From patchwork Wed Nov 8 14:33:50 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 742499 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id B16C3C04E83 for ; Wed, 8 Nov 2023 14:34:05 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233722AbjKHOeG (ORCPT ); Wed, 8 Nov 2023 09:34:06 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:41576 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232800AbjKHOeE (ORCPT ); Wed, 8 Nov 2023 09:34:04 -0500 Received: from mail-lf1-x133.google.com (mail-lf1-x133.google.com [IPv6:2a00:1450:4864:20::133]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 73A4F1FD5 for ; Wed, 8 Nov 2023 06:34:02 -0800 (PST) Received: by mail-lf1-x133.google.com with SMTP id 2adb3069b0e04-507b9408c61so9217960e87.0 for ; Wed, 08 Nov 2023 06:34:02 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1699454040; x=1700058840; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=M2oP0CAwM9fqA+0Dgb2EoSHPOfdHteJ6dO8seqEUSC8=; b=d++j0S0jzXloKSxy2FEsxBF4My9MQo4WQ9Fl+xWAViU0jlbibrE0gggRm6QjzfkbD3 SVPD76o/g7G1p7TkMowjGrl+ZC6N+bl43qNLikPc7NxpTwz30hemocVC/rgVyEAqE27g AHc0nr+3n40q0BZ74D+XmOI4HQji3QfZs2Ao3HoYSNpToDXhAc/SJfaP/lWFOEbT33d5 HxwvNqbyX8Q6drEIiMZSgHGzvLkgdrTsUnci2qGiHKB4QSGIU0wAcW7MGQbSdzDrhOlc efByyhP1AGOwb1T8ZVlbPBw8lKBA0KYr9yuR9Nt8qPi6CqaB/kSku0WLg7cB2pdaS6G9 O5NQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1699454041; x=1700058841; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=M2oP0CAwM9fqA+0Dgb2EoSHPOfdHteJ6dO8seqEUSC8=; b=SsKk6dY1ApxLSsjP42j+ZfG5hrnE5HiyvpbDAL6sPT++B5KraGe6T0ZYVRr7Vt88i4 voDmDgZYWKn75GRKhpcnksK4XSc69/rmofGpL5F+4JwrHtFyr9j2Q//IBKmX2eBdPdRa jB/Fw7nXNYvsHUSG1dFszsdOJsMveWSiceqBA+0IIgmJ2KKthKeBEssjmEJ5SVmZIj2A OmVm22tNKR1loDepbayr3OkrD6NQ2IKalz8XKXSohu0W9uqZOMCOwY2/3ttFzFnmds1Y r2LqY9tGsdh+7ALq2Ohhzu1NCg0aOURPib+nP3ENSHP++dnYwXKdLSV0oeDvu4U6/Wot trxw== X-Gm-Message-State: AOJu0YxkRx+048mW/PzuDOEqbCmACxBSa7QnkWZVVhxNh70W/MLzDamL nAhD+0E7RRHGxSJmp5cHAOVj5Q== X-Google-Smtp-Source: AGHT+IFeXnsMtyy2DU5D81yc59LJjJ/iZ2FiMOZRYehCSURuyYWkuW9aCmnGrNB56MFltC8JL+AJdA== X-Received: by 2002:a05:6512:2808:b0:509:45ed:1083 with SMTP id cf8-20020a056512280800b0050945ed1083mr2130529lfb.40.1699454040709; Wed, 08 Nov 2023 06:34:00 -0800 (PST) Received: from [127.0.1.1] ([85.235.12.238]) by smtp.gmail.com with ESMTPSA id q10-20020ac24a6a000000b00507a3b8b007sm686773lfp.110.2023.11.08.06.33.59 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 08 Nov 2023 06:34:00 -0800 (PST) From: Linus Walleij Date: Wed, 08 Nov 2023 15:33:50 +0100 Subject: [PATCH 2/6] dt-bindings: mtd: Rewrite gpio-control-nand in schema MIME-Version: 1.0 Message-Id: <20231108-fix-mips-nand-v1-2-5fc5586d04de@linaro.org> References: <20231108-fix-mips-nand-v1-0-5fc5586d04de@linaro.org> In-Reply-To: <20231108-fix-mips-nand-v1-0-5fc5586d04de@linaro.org> To: Aaro Koskinen , Janusz Krzysztofik , Tony Lindgren , Miquel Raynal , Richard Weinberger , Vignesh Raghavendra , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Thomas Bogendoerfer , Ben Dooks Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-mtd@lists.infradead.org, devicetree@vger.kernel.org, linux-mips@vger.kernel.org, Linus Walleij , Howard Harte X-Mailer: b4 0.12.4 Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org This creates a schema for GPIO controlled NAND. The txt schema was old and wrong. Mark the old way of passing GPIOs in a long array as deprecated and encourage per-pin GPIO assignments with the named nnn-gpios phandles. I was unable to re-use raw-nand-chip.yaml or even nand-chip.yaml: the reason is that they both assume that we have potentially several NAND chips with chip selects and thus enforce a node name "nand@0" etc, which doesn't quite work for this device. Since the GPIO