From patchwork Thu Mar 6 14:22:57 2014 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Roger Quadros X-Patchwork-Id: 25803 Return-Path: X-Original-To: linaro@patches.linaro.org Delivered-To: linaro@patches.linaro.org Received: from mail-ig0-f200.google.com (mail-ig0-f200.google.com [209.85.213.200]) by ip-10-151-82-157.ec2.internal (Postfix) with ESMTPS id B8147203C3 for ; Thu, 6 Mar 2014 14:24:29 +0000 (UTC) Received: by mail-ig0-f200.google.com with SMTP id h18sf13335372igc.3 for ; Thu, 06 Mar 2014 06:24:29 -0800 (PST) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20130820; h=x-gm-message-state:delivered-to:from:to:cc:subject:date:message-id :in-reply-to:references:mime-version:sender:precedence:list-id :x-original-sender:x-original-authentication-results:mailing-list :list-post:list-help:list-archive:list-unsubscribe:content-type; bh=2ub83lzerEiq29daQTYOX3msMgKRlxj/3LTbm4Wi2Wo=; b=f2cHPYebjfORO8/zI9Zh3+VU4hnw+7kFlv16s7gCReEG0GSTAwlvV5r8/7g4IR04aw 93RJXbe6TaVGMTJKDAh6IRA/+5xMgLvImjR65ZJgocK+VxK6e7lKZKl3myRQgQ1k2FNQ EhgPbGSYGGaT4ZFy8Nvu3+/kf07H4ZqsZOpokrOTgifhdWsd0bjdvpACERftXAXq6AtN 5fZYzi83/3SU0aNKOvyHcBSgl+f03hUyWefPPt8qH1ajo6tM8/H3/BqPdTAKaQ22SPcn 130DbKMpQ1R1dGbri1EMWnD+AsZzUMJoiykBwKbD/Omq/7is6slekwZzZSNxBy5+712R MM2w== X-Gm-Message-State: ALoCoQl7zM4/oLaFso+sqQVT6rV64HMrAyoPH4BCaGzaceG89x/utWDh6PWvrkTKXIfRYeep1mpe X-Received: by 10.182.87.2 with SMTP id t2mr5640693obz.2.1394115869020; Thu, 06 Mar 2014 06:24:29 -0800 (PST) X-BeenThere: patchwork-forward@linaro.org Received: by 10.140.42.14 with SMTP id b14ls741404qga.47.gmail; Thu, 06 Mar 2014 06:24:28 -0800 (PST) X-Received: by 10.221.37.1 with SMTP id tc1mr387801vcb.32.1394115868790; Thu, 06 Mar 2014 06:24:28 -0800 (PST) Received: from mail-vc0-f179.google.com (mail-vc0-f179.google.com [209.85.220.179]) by mx.google.com with ESMTPS id xj4si1167821vec.18.2014.03.06.06.24.28 for (version=TLSv1 cipher=ECDHE-RSA-RC4-SHA bits=128/128); Thu, 06 Mar 2014 06:24:28 -0800 (PST) Received-SPF: neutral (google.com: 209.85.220.179 is neither permitted nor denied by best guess record for domain of patch+caf_=patchwork-forward=linaro.org@linaro.org) client-ip=209.85.220.179; Received: by mail-vc0-f179.google.com with SMTP id ij19so2180096vcb.24 for ; Thu, 06 Mar 2014 06:24:28 -0800 (PST) X-Received: by 10.220.10.2 with SMTP id n2mr1526582vcn.26.1394115868697; Thu, 06 Mar 2014 06:24:28 -0800 (PST) X-Forwarded-To: patchwork-forward@linaro.org X-Forwarded-For: patch@linaro.org patchwork-forward@linaro.org Delivered-To: patch@linaro.org Received: by 10.220.78.9 with SMTP id i9csp42115vck; Thu, 6 Mar 2014 06:24:27 -0800 (PST) X-Received: by 10.68.231.35 with SMTP id td3mr14392050pbc.137.1394115867430; Thu, 06 Mar 2014 06:24:27 -0800 (PST) Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id bs8si5042566pad.302.2014.03.06.06.24.26; Thu, 06 Mar 2014 06:24:26 -0800 (PST) Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752730AbaCFOYK (ORCPT + 26 others); Thu, 6 Mar 2014 09:24:10 -0500 Received: from devils.ext.ti.com ([198.47.26.153]:58159 "EHLO devils.