@@ -5,3 +5,11 @@
&switch0 {
compatible = "realtek,rtl9302c-switch", "syscon", "simple-mfd";
};
+
+&i2c0 {
+ compatible = "realtek,rtl9302c-i2c", "realtek,rtl9301-i2c";
+};
+
+&i2c1 {
+ compatible = "realtek,rtl9302c-i2c", "realtek,rtl9301-i2c";
+};
@@ -41,6 +41,22 @@ reboot@c {
reg = <0x0c 0x4>;
value = <0x01>;
};
+
+ i2c0: i2c@36c {
+ compatible = "realtek,rtl9301-i2c";
+ reg = <0x36c 0x14>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@388 {
+ compatible = "realtek,rtl9301-i2c";
+ reg = <0x388 0x14>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
};
Add the I2C controllers that are part of the RTL9300 SoC. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> --- Notes: Changes in v6: - Drop wildcard compatible - Put status = "disabled" at the end Changes in v5: - Update compatibles Changes in v4: - Skipped due to combining patch series Changes in v3: - None Changes in v2: - Use reg property arch/mips/boot/dts/realtek/rtl9302c.dtsi | 8 ++++++++ arch/mips/boot/dts/realtek/rtl930x.dtsi | 16 ++++++++++++++++ 2 files changed, 24 insertions(+)