diff --git a/Documentation/arm/cpu-domains.txt b/Documentation/arm/cpu-domains.txt
new file mode 100644
index 0000000..0ac0411
--- /dev/null
+++ b/Documentation/arm/cpu-domains.txt
@@ -0,0 +1,56 @@
+CPU Clusters and PM domain
+
+Newer CPUs are grouped in a SoC as clusters. A cluster in addition to the
+CPUs may have caches, GIC, VFP and architecture specific power controller to
+power the cluster. A cluster may also be nested in another cluster, the
+hierarchy of which is depicted in the device tree. CPUIdle frameworks enables
+the CPUs to determine the sleep time and enter low power state to save power
+during periods of idle. CPUs in a cluster may enter and exit idle state
+independently. During the time when all the CPUs are in idle state, the
+cluster can safely be in idle state as well. When the last of the CPUs is
+powered off as a result of idle, the cluster may also be powered down, but the
+domain must be powered on before the first of the CPUs in the cluster resumes
+execution.
+
+SoCs can power down the CPU and resume execution in a few uSecs and the domain
+that powers the CPU cluster also have comparable idle latencies. The CPU WFI
+signal in ARM CPUs is used as a hardware trigger for the cluster hardware to
+enter their idle state. The hardware can be programmed in advance to put the
+cluster in the desired idle state befitting the wakeup latency requested by
+the CPUs. When all the CPUs in a cluster have executed their WFI instruction,
+the state machine for the power controller may put the cluster components in
+their power down or idle state. Generally, the domains would power on with the
+hardware sensing the CPU's interrupts. The domains may however, need to be
+reconfigured by the CPU to remain active, until the last CPU is ready to enter
+idle again. To power down a cluster, it is generally required to power down
+all the CPUs. The caches would also need to be flushed. The hardware state of
+some of the components may need to be saved and restored when powered back on.
+SoC vendors may also have hardware specific configuration that must be done
+before the cluster can be powered off. When the cluster is powered off,
+notifications may be sent out to other SoC components to scale down or even
+power off their resources.
+
+Power management domains represent relationship of devices and their power
+controllers. They are represented in the DT as domain consumers and providers.
+A device may have a domain provider and a domain provider may support multiple
+domain consumers. Domains like clusters, may also be nested inside one
+another. A domain that has no active consumer, may be powered off and any
+resuming consumer would trigger the domain back to active. Parent domains may
+be powered off when the child domains are powered off. The CPU cluster can be
+fashioned as a PM domain. When the CPU devices are powered off, the PM domain
+may be powered off.
+
+The code in Generic PM domains handles the hierarchy of devices, domains and
+the reference counting of objects leading to last man down and first man up.
+The CPU domains core code defines PM domains for each CPU cluster and attaches
+the domains' CPU devices to as specified in the DT. Platform drivers may use
+the following API to register their CPU PM domains.
+
+of_init_cpu_pm_domain() -
+Provides a single step registration of the CPU PM domain and attach CPUs to
+the genpd. Platform drivers may additionally register callbacks for power_on
+and power_off operations.
+
+of_register_cpu_pm_domain() -
+Platforms that need to initialize their genpd, can use this method to
+initialize a CPU PD. The genpd and the callbacks are supplied through the @pd.
diff --git a/drivers/base/power/Makefile b/drivers/base/power/Makefile
index f94a6cc..db2787f 100644
--- a/drivers/base/power/Makefile
+++ b/drivers/base/power/Makefile
@@ -2,7 +2,7 @@ obj-$(CONFIG_PM)	+= sysfs.o generic_ops.o common.o qos.o runtime.o wakeirq.o
 obj-$(CONFIG_PM_SLEEP)	+= main.o wakeup.o
 obj-$(CONFIG_PM_TRACE_RTC)	+= trace.o
 obj-$(CONFIG_PM_OPP)	+= opp.o
-obj-$(CONFIG_PM_GENERIC_DOMAINS)	+=  domain.o domain_governor.o
+obj-$(CONFIG_PM_GENERIC_DOMAINS)	+=  domain.o domain_governor.o cpu-pd.o
 obj-$(CONFIG_HAVE_CLK)	+= clock_ops.o
 
 ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG
diff --git a/drivers/base/power/cpu-pd.c b/drivers/base/power/cpu-pd.c
new file mode 100644
index 0000000..5f30025
--- /dev/null
+++ b/drivers/base/power/cpu-pd.c
@@ -0,0 +1,206 @@
+/*
+ * CPU Generic PM Domain.
