mbox series

[v4,0/5] thermal: qcom-spmi-temp-alarm: Add support for new TEMP_ALARM subtypes

Message ID 20250528235026.4171109-1-anjelique.melendez@oss.qualcomm.com
Headers show
Series thermal: qcom-spmi-temp-alarm: Add support for new TEMP_ALARM subtypes | expand

Message

Anjelique Melendez May 28, 2025, 11:50 p.m. UTC 
Add support in the qcom-spmi-temp-alarm driver for the new PMIC
TEMP_ALARM peripheral subtypes: GEN2 rev 2 and LITE. The GEN2 rev 2
subtype provides greater flexibility in temperature threshold
specification by using an independent register value to configure
each of the three thresholds. The LITE subtype utilizes a simplified
set of control registers to configure two thresholds: warning and
shutdown. While at it refactor the qcom-spmi-temp-alarm driver to limit
code reuse and if/else statements when deciphering between TEMP_ALARM 
peripheral subtypes. 

Also add support to avoid a potential issue on certain versions of
the TEMP_ALARM GEN2 subtype when automatic stage 2 partial shutdown
is disabled.

This patch series is a continuation of older series from 7/2024
(https://lore.kernel.org/all/20240729231259.2122976-1-quic_amelende@quicinc.com/)
but current series has been reworked to address the change in thermal framework to
update .set_trip_temp() callback function variables
(https://lore.kernel.org/all/8392906.T7Z3S40VBb@rjwysocki.net/)

Changes since v3:
  - Updated order of logic and made dig revision a local variable 
    in patch 1/5
  - Updated Locking Logic in patches 3/5, 4/5, 5/5
  - link: https://lore.kernel.org/all/20250320202408.3940777-1-anjelique.melendez@oss.qualcomm.com/
Changes since v2:
  - Updated function name to include "gen1" in patch 2/5
  - Added Dmitry's reviewed-by tag in patch 2/5
  - link: https://lore.kernel.org/all/20250225192429.2328092-1-anjelique.melendez@oss.qualcomm.com/
Changes since v1:
  - Remove unnecessary moving of code
  - Added new v2 patch 3/5 add a preparation patch to v1 patch 2/5
  - Updated temp alarm data function names to be consistently named
  - link: https://lore.kernel.org/all/20250213210403.3396392-1-anjelique.melendez@oss.qualcomm.com/


Anjelique Melendez (4):
  thermal: qcom-spmi-temp-alarm: Add temp alarm data struct based on HW
    subtype
  thermal: qcom-spmi-temp-alarm: Prepare to support additional Temp
    Alarm subtypes
  thermal: qcom-spmi-temp-alarm: add support for GEN2 rev 2 PMIC
    peripherals
  thermal: qcom-spmi-temp-alarm: add support for LITE PMIC peripherals

David Collins (1):
  thermal: qcom-spmi-temp-alarm: enable stage 2 shutdown when required

 drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 522 ++++++++++++++++++--
 1 file changed, 472 insertions(+), 50 deletions(-)