From patchwork Tue Feb 21 18:06:57 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Daniel Lezcano X-Patchwork-Id: 655918 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 38347C64ED6 for ; Tue, 21 Feb 2023 18:08:39 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231684AbjBUSIh (ORCPT ); Tue, 21 Feb 2023 13:08:37 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:58930 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231733AbjBUSIG (ORCPT ); Tue, 21 Feb 2023 13:08:06 -0500 Received: from mail-wm1-x336.google.com (mail-wm1-x336.google.com [IPv6:2a00:1450:4864:20::336]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 00F76302B0 for ; Tue, 21 Feb 2023 10:07:42 -0800 (PST) Received: by mail-wm1-x336.google.com with SMTP id o14so4240544wms.1 for ; Tue, 21 Feb 2023 10:07:42 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=ybdI0IDIbs7xxv4O7dmGIc6IrVak05gnBssoGsWFttI=; b=S3JYs/V/QkQilYyWNhAR1x5Law7jkReK1KkgupaWXXQnXpVXqCTHaJnv9gYFr65fM8 D34fnRLoPJCAp02cGXYTXeaixJdRCExsJiGXGcCixIoqojKZJatk2s1Kmo0aGYi2yQPq frkyGKmQvvi0qQwv4Himto9dzx/M1Lw04bfla0j77rnuJdpNxl/zTjVsloO+wdVJLYCh oOQrCxN5/fy2LUXBYUzo4Or5a+t9v3fgoPnWcAAVrWYCxJr3j7eWBW40LfLxQl+PXZLa JyXsz5z2MiLrouO2c+izzWoQlbCPF9KJCnnNwO1LIpARMNy5Cp8t8Da0V0uFwWzNwCaN P8hw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=ybdI0IDIbs7xxv4O7dmGIc6IrVak05gnBssoGsWFttI=; b=X8pSBTuZkD5k5aVOXJNhJrbyiMTVXnNEenbhCwK7ojNoxbbb3o+DJGig9gNBr3XXWS t3frn8OzgJrBnEx9WpdeJ1QDnSMuaSUw40Eb1fIxKr1YtgorCAPONfciQjAv7QoVnuIA qEYxvF/z9AraYsDlHrXPlPLA+68qPA1X7qwk0y83Ed6vBTkfd/OBKAt0ewtg9ybUo27q 3LbjTWjBfUK5BadTZL3bfVXHXk3phxEICIzs7EkAXhlKXO0TZvZnCqThdt5S+WE1su8s yV2nrKGkttz8ICvQlHpXDMcrtiIJXt7aTjfUa26lJP1pS8zwCPtz6o7jaMZC36UhAGWQ o8yA== X-Gm-Message-State: AO0yUKWSYXRORWRvlB8awoykZ6/uASdR/BQjw0+IMHQ1hvK1msUlmoEi INMswwElDNaJY4RTVnINKGCUbw== X-Google-Smtp-Source: AK7set8Fc5D0Y2rFo7dzFnRmFcTUeKLqk0/kpXI6eownDWC3yz2ZFcrOUA6dU0PWDttIcQhPq3wAdA== X-Received: by 2002:a05:600c:2ad6:b0:3df:f2a5:49e0 with SMTP id t22-20020a05600c2ad600b003dff2a549e0mr5089896wme.40.1677002861334; Tue, 21 Feb 2023 10:07:41 -0800 (PST) Received: from mai.box.freepro.com ([2a05:6e02:1041:c10:1e9:315c:bb40:e382]) by smtp.gmail.com with ESMTPSA id c128-20020a1c3586000000b003e21558ee9dsm5107815wma.2.2023.02.21.10.07.40 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 21 Feb 2023 10:07:41 -0800 (PST) From: Daniel Lezcano To: rafael@kernel.org, daniel.lezcano@linaro.org Cc: linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org, Miquel Raynal , Amit Kucheria , Zhang Rui , Markus Mayer , Broadcom internal kernel review list , Florian Fainelli , Shawn Guo , Sascha Hauer , Pengutronix Kernel Team , Fabio Estevam , NXP Linux Team , Heiko Stuebner , linux-arm-kernel@lists.infradead.org (moderated list:BROADCOM BCM7XXX ARM ARCHITECTURE), linux-rockchip@lists.infradead.org (open list:ARM/Rockchip SoC support) Subject: [PATCH v2 03/16] thermal: Remove debug or error messages in get_temp() ops Date: Tue, 21 Feb 2023 19:06:57 +0100 Message-Id: <20230221180710.2781027-4-daniel.lezcano@linaro.org> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20230221180710.2781027-1-daniel.lezcano@linaro.org> References: <20230221180710.2781027-1-daniel.lezcano@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org Some get_temp() ops implementation are showing an error or a debug message if the reading of the sensor fails. The debug message is already displayed from the call site of this ops. So we can remove it. On the other side, the error should not be displayed because in production that can raise tons of messages. Finally, some drivers