+ *
+ * Copyright (C) 2015 Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define DEBUG
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/cpu_pm.h>
+#include <linux/cpu-pd.h>
+#include <linux/device.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+
+#define NAME_MAX 36
+
+/* List of CPU PM domains we care about */
+static LIST_HEAD(of_cpu_pd_list);
+
+static inline
+struct cpu_pm_domain *to_cpu_pd(struct generic_pm_domain *d)
+{
+	struct cpu_pm_domain *pd;
+
+	list_for_each_entry(pd, &of_cpu_pd_list, link) {
+		if (pd->genpd == d)
+			return pd;
+	}
+
+	return NULL;
+}
+
+static int cpu_pd_power_off(struct generic_pm_domain *genpd)
+{
+	struct cpu_pm_domain *pd = to_cpu_pd(genpd);
+
+	if (pd->plat_ops.power_off)
+		pd->plat_ops.power_off(genpd);
+
+	/*
+	 * Notify CPU PM domain power down
+	 * TODO: Call the notificated directly from here.
+	 */
+	cpu_cluster_pm_enter();
+
+	return 0;
+}
+
+static int cpu_pd_power_on(struct generic_pm_domain *genpd)
+{
+	struct cpu_pm_domain *pd = to_cpu_pd(genpd);
+
+	if (pd->plat_ops.power_on)
+		pd->plat_ops.power_on(genpd);
+
+	/* Notify CPU PM domain power up */
+	cpu_cluster_pm_exit();
+
+	return 0;
+}
+
+static void run_cpu(void *unused)
+{
+	struct device *cpu_dev = get_cpu_device(smp_processor_id());
+
+	/* We are running, increment the usage count */
+	pm_runtime_get_noresume(cpu_dev);
+}
+
+static int of_pm_domain_attach_cpus(void)
+{
+	int cpuid, ret;
+
+	/* Find any CPU nodes with a phandle to this power domain */
+	for_each_possible_cpu(cpuid) {
+		struct device *cpu_dev;
+
+		cpu_dev = get_cpu_device(cpuid);
+		if (!cpu_dev) {
+			pr_warn("%s: Unable to get device for CPU%d\n",
+					__func__, cpuid);
+			return -ENODEV;
+		}
+
+		if (cpu_online(cpuid)) {
+			pm_runtime_set_active(cpu_dev);
+			/*
+			 * Execute the below on that 'cpu' to ensure that the
+			 * reference counting is correct. Its possible that
+			 * while this code is executing, the 'cpu' may be
+			 * powered down, but we may incorrectly increment the
+			 * usage. By executing the get_cpu on the 'cpu',
+			 * we can ensure that the 'cpu' and its usage count are
+			 * matched.
+			 */
+			smp_call_function_single(cpuid, run_cpu, NULL, true);
+		} else {
+			pm_runtime_set_suspended(cpu_dev);
+		}
+		pm_runtime_enable(cpu_dev);
+
+		/*
+		 * We attempt to attach the device to genpd again. We would
+		 * have failed in our earlier attempt to attach to the domain
+		 * provider as the CPU device would not have been IRQ safe,
+		 * while the domain is defined as IRQ safe. IRQ safe domains
+		 * can only have IRQ safe devices.
+		 */
+		ret = genpd_dev_pm_attach(cpu_dev);
+		if (ret) {
+			dev_warn(cpu_dev,
+				"%s: Unable to attach to power-domain: %d\n",
+				__func__, ret);
+			pm_runtime_disable(cpu_dev);
+		} else
+			dev_dbg(cpu_dev, "Attached to PM domain\n");
+	}
+
+	return 0;
+}
+
+/**
+ * of_register_cpu_pm_domain() - Register the CPU PM domain with GenPD
+ * framework
+ * @dn: PM domain provider device node
+ * @pd: The CPU PM domain that has been initialized
+ *
+ * This can be used by the platform code to setup the ->genpd of the @pd
+ * The platform can also set up its callbacks in the ->plat_ops.