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752588AbaCFOYE (ORCPT ); Thu, 6 Mar 2014 09:24:04 -0500 Received: from dflxv15.itg.ti.com ([128.247.5.124]) by devils.ext.ti.com (8.13.7/8.13.7) with ESMTP id s26ENShO004484; Thu, 6 Mar 2014 08:23:28 -0600 Received: from DFLE72.ent.ti.com (dfle72.ent.ti.com [128.247.5.109]) by dflxv15.itg.ti.com (8.14.3/8.13.8) with ESMTP id s26ENSWo025902; Thu, 6 Mar 2014 08:23:28 -0600 Received: from dlep33.itg.ti.com (157.170.170.75) by DFLE72.ent.ti.com (128.247.5.109) with Microsoft SMTP Server id 14.3.174.1; Thu, 6 Mar 2014 08:23:28 -0600 Received: from localhost.localdomain (ileax41-snat.itg.ti.com [10.172.224.153]) by dlep33.itg.ti.com (8.14.3/8.13.8) with ESMTP id s26EN6k4018891; Thu, 6 Mar 2014 08:23:25 -0600 From: Roger Quadros To: , , CC: , , , , , , , , , Subject: [PATCH v2 05/13] phy: ti-pipe3: Add SATA DPLL support Date: Thu, 6 Mar 2014 16:22:57 +0200 Message-ID: <1394115785-28301-6-git-send-email-rogerq@ti.com> X-Mailer: git-send-email 1.8.3.2 In-Reply-To: <1394115785-28301-1-git-send-email-rogerq@ti.com> References: <1394115785-28301-1-git-send-email-rogerq@ti.com> MIME-Version: 1.0 Sender: linux-kernel-owner@vger.kernel.org Precedence: list List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-Removed-Original-Auth: Dkim didn't pass. X-Original-Sender: rogerq@ti.com X-Original-Authentication-Results: mx.google.com; spf=neutral (google.com: 209.85.220.179 is neither permitted nor denied by best guess record for domain of patch+caf_=patchwork-forward=linaro.org@linaro.org) smtp.mail=patch+caf_=patchwork-forward=linaro.org@linaro.org Mailing-list: list patchwork-forward@linaro.org; contact patchwork-forward+owners@linaro.org X-Google-Group-Id: 836684582541 List-Post: , List-Help: , List-Archive: List-Unsubscribe: , USB and SATA DPLLs need different settings. Provide the SATA DPLL settings and use the proper DPLL settings based on device tree node's compatible_id. Update the DT binding information. Signed-off-by: Roger Quadros --- Documentation/devicetree/bindings/phy/ti-phy.txt | 3 +- drivers/phy/phy-ti-pipe3.c | 76 +++++++++++++++++------- 2 files changed, 57 insertions(+), 22 deletions(-) diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt index 8d13349..2c2d66a 100644 --- a/Documentation/devicetree/bindings/phy/ti-phy.txt +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt @@ -53,7 +53,8 @@ usb2phy@4a0ad080 { TI PIPE3 PHY Required properties: - - compatible: Should be "ti,phy-usb3". "ti,omap-usb3" is deprecated. + - compatible: Should be "ti,phy-usb3" or "ti,phy-pipe3-sata". + "ti,omap-usb3" is deprecated. - reg : Address and length of the register set for the device. - reg-names: The names of the register addresses corresponding to the registers filled in "reg". diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c index 211703c..f141237 100644 --- a/drivers/phy/phy-ti-pipe3.c +++ b/drivers/phy/phy-ti-pipe3.c @@ -66,6 +66,11 @@ struct pipe3_dpll_params { u32 mf; }; +struct pipe3_dpll_map { + unsigned long rate; + struct pipe3_dpll_params params; +}; + struct ti_pipe3 { void __iomem *pll_ctrl_base; struct device *dev; @@ -73,20 +78,27 @@ struct ti_pipe3 { struct clk *wkupclk; struct clk *sys_clk; struct clk *refclk; + struct pipe3_dpll_map *dpll_map; }; -struct pipe3_dpll_map { - unsigned long rate; - struct pipe3_dpll_params params; -}; - -static struct pipe3_dpll_map dpll_map[] = { +static struct pipe3_dpll_map dpll_map_usb[] = { {12000000, {1250, 5, 4, 20, 0} }, /* 12 MHz */ {16800000, {3125, 20, 4, 20, 0} }, /* 16.8 MHz */ {19200000, {1172, 8, 4, 20, 65537} }, /* 19.2 MHz */ {20000000, {1000, 7, 4, 10, 0} }, /* 