diff --git a/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml b/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml
index aeff2bd774dd..729ae97b63d9 100644
--- a/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml
+++ b/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml
@@ -18,6 +18,9 @@ description: |
   sun50i-cpufreq-nvmem driver reads the efuse value from the SoC to
   provide the OPP framework with required information.
 
+allOf:
+  - $ref: opp-v2-base.yaml#
+
 properties:
   compatible:
     const: allwinner,sun50i-h6-operating-points
@@ -43,6 +46,7 @@ patternProperties:
 
     properties:
       opp-hz: true
+      clock-latency-ns: true
 
     patternProperties:
       "opp-microvolt-.*": true
diff --git a/Documentation/devicetree/bindings/opp/opp-v1.yaml b/Documentation/devicetree/bindings/opp/opp-v1.yaml
new file mode 100644
index 000000000000..d585d536a3fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/opp/opp-v1.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/opp/opp-v1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic OPP (Operating Performance Points) v1 Bindings
+
+maintainers:
+  - Viresh Kumar <viresh.kumar@linaro.org>
+
+description: |+
+  Devices work at voltage-current-frequency combinations and some implementations
+  have the liberty of choosing these. These combinations are called Operating
+  Performance Points aka OPPs. This document defines bindings for these OPPs
+  applicable across wide range of devices. For illustration purpose, this document
+  uses CPU as a device.
+
+  This binding only supports voltage-frequency pairs.
+
+select: true
+
+properties:
+  operating-points:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description: Frequency in kHz
+        - description: Voltage for OPP in uV
+
+
+additionalProperties: true
+examples:
+  - |
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "arm,cortex-a9";
+            device_type = "cpu";
+            reg = <0>;
+            next-level-cache = <&L2>;
+            operating-points =
+                /* kHz    uV */
+                <792000 1100000>,
+                <396000 950000>,
+                <198000 850000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml
new file mode 100644
index 000000000000..ae3ae4d39843
--- /dev/null
+++ b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml
@@ -0,0 +1,214 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/opp/opp-v2-base.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic OPP (Operating Performance Points) Common Binding
+
+maintainers:
+  - Viresh Kumar <viresh.kumar@linaro.org>
+
+description: |
+  Devices work at voltage-current-frequency combinations and some implementations
+  have the liberty of choosing these. These combinations are called Operating
+  Performance Points aka OPPs. This document defines bindings for these OPPs
+  applicable across wide range of devices. For illustration purpose, this document
+  uses CPU as a device.
+
+  This describes the OPPs belonging to a device.
+
+select: false
+
+properties:
+  $nodename:
+    pattern: '^opp-table(-[a-z0-9]+)?$'
+
+  opp-shared:
+    description:
+      Indicates that device nodes using this OPP Table Node's phandle switch
+      their DVFS state together, i.e. they share clock/voltage/current lines.
+      Missing property means devices have independent clock/voltage/current
+      lines, but they share OPP tables.
+    type: boolean
+
+patternProperties:
+  '^opp-?[0-9]+$':
+    type: object
+    description:
+      One or more OPP nodes describing voltage-current-frequency combinations.
+      Their name isn't significant but their phandle can be used to reference an
+      OPP. These are mandatory except for the case where the OPP table is
+      present only to indicate dependency between devices using the opp-shared
+      property.
+
+    properties:
+      opp-hz:
+        description:
+          Frequency in Hz, expressed as a 64-bit big-endian integer. This is a
+          required property for all device nodes, unless another "required"
+          property to uniquely identify the OPP nodes exists. Devices like power
+          domains must have another (implementation dependent) property.
+
+      opp-microvolt:
+        description: |
+          Voltage for the OPP
+
+          A single regulator's voltage is specified with an array of size one or three.
+          Single entry is for target voltage and three entries are for <target min max>
+          voltages.
+
+          Entries for multiple regulators shall be provided in the same field separated
+          by angular brackets <>. The OPP binding doesn't provide any provisions to
+          relate the values to their power supplies or the order in which the supplies
+          need to be configured and that is left for the implementation specific
+          binding.
+
+          Entries for all regulators shall be of the same size, i.e. either all use a
+          single value or triplets.
+        minItems: 1
+        maxItems: 8   # Should be enough regulators
+        items:
+          minItems: 1
+          maxItems: 3
+
+      opp-microamp:
+        description: |
+          The maximum current drawn by the device in microamperes considering
+          system specific parameters (such as transients, process, aging,
+          maximum operating temperature range etc.) as necessary. This may be
+          used to set the most efficient regulator operating mode.
+
+          Should only be set if opp-microvolt or opp-microvolt-<name> is set for
+          the OPP.
+
+          Entries for multiple regulators shall be provided in the same field
+          separated by angular brackets <>. If current values aren't required
+          for a regulator, then it shall be filled with 0. If current values
+          aren't required for any of the regulators, then this field is not
+          required. The OPP binding doesn't provide any provisions to relate the
+          values to their power supplies or the order in which the supplies need
+          to be configured and that is left for the implementation specific
+          binding.