+ */
+int of_register_cpu_pm_domain(struct device_node *dn,
+		struct cpu_pm_domain *pd)
+{
+
+	if (!pd || !pd->genpd)
+		return -EINVAL;
+
+	/*
+	 * The platform should not set up the genpd callbacks.
+	 * They should setup the pd->plat_ops instead.
+	 */
+	WARN_ON(pd->genpd->power_off);
+	WARN_ON(pd->genpd->power_on);
+
+	pd->genpd->power_off = cpu_pd_power_off;
+	pd->genpd->power_on = cpu_pd_power_on;
+	pd->genpd->flags |= GENPD_FLAG_IRQ_SAFE;
+
+	INIT_LIST_HEAD(&pd->link);
+	list_add(&pd->link, &of_cpu_pd_list);
+	pd->dn = dn;
+
+	/* Register the CPU genpd */
+	pr_debug("adding %s as generic power domain.\n", pd->genpd->name);
+	pm_genpd_init(pd->genpd, &simple_qos_governor, false);
+	of_genpd_add_provider_simple(dn, pd->genpd);
+
+	/* Attach the CPUs to the CPU PM domain */
+	return of_pm_domain_attach_cpus();
+}
+EXPORT_SYMBOL(of_register_cpu_pm_domain);
+
+/**
+ * of_init_cpu_pm_domain() - Initialize a CPU PM domain using the CPU pd
+ * provided
+ * @dn: PM domain provider device node
+ * @ops: CPU PM domain platform specific ops for callback
+ *
+ * This is a single step initialize the CPU PM domain with defaults,
+ * also register the genpd and attach CPUs to the genpd.
+ */
+int of_init_cpu_pm_domain(struct device_node *dn, struct cpu_pm_ops *ops)
+{
+	struct cpu_pm_domain *pd;
+
+	if (!of_device_is_available(dn))
+		return -ENODEV;
+
+	pd = kzalloc(sizeof(*pd), GFP_KERNEL);
+	if (!pd)
+		return -ENOMEM;
+
+	pd->genpd = kzalloc(sizeof(*(pd->genpd)), GFP_KERNEL);
+	if (!pd->genpd) {
+		kfree(pd);
+		return -ENOMEM;
+	}
+
+	if (ops) {
+		pd->plat_ops.power_off = ops->power_off;
+		pd->plat_ops.power_on = ops->power_on;
+	}
+
+	pd->genpd->name = kstrndup(dn->full_name, NAME_MAX, GFP_KERNEL);
+
+	return of_register_cpu_pm_domain(dn, pd);
+}
+EXPORT_SYMBOL(of_init_cpu_pm_domain);
diff --git a/include/linux/cpu-pd.h b/include/linux/cpu-pd.h
new file mode 100644
index 0000000..9ae6f5b
--- /dev/null
+++ b/include/linux/cpu-pd.h
@@ -0,0 +1,35 @@
+/*
+ * include/linux/cpu-pd.h
+ *
+ * Copyright (C) 2015 Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __CPU_PD_H__
+#define __CPU_PD_H__
+
+#include <linux/list.h>
+#include <linux/of.h>
+#include <linux/pm_domain.h>
+
+struct cpu_pm_ops {
+	int (*power_off)(struct generic_pm_domain *genpd);
+	int (*power_on)(struct generic_pm_domain *genpd);
+};
+
+struct cpu_pm_domain {
+	struct list_head link;
+	struct generic_pm_domain *genpd;
+	struct device_node *dn;
+	struct cpu_pm_ops plat_ops;
+};
+
+extern int of_register_cpu_pm_domain(struct device_node *dn,
+		struct cpu_pm_domain *pd);
+extern int of_init_cpu_pm_domain(struct device_node *dn,
+		struct cpu_pm_ops *ops);
+
+#endif /* __CPU_PD_H__ */
