diff mbox series

[16/27] ARM: OMAP2+: Drop legacy platform data for dra7 pcie

Message ID 20210126082716.54358-17-tony@atomide.com
State Superseded
Headers show
Series Update dra7 to probe with genpd to drop legacy pdata | expand

Commit Message

Tony Lindgren Jan. 26, 2021, 8:27 a.m. UTC
We can now probe devices with ti-sysc interconnect driver and dts data.
Let's drop the related platform data and custom ti,hwmods dts property.

As we're just dropping data, and the early platform data init is based on
the custom ti,hwmods property, we want to drop both the platform data and
ti,hwmods property in a single patch.

Cc: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/dra7.dtsi               |   3 -
 arch/arm/mach-omap2/common.h              |   9 --
 arch/arm/mach-omap2/omap_hwmod.c          |   8 --
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 114 ----------------------
 4 files changed, 134 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -215,7 +215,6 @@  pcie1_rc: pcie@51000000 {
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
 				linux,pci-domain = <0>;
-				ti,hwmods = "pcie1";
 				phys = <&pcie1_phy>;
 				phy-names = "pcie-phy0";
 				ti,syscon-lane-sel = <&scm_conf_pcie 0x18>;
@@ -243,7 +242,6 @@  pcie1_ep: pcie_ep@51000000 {
 				num-lanes = <1>;
 				num-ib-windows = <4>;
 				num-ob-windows = <16>;
-				ti,hwmods = "pcie1";
 				phys = <&pcie1_phy>;
 				phy-names = "pcie-phy0";
 				ti,syscon-unaligned-access = <&scm_conf1 0x14 1>;
@@ -288,7 +286,6 @@  pcie2_rc: pcie@51800000 {
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
 				linux,pci-domain = <1>;
-				ti,hwmods = "pcie2";
 				phys = <&pcie2_phy>;
 				phy-names = "pcie-phy0";
 				interrupt-map-mask = <0 0 0 7>;
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -343,15 +343,6 @@  static inline void omap5_secondary_hyp_startup(void)
 }
 #endif
 
-#ifdef CONFIG_SOC_DRA7XX
-extern int dra7xx_pciess_reset(struct omap_hwmod *oh);
-#else
-static inline int dra7xx_pciess_reset(struct omap_hwmod *oh)
-{
-	return 0;
-}
-#endif
-
 struct omap_system_dma_plat_info;
 
 void pdata_quirks_init(const struct of_device_id *);
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -3495,10 +3495,6 @@  static const struct omap_hwmod_reset omap24xx_reset_quirks[] = {
 	{ .match = "msdi", .len = 4, .reset = omap_msdi_reset, },
 };
 
-static const struct omap_hwmod_reset dra7_reset_quirks[] = {
-	{ .match = "pcie", .len = 4, .reset = dra7xx_pciess_reset, },
-};
-
 static const struct omap_hwmod_reset omap_reset_quirks[] = {
 	{ .match = "dss_core", .len = 8, .reset = omap_dss_reset, },
 	{ .match = "hdq1w", .len = 5, .reset = omap_hdq1w_reset, },
@@ -3534,10 +3530,6 @@  omap_hwmod_init_reset_quirks(struct device *dev, struct omap_hwmod *oh,
 					    omap24xx_reset_quirks,
 					    ARRAY_SIZE(omap24xx_reset_quirks));
 
-	if (soc_is_dra7xx())
-		omap_hwmod_init_reset_quirk(dev, oh, data, dra7_reset_quirks,
-					    ARRAY_SIZE(dra7_reset_quirks));
-
 	omap_hwmod_init_reset_quirk(dev, oh, data, omap_reset_quirks,
 				    ARRAY_SIZE(omap_reset_quirks));
 }
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -266,84 +266,6 @@  static struct omap_hwmod dra7xx_mpu_hwmod = {
 	},
 };
 