+        minItems: 1
+        maxItems: 8   # Should be enough regulators
+
+      opp-level:
+        description:
+          A value representing the performance level of the device.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      opp-peak-kBps:
+        description:
+          Peak bandwidth in kilobytes per second, expressed as an array of
+          32-bit big-endian integers. Each element of the array represents the
+          peak bandwidth value of each interconnect path. The number of elements
+          should match the number of interconnect paths.
+        minItems: 1
+        maxItems: 32  # Should be enough
+
+      opp-avg-kBps:
+        description:
+          Average bandwidth in kilobytes per second, expressed as an array
+          of 32-bit big-endian integers. Each element of the array represents the
+          average bandwidth value of each interconnect path. The number of elements
+          should match the number of interconnect paths. This property is only
+          meaningful in OPP tables where opp-peak-kBps is present.
+        minItems: 1
+        maxItems: 32  # Should be enough
+
+      clock-latency-ns:
+        description:
+          Specifies the maximum possible transition latency (in nanoseconds) for
+          switching to this OPP from any other OPP.
+
+      turbo-mode:
+        description:
+          Marks the OPP to be used only for turbo modes. Turbo mode is available
+          on some platforms, where the device can run over its operating
+          frequency for a short duration of time limited by the device's power,
+          current and thermal limits.
+        type: boolean
+
+      opp-suspend:
+        description:
+          Marks the OPP to be used during device suspend. If multiple OPPs in
+          the table have this, the OPP with highest opp-hz will be used.
+        type: boolean
+
+      opp-supported-hw:
+        description: |
+          This property allows a platform to enable only a subset of the OPPs
+          from the larger set present in the OPP table, based on the current
+          version of the hardware (already known to the operating system).
+
+          Each block present in the array of blocks in this property, represents
+          a sub-group of hardware versions supported by the OPP. i.e. <sub-group
+          A>, <sub-group B>, etc. The OPP will be enabled if _any_ of these
+          sub-groups match the hardware's version.
+
+          Each sub-group is a platform defined array representing the hierarchy
+          of hardware versions supported by the platform. For a platform with
+          three hierarchical levels of version (X.Y.Z), this field shall look
+          like
+
+          opp-supported-hw = <X1 Y1 Z1>, <X2 Y2 Z2>, <X3 Y3 Z3>.
+
+          Each level (eg. X1) in version hierarchy is represented by a 32 bit
+          value, one bit per version and so there can be maximum 32 versions per
+          level. Logical AND (&) operation is performed for each level with the
+          hardware's level version and a non-zero output for _all_ the levels in
+          a sub-group means the OPP is supported by hardware. A value of
+          0xFFFFFFFF for each level in the sub-group will enable the OPP for all
+          versions for the hardware.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        maxItems: 32
+        items:
+          minItems: 1
+          maxItems: 4
+
+      required-opps:
+        description:
+          This contains phandle to an OPP node in another device's OPP table. It
+          may contain an array of phandles, where each phandle points to an OPP
+          of a different device. It should not contain multiple phandles to the
+          OPP nodes in the same OPP table. This specifies the minimum required
+          OPP of the device(s), whose OPP's phandle is present in this property,
+          for the functioning of the current device at the current OPP (where
+          this property is present).
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+
+    patternProperties:
+      '^opp-microvolt-':
+        description:
+          Named opp-microvolt property. This is exactly similar to the above
+          opp-microvolt property, but allows multiple voltage ranges to be
+          provided for the same OPP. At runtime, the platform can pick a <name>
+          and matching opp-microvolt-<name> property will be enabled for all
+          OPPs. If the platform doesn't pick a specific <name> or the <name>
+          doesn't match with any opp-microvolt-<name> properties, then
+          opp-microvolt property shall be used, if present.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        minItems: 1
+        maxItems: 8   # Should be enough regulators
+        items:
+          minItems: 1
+          maxItems: 3
+
+      '^opp-microamp-':
+        description:
+          Named opp-microamp property. Similar to opp-microvolt-<name> property,
+          but for microamp instead.
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 8   # Should be enough regulators
+
+    dependencies:
+      opp-avg-kBps: [ opp-peak-kBps ]
+
+required:
+  - compatible
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/opp/opp-v2.yaml b/Documentation/devicetree/bindings/opp/opp-v2.yaml
new file mode 100644
index 000000000000..609f68db9610
--- /dev/null
+++ b/Documentation/devicetree/bindings/opp/opp-v2.yaml
@@ -0,0 +1,475 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/opp/opp-v2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic OPP (Operating Performance Points) Bindings
+
+maintainers:
+  - Viresh Kumar <viresh.kumar@linaro.org>
+
+allOf:
+  - $ref: opp-v2-base.yaml#
+
+properties:
+  compatible:
+    const: operating-points-v2
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    /*
+     * Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states
+     * together.
