	- "port"       PCIe_x(A or B) RC clock gate
-	- "general"    PCIe Phy clock
-- resets: phandle to the reset lines.
-- reset-names: must contain "port" and "apb"
-       - "port"        Port A or B reset
-       - "apb"         Share APB reset
-- phys: should contain a phandle to the PCIE phy
-- phy-names: must contain "pcie"
-
-- device_type:
-	should be "pci". As specified in snps,dw-pcie.yaml
-
-
-Example configuration:
-
-	pcie: pcie@f9800000 {
-			compatible = "amlogic,axg-pcie", "snps,dw-pcie";
-			reg = <0x0 0xf9800000 0x0 0x400000
-					0x0 0xff646000 0x0 0x2000
-					0x0 0xf9f00000 0x0 0x100000>;
-			reg-names = "elbi", "cfg", "config";
-			reset-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
-			interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &gic GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
-			bus-range = <0x0 0xff>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			ranges = <0x82000000 0 0 0x0 0xf9c00000 0 0x00300000>;
-
-			clocks = <&clkc CLKID_USB
-					&clkc CLKID_PCIE_A
-					&clkc CLKID_PCIE_CML_EN0>;
-			clock-names = "general",
-					"pclk",
-					"port";
-			resets = <&reset RESET_PCIE_A>,
-				<&reset RESET_PCIE_APB>;
-			reset-names = "port",
-					"apb";
-			phys = <&pcie_phy>;
-			phy-names = "pcie";
-	};