@@ -20,7 +20,8 @@ &cpu0_opp_table {
* BeagleBone Blacks have PG 2.0 silicon which is guaranteed
* to support 1GHz OPP so enable it for PG 2.0 on this board.
*/
- oppnitro-1000000000 {
+ opp-1000000000 {
+ /* OPP Nitro */
opp-supported-hw = <0x06 0x0100>;
};
};
@@ -28,7 +28,8 @@ &cpu0_opp_table {
* the HW OPP table, the silicon looks like it is Revision 1.0 (ie the
* EFUSE_SMA register reads as all zeros).
*/
- oppnitro-1000000000 {
+ opp-1000000000 {
+ /* OPP Nitro */
opp-supported-hw = <0x06 0x0100>;
};
};
@@ -80,64 +80,74 @@ cpu0_opp_table: opp-table {
* because the can not be enabled simultaneously on a
* single SoC.
*/
- opp50-300000000 {
+ opp-50-300000000{
+ /* OPP50 */
opp-hz = /bits/ 64 <300000000>;
opp-microvolt = <950000 931000 969000>;
opp-supported-hw = <0x06 0x0010>;
opp-suspend;
};
- opp100-275000000 {
+ opp-100-275000000{
+ /* OPP100-1 */
opp-hz = /bits/ 64 <275000000>;
opp-microvolt = <1100000 1078000 1122000>;
opp-supported-hw = <0x01 0x00FF>;
opp-suspend;
};
- opp100-300000000 {
+ opp-100-300000000{
+ /* OPP100-2 */
opp-hz = /bits/ 64 <300000000>;
opp-microvolt = <1100000 1078000 1122000>;
opp-supported-hw = <0x06 0x0020>;
opp-suspend;
};
- opp100-500000000 {
+ opp-100-500000000{
+ /* OPP100-3 */
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <1100000 1078000 1122000>;
opp-supported-hw = <0x01 0xFFFF>;
};
- opp100-600000000 {
+ opp-100-600000000 {
+ /* OPP100-4 */
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <1100000 1078000 1122000>;
opp-supported-hw = <0x06 0x0040>;
};
- opp120-600000000 {
+ opp-120-600000000 {
+ /* OPP120-1 */
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <1200000 1176000 1224000>;
opp-supported-hw = <0x01 0xFFFF>;
};
- opp120-720000000 {
+ opp-120-720000000 {
+ /* OPP120-2 */
opp-hz = /bits/ 64 <720000000>;
opp-microvolt = <1200000 1176000 1224000>;
opp-supported-hw = <0x06 0x0080>;
};
- oppturbo-720000000 {
+ opp-720000000 {
+ /* OPP Turbo-1 */
opp-hz = /bits/ 64 <720000000>;
opp-microvolt = <1260000 1234800 1285200>;
opp-supported-hw = <0x01 0xFFFF>;
};
- oppturbo-800000000 {
+ opp-800000000 {
+ /* OPP Turbo-2 */
opp-hz = /bits/ 64 <800000000>;
opp-microvolt = <1260000 1234800 1285200>;
opp-supported-hw = <0x06 0x0100>;
};
- oppnitro-1000000000 {
+ opp-1000000000 {
+ /* OPP Nitro */
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <1325000 1298500 1351500>;
opp-supported-hw = <0x04 0x0200>;
@@ -34,14 +34,16 @@ cpu0_opp_table: opp-table {
* appear to operate at 300MHz as well. Since AM3517 only
* lists one operating voltage, it will remain fixed at 1.2V
*/
- opp50-300000000 {
+ opp-50-300000000 {
+ /* OPP50 */
opp-hz = /bits/ 64 <300000000>;
opp-microvolt = <1200000>;
opp-supported-hw = <0xffffffff 0xffffffff>;
opp-suspend;
};
- opp100-600000000 {
+ opp-100-600000000 {
+ /* OPP100 */
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <1200000>;
opp-supported-hw = <0xffffffff 0xffffffff>;
@@ -70,32 +70,37 @@ cpu0_opp_table: opp-table {
compatible = "operating-points-v2-ti-cpu";
syscon = <&scm_conf>;
- opp50-300000000 {
+ opp-50-300000000 {
+ /* OPP50 */
opp-hz = /bits/ 64 <300000000>;
opp-microvolt = <950000 931000 969000>;
opp-supported-hw = <0xFF 0x01>;
opp-suspend;
};
- opp100-600000000 {
+ opp-100-600000000 {
+ /* OPP100 */
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <1100000 1078000 1122000>;
opp-supported-hw = <0xFF 0x04>;
};
- opp120-720000000 {
+ opp-120-720000000 {
+ /* OPP120 */
opp-hz = /bits/ 64 <720000000>;
opp-microvolt = <1200000 1176000 1224000>;
opp-supported-hw = <0xFF 0x08>;
};
- oppturbo-800000000 {
+ opp-800000000{
+ /* OPP Turbo */
opp-hz = /bits/ 64 <800000000>;
opp-microvolt = <1260000 1234800 1285200>;
opp-supported-hw = <0xFF 0x10>;
};
- oppnitro-1000000000 {
+ opp-1000000000 {
+ /* OPP Nitro */
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <1325000 1298500 1351500>;
opp-supported-hw = <0xFF 0x20>;
@@ -527,11 +527,13 @@ &cpu0_opp_table {
* Supply voltage supervisor on board will not allow opp50 so
* disable it and set opp100 as suspend OPP.