+     */
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "arm,cortex-a9";
+            device_type = "cpu";
+            reg = <0>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 0>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply0>;
+            operating-points-v2 = <&cpu0_opp_table0>;
+        };
+
+        cpu@1 {
+            compatible = "arm,cortex-a9";
+            device_type = "cpu";
+            reg = <1>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 0>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply0>;
+            operating-points-v2 = <&cpu0_opp_table0>;
+        };
+    };
+
+    cpu0_opp_table0: opp-table {
+        compatible = "operating-points-v2";
+        opp-shared;
+
+        opp-1000000000 {
+            opp-hz = /bits/ 64 <1000000000>;
+            opp-microvolt = <975000 970000 985000>;
+            opp-microamp = <70000>;
+            clock-latency-ns = <300000>;
+            opp-suspend;
+        };
+        opp-1100000000 {
+            opp-hz = /bits/ 64 <1100000000>;
+            opp-microvolt = <1000000 980000 1010000>;
+            opp-microamp = <80000>;
+            clock-latency-ns = <310000>;
+        };
+        opp-1200000000 {
+            opp-hz = /bits/ 64 <1200000000>;
+            opp-microvolt = <1025000>;
+            clock-latency-ns = <290000>;
+            turbo-mode;
+        };
+    };
+
+  - |
+    /*
+     * Example 2: Single cluster, Quad-core Qualcom-krait, switches DVFS states
+     * independently.
+     */
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "qcom,krait";
+            device_type = "cpu";
+            reg = <0>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 0>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply0>;
+            operating-points-v2 = <&cpu_opp_table>;
+        };
+
+        cpu@1 {
+            compatible = "qcom,krait";
+            device_type = "cpu";
+            reg = <1>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 1>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply1>;
+            operating-points-v2 = <&cpu_opp_table>;
+        };
+
+        cpu@2 {
+            compatible = "qcom,krait";
+            device_type = "cpu";
+            reg = <2>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 2>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply2>;
+            operating-points-v2 = <&cpu_opp_table>;
+        };
+
+        cpu@3 {
+            compatible = "qcom,krait";
+            device_type = "cpu";
+            reg = <3>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 3>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply3>;
+            operating-points-v2 = <&cpu_opp_table>;
+        };
+    };
+
+    cpu_opp_table: opp-table {
+        compatible = "operating-points-v2";
+
+        /*
+         * Missing opp-shared property means CPUs switch DVFS states
+         * independently.
+         */
+
+        opp-1000000000 {
+            opp-hz = /bits/ 64 <1000000000>;
+            opp-microvolt = <975000 970000 985000>;
+            opp-microamp = <70000>;
+            clock-latency-ns = <300000>;
+            opp-suspend;
+        };
+        opp-1100000000 {
+            opp-hz = /bits/ 64 <1100000000>;
+            opp-microvolt = <1000000 980000 1010000>;
+            opp-microamp = <80000>;
+            clock-latency-ns = <310000>;
+        };
+        opp-1200000000 {
+            opp-hz = /bits/ 64 <1200000000>;
+            opp-microvolt = <1025000>;
+            opp-microamp = <90000>;
+            lock-latency-ns = <290000>;
+            turbo-mode;
+        };
+    };
+
+  - |
+    /*
+     * Example 3: Dual-cluster, Dual-core per cluster. CPUs within a cluster switch
+     * DVFS state together.
+     */
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "arm,cortex-a7";
+            device_type = "cpu";
+            reg = <0>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 0>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply0>;
+            operating-points-v2 = <&cluster0_opp>;
+        };
+
+        cpu@1 {
+            compatible = "arm,cortex-a7";
+            device_type = "cpu";
+            reg = <1>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 0>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply0>;
+            operating-points-v2 = <&cluster0_opp>;
+        };
+
+        cpu@100 {
+            compatible = "arm,cortex-a15";
+            device_type = "cpu";
+            reg = <100>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 1>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply1>;
+            operating-points-v2 = <&cluster1_opp>;
+        };
+
+        cpu@101 {
+            compatible = "arm,cortex-a15";
+            device_type = "cpu";
+            reg = <101>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 1>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply1>;
+            operating-points-v2 = <&cluster1_opp>;
+        };
+    };
+
+    cluster0_opp: opp-table-0 {
+        compatible = "operating-points-v2";
+        opp-shared;
+
+        opp-1000000000 {
+            opp-hz = /bits/ 64 <1000000000>;
+            opp-microvolt = <975000 970000 985000>;
+            opp-microamp = <70000>;
+            clock-latency-ns = <300000>;
+            opp-suspend;
+        };
+        opp-1100000000 {
+            opp-hz = /bits/ 64 <1100000000>;
+            opp-microvolt = <1000000 980000 1010000>;
+            opp-microamp = <80000>;
+            clock-latency-ns = <310000>;
+        };
+        opp-1200000000 {
+            opp-hz = /bits/ 64 <1200000000>;
+            opp-microvolt = <1025000>;
+            opp-microamp = <90000>;
+            clock-latency-ns = <290000>;
+            turbo-mode;
+        };
+    };
