diff mbox series

[v4,08/10] ACPI: thermal: Rework thermal_get_trend()

Message ID 23199624.6Emhk5qWAg@kreacher
State Superseded
Headers show
Series ACPI: thermal: Use trip point table to register thermal zones | expand

Commit Message

Rafael J. Wysocki Aug. 4, 2023, 9:22 p.m. UTC 
From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Rework the ACPI thermal driver's .get_trend() callback function,
thermal_get_trend(), so that it does not call thermal_get_trip_type()
and thermal_get_trip_temp() which are going to be dropped.

This reduces the overhead of the function too, because it will always
carry out a trip point lookup once after the change.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---

v3 -> v4:
   * Adjust for the lack of a direct way to get from the local trip point
     representations to trips[i].

v2 -> v3: Rebase on top of the v2 of the previous patch.

v1 -> v2:
   * Do not acquire thermal_check_lock in thermal_get_trend() (lockdep
     would complain about this, because it is hold around thermal zone
     locking and .get_trend() runs under the thermal zone lock).  The
     thermal zone locking added in the previous patches is sufficient
     to protect this code.
   * Check trips against invalid temperature values.
   * Return an error for trips other than passive and active.
---
 drivers/acpi/thermal.c |   68 +++++++++++++++++++++++++++----------------------
 1 file changed, 38 insertions(+), 30 deletions(-)
diff mbox series

Patch

Index: linux-pm/drivers/acpi/thermal.c
===================================================================
--- linux-pm.orig/drivers/acpi/thermal.c
+++ linux-pm/drivers/acpi/thermal.c
@@ -616,46 +616,54 @@  static int thermal_get_crit_temp(struct
 }
 
 static int thermal_get_trend(struct thermal_zone_device *thermal,
-			     int trip, enum thermal_trend *trend)
+			     int trip_index, enum thermal_trend *trend)
 {
 	struct acpi_thermal *tz = thermal_zone_device_priv(thermal);
-	enum thermal_trip_type type;
-	int i;
+	int t, i;
 
-	if (thermal_get_trip_type(thermal, trip, &type))
+	if (!tz || trip_index < 0)
 		return -EINVAL;
 
-	if (type == THERMAL_TRIP_ACTIVE) {
-		int trip_temp;
-		int temp = deci_kelvin_to_millicelsius_with_offset(
-					tz->temperature, tz->kelvin_offset);
-		if (thermal_get_trip_temp(thermal, trip, &trip_temp))
-			return -EINVAL;
+	if (tz->trips.critical.valid)
+		trip_index--;
 
-		if (temp > trip_temp) {
+	if (tz->trips.hot.valid)
+		trip_index--;
+
+	if (trip_index < 0)
+		return -EINVAL;
+
+	if (tz->trips.passive.valid && !trip_index--) {
+		t = tz->trips.passive.tc1 * (tz->temperature -
+						tz->last_temperature) +
+			tz->trips.passive.tc2 * (tz->temperature -
+						tz->trips.passive.temperature);
+		if (t > 0)
 			*trend = THERMAL_TREND_RAISING;
-			return 0;
-		} else {
-			/* Fall back on default trend */
-			return -EINVAL;
-		}
+		else if (t < 0)
+			*trend = THERMAL_TREND_DROPPING;
+		else
+			*trend = THERMAL_TREND_STABLE;
+
+		return 0;
 	}
 
-	/*
-	 * tz->temperature has already been updated by generic thermal layer,
-	 * before this callback being invoked
-	 */
-	i = tz->trips.passive.tc1 * (tz->temperature - tz->last_temperature) +
-	    tz->trips.passive.tc2 * (tz->temperature - tz->trips.passive.temperature);
-
-	if (i > 0)
-		*trend = THERMAL_TREND_RAISING;
-	else if (i < 0)
-		*trend = THERMAL_TREND_DROPPING;
-	else
-		*trend = THERMAL_TREND_STABLE;
+	t = acpi_thermal_temp(tz, tz->temperature);
+
+	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
+		if (tz->trips.active[i].valid && !trip_index--) {
+			int trip_temp;
+
+			trip_temp = acpi_thermal_temp(tz, tz->trips.active[i].temperature);
+			if (t > trip_temp) {
+				*trend = THERMAL_TREND_RAISING;
+				return 0;
+			}
+			break;
+		}
+	}
 
-	return 0;
+	return -EINVAL;
 }
 
 static void acpi_thermal_zone_device_hot(struct thermal_zone_device *thermal)