@@ -202,66 +202,32 @@ static int sbs_read_string_data(struct i2c_client *client, u8 address,
char *values)
{
struct sbs_info *chip = i2c_get_clientdata(client);
- s32 ret = 0, block_length = 0;
- int retries_length, retries_block;
- u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1];
-
- retries_length = chip->i2c_retry_count;
- retries_block = chip->i2c_retry_count;
+ int retries = chip->i2c_retry_count;
+ s32 ret = 0;
- /* Adapter needs to support these two functions */
if (!i2c_check_functionality(client->adapter,
- I2C_FUNC_SMBUS_BYTE_DATA |
- I2C_FUNC_SMBUS_I2C_BLOCK)){
+ I2C_FUNC_SMBUS_READ_BLOCK_DATA)) {
return -ENODEV;
}
- /* Get the length of block data */
- while (retries_length > 0) {
- ret = i2c_smbus_read_byte_data(client, address);
- if (ret >= 0)
- break;
- retries_length--;
- }
-
- if (ret < 0) {
- dev_dbg(&client->dev,
- "%s: i2c read at address 0x%x failed\n",
- __func__, address);
- return ret;
- }
-
- /* block_length does not include NULL terminator */
- block_length = ret;
- if (block_length > I2C_SMBUS_BLOCK_MAX) {
- dev_err(&client->dev,
- "%s: Returned block_length is longer than 0x%x\n",
- __func__, I2C_SMBUS_BLOCK_MAX);
- return -EINVAL;
- }
-
/* Get the block data */
- while (retries_block > 0) {
- ret = i2c_smbus_read_i2c_block_data(
- client, address,
- block_length + 1, block_buffer);
+ while (retries > 0) {
+ ret = i2c_smbus_read_block_data(client, address, values);
if (ret >= 0)
break;
- retries_block--;
+ retries--;
}
if (ret < 0) {
- dev_dbg(&client->dev,
- "%s: i2c read at address 0x%x failed\n",
- __func__, address);
+ dev_dbg(&client->dev, "%s: failed to read block 0x%x: %d\n",
+ __func__, address, ret);
return ret;
}
- /* block_buffer[0] == block_length */
- memcpy(values, block_buffer + 1, block_length);
- values[block_length] = '\0';
+ /* add string termination */
+ values[ret] = '\0';
- return ret;
+ return 0;
}
static int sbs_write_word_data(struct i2c_client *client, u8 address,
@@ -465,14 +431,7 @@ static int sbs_get_battery_property(struct i2c_client *client,
static int sbs_get_battery_string_property(struct i2c_client *client,
int reg_offset, enum power_supply_property psp, char *val)
{
- s32 ret;
-
- ret = sbs_read_string_data(client, sbs_data[reg_offset].addr, val);
-
- if (ret < 0)
- return ret;
-
- return 0;
+ return sbs_read_string_data(client, sbs_data[reg_offset].addr, val);
}
static void sbs_unit_adjustment(struct i2c_client *client,
The SBS battery implements SMBus block reads. Currently the driver "emulates" this by doing an I2C byte read for the length followed by an I2C block read. The I2C subsystem actually provides a proper API for doing SMBus block reads, which can and should be used instead. The current implementation does not properly handle packet error checking (PEC). This change requires, that I2C bus drivers support I2C_M_RECV_LEN or directly provide the SMBus API to access device manufacturer and model name. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> --- drivers/power/supply/sbs-battery.c | 65 ++++++------------------------ 1 file changed, 12 insertions(+), 53 deletions(-)