+
+    cluster1_opp: opp-table-1 {
+        compatible = "operating-points-v2";
+        opp-shared;
+
+        opp-1300000000 {
+            opp-hz = /bits/ 64 <1300000000>;
+            opp-microvolt = <1050000 1045000 1055000>;
+            opp-microamp = <95000>;
+            clock-latency-ns = <400000>;
+            opp-suspend;
+        };
+        opp-1400000000 {
+            opp-hz = /bits/ 64 <1400000000>;
+            opp-microvolt = <1075000>;
+            opp-microamp = <100000>;
+            clock-latency-ns = <400000>;
+        };
+        opp-1500000000 {
+            opp-hz = /bits/ 64 <1500000000>;
+            opp-microvolt = <1100000 1010000 1110000>;
+            opp-microamp = <95000>;
+            clock-latency-ns = <400000>;
+            turbo-mode;
+        };
+    };
+
+  - |
+    /* Example 4: Handling multiple regulators */
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "vendor,cpu-type";
+            device_type = "cpu";
+            reg = <0>;
+
+            vcc0-supply = <&cpu_supply0>;
+            vcc1-supply = <&cpu_supply1>;
+            vcc2-supply = <&cpu_supply2>;
+            operating-points-v2 = <&cpu0_opp_table4>;
+        };
+    };
+
+    cpu0_opp_table4: opp-table-0 {
+        compatible = "operating-points-v2";
+        opp-shared;
+
+        opp-1000000000 {
+            opp-hz = /bits/ 64 <1000000000>;
+            opp-microvolt = <970000>, /* Supply 0 */
+                            <960000>, /* Supply 1 */
+                            <960000>; /* Supply 2 */
+            opp-microamp =  <70000>,  /* Supply 0 */
+                            <70000>,  /* Supply 1 */
+                            <70000>;  /* Supply 2 */
+            clock-latency-ns = <300000>;
+        };
+
+        /* OR */
+
+        opp-1000000001 {
+            opp-hz = /bits/ 64 <1000000001>;
+            opp-microvolt = <975000 970000 985000>, /* Supply 0 */
+                            <965000 960000 975000>, /* Supply 1 */
+                            <965000 960000 975000>; /* Supply 2 */
+            opp-microamp =  <70000>,    /* Supply 0 */
+                <70000>,    /* Supply 1 */
+                <70000>;    /* Supply 2 */
+            clock-latency-ns = <300000>;
+        };
+
+        /* OR */
+
+        opp-1000000002 {
+            opp-hz = /bits/ 64 <1000000002>;
+            opp-microvolt = <975000 970000 985000>, /* Supply 0 */
+                <965000 960000 975000>, /* Supply 1 */
+                <965000 960000 975000>; /* Supply 2 */
+            opp-microamp =  <70000>,    /* Supply 0 */
+                <0>,      /* Supply 1 doesn't need this */
+                <70000>;    /* Supply 2 */
+            clock-latency-ns = <300000>;
+        };
+    };
+
+  - |
+    /*
+     * Example 5: opp-supported-hw
+     * (example: three level hierarchy of versions: cuts, substrate and process)
+     */
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "arm,cortex-a7";
+            device_type = "cpu";
+            reg = <0>;
+            cpu-supply = <&cpu_supply>;
+            operating-points-v2 = <&cpu0_opp_table_slow>;
+        };
+    };
+
+    cpu0_opp_table_slow: opp-table {
+        compatible = "operating-points-v2";
+        opp-shared;
+
+        opp-600000000 {
+            /*
+             * Supports all substrate and process versions for 0xF
+             * cuts, i.e. only first four cuts.
+             */
+            opp-supported-hw = <0xF 0xFFFFFFFF 0xFFFFFFFF>;
+            opp-hz = /bits/ 64 <600000000>;
+        };
+
+        opp-800000000 {
+            /*
+             * Supports:
+             * - cuts: only one, 6th cut (represented by 6th bit).
+             * - substrate: supports 16 different substrate versions
+             * - process: supports 9 different process versions
+             */
+            opp-supported-hw = <0x20 0xff0000ff 0x0000f4f0>;
+            opp-hz = /bits/ 64 <800000000>;
+        };
+
+        opp-900000000 {
+            /*
+             * Supports:
+             * - All cuts and substrate where process version is 0x2.
+             * - All cuts and process where substrate version is 0x2.
+             */
+            opp-supported-hw = <0xFFFFFFFF 0xFFFFFFFF 0x02>,
+                               <0xFFFFFFFF 0x01 0xFFFFFFFF>;
+            opp-hz = /bits/ 64 <900000000>;
+        };
+    };
+
+  - |
+    /*
+     * Example 6: opp-microvolt-<name>, opp-microamp-<name>:
+     * (example: device with two possible microvolt ranges: slow and fast)
+     */
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "arm,cortex-a7";
+            device_type = "cpu";
+            reg = <0>;
+            operating-points-v2 = <&cpu0_opp_table6>;
+        };
+    };
+
+    cpu0_opp_table6: opp-table-0 {
+        compatible = "operating-points-v2";
+        opp-shared;
+
+        opp-1000000000 {
+            opp-hz = /bits/ 64 <1000000000>;
+            opp-microvolt-slow = <915000 900000 925000>;
+            opp-microvolt-fast = <975000 970000 985000>;
+            opp-microamp-slow =  <70000>;
+            opp-microamp-fast =  <71000>;
+        };
+
+        opp-1200000000 {
+            opp-hz = /bits/ 64 <1200000000>;
+            opp-microvolt-slow = <915000 900000 925000>, /* Supply vcc0 */
+                                 <925000 910000 935000>; /* Supply vcc1 */
+            opp-microvolt-fast = <975000 970000 985000>, /* Supply vcc0 */
+                                 <965000 960000 975000>; /* Supply vcc1 */
+            opp-microamp =  <70000>; /* Will be used for both slow/fast */
+        };
+    };
+
+  - |
+    /*
+     * Example 7: Single cluster Quad-core ARM cortex A53, OPP points from firmware,
+     * distinct clock controls but two sets of clock/voltage/current lines.
+     */
+    cpus {
+        #address-cells = <2>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "arm,cortex-a53";
+            device_type = "cpu";
+            reg = <0x0 0x100>;
+            next-level-cache = <&A53_L2>;
+            clocks = <&dvfs_controller 0>;
+            operating-points-v2 = <&cpu_opp0_table>;
+        };
+        cpu@1 {
+            compatible = "arm,cortex-a53";
+            device_type = "cpu";
+            reg = <0x0 0x101>;
+            next-level-cache = <&A53_L2>;
+            clocks = <&dvfs_controller 1>;
+            operating-points-v2 = <&cpu_opp0_table>;
+        };
+        cpu@2 {
+            compatible = "arm,cortex-a53";
+            device_type = "cpu";
+            reg = <0x0 0x102>;
+            next-level-cache = <&A53_L2>;
+            clocks = <&dvfs_controller 2>;
+            operating-points-v2 = <&cpu_opp1_table>;
+        };
+        cpu@3 {
+            compatible = "arm,cortex-a53";
+            device_type = "cpu";
+            reg = <0x0 0x103>;
+            next-level-cache = <&A53_L2>;
+            clocks = <&dvfs_controller 3>;
+            operating-points-v2 = <&cpu_opp1_table>;
+        };
+
+    };
+
+    cpu_opp0_table: opp-table-0 {
+        compatible = "operating-points-v2";
+        opp-shared;
+    };
+
+    cpu_opp1_table: opp-table-1 {
+        compatible = "operating-points-v2";
+        opp-shared;
+    };
+...
diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt
deleted file mode 100644
index 08b3da4736cf..000000000000
--- a/Documentation/devicetree/bindings/opp/opp.txt
+++ /dev/null
@@ -1,622 +0,0 @@
-Generic OPP (Operating Performance Points) Bindings
-----------------------------------------------------
-
-Devices work at voltage-current-frequency combinations and some implementations
-have the liberty of choosing these. These combinations are called Operating
-Performance Points aka OPPs. This document defines bindings for these OPPs
-applicable across wide range of devices. For illustration purpose, this document
-uses CPU as a device.
-
-This document contain multiple versions of OPP binding and only one of them
-should be used per device.
-
-Binding 1: operating-points
-============================
-
-This binding only supports voltage-frequency pairs.
-
-Properties:
-- operating-points: An array of 2-tuples items, and each item consists
-  of frequency and voltage like <freq-kHz vol-uV>.
-	freq: clock frequency in kHz
-	vol: voltage in microvolt
-
-Examples:
-
-cpu@0 {
-	compatible = "arm,cortex-a9";
-	reg = <0>;
-	next-level-cache = <&L2>;
-	operating-points = <
-		/* kHz    uV */
-		792000  1100000
-		396000  950000
-		198000  850000
-	>;
-};
-
-
-Binding 2: operating-points-v2
-============================
-
-* Property: operating-points-v2
-
-Devices supporting OPPs must set their "operating-points-v2" property with
-phandle to a OPP table in their DT node. The OPP core will use this phandle to
-find the operating points for the device.
-
-This can contain more than one phandle for power domain providers that provide
-multiple power domains. That is, one phandle for each power domain. If only one
-phandle is available, then the same OPP table will be used for all power domains
-provided by the power domain provider.
-
-If required, this can be extended for SoC vendor specific bindings. Such bindings
-should be documented as Documentation/devicetree/bindings/power/<vendor>-opp.txt
-and should have a compatible description like: "operating-points-v2-<vendor>".
-
-* OPP Table Node
-
-This describes the OPPs belonging to a device. This node can have following
-properties:
-
-Required properties:
-- compatible: Allow OPPs to express their compatibility. It should be:
-  "operating-points-v2".
-
-- OPP nodes: One or more OPP nodes describing voltage-current-frequency
-  combinations. Their name isn't significant but their phandle can be used to
-  reference an OPP. These are mandatory except for the case where the OPP table
-  is present only to indicate dependency between devices using the opp-shared
-  property.
-
-Optional properties:
-- opp-shared: Indicates that device nodes using this OPP Table Node's phandle
-  switch their DVFS state together, i.e. they share clock/voltage/current lines.
-  Missing property means devices have independent clock/voltage/current lines,
-  but they share OPP tables.
-
-- status: Marks the OPP table enabled/disabled.
-
-
-* OPP Node
-
-This defines voltage-current-frequency combinations along with other related
-properties.
-
-Required properties:
-- opp-hz: Frequency in Hz, expressed as a 64-bit big-endian integer. This is a
-  required property for all device nodes, unless another "required" property to
-  uniquely identify the OPP nodes exists. Devices like power domains must have
-  another (implementation dependent) property.
-
-- opp-peak-kBps: Peak bandwidth in kilobytes per second, expressed as an array
-  of 32-bit big-endian integers. Each element of the array represents the
-  peak bandwidth value of each interconnect path. The number of elements should
-  match the number of interconnect paths.
-
-Optional properties:
-- opp-microvolt: voltage in micro Volts.
-
-  A single regulator's voltage is specified with an array of size one or three.
-  Single entry is for target voltage and three entries are for <target min max>
-  voltages.
-
-  Entries for multiple regulators shall be provided in the same field separated
-  by angular brackets <>. The OPP binding doesn't provide any provisions to
-  relate the values to their power supplies or the order in which the supplies
-  need to be configured and that is left for the implementation specific
-  binding.
-
-  Entries for all regulators shall be of the same size, i.e. either all use a
-  single value or triplets.
-
-- opp-microvolt-<name>: Named opp-microvolt property. This is exactly similar to
-  the above opp-microvolt property, but allows multiple voltage ranges to be
-  provided for the same OPP. At runtime, the platform can pick a <name> and
-  matching opp-microvolt-<name> property will be enabled for all OPPs. If the
-  platform doesn't pick a specific <name> or the <name> doesn't match with any
-  opp-microvolt-<name> properties, then opp-microvolt property shall be used, if
-  present.
-
-- opp-microamp: The maximum current drawn by the device in microamperes
-  considering system specific parameters (such as transients, process, aging,
-  maximum operating temperature range etc.) as necessary. This may be used to
-  set the most efficient regulator operating mode.
-
-  Should only be set if opp-microvolt is set for the OPP.
-
-  Entries for multiple regulators shall be provided in the same field separated
-  by angular brackets <>. If current values aren't required for a regulator,
-  then it shall be filled with 0. If current values aren't required for any of
-  the regulators, then this field is not required. The OPP binding doesn't
-  provide any provisions to relate the values to their power supplies or the
-  order in which the supplies need to be configured and that is left for the
-  implementation specific binding.
-
-- opp-microamp-<name>: Named opp-microamp property. Similar to
-  opp-microvolt-<name> property, but for microamp instead.
-
-- opp-level: A value representing the performance level of the device,
-  expressed as a 32-bit integer.
-
-- opp-avg-kBps: Average bandwidth in kilobytes per second, expressed as an array
-  of 32-bit big-endian integers. Each element of the array represents the
-  average bandwidth value of each interconnect path. The number of elements
-  should match the number of interconnect paths. This property is only
-  meaningful in OPP tables where opp-peak-kBps is present.
-
-- clock-latency-ns: Specifies the maximum possible transition latency (in
-  nanoseconds) for switching to this OPP from any other OPP.
-
-- turbo-mode: Marks the OPP to be used only for turbo modes. Turbo mode is
-  available on some platforms, where the device can run over its operating
-  frequency for a short duration of time limited by the device's power, current
-  and thermal limits.
-
-- opp-suspend: Marks the OPP to be used during device suspend. If multiple OPPs
-  in the table have this, the OPP with highest opp-hz will be used.
-
-- opp-supported-hw: This property allows a platform to enable only a subset of
-  the OPPs from the larger set present in the OPP table, based on the current
-  version of the hardware (already known to the operating system).
-
-  Each block present in the array of blocks in this property, represents a
-  sub-group of hardware versions supported by the OPP. i.e. <sub-group A>,
-  <sub-group B>, etc. The OPP will be enabled if _any_ of these sub-groups match
-  the hardware's version.
-
-  Each sub-group is a platform defined array representing the hierarchy of
-  hardware versions supported by the platform. For a platform with three
-  hierarchical levels of version (X.Y.Z), this field shall look like
-
-  opp-supported-hw = <X1 Y1 Z1>, <X2 Y2 Z2>, <X3 Y3 Z3>.
-
-  Each level (eg. X1) in version hierarchy is represented by a 32 bit value, one
-  bit per version and so there can be maximum 32 versions per level. Logical AND
-  (&) operation is performed for each level with the hardware's level version
-  and a non-zero output for _all_ the levels in a sub-group means the OPP is
-  supported by hardware. A value of 0xFFFFFFFF for each level in the sub-group
-  will enable the OPP for all versions for the hardware.
-
-- status: Marks the node enabled/disabled.
-
-- required-opps: This contains phandle to an OPP node in another device's OPP
-  table. It may contain an array of phandles, where each phandle points to an
-  OPP of a different device. It should not contain multiple phandles to the OPP
-  nodes in the same OPP table. This specifies the minimum required OPP of the
-  device(s), whose OPP's phandle is present in this property, for the
-  functioning of the current device at the current OPP (where this property is
-  present).
-
-Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together.
-
-/ {
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-			next-level-cache = <&L2>;
-			clocks = <&clk_controller 0>;
-			clock-names = "cpu";
-			cpu-supply = <&cpu_supply0>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-			next-level-cache = <&L2>;
-			clocks = <&clk_controller 0>;
-			clock-names = "cpu";
-			cpu-supply = <&cpu_supply0>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-	};
-
-	cpu0_opp_table: opp_table0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <975000 970000 985000>;
-			opp-microamp = <70000>;
-			clock-latency-ns = <300000>;
-			opp-suspend;
-		};
-		opp-1100000000 {
-			opp-hz = /bits/ 64 <1100000000>;
-			opp-microvolt = <1000000 980000 1010000>;
-			opp-microamp = <80000>;
-			clock-latency-ns = <310000>;
-		};
-		opp-1200000000 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <1025000>;
-			clock-latency-ns = <290000>;
-			turbo-mode;
-		};
-	};
-};
-
-Example 2: Single cluster, Quad-core Qualcom-krait, switches DVFS states
-independently.
-
-/ {
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "qcom,krait";
-			reg = <0>;
-			next-level-cache = <&L2>;
-			clocks = <&clk_controller 0>;
-			clock-names = "cpu";
-			cpu-supply = <&cpu_supply0>;
-			operating-points-v2 = <&cpu_opp_table>;
-		};
-
-		cpu@1 {
-			compatible = "qcom,krait";
-			reg = <1>;
-			next-level-cache = <&L2>;
-			clocks = <&clk_controller 1>;
-			clock-names = "cpu";
-			cpu-supply = <&cpu_supply1>;
-			operating-points-v2 = <&cpu_opp_table>;
-		};
-
-		cpu@2 {
-			compatible = "qcom,krait";
-			reg = <2>;
-			next-level-cache = <&L2>;
-			clocks = <&clk_controller 2>;
-			clock-names = "cpu";
-			cpu-supply = <&cpu_supply2>;
-			operating-points-v2 = <&cpu_opp_table>;
-		};
-
-		cpu@3 {
-			compatible = "qcom,krait";
-			reg = <3>;
-			next-level-cache = <&L2>;
-			clocks = <&clk_controller 3>;
-			clock-names = "cpu";
-			cpu-supply = <&cpu_supply3>;
-			operating-points-v2 = <&cpu_opp_table>;
-		};
-	};
-
-	cpu_opp_table: opp_table {
-		compatible = "operating-points-v2";
-
-		/*
-		 * Missing opp-shared property means CPUs switch DVFS states
-		 * independently.
-		 */
-
-		opp-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <975000 970000 985000>;
-			opp-microamp = <70000>;
-			clock-latency-ns = <300000>;
-			opp-suspend;
-		};
-		opp-1100000000 {
-			opp-hz = /bits/ 64 <1100000000>;
-			opp-microvolt = <1000000 980000 1010000>;
-			opp-microamp = <80000>;
-			clock-latency-ns = <310000>;
-		};
-		opp-1200000000 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <1025000>;
-			opp-microamp = <90000;
-			lock-latency-ns = <290000>;
-			turbo-mode;
-		};
-	};
-};
-
-Example 3: Dual-cluster, Dual-core per cluster. CPUs within a cluster switch
-DVFS state together.
-
-/ {
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a7";
-			reg = <0>;
-			next-level-cache = <&L2>;
-			clocks = <&clk_controller 0>;
-			clock-names = "cpu";
-			cpu-supply = <&cpu_supply0>;
-			operating-points-v2 = <&cluster0_opp>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a7";
-			reg = <1>;
-			next-level-cache = <&L2>;
-			clocks = <&clk_controller 0>;
-			clock-names = "cpu";
-			cpu-supply = <&cpu_supply0>;
-			operating-points-v2 = <&cluster0_opp>;
-		};
-
-		cpu@100 {
-			compatible = "arm,cortex-a15";
-			reg = <100>;
-			next-level-cache = <&L2>;
-			clocks = <&clk_controller 1>;
-			clock-names = "cpu";
-			cpu-supply = <&cpu_supply1>;
-			operating-points-v2 = <&cluster1_opp>;
-		};
-
-		cpu@101 {
-			compatible = "arm,cortex-a15";
-			reg = <101>;
-			next-level-cache = <&L2>;
-			clocks = <&clk_controller 1>;
-			clock-names = "cpu";
-			cpu-supply = <&cpu_supply1>;
-			operating-points-v2 = <&cluster1_opp>;
-		};
-	};
-
-	cluster0_opp: opp_table0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <975000 970000 985000>;
-			opp-microamp = <70000>;
-			clock-latency-ns = <300000>;
-			opp-suspend;
-		};
-		opp-1100000000 {
-			opp-hz = /bits/ 64 <1100000000>;
-			opp-microvolt = <1000000 980000 1010000>;
-			opp-microamp = <80000>;
-			clock-latency-ns = <310000>;
-		};
-		opp-1200000000 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <1025000>;
-			opp-microamp = <90000>;
-			clock-latency-ns = <290000>;
-			turbo-mode;
-		};
-	};
-
-	cluster1_opp: opp_table1 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-1300000000 {
-			opp-hz = /bits/ 64 <1300000000>;
-			opp-microvolt = <1050000 1045000 1055000>;
-			opp-microamp = <95000>;
-			clock-latency-ns = <400000>;
-			opp-suspend;
-		};
-		opp-1400000000 {
-			opp-hz = /bits/ 64 <1400000000>;
-			opp-microvolt = <1075000>;
-			opp-microamp = <100000>;
-			clock-latency-ns = <400000>;
-		};
-		opp-1500000000 {
-			opp-hz = /bits/ 64 <1500000000>;
-			opp-microvolt = <1100000 1010000 1110000>;
-			opp-microamp = <95000>;
-			clock-latency-ns = <400000>;
-			turbo-mode;
-		};
-	};
-};
-
-Example 4: Handling multiple regulators
-
-/ {
-	cpus {
-		cpu@0 {
-			compatible = "vendor,cpu-type";
-			...
-
-			vcc0-supply = <&cpu_supply0>;
-			vcc1-supply = <&cpu_supply1>;
-			vcc2-supply = <&cpu_supply2>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-	};
-
-	cpu0_opp_table: opp_table0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <970000>, /* Supply 0 */
-					<960000>, /* Supply 1 */
-					<960000>; /* Supply 2 */
-			opp-microamp =  <70000>,  /* Supply 0 */
-					<70000>,  /* Supply 1 */
-					<70000>;  /* Supply 2 */
-			clock-latency-ns = <300000>;
-		};
-
-		/* OR */
-
-		opp-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <975000 970000 985000>, /* Supply 0 */
-					<965000 960000 975000>, /* Supply 1 */
-					<965000 960000 975000>; /* Supply 2 */
-			opp-microamp =  <70000>,		/* Supply 0 */
-					<70000>,		/* Supply 1 */
-					<70000>;		/* Supply 2 */
-			clock-latency-ns = <300000>;
-		};
-
-		/* OR */
-
-		opp-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <975000 970000 985000>, /* Supply 0 */
-					<965000 960000 975000>, /* Supply 1 */
-					<965000 960000 975000>; /* Supply 2 */
-			opp-microamp =  <70000>,		/* Supply 0 */
-					<0>,			/* Supply 1 doesn't need this */
-					<70000>;		/* Supply 2 */
-			clock-latency-ns = <300000>;
-		};
-	};
-};
-
-Example 5: opp-supported-hw
-(example: three level hierarchy of versions: cuts, substrate and process)
-
-/ {
-	cpus {
-		cpu@0 {
-			compatible = "arm,cortex-a7";
-			...
-
-			cpu-supply = <&cpu_supply>
-			operating-points-v2 = <&cpu0_opp_table_slow>;
-		};
-	};
-
-	opp_table {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-600000000 {
-			/*
-			 * Supports all substrate and process versions for 0xF
-			 * cuts, i.e. only first four cuts.
-			 */
-			opp-supported-hw = <0xF 0xFFFFFFFF 0xFFFFFFFF>
-			opp-hz = /bits/ 64 <600000000>;
-			...
-		};
-
-		opp-800000000 {
-			/*
-			 * Supports:
-			 * - cuts: only one, 6th cut (represented by 6th bit).
-			 * - substrate: supports 16 different substrate versions
-			 * - process: supports 9 different process versions
-			 */
-			opp-supported-hw = <0x20 0xff0000ff 0x0000f4f0>
-			opp-hz = /bits/ 64 <800000000>;
-			...
-		};
-
-		opp-900000000 {
-			/*
-			 * Supports:
-			 * - All cuts and substrate where process version is 0x2.
-			 * - All cuts and process where substrate version is 0x2.
-			 */
-			opp-supported-hw = <0xFFFFFFFF 0xFFFFFFFF 0x02>, <0xFFFFFFFF 0x01 0xFFFFFFFF>
-			opp-hz = /bits/ 64 <900000000>;
-			...
-		};
-	};
-};
-
-Example 6: opp-microvolt-<name>, opp-microamp-<name>:
-(example: device with two possible microvolt ranges: slow and fast)
-
-/ {
-	cpus {
-		cpu@0 {
-			compatible = "arm,cortex-a7";
-			...
-
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-	};
-
-	cpu0_opp_table: opp_table0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt-slow = <915000 900000 925000>;
-			opp-microvolt-fast = <975000 970000 985000>;
-			opp-microamp-slow =  <70000>;
-			opp-microamp-fast =  <71000>;
-		};
-
-		opp-1200000000 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt-slow = <915000 900000 925000>, /* Supply vcc0 */
-					      <925000 910000 935000>; /* Supply vcc1 */
-			opp-microvolt-fast = <975000 970000 985000>, /* Supply vcc0 */
-					     <965000 960000 975000>; /* Supply vcc1 */
-			opp-microamp =  <70000>; /* Will be used for both slow/fast */
-		};
-	};
-};
-
-Example 7: Single cluster Quad-core ARM cortex A53, OPP points from firmware,
-distinct clock controls but two sets of clock/voltage/current lines.
-
-/ {
-	cpus {
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x100>;
-			next-level-cache = <&A53_L2>;
-			clocks = <&dvfs_controller 0>;
-			operating-points-v2 = <&cpu_opp0_table>;
-		};
-		cpu@1 {
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x101>;
-			next-level-cache = <&A53_L2>;
-			clocks = <&dvfs_controller 1>;
-			operating-points-v2 = <&cpu_opp0_table>;
-		};
-		cpu@2 {
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x102>;
-			next-level-cache = <&A53_L2>;
-			clocks = <&dvfs_controller 2>;
-			operating-points-v2 = <&cpu_opp1_table>;
-		};
-		cpu@3 {
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x103>;
-			next-level-cache = <&A53_L2>;
-			clocks = <&dvfs_controller 3>;
-			operating-points-v2 = <&cpu_opp1_table>;
-		};
-
-	};
-
-	cpu_opp0_table: opp0_table {
-		compatible = "operating-points-v2";
-		opp-shared;
-	};
-
-	cpu_opp1_table: opp1_table {
-		compatible = "operating-points-v2";
-		opp-shared;
-	};
-};
