| Message ID | e8350ea542c92465020f03481d76943168df2935.1621583562.git.geert+renesas@glider.be |
|---|---|
| State | New |
| Headers | show |
| Series | pcf857x: DTS fixes and DT binding to json-schema conversion | expand |
Hi Geert, Thank you for the patch. On Fri, May 21, 2021 at 09:54:06AM +0200, Geert Uytterhoeven wrote: > The dt-schema for nxp,pcf8575 expects GPIO hogs node names to end with a > 'hog' suffix. > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > --- > arch/arm/boot/dts/dra7-evm.dts | 2 +- > arch/arm/boot/dts/dra71-evm.dts | 2 +- > arch/arm/boot/dts/dra72-evm-common.dtsi | 2 +- > arch/arm/boot/dts/dra76-evm.dts | 2 +- > 4 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts > index 38530dbb89a00b7c..3dcb6e1f49bcf1f0 100644 > --- a/arch/arm/boot/dts/dra7-evm.dts > +++ b/arch/arm/boot/dts/dra7-evm.dts > @@ -366,7 +366,7 @@ pcf_hdmi: gpio@26 { > reg = <0x26>; > gpio-controller; > #gpio-cells = <2>; > - p1 { > + hdmi-audio-hog { > /* vin6_sel_s0: high: VIN6, low: audio */ > gpio-hog; > gpios = <1 GPIO_ACTIVE_HIGH>; > diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts > index 6d2cca6b44883e59..a64364443031525b 100644 > --- a/arch/arm/boot/dts/dra71-evm.dts > +++ b/arch/arm/boot/dts/dra71-evm.dts > @@ -187,7 +187,7 @@ &pcf_gpio_21 { > }; > > &pcf_hdmi { > - p0 { > + hdmi-i2c-disable-hog { > /* > * PM_OEn to High: Disable routing I2C3 to PM_I2C > * With this PM_SEL(p3) should not matter > diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi > index b65b2dd094d0ff57..f2384277d5dcdc5c 100644 > --- a/arch/arm/boot/dts/dra72-evm-common.dtsi > +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi > @@ -268,7 +268,7 @@ pcf_hdmi: pcf8575@26 { > */ > lines-initial-states = <0x0f2b>; > > - p1 { > + hdmi-audio-hog { > /* vin6_sel_s0: high: VIN6, low: audio */ > gpio-hog; > gpios = <1 GPIO_ACTIVE_HIGH>; > diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts > index 9bd01ae40b1d1fbb..df47ea59c9c404c2 100644 > --- a/arch/arm/boot/dts/dra76-evm.dts > +++ b/arch/arm/boot/dts/dra76-evm.dts > @@ -381,7 +381,7 @@ pcf_hdmi: pcf8575@26 { > reg = <0x26>; > gpio-controller; > #gpio-cells = <2>; > - p1 { > + hdmi-audio-hog { > /* vin6_sel_s0: high: VIN6, low: audio */ > gpio-hog; > gpios = <1 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 38530dbb89a00b7c..3dcb6e1f49bcf1f0 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -366,7 +366,7 @@ pcf_hdmi: gpio@26 { reg = <0x26>; gpio-controller; #gpio-cells = <2>; - p1 { + hdmi-audio-hog { /* vin6_sel_s0: high: VIN6, low: audio */ gpio-hog; gpios = <1 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts index 6d2cca6b44883e59..a64364443031525b 100644 --- a/arch/arm/boot/dts/dra71-evm.dts +++ b/arch/arm/boot/dts/dra71-evm.dts @@ -187,7 +187,7 @@ &pcf_gpio_21 { }; &pcf_hdmi { - p0 { + hdmi-i2c-disable-hog { /* * PM_OEn to High: Disable routing I2C3 to PM_I2C * With this PM_SEL(p3) should not matter diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi index b65b2dd094d0ff57..f2384277d5dcdc5c 100644 --- a/arch/arm/boot/dts/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -268,7 +268,7 @@ pcf_hdmi: pcf8575@26 { */ lines-initial-states = <0x0f2b>; - p1 { + hdmi-audio-hog { /* vin6_sel_s0: high: VIN6, low: audio */ gpio-hog; gpios = <1 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts index 9bd01ae40b1d1fbb..df47ea59c9c404c2 100644 --- a/arch/arm/boot/dts/dra76-evm.dts +++ b/arch/arm/boot/dts/dra76-evm.dts @@ -381,7 +381,7 @@ pcf_hdmi: pcf8575@26 { reg = <0x26>; gpio-controller; #gpio-cells = <2>; - p1 { + hdmi-audio-hog { /* vin6_sel_s0: high: VIN6, low: audio */ gpio-hog; gpios = <1 GPIO_ACTIVE_HIGH>;
The dt-schema for nxp,pcf8575 expects GPIO hogs node names to end with a 'hog' suffix. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- arch/arm/boot/dts/dra7-evm.dts | 2 +- arch/arm/boot/dts/dra71-evm.dts | 2 +- arch/arm/boot/dts/dra72-evm-common.dtsi | 2 +- arch/arm/boot/dts/dra76-evm.dts | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-)