are showing a debug message with the temperature, this is also accessible through the trace from the core code in the temperature_update() function. Another benefit is the dev_* messages are accessing the thermal zone device field from the structure, so we encapsulate even more the code by preventing these accesses. Remove those messages. Signed-off-by: Daniel Lezcano Reviewed-by: Miquel Raynal #Armada Acked-by: Florian Fainelli #brcmstb_thermal.c --- drivers/thermal/armada_thermal.c | 10 ++-------- drivers/thermal/broadcom/brcmstb_thermal.c | 4 +--- drivers/thermal/dove_thermal.c | 5 +---- drivers/thermal/hisi_thermal.c | 3 --- drivers/thermal/imx_sc_thermal.c | 5 +---- drivers/thermal/imx_thermal.c | 4 +--- drivers/thermal/kirkwood_thermal.c | 5 +---- drivers/thermal/max77620_thermal.c | 4 +--- drivers/thermal/rockchip_thermal.c | 3 --- drivers/thermal/st/st_thermal.c | 2 -- drivers/thermal/thermal-generic-adc.c | 5 ++--- 11 files changed, 10 insertions(+), 40 deletions(-) diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c index ebd606861a61..0e8dfa6a7757 100644 --- a/drivers/thermal/armada_thermal.c +++ b/drivers/thermal/armada_thermal.c @@ -360,11 +360,8 @@ static int armada_select_channel(struct armada_thermal_priv *priv, int channel) * we must absolutely wait for the sensor validity bit to ensure we read * actual data. */ - if (armada_wait_sensor_validity(priv)) { - dev_err(priv->dev, - "Temperature sensor reading not valid\n"); + if (armada_wait_sensor_validity(priv)) return -EIO; - } return 0; } @@ -402,11 +399,8 @@ static int armada_get_temp_legacy(struct thermal_zone_device *thermal, int ret; /* Valid check */ - if (!armada_is_valid(priv)) { - dev_err(priv->dev, - "Temperature sensor reading not valid\n"); + if (!armada_is_valid(priv)) return -EIO; - } /* Do the actual reading */ ret = armada_read_sensor(priv, temp); diff --git a/drivers/thermal/broadcom/brcmstb_thermal.c b/drivers/thermal/broadcom/brcmstb_thermal.c index 60173cc83c46..72d1dbe60b8f 100644 --- a/drivers/thermal/broadcom/brcmstb_thermal.c +++ b/drivers/thermal/broadcom/brcmstb_thermal.c @@ -158,10 +158,8 @@ static int brcmstb_get_temp(struct thermal_zone_device *tz, int *temp) val = __raw_readl(priv->tmon_base + AVS_TMON_STATUS); - if (!(val & AVS_TMON_STATUS_valid_msk)) { - dev_err(priv->dev, "reading not valid\n"); + if (!(val & AVS_TMON_STATUS_valid_msk)) return -EIO; - } val = (val & AVS_TMON_STATUS_data_msk) >> AVS_TMON_STATUS_data_shift; diff --git a/drivers/thermal/dove_thermal.c b/drivers/thermal/dove_thermal.c index 6db1882e8229..9954040d1d2c 100644 --- a/drivers/thermal/dove_thermal.c +++ b/drivers/thermal/dove_thermal.c @@ -91,11 +91,8 @@ static int dove_get_temp(struct thermal_zone_device *thermal, /* Valid check */ reg = readl_relaxed(priv->control + PMU_TEMP_DIOD_CTRL1_REG); - if ((reg & PMU_TDC1_TEMP_VALID_MASK) == 0x0) { - dev_err(&thermal->device, - "Temperature sensor reading not valid\n"); + if ((reg & PMU_TDC1_TEMP_VALID_MASK) == 0x0) return -EIO; - } /* * Calculate temperature. According to Marvell internal diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c index f3a374266fa0..0d135b8a5b62 100644 --- a/drivers/thermal/hisi_thermal.c +++ b/drivers/thermal/hisi_thermal.c @@ -436,9 +436,6 @@ static int hisi_thermal_get_temp(struct thermal_zone_device *tz, int *temp) *temp = data->ops->get_temp(sensor); - dev_dbg(&data->pdev->dev, "tzd=%p, id=%d, temp=%d, thres=%d\n", - sensor->tzd, sensor->id, *temp, sensor->thres_temp); - return 0; } diff --git a/drivers/thermal/imx_sc_thermal.c b/drivers/thermal/imx_sc_thermal.c index