@@ -4,6 +4,7 @@ config TH1520_PM_DOMAINS
tristate "Support TH1520 Power Domains"
depends on TH1520_AON_PROTOCOL
select REGMAP_MMIO
+ select AUXILIARY_BUS
help
This driver enables power domain management for the T-HEAD
TH-1520 SoC. On this SoC there are number of power domains,
@@ -5,8 +5,10 @@
* Author: Michal Wilczynski <m.wilczynski@samsung.com>
*/
+#include <linux/auxiliary_bus.h>
#include <linux/firmware/thead/thead,th1520-aon.h>
#include <linux/slab.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
@@ -128,6 +130,51 @@ static void th1520_pd_init_all_off(struct generic_pm_domain **domains,
}
}
+static void th1520_pd_pwrseq_unregister_adev(void *adev)
+{
+ auxiliary_device_delete(adev);
+ auxiliary_device_uninit(adev);
+}
+
+static int th1520_pd_pwrseq_gpu_init(struct device *dev)
+{
+ struct auxiliary_device *adev;
+ int ret;
+
+ /*
+ * Correctly check only for the property's existence in the DT node.
+ * We don't need to get/claim the reset here; that is the job of
+ * the auxiliary driver that we are about to spawn.
+ */
+ if (of_property_match_string(dev->of_node, "reset-names",
+ "gpu-clkgen") < 0)
+ /*
+ * This is not an error. It simply means the optional sequencer
+ * is not described in the device tree.
+ */
+ return 0;
+
+ adev = devm_kzalloc(dev, sizeof(*adev), GFP_KERNEL);
+ if (!adev)
+ return -ENOMEM;
+
+ adev->name = "pwrseq-gpu";
+ adev->dev.parent = dev;
+
+ ret = auxiliary_device_init(adev);
+ if (ret)
+ return ret;
+
+ ret = auxiliary_device_add(adev);
+ if (ret) {
+ auxiliary_device_uninit(adev);
+ return ret;
+ }
+
+ return devm_add_action_or_reset(dev, th1520_pd_pwrseq_unregister_adev,
+ adev);
+}
+
static int th1520_pd_probe(struct platform_device *pdev)
{
struct generic_pm_domain **domains;
@@ -186,8 +233,14 @@ static int th1520_pd_probe(struct platform_device *pdev)
if (ret)
goto err_clean_genpd;
+ ret = th1520_pd_pwrseq_gpu_init(dev);
+ if (ret)
+ goto err_clean_provider;
+
return 0;
+err_clean_provider:
+ of_genpd_del_provider(dev->of_node);
err_clean_genpd:
for (i--; i >= 0; i--)
pm_genpd_remove(domains[i]);
In order to support the complex power sequencing required by the TH1520 GPU, the AON power domain driver must be responsible for initiating the corresponding sequencer driver. This functionality is specific to platforms where the GPU power sequencing hardware is controlled by the AON block. Extend the AON power domain driver to check for the presence of the "gpu-clkgen" reset in its own device tree node. If the property is found, create and register a new auxiliary device. This device acts as a proxy that allows the dedicated `pwrseq-thead-gpu` auxiliary driver to bind and take control of the sequencing logic. Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com> --- drivers/pmdomain/thead/Kconfig | 1 + drivers/pmdomain/thead/th1520-pm-domains.c | 53 ++++++++++++++++++++++++++++++ 2 files changed, 54 insertions(+)