controlled NAND is both a NAND controller and a NAND chip jitted together, I have to modify the mtd.yaml nodename requirement to include nand-controller@ as this is the nodename that this device should use. Deprecate the custom "band-width" property in favor of "nand-bus-width". Reported-by: Howard Harte Signed-off-by: Linus Walleij --- Check the required section especially. Since there is no hardware default for anything when using GPIOs for this, I think all these parameters are compulsory. --- .../devicetree/bindings/mtd/gpio-control-nand.txt | 47 ------ .../devicetree/bindings/mtd/gpio-control-nand.yaml | 168 +++++++++++++++++++++ Documentation/devicetree/bindings/mtd/mtd.yaml | 2 +- 3 files changed, 169 insertions(+), 48 deletions(-) diff --git a/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt b/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt deleted file mode 100644 index 486a17d533d7..000000000000 --- a/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt +++ /dev/null @@ -1,47 +0,0 @@ -GPIO assisted NAND flash - -The GPIO assisted NAND flash uses a memory mapped interface to -read/write the NAND commands and data and GPIO pins for the control -signals. - -Required properties: -- compatible : "gpio-control-nand" -- reg : should specify localbus chip select and size used for the chip. The - resource describes the data bus connected to the NAND flash and all accesses - are made in native endianness. -- #address-cells, #size-cells : Must be present if the device has sub-nodes - representing partitions. -- gpios : Specifies the GPIO pins to control the NAND device. The order of - GPIO references is: RDY, nCE, ALE, CLE, and nWP. nCE and nWP are optional. - -Optional properties: -- bank-width : Width (in bytes) of the device. If not present, the width - defaults to 1 byte. -- chip-delay : chip dependent delay for transferring data from array to - read registers (tR). If not present then a default of 20us is used. -- gpio-control-nand,io-sync-reg : A 64-bit physical address for a read - location used to guard against bus reordering with regards to accesses to - the GPIO's and the NAND flash data bus. If present, then after changing - GPIO state and before and after command byte writes, this register will be - read to ensure that the GPIO accesses have completed. - -The device tree may optionally contain sub-nodes describing partitions of the -address space. See partition.txt for more detail. - -Examples: - -gpio-nand@1,0 { - compatible = "gpio-control-nand"; - reg = <1 0x0000 0x2>; - #address-cells = <1>; - #size-cells = <1>; - gpios = <&banka 1 0>, /* RDY */ - <0>, /* nCE */ - <&banka 3 0>, /* ALE */ - <&banka 4 0>, /* CLE */ - <0>; /* nWP */ - - partition@0 { - ... - }; -}; diff --git a/Documentation/devicetree/bindings/mtd/gpio-control-nand.yaml b/Documentation/devicetree/bindings/mtd/gpio-control-nand.yaml new file mode 100644 index 000000000000..5b30ee7ad4a5 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/gpio-control-nand.yaml @@ -0,0 +1,168 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/gpio-control-nand.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NAND memory exclusively connected to GPIO lines + +maintainers: + - Linus Walleij + +description: | + It is possible to connect a NAND flash memory without any + dedicated NAND controller hardware, using just general purpose + I/O (GPIO) pins. This will not be fast, but it will work. + The address and data lines of the chip will still need to be + connected so that the contents of a NAND page can be + memory-mapped and accessed after the special lines are toggled + by GPIO. + +# The GPIO controlled NAND has wires going directly to one single +# NAND chip, so it is both a nand