diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index 8903803020..de948835f8 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -203,6 +203,16 @@ config POWER_RESET_KEYSTONE
 	help
 	  Reboot support for the KEYSTONE SoCs.
 
+config POWER_RESET_LINKSTATION
+	tristate "Buffalo LinkStation power-off driver"
+	depends on ARCH_MVEBU || COMPILE_TEST
+	depends on OF_MDIO && PHYLIB
+	help
+	  Some Buffalo LinkStations use a LED output at the ethernet PHY
+	  to inform the board that a power off operation must be performed 
+	  after restarting. This driver sets the LED to the proper state
+	  for restarting or powering off.
+
 config POWER_RESET_SYSCON
 	bool "Generic SYSCON regmap reset driver"
 	depends on OF
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index da37f8b851..a8c83d2470 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_POWER_RESET_GEMINI_POWEROFF) += gemini-poweroff.o
 obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
 obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
 obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
+obj-${CONFIG_POWER_RESET_LINKSTATION} += linkstation-poweroff.o
 obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
 obj-$(CONFIG_POWER_RESET_MT6323) += mt6323-poweroff.o
 obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o
diff --git a/drivers/power/reset/linkstation-poweroff.c b/drivers/power/reset/linkstation-poweroff.c
new file mode 100644
index 0000000000..b5a4cc2c2b
--- /dev/null
+++ b/drivers/power/reset/linkstation-poweroff.c
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * LinkStation power off restart driver
+ * Copyright (C) 2020 Daniel González Cabanelas <dgcbueu@gmail.com>
+ */
+
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/of.h>
+#include <linux/of_mdio.h>
+#include <linux/of_platform.h>
+#include <linux/reboot.h>
+#include <linux/phy.h>
+
+#define MII_MARVELL_LED_PAGE	3
+#define MII_PHY_LED_CTRL	16
+
+#define LED2_OFF		(0x8 << 8)
+#define LED2_ON			(0x9 << 8)
+#define LEDMASK			GENMASK(11,8)
+
+static struct phy_device *phydev;
+
+static void mvphy_reg_led(u16 data)
+{
+	int rc;
+	rc = phy_modify_paged(phydev, MII_MARVELL_LED_PAGE,
+			      MII_PHY_LED_CTRL, LEDMASK, data);
+	if (rc < 0)
+		dev_err(&phydev->mdio.dev,
+			"LED2 write register failed, %d\n", rc);
+}
+
+static int linkstation_reboot_notifier(struct notifier_block *nb,
+				       unsigned long action, void *unused)
+{
+	if (action == SYS_RESTART)
+		mvphy_reg_led(LED2_ON);
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block linkstation_reboot_nb = {
+	.notifier_call = linkstation_reboot_notifier,
+};
+
+static void linkstation_poweroff(void)
+{
+	unregister_reboot_notifier(&linkstation_reboot_nb);
+	mvphy_reg_led(LED2_OFF);
+
+	kernel_restart("Power off");
+}
+
+static int linkstation_poweroff_probe(struct platform_device *pdev)
+{
+	struct mii_bus *bus;
+	struct device_node *dn;
+
+	dn = of_parse_phandle(pdev->dev.of_node, "phy-handle,led", 0);
+
+	if (dn) {
+		phydev = of_phy_find_device(dn);
+		of_node_put(dn);
+	} else {
+		dn = of_find_node_by_name(NULL, "mdio");
+		if (!dn)
+			return -ENODEV;
+
+		bus = of_mdio_find_bus(dn);
+		of_node_put(dn);
+		if (!bus)
+			return -EPROBE_DEFER;
+
+		phydev = phy_find_first(bus);
+	}
+
+	if (!phydev)
+		return -ENODEV;
+
+	register_reboot_notifier(&linkstation_reboot_nb);
+	pm_power_off = linkstation_poweroff;
+
+	dev_info(&pdev->dev, "PHY [%s]\n", phydev_name(phydev));
+
+	return 0;
+}
+
+static int linkstation_poweroff_remove(struct platform_device *pdev)
+{
+	pm_power_off = NULL;
+	unregister_reboot_notifier(&linkstation_reboot_nb);
+
+	return 0;
+}
+
+static const struct of_device_id ls_poweroff_of_match[] = {
+	{ .compatible = "linkstation,power-off", },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(of, ls_poweroff_of_match);
+
+static struct platform_driver linkstation_poweroff_driver = {
+	.probe = linkstation_poweroff_probe,
+	.remove = linkstation_poweroff_remove,
+	.driver = {
+		.name = "linkstation_power_off",
+		.of_match_table = ls_poweroff_of_match,
+	},
+};
+
+module_platform_driver(linkstation_poweroff_driver);
+
+MODULE_AUTHOR("Daniel González Cabanelas <dgcbueu@gmail.com>");
+MODULE_DESCRIPTION("LinkStation power off driver");
+MODULE_LICENSE("GPL v2");
