diff mbox series

[V5,4/5] clk: qcom: Use HW_CTRL_TRIGGER flag to switch video GDSC to HW mode

Message ID 20240315111046.22136-5-quic_jkona@quicinc.com
State Superseded
Headers show
Series PM: domains: Add control for switching back and forth to HW control | expand

Commit Message

Jagadeesh Kona March 15, 2024, 11:10 a.m. UTC 
The HW_CTRL_TRIGGER flag provides flexibility to switch the GDSC
mode as per the consumers requirement compared to HW_CTRL flag which
directly switches the GDSC mode as part of gdsc enable/disable.
Hence use HW_CTRL_TRIGGER flag for vcodec GDSC's to allow venus driver
to switch the vcodec GDSC to HW/SW control modes at runtime using
dev_pm_genpd_set_hwmode() API.

Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 drivers/clk/qcom/videocc-sc7280.c | 2 +-
 drivers/clk/qcom/videocc-sm8250.c | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/clk/qcom/videocc-sc7280.c b/drivers/clk/qcom/videocc-sc7280.c
index cdd59c6f60df..d55613a47ff7 100644
--- a/drivers/clk/qcom/videocc-sc7280.c
+++ b/drivers/clk/qcom/videocc-sc7280.c
@@ -236,7 +236,7 @@  static struct gdsc mvs0_gdsc = {
 		.name = "mvs0_gdsc",
 	},
 	.pwrsts = PWRSTS_OFF_ON,
-	.flags = HW_CTRL | RETAIN_FF_ENABLE,
+	.flags = HW_CTRL_TRIGGER | RETAIN_FF_ENABLE,
 };
 
 static struct gdsc mvsc_gdsc = {
diff --git a/drivers/clk/qcom/videocc-sm8250.c b/drivers/clk/qcom/videocc-sm8250.c
index 016b596e03b3..cac10ccd362e 100644
--- a/drivers/clk/qcom/videocc-sm8250.c
+++ b/drivers/clk/qcom/videocc-sm8250.c
@@ -293,7 +293,7 @@  static struct gdsc mvs0_gdsc = {
 	.pd = {
 		.name = "mvs0_gdsc",
 	},
-	.flags = HW_CTRL,
+	.flags = HW_CTRL_TRIGGER,
 	.pwrsts = PWRSTS_OFF_ON,
 };
 
@@ -302,7 +302,7 @@  static struct gdsc mvs1_gdsc = {
 	.pd = {
 		.name = "mvs1_gdsc",
 	},
-	.flags = HW_CTRL,
+	.flags = HW_CTRL_TRIGGER,
 	.pwrsts = PWRSTS_OFF_ON,
 };