controller and a nand chip at +# the same time, but it does not have things such as chip select +# since the use is hammered down to one single chip only. +# There is no point for the chip itself to be a subnode of the +# controller so the raw NAND chip properties are added right into +# the controller node like this. + +allOf: + - $ref: mtd.yaml# + +properties: + $nodename: + pattern: "^(nand|nand-controller)@[a-f0-9]+$" + + compatible: + const: gpio-control-nand + + reg: + description: | + This should specify the address where the NAND page currently + accessed gets memory-mapped, and the size of the page. Usually + this will be the same as the page size of the NAND. + + label: true + + partitions: true + + nand-ecc-algo: true + + nand-ecc-step-size: true + + nand-ecc-strength: true + + nand-use-soft-ecc-engine: true + + gpio-control-nand,io-sync-reg: + description: | + A 64-bit physical address for a read location used to guard + against bus reordering with regards to accesses to the GPIOs and + the NAND flash data bus. If present, then after changing GPIO state + and before and after command byte writes, this register will be + read to ensure that the GPIO accesses have completed. + $ref: /schemas/types.yaml#/definitions/uint64 + + gpios: + description: + Legacy GPIO array for the NAND chip lines, order RDY, + NCE, ALE, CLE, NWP. + deprecated: true + maxItems: 5 + + rdy-gpios: + description: + GPIO for the NAND chip RDY line + maxItems: 1 + + ce-gpios: + description: + GPIO for the NAND chip CE chip enable line, usually + this is active low, so it should be tagged with the GPIO + flag GPIO_ACTIVE_LOW. + maxItems: 1 + + ale-gpios: + description: + GPIO for the NAND chip ALE line + maxItems: 1 + + cle-gpios: + description: + GPIO for the NAND chip CLE line + maxItems: 1 + + wp-gpios: + description: + GPIO for the NAND chip WP line, usually this is + active low, so it should be tagged with the GPIO + flag GPIO_ACTIVE_LOW. + maxItems: 1 + + bank-width: + description: + Width (in bytes) of the device. If not present, the + width defaults to 1 byte. This is deprecated, use + nand-bus-width instead. + deprecated: true + enum: [ 1, 2 ] + default: 1 + + nand-bus-width: + description: + Bus width to the NAND chip + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [8, 16] + default: 8 + + chip-delay: + description: + chip dependent delay for transferring data from array to + read registers (tR). If not present then a default of 20us + is used. + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - ale-gpios + - cle-gpios + +additionalProperties: false + +examples: + - | + #include + nand@20200000 { + compatible = "gpio-control-nand"; + /* 512 bytes memory window at 0x20200000 */ + reg = <0x20200000 0x200>; + rdy-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; + ce-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + ale-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; + cle-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + + label = "ixp400 NAND"; + + nand-use-soft-ecc-engine; + nand-ecc-algo = "bch"; + nand-ecc-step-size = <512>; + nand-ecc-strength = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + fs@0 { + label = "SysA Kernel"; + reg = <0x0 0x400000>; + }; + + fs@400000 { + label = "SysA Code"; + reg = <0x400000 0x7C00000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mtd/mtd.yaml b/Documentation/devicetree/bindings/mtd/mtd.yaml index f322290ee516..e6fd82cbc35d 100644 --- a/Documentation/devicetree/bindings/mtd/mtd.yaml +++ b/Documentation/devicetree/bindings/mtd/mtd.yaml @@ -12,7 +12,7 @@ maintainers: properties: $nodename: - pattern: "^(flash|.*sram|nand)(@.*)?$" + pattern: "^(flash|.*sram|nand|nand-controller)(@.*)?$" label: description: