diff mbox series

[v4,4/4] arm64: dts: qcom: sdm670: add opps for peripherals

Message ID 20230111005155.50452-5-mailingradian@gmail.com
State Accepted
Commit 17289c0165bdb61a585e8e937b80defc376dbfde
Headers show
Series SDM670 Interconnects | expand

Commit Message

Richard Acayan Jan. 11, 2023, 12:51 a.m. UTC 
The interconnects are now in place. Add Operating Performance Points for
them to allow the kernel to properly manage them.

Signed-off-by: Richard Acayan <mailingradian@gmail.com>
---
 arch/arm64/boot/dts/qcom/sdm670.dtsi | 109 +++++++++++++++++++++++++++
 1 file changed, 109 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi
index 02f14692dd9d..c5f839dd1c6e 100644
--- a/arch/arm64/boot/dts/qcom/sdm670.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi
@@ -10,6 +10,7 @@ 
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,sdm670-rpmh.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/phy/phy-qcom-qusb2.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
@@ -430,6 +431,10 @@  sdhc_1: mmc@7c4000 {
 				 <&gcc GCC_SDCC1_ICE_CORE_CLK>,
 				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>;
 			clock-names = "iface", "core", "xo", "ice", "bus";
+			interconnects = <&aggre1_noc MASTER_EMMC 0 &aggre1_noc SLAVE_A1NOC_SNOC 0>,
+					<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_EMMC_CFG 0>;
+			interconnect-names = "sdhc-ddr", "cpu-sdhc";
+			operating-points-v2 = <&sdhc1_opp_table>;
 
 			iommus = <&apps_smmu 0x140 0xf>;
 
@@ -442,6 +447,38 @@  sdhc_1: mmc@7c4000 {
 			non-removable;
 
 			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-20000000 {
+					opp-hz = /bits/ 64 <20000000>;
+					required-opps = <&rpmhpd_opp_min_svs>;
+					opp-peak-kBps = <80000 80000>;
+					opp-avg-kBps = <52286 80000>;
+				};
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <200000 100000>;
+					opp-avg-kBps = <130718 100000>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+					opp-peak-kBps = <200000 130000>;
+					opp-avg-kBps = <130718 130000>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <4096000 4096000>;
+					opp-avg-kBps = <1338562 1338562>;
+				};
+			};
 		};
 
 		gpi_dma0: dma-controller@800000 {
@@ -477,6 +514,8 @@  qupv3_id_0: geniqup@8c0000 {
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
+			interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>;
+			interconnect-names = "qup-core";
 			status = "disabled";
 
 			i2c0: i2c@880000 {
@@ -490,6 +529,10 @@  i2c0: i2c@880000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -507,6 +550,10 @@  i2c1: i2c@884000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -524,6 +571,10 @@  i2c2: i2c@888000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -541,6 +592,10 @@  i2c3: i2c@88c000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -558,6 +613,10 @@  i2c4: i2c@890000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -575,6 +634,10 @@  i2c5: i2c@894000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -592,6 +655,10 @@  i2c6: i2c@898000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -609,6 +676,10 @@  i2c7: i2c@89c000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 7 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -649,6 +720,8 @@  qupv3_id_1: geniqup@ac0000 {
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
+			interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>;
+			interconnect-names = "qup-core";
 			status = "disabled";
 
 			i2c8: i2c@a80000 {
@@ -662,6 +735,10 @@  i2c8: i2c@a80000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -679,6 +756,10 @@  i2c9: i2c@a84000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -696,6 +777,10 @@  i2c10: i2c@a88000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -713,6 +798,10 @@  i2c11: i2c@a8c000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -730,6 +819,10 @@  i2c12: i2c@a90000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -747,6 +840,10 @@  i2c13: i2c@a94000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -764,6 +861,10 @@  i2c14: i2c@a98000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -781,6 +882,10 @@  i2c15: i2c@a9c000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 7 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -1028,6 +1133,10 @@  usb_1: usb@a6f8800 {
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 
+			interconnects = <&aggre2_noc MASTER_USB3 0 &mem_noc SLAVE_EBI_CH0 0>,
+					<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
 			status = "disabled";
 
 			usb_1_dwc3: usb@a600000 {