ddde4bdfc94a..2d7a6bd2846b 100644 --- a/drivers/thermal/imx_sc_thermal.c +++ b/drivers/thermal/imx_sc_thermal.c @@ -58,11 +58,8 @@ static int imx_sc_thermal_get_temp(struct thermal_zone_device *tz, int *temp) hdr->size = 2; ret = imx_scu_call_rpc(thermal_ipc_handle, &msg, true); - if (ret) { - dev_err(&sensor->tzd->device, "read temp sensor %d failed, ret %d\n", - sensor->resource_id, ret); + if (ret) return ret; - } *temp = msg.data.resp.celsius * 1000 + msg.data.resp.tenths * 100; diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c index a22b8086a209..a0b8de269986 100644 --- a/drivers/thermal/imx_thermal.c +++ b/drivers/thermal/imx_thermal.c @@ -265,10 +265,8 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp) regmap_read(map, soc_data->temp_data, &val); - if ((val & soc_data->temp_valid_mask) == 0) { - dev_dbg(&tz->device, "temp measurement never finished\n"); + if ((val & soc_data->temp_valid_mask) == 0) return -EAGAIN; - } n_meas = (val & soc_data->temp_value_mask) >> soc_data->temp_value_shift; diff --git a/drivers/thermal/kirkwood_thermal.c b/drivers/thermal/kirkwood_thermal.c index 92b3ce426b9d..668747bd86ef 100644 --- a/drivers/thermal/kirkwood_thermal.c +++ b/drivers/thermal/kirkwood_thermal.c @@ -33,11 +33,8 @@ static int kirkwood_get_temp(struct thermal_zone_device *thermal, /* Valid check */ if (!((reg >> KIRKWOOD_THERMAL_VALID_OFFSET) & - KIRKWOOD_THERMAL_VALID_MASK)) { - dev_err(&thermal->device, - "Temperature sensor reading not valid\n"); + KIRKWOOD_THERMAL_VALID_MASK)) return -EIO; - } /* * Calculate temperature. According to Marvell internal diff --git a/drivers/thermal/max77620_thermal.c b/drivers/thermal/max77620_thermal.c index bf1679765f1b..61c7622d9945 100644 --- a/drivers/thermal/max77620_thermal.c +++ b/drivers/thermal/max77620_thermal.c @@ -51,10 +51,8 @@ static int max77620_thermal_read_temp(struct thermal_zone_device *tz, int *temp) int ret; ret = regmap_read(mtherm->rmap, MAX77620_REG_STATLBT, &val); - if (ret < 0) { - dev_err(mtherm->dev, "Failed to read STATLBT: %d\n", ret); + if (ret < 0) return ret; - } if (val & MAX77620_IRQ_TJALRM2_MASK) *temp = MAX77620_TJALARM2_TEMP; diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c index 8a51eb26e798..71e533df563a 100644 --- a/drivers/thermal/rockchip_thermal.c +++ b/drivers/thermal/rockchip_thermal.c @@ -1233,9 +1233,6 @@ static int rockchip_thermal_get_temp(struct thermal_zone_device *tz, int *out_te retval = tsadc->get_temp(&tsadc->table, sensor->id, thermal->regs, out_temp); - dev_dbg(&thermal->pdev->dev, "sensor %d - temp: %d, retval: %d\n", - sensor->id, *out_temp, retval); - return retval; } diff --git a/drivers/thermal/st/st_thermal.c b/drivers/thermal/st/st_thermal.c index 1009f08e64e3..4d39626a4345 100644 --- a/drivers/thermal/st/st_thermal.c +++ b/drivers/thermal/st/st_thermal.c @@ -127,8 +127,6 @@ static int st_thermal_get_temp(struct thermal_zone_device *th, int *temperature) temp += sensor->cdata->temp_adjust_val; temp = mcelsius(temp); - dev_dbg(dev, "temperature: %d\n", temp); - *temperature = temp; return 0; diff --git a/drivers/thermal/thermal-generic-adc.c b/drivers/thermal/thermal-generic-adc.c index 2c283e762d81..017b0ce52122 100644 --- a/drivers/thermal/thermal-generic-adc.c +++ b/drivers/thermal/thermal-generic-adc.c @@ -59,10 +59,9 @@ static int gadc_thermal_get_temp(struct thermal_zone_device *tz, int *temp) int ret; ret = iio_read_channel_processed(gti->channel, &val); - if (ret < 0) { - dev_err(gti->dev, "IIO channel read failed %d\n", ret); + if (ret < 0) return ret; - } + *temp = gadc_thermal_adc_to_temp(gti, val); return 0;