*/
- opp50-300000000 {
+ opp-50-300000000 {
+ /* opp50-300000000 */
status = "disabled";
};
- opp100-600000000 {
+ opp-100-600000000 {
+ /* opp100-600000000 */
opp-suspend;
};
};
@@ -101,7 +101,8 @@ cpu0_opp_table: opp-table {
compatible = "operating-points-v2-ti-cpu";
syscon = <&scm_wkup>;
- opp_nom-1000000000 {
+ opp-1000000000 {
+ /* OPP NOM */
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <1060000 850000 1150000>,
<1060000 850000 1150000>;
@@ -109,7 +110,8 @@ opp_nom-1000000000 {
opp-suspend;
};
- opp_od-1176000000 {
+ opp-1176000000 {
+ /* OPP OD */
opp-hz = /bits/ 64 <1176000000>;
opp-microvolt = <1160000 885000 1160000>,
<1160000 885000 1160000>;
@@ -117,7 +119,8 @@ opp_od-1176000000 {
opp-supported-hw = <0xFF 0x02>;
};
- opp_high@1500000000 {
+ opp-1500000000 {
+ /* OPP High */
opp-hz = /bits/ 64 <1500000000>;
opp-microvolt = <1210000 950000 1250000>,
<1210000 950000 1250000>;
@@ -130,7 +130,8 @@ &mmc3 {
};
&cpu0_opp_table {
- opp_plus@1800000000 {
+ opp-1800000000 {
+ /* OPP Plus */
opp-hz = /bits/ 64 <1800000000>;
opp-microvolt = <1250000 950000 1250000>,
<1250000 950000 1250000>;
@@ -25,7 +25,7 @@ cpu0_opp_table: opp-table {
compatible = "operating-points-v2-ti-cpu";
syscon = <&scm_conf>;
- opp1-125000000 {
+ opp-125000000 {
opp-hz = /bits/ 64 <125000000>;
/*
* we currently only select the max voltage from table
@@ -40,32 +40,32 @@ opp1-125000000 {
opp-supported-hw = <0xffffffff 3>;
};
- opp2-250000000 {
+ opp-250000000 {
opp-hz = /bits/ 64 <250000000>;
opp-microvolt = <1075000 1075000 1075000>;
opp-supported-hw = <0xffffffff 3>;
opp-suspend;
};
- opp3-500000000 {
+ opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <1200000 1200000 1200000>;
opp-supported-hw = <0xffffffff 3>;
};
- opp4-550000000 {
+ opp-550000000 {
opp-hz = /bits/ 64 <550000000>;
opp-microvolt = <1275000 1275000 1275000>;
opp-supported-hw = <0xffffffff 3>;
};
- opp5-600000000 {
+ opp-600000000 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <1350000 1350000 1350000>;
opp-supported-hw = <0xffffffff 3>;
};
- opp6-720000000 {
+ opp-720000000 {
opp-hz = /bits/ 64 <720000000>;
opp-microvolt = <1350000 1350000 1350000>;
/* only high-speed grade omap3530 devices */
@@ -30,7 +30,8 @@ cpu0_opp_table: opp-table {
compatible = "operating-points-v2-ti-cpu";
syscon = <&scm_conf>;
- opp50-300000000 {
+ opp-50-300000000 {
+ /* OPP50 */
opp-hz = /bits/ 64 <300000000>;
/*
* we currently only select the max voltage from table
@@ -48,21 +49,24 @@ opp50-300000000 {
opp-suspend;
};
- opp100-600000000 {
+ opp-100-600000000 {
+ /* OPP100 */
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <1200000 1200000 1200000>,
<1200000 1200000 1200000>;
opp-supported-hw = <0xffffffff 3>;
};
- opp130-800000000 {
+ opp-130-800000000 {
+ /* OPP130 */
opp-hz = /bits/ 64 <800000000>;
opp-microvolt = <1325000 1325000 1325000>,
<1325000 1325000 1325000>;
opp-supported-hw = <0xffffffff 3>;
};
- opp1g-1000000000 {
+ opp-1000000000 {
+ /* OPP1G */
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <1375000 1375000 1375000>,
<1375000 1375000 1375000>;
Fix the opp table node names for opps to be compliant with bindings. Signed-off-by: Nishanth Menon <nm@ti.com> --- Should probably go via Tony's tree. .../arm/boot/dts/ti/omap/am335x-boneblack.dts | 3 +- .../dts/ti/omap/am335x-osd335x-common.dtsi | 3 +- arch/arm/boot/dts/ti/omap/am33xx.dtsi | 30 ++++++++++++------- arch/arm/boot/dts/ti/omap/am3517.dtsi | 6 ++-- arch/arm/boot/dts/ti/omap/am4372.dtsi | 15 ++++++---- arch/arm/boot/dts/ti/omap/am437x-idk-evm.dts | 6 ++-- arch/arm/boot/dts/ti/omap/dra7.dtsi | 9 ++++-- arch/arm/boot/dts/ti/omap/dra76x.dtsi | 3 +- arch/arm/boot/dts/ti/omap/omap34xx.dtsi | 12 ++++---- arch/arm/boot/dts/ti/omap/omap36xx.dtsi | 12 +++++--- 10 files changed, 64 insertions(+), 35 deletions(-)