-
-/*
- * 'PCIE' class
- *
- */
-
-/*
- * As noted in documentation for _reset() in omap_hwmod.c, the stock reset
- * functionality of OMAP HWMOD layer does not deassert the hardreset lines
- * associated with an IP automatically leaving the driver to handle that
- * by itself. This does not work for PCIeSS which needs the reset lines
- * deasserted for the driver to start accessing registers.
- *
- * We use a PCIeSS HWMOD class specific reset handler to deassert the hardreset
- * lines after asserting them.
- */
-int dra7xx_pciess_reset(struct omap_hwmod *oh)
-{
-	int i;
-
-	for (i = 0; i < oh->rst_lines_cnt; i++) {
-		omap_hwmod_assert_hardreset(oh, oh->rst_lines[i].name);
-		omap_hwmod_deassert_hardreset(oh, oh->rst_lines[i].name);
-	}
-
-	return 0;
-}
-
-static struct omap_hwmod_class dra7xx_pciess_hwmod_class = {
-	.name	= "pcie",
-	.reset	= dra7xx_pciess_reset,
-};
-
-/* pcie1 */
-static struct omap_hwmod_rst_info dra7xx_pciess1_resets[] = {
-	{ .name = "pcie", .rst_shift = 0 },
-};
-
-static struct omap_hwmod dra7xx_pciess1_hwmod = {
-	.name		= "pcie1",
-	.class		= &dra7xx_pciess_hwmod_class,
-	.clkdm_name	= "pcie_clkdm",
-	.rst_lines	= dra7xx_pciess1_resets,
-	.rst_lines_cnt	= ARRAY_SIZE(dra7xx_pciess1_resets),
-	.main_clk	= "l4_root_clk_div",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS1_CLKCTRL_OFFSET,
-			.rstctrl_offs = DRA7XX_RM_L3INIT_PCIESS_RSTCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L3INIT_PCIESS1_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* pcie2 */
-static struct omap_hwmod_rst_info dra7xx_pciess2_resets[] = {
-	{ .name = "pcie", .rst_shift = 1 },
-};
-
-/* pcie2 */
-static struct omap_hwmod dra7xx_pciess2_hwmod = {
-	.name		= "pcie2",
-	.class		= &dra7xx_pciess_hwmod_class,
-	.clkdm_name	= "pcie_clkdm",
-	.rst_lines	= dra7xx_pciess2_resets,
-	.rst_lines_cnt	= ARRAY_SIZE(dra7xx_pciess2_resets),
-	.main_clk	= "l4_root_clk_div",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS2_CLKCTRL_OFFSET,
-			.rstctrl_offs = DRA7XX_RM_L3INIT_PCIESS_RSTCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L3INIT_PCIESS2_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
 /*
  * 'qspi' class
  *
@@ -579,38 +501,6 @@  static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mpu = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l3_main_1 -> pciess1 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pciess1 = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_pciess1_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> pciess1 */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pciess1 = {
-	.master		= &dra7xx_l4_cfg_hwmod,
-	.slave		= &dra7xx_pciess1_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> pciess2 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pciess2 = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_pciess2_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> pciess2 */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pciess2 = {
-	.master		= &dra7xx_l4_cfg_hwmod,
-	.slave		= &dra7xx_pciess2_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l3_main_1 -> qspi */
 static struct omap_hwmod_ocp_if dra7xx_l3_main_1__qspi = {
 	.master		= &dra7xx_l3_main_1_hwmod,
@@ -675,10 +565,6 @@  static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 	&dra7xx_l3_main_1__bb2d,
 	&dra7xx_l4_wkup__ctrl_module_wkup,
 	&dra7xx_l4_cfg__mpu,
-	&dra7xx_l3_main_1__pciess1,
-	&dra7xx_l4_cfg__pciess1,
-	&dra7xx_l3_main_1__pciess2,
-	&dra7xx_l4_cfg__pciess2,
 	&dra7xx_l3_main_1__qspi,
 	&dra7xx_l4_cfg__sata,
 	&dra7xx_l3_main_1__vcp1,