20 MHz */ {26000000, {1250, 12, 4, 20, 0} }, /* 26 MHz */ {38400000, {3125, 47, 4, 20, 92843} }, /* 38.4 MHz */ + { }, /* Terminator */ +}; + +static struct pipe3_dpll_map dpll_map_sata[] = { + {12000000, {1000, 7, 4, 6, 0} }, /* 12 MHz */ + {16800000, {714, 7, 4, 6, 0} }, /* 16.8 MHz */ + {19200000, {625, 7, 4, 6, 0} }, /* 19.2 MHz */ + {20000000, {600, 7, 4, 6, 0} }, /* 20 MHz */ + {26000000, {461, 7, 4, 6, 0} }, /* 26 MHz */ + {38400000, {312, 7, 4, 6, 0} }, /* 38.4 MHz */ + { }, /* Terminator */ }; static inline u32 ti_pipe3_readl(void __iomem *addr, unsigned offset) @@ -100,15 +112,20 @@ static inline void ti_pipe3_writel(void __iomem *addr, unsigned offset, __raw_writel(data, addr + offset); } -static struct pipe3_dpll_params *ti_pipe3_get_dpll_params(unsigned long rate) +static struct pipe3_dpll_params *ti_pipe3_get_dpll_params(struct ti_pipe3 *phy) { - int i; + unsigned long rate; + struct pipe3_dpll_map *dpll_map = phy->dpll_map; - for (i = 0; i < ARRAY_SIZE(dpll_map); i++) { - if (rate == dpll_map[i].rate) - return &dpll_map[i].params; + rate = clk_get_rate(phy->sys_clk); + + for (; dpll_map->rate; dpll_map++) { + if (rate == dpll_map->rate) + return &dpll_map->params; } + dev_err(phy->dev, "No DPLL configuration for %lu Hz SYS CLK\n", rate); + return NULL; } @@ -182,16 +199,11 @@ static void ti_pipe3_dpll_relock(struct ti_pipe3 *phy) static int ti_pipe3_dpll_lock(struct ti_pipe3 *phy) { u32 val; - unsigned long rate; struct pipe3_dpll_params *dpll_params; - rate = clk_get_rate(phy->sys_clk); - dpll_params = ti_pipe3_get_dpll_params(rate); - if (!dpll_params) { - dev_err(phy->dev, - "No DPLL configuration for %lu Hz SYS CLK\n", rate); + dpll_params = ti_pipe3_get_dpll_params(phy); + if (!dpll_params) return -EINVAL; - } val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1); val &= ~PLL_REGN_MASK; @@ -244,6 +256,10 @@ static struct phy_ops ops = { .owner = THIS_MODULE, }; +#ifdef CONFIG_OF +static const struct of_device_id ti_pipe3_id_table[]; +#endif + static int ti_pipe3_probe(struct platform_device *pdev) { struct ti_pipe3 *phy; @@ -253,8 +269,10 @@ static int ti_pipe3_probe(struct platform_device *pdev) struct device_node *node = pdev->dev.of_node; struct device_node *control_node; struct platform_device *control_pdev; + const struct of_device_id *match; - if (!node) + match = of_match_device(of_match_ptr(ti_pipe3_id_table), &pdev->dev); + if (!match) return -EINVAL; phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL); @@ -263,6 +281,12 @@ static int ti_pipe3_probe(struct platform_device *pdev) return -ENOMEM; } + phy->dpll_map = (struct pipe3_dpll_map *)match->data; + if (!phy->dpll_map) { + dev_err(&pdev->dev, "no DPLL data\n"); + return -EINVAL; + } + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pll_ctrl"); phy->pll_ctrl_base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(phy->pll_ctrl_base)) @@ -388,8 +412,18 @@ static const struct dev_pm_ops ti_pipe3_pm_ops = { #ifdef CONFIG_OF static const struct of_device_id ti_pipe3_id_table[] = { - { .compatible = "ti,phy-usb3" }, - { .compatible = "ti,omap-usb3" }, + { + .compatible = "ti,phy-usb3", + .data = dpll_map_usb, + }, + { + .compatible = "ti,omap-usb3", + .data = dpll_map_usb, + }, + { + .compatible = "ti,phy-pipe3-sata", + .data = dpll_map_sata, + }, {} }; MODULE_DEVICE_TABLE(of, ti_